• Conical design
• 5.91 in. wire length
• Includes butt type connectors, without plug
• Designed to fit screw-in type bungs

• Tested to ensure highest level of quality and reliability
• Helps reduce harmful emissions and extends catalyst life

Part Number	Brand	Price
USOS-4000	Replacement	$27.56

• 6.69 in. wire length
• Includes butt type connectors, without plug
• Designed to fit screw-in type bungs

• Tested to ensure highest level of quality and reliability
• Helps reduce harmful emissions and extends catalyst life

Part Number	Brand	Price
USOS-3000	Replacement	$36.43

• 15.75 in. wire length
• Threaded-in type, male connector

• Tested to ensure highest level of quality and reliability
• Helps reduce harmful emissions and extends catalyst life

Part Number	Brand	Price
ARBM960917	Replacement	$46.69

• 17.75 in. wire length
• Threaded-in type, male connector

• Tested to ensure highest level of quality and reliability
• Helps reduce harmful emissions and extends catalyst life

Part Number	Brand	Price
REPM960901	Replacement	$32.47

OXYGEN SENSOR, HEATED, 4-WIRE, SOLD INDIVIDUALLY

This REPLACEMENT oxygen sensor features stainless steel shell, hex nut, shield, Teflon-covered insulated wires, high-temperature rubber internal and external seals, and threaded tube coated with anti-seize compound. Includes easy-to-follow instructions.

Specifications:

• 0-1 V, 15.4 in. wire length
• Threaded-in type, includes connector

Benefits:

• Tested to ensure highest level of quality and reliability
• Helps reduce harmful emissions and extends catalyst life

Part Number	Brand	Price
REPF960904	Replacement	$31.14

• 4-wire
• 26 in. wire length
• Planar design

• Manufactured with a two-foot length sensor wire
• Uses a submersible patented connection system that protects against contamination and withstands the effects of extreme temperatures and engine vibration
• Posi-lock connectors that can be unscrewed and reconnected in case of a wiring mistake

Part Number	Brand	Price
BS15733	Bosch	$61.48

• 4-wire
• 15.4 in. wire length
• 0-1 V
• Heated
• Thread-in mounting style
• Includes wiring harness

• Constructed of premium ceramic technology that incorporates Zirconium or Titania and Yttrium for superior protection against mechanical and thermal shock
• Patented catalytically activated fine particle filter prevents contamination for extended life and ensures precise voltage to the engine's emission control computer, while a second filter doubles protection against exhaust gas contamination, thereby increasing sensor life
• Prevents premature failure of the catalytic converter
• Snug fitting OE-style silicone boots ensure proper fit, function, and appearance
• Rigorously tested for perfect performance while saving money in fuel costs

Part Number	Brand	Price
BS15717	Bosch	$40.57

• 4-wire
• 18.9 in. wire length
• 0-1 V
• Heated
• Thread-in mounting style
• Includes wiring harness

• Constructed of premium ceramic technology that incorporates Zirconium or Titania and Yttrium for superior protection against mechanical and thermal shock
• Patented catalytically activated fine particle filter prevents contamination for extended life and ensures precise voltage to the engine's emission control computer, while a second filter doubles protection against exhaust gas contamination, thereby increasing sensor life
• Prevents premature failure of the catalytic converter
• Snug fitting OE-style silicone boots ensure proper fit, function, and appearance
• Rigorously tested for perfect performance while saving money in fuel costs

Part Number	Brand	Price
BS15718	Bosch	$45.45

• OE-Equivalent.
• Direct fit for easy installation.
• OE Style connectors and wire lengths.
• Base ceramic probe of Zirconium and Yttrium.
• Patented Platinum Power Grid.
• Fine particle filter.

Part Number	Brand	Price
W0133-1617862	Bosch	$37.95

• OE-Equivalent.
• Direct fit for easy installation.
• OE Style connectors and wire lengths.
• Base ceramic probe of Zirconium and Yttrium.
• Patented Platinum Power Grid.
• Fine particle filter.

Part Number	Brand	Price
W0133-1617602	Bosch	$37.95

• 4-wire
• 15.4 in. wire length
• Heated
• Planar design

• Constructed of premium ceramic technology that incorporates Zirconium or Titania and Yttrium for superior protection against mechanical and thermal shock
• Patented catalytically activated fine particle filter prevents contamination for extended life and ensures precise voltage to the engine's emission control computer, while a second filter doubles protection against exhaust gas contamination, thereby increasing sensor life
• Prevents premature failure of the catalytic converter
• Snug fitting OE-style silicone boots ensure proper fit, function, and appearance
• Rigorously tested for perfect performance while saving money in fuel costs

Part Number	Brand	Price
BS13117	Bosch	$35.26

• 4-wire
• 25.6 in. wire length
• 0-1 V
• Heated
• Thread-in mounting style
• Includes wiring harness

• Manufactured with a two-foot length sensor wire
• Uses a submersible patented connection system that protects against contamination and withstands the effects of extreme temperatures and engine vibration
• Posi-lock connectors that can be unscrewed and reconnected in case of a wiring mistake

Part Number	Brand	Price
BS15729	Bosch	$42.78

• 4-wire
• 11 in. wire length
• Heated
• Planar design

• Constructed of premium ceramic technology that incorporates Zirconium or Titania and Yttrium for superior protection against mechanical and thermal shock
• Patented catalytically activated fine particle filter prevents contamination for extended life and ensures precise voltage to the engine's emission control computer, while a second filter doubles protection against exhaust gas contamination, thereby increasing sensor life
• Prevents premature failure of the catalytic converter
• Snug fitting OE-style silicone boots ensure proper fit, function, and appearance
• Rigorously tested for perfect performance while saving money in fuel costs

Part Number	Brand	Price
BS15664	Bosch	$59.28

• OE-Equivalent.
• Direct fit for easy installation.
• OE Style connectors and wire lengths.
• Base ceramic probe of Zirconium and Yttrium.
• Patented Platinum Power Grid.
• Fine particle filter.

Part Number	Brand	Price
W0133-1615309	Bosch	$42.95

• OE-Equivalent.
• Direct fit for easy installation.
• OE Style connectors and wire lengths.
• Base ceramic probe of Zirconium and Yttrium.
• Patented Platinum Power Grid.
• Fine particle filter.

Part Number	Brand	Price
W0133-1615362	Bosch	$50.95

• Constructed of premium ceramic technology that incorporates Zirconium or Titania and Yttrium for superior protection against mechanical and thermal shock
• Patented catalytically activated fine particle filter prevents contamination for extended life and ensures precise voltage to the engine's emission control computer, while a second filter doubles protection against exhaust gas contamination, thereby increasing sensor life
• Prevents premature failure of the catalytic converter
• Snug fitting OE-style silicone boots ensure proper fit, function, and appearance
• Rigorously tested for perfect performance while saving money in fuel costs

Part Number	Brand	Price
BS13124	Bosch	$47.34

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Mounting hardware included
• Black tube finish
• Plastic tube material

• Provides power up to 11.21 h.p. at 4600 rpm
• Up to 99% filtration efficiency
• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

• Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states

Part Number	Brand	Price
K33632575	K&N	$298.57

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Mounting hardware included
• Black tube finish
• Plastic tube material

• Provides power up to 13.12 h.p. at 4562 rpm
• Up to 99% filtration efficiency
• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

• Product legal for sale in California under Executive Order (EO) number D-269-28. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Part Number	Brand	Price
K33572541	K&N	$273.27

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Black tube finish
• Plastic tube material

• Provides power up to 15.48 h.p. at 5049 rpm
• Up to 99% filtration efficiency
• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

• Product legal for sale in California under Executive Order (EO) number D-269-28. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Part Number	Brand	Price
K33572551	K&N	$281.69

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Black tube finish
• Plastic tube material

• Provides power up to 15.05 h.p. at 4649 rpm
• Up to 99% filtration efficiency
• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

• Product legal for sale in California under Executive Order (EO) number D-269-28. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Part Number	Brand	Price
K33572558	K&N	$274.90

• Cotton gauze filter material
• Oiled filter element
• Without heat shield
• Black tube finish
• Plastic tube material

• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

• Product legal for sale in California under Executive Order (EO) number D-269-20. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Part Number	Brand	Price
K335725144	K&N	$244.80

• Cotton gauze filter material
• Oiled filter element
• With heat shield
• Mounting hardware included
• Polished tube finish
• T-6063 aluminum tube material

• Provides power up to 9.38 h.p. at 4093 rpm
• Up to 99% filtration efficiency
• Mandrel-bent tubing
• Washable and reusable air filter
• Can go up to 100,000 miles between cleanings depending on driving conditions

• Product legal for sale in California under Executive Order (EO) number D-269-29. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.

Part Number	Brand	Price
K33772514KP	K&N	$288.29

• Cat-back exhaust system
• Exit behind the rear tire at an aggressive angle
• 3 in. main piping diameter
• 2.5 in. tail pipe diameter
• Single inlet and dual outlet muffler configuration
• One muffler
• Pipes, mounting hardware included
• Dual 3.5 in. polished stainless steel with round shape, slash cut, and non-rolled edge design

• 15 to 20 h.p.
• 409L stainless steel tubing
• Mandrel-bent tubing

• 50-state legal
• Clamp-on attachment style

Part Number	Brand	Price
G2769522	Gibson	$475.34

• Cat-back exhaust system
• Exit behind the rear tire
• 3 in. main piping diameter
• 3 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• One muffler
• Pipes, mounting hardware included
• Single 3.5 in. polished stainless steel with round shape, slash cut, and non-rolled edge design

• Mandrel-bent tubing

• 50-state legal
• Heavy duty enough for off-road use
• Clamp-on attachment style

Part Number	Brand	Price
G27319902	Gibson	$306.51

• Cat-back exhaust system
• Exit behind the rear tire
• 3 in. main piping diameter
• 3 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• One muffler
• Pipes, mounting hardware included
• Single 3.5 in. polished stainless steel with round shape, slash cut, and non-rolled edge design

• 409L stainless steel tubing
• Mandrel-bent tubing

• 50-state legal
• Heavy duty enough for off-road use
• Bolt-on attachment style

Part Number	Brand	Price
G27619902	Gibson	$449.87

• Cat-back exhaust system
• Exit behind the rear tire
• 3 in. main piping diameter
• 3 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• One muffler
• Pipes, mounting hardware included
• Single 3.5 in. polished stainless steel with round shape, slash cut, and non-rolled edge design

• 409L stainless steel tubing
• Mandrel-bent tubing

• 50-state legal
• Heavy duty enough for off-road use
• Bolt-on attachment style

Part Number	Brand	Price
G27619999	Gibson	$451.82

• Cat-back exhaust system
• Exit behind the rear tire
• 3 in. main piping diameter
• 3 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• One muffler
• Pipes, mounting hardware included
• Single 3.5 in. polished stainless steel with round shape, slash cut, and non-rolled edge design

• 409L stainless steel tubing
• Mandrel-bent tubing

• 50-state legal
• Heavy duty enough for off-road use
• Bolt-on attachment style

Part Number	Brand	Price
G27619991	Gibson	$449.87

• Cat-back exhaust system
• Exit behind the rear tire
• 3 in. main piping diameter
• 2.25 in. tail pipe diameter
• Single inlet and dual outlet muffler configuration
• One muffler
• Pipes, mounting hardware included
• Dual 3 in. polished stainless steel with round shape, slash cut, and non-rolled edge design

• 10 to 15 h.p.
• 409L stainless steel tubing
• Mandrel-bent tubing

• 50-state legal
• Clamp-on attachment style

Part Number	Brand	Price
G2769600	Gibson	$515.84

• Cat-back exhaust system
• Exit behind the rear tire
• 3 in. main piping diameter
• 2.25 in. tail pipe diameter
• Single inlet and dual outlet muffler configuration
• One muffler
• Pipes, mounting hardware included
• Dual 3 in. polished stainless steel with round shape, slash cut, and non-rolled edge design

• 10 to 15 h.p.
• Mandrel-bent tubing

• 50-state legal
• Clamp-on attachment style

Part Number	Brand	Price
G279600	Gibson	$365.45

• Cat-back exhaust system
• Exit behind the rear tire
• 3 in. main piping diameter
• 3 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• One muffler
• Single 3.5 in. polished stainless steel with round shape, angle cut, and non-rolled edge design

• 15-20 h.p.
• Mandrel-bent tubing

• 50-state legal
• Heavy duty enough for off-road use
• Bolt-on attachment style

Part Number	Brand	Price
G27319991	Gibson	$308.22

• Cat-back exhaust system
• Exit behind the rear tire at an aggressive angle
• 3 in. main piping diameter
• 2.5 in. tail pipe diameter
• Single inlet and dual outlet muffler configuration
• One muffler
• Dual 3.5 in. polished stainless steel with round shape, angle cut, and non-rolled edge design

• 15-20 h.p.
• Mandrel-bent tubing

• 50-state legal
• Bolt-on attachment style

Part Number	Brand	Price
G279522	Gibson	$410.14

• Cat-back exhaust system
• Exit behind the rear tire
• 3 in. main piping diameter
• 3 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• One muffler
• Pipes, mounting hardware included
• Single 3.5 in. polished stainless steel with round shape, slash cut, and non-rolled edge design

• 409L stainless steel tubing
• Mandrel-bent tubing

• 50-state legal
• Heavy duty enough for off-road use
• Bolt-on attachment style

Part Number	Brand	Price
G27619900	Gibson	$424.54

• Cat-back exhaust system
• Exit behind the rear tire
• 3 in. main piping diameter
• 2.25 in. tail pipe diameter
• Single inlet and dual outlet muffler configuration
• One muffler
• Pipes, mounting hardware included
• Dual 3 in. polished stainless steel with round shape, slash cut, and non-rolled edge design

• 10 to 15 h.p.
• 409L stainless steel tubing
• Mandrel-bent tubing

• 50-state legal
• Clamp-on attachment style

Part Number	Brand	Price
G2769400	Gibson	$516.04

• Cat-back exhaust system
• Exit behind the rear tire
• 3 in. main piping diameter
• 3 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• One muffler
• Pipes, mounting hardware included
• Single 3.5 in. polished stainless steel with round shape, slash cut, and non-rolled edge design

• Mandrel-bent tubing

• 50-state legal
• Heavy duty enough for off-road use
• Bolt-on attachment style

Part Number	Brand	Price
G27319900	Gibson	$308.95

• Cat-back exhaust system
• Exit behind the rear tire
• 3 in. main piping diameter
• 2.25 in. tail pipe diameter
• Single inlet and dual outlet muffler configuration
• One muffler
• Pipes, mounting hardware included
• Dual 3 in. polished stainless steel with round shape, slash cut, and non-rolled edge design

• 10 to 15 h.p.
• Mandrel-bent tubing

• 50-state legal
• Clamp-on attachment style

Part Number	Brand	Price
G279400	Gibson	$372.69

• Cat-back exhaust system
• Single rear exit
• 3 in. main piping diameter
• Single inlet and outlet muffler configuration
• One muffler
• Single 3.5 in. polished stainless steel tip with oval shape, angle cut, and non-rolled edge design

• 10% increase in horsepower
• Mandrel-bent tubing

• 50-state legal
• Weld-on attachment style

Part Number	Brand	Price
M6616765	Magnaflow	$624.75

• Mandrel-bent tubing

• 50-state legal

Part Number	Brand	Price
M6615872	Magnaflow	$616.77

• Mandrel-bent tubing

• 50-state legal

Part Number	Brand	Price
M6615681	Magnaflow	$569.14

• Cat-back exhaust system
• Single rear side exit
• 3 in. main piping diameter
• 3 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• One muffler
• Single 4 in. polished stainless steel tip with round shape, straight cut, and rolled edge design

• 10% increase in horsepower
• Mandrel-bent tubing

• 50-state legal
• Weld-on attachment style

Part Number	Brand	Price
M6615608	Magnaflow	$569.14

• Cat-back exhaust system
• Single side exit
• 2.5 in. main piping diameter
• 3 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• One muffler
• Pipes, mounting hardware included
• Single 3.5 in. polished stainless steel tip with round shape, straight cut, and rolled edge design

• 16-gauge aluminized steel tubing
• Mandrel-bent tubing

• 50-state legal
• Weld-on attachment style

Part Number	Brand	Price
F1317385	Flowmaster	$346.88

• Cat-back exhaust system
• Single side exit
• 2.5 in. main piping diameter
• 3 in. tail pipe diameter
• Single inlet and outlet muffler configuration
• One muffler
• Pipes, mounting hardware included
• Single 3.5 in. polished stainless steel tip with round shape, straight cut, and rolled edge design

• 16-gauge aluminized steel tubing
• Mandrel-bent tubing

• 50-state legal
• Weld-on attachment style

Part Number	Brand	Price
F1317385	Flowmaster	$346.88

• 14 mm thread size
• 17.55 mm reach
• 16 mm hex size
• Platinum plug
• Tapered seat style
• Interference suppression resistor
• Surface air gap plug
• Heat fused platinum center electrode
• 2 ground electrodes
• Heat range 9

• Fine wire platinum center electrode which is heat fused into the extended ceramic insulator reduces the voltage necessary to jump the gap as well as reduces quenching
• Reaches self cleaning temperature faster for quicker starts and increased fuel efficiency

Part Number	Brand	Price
BS4304	Bosch	$8.71

• 14 mm thread size
• 17.55 mm reach
• 16 mm hex size
• Platinum plug
• Tapered seat style
• Interference suppression resistor
• Surface air gap plug
• Heat fused platinum center electrode
• 2 ground electrodes
• Heat range 9

• Fine wire platinum center electrode which is heat fused into the extended ceramic insulator reduces the voltage necessary to jump the gap as well as reduces quenching
• Reaches self cleaning temperature faster for quicker starts and increased fuel efficiency

Part Number	Brand	Price
BS4304	Bosch	$8.71

• 14 mm thread size
• 17.55 mm reach
• 16 mm hex size
• Platinum plug
• Tapered seat style
• Interference suppression resistor
• Surface air gap plug
• Heat fused platinum center electrode
• 4 ground electrodes
• Heat range 9

• Reduces the voltage necessary to jump the gap as well as quenching
• Provides multiple radial spark paths and surface air gap design that creates optimal exposure of the air/fuel mixture to the enhanced ignition spark
• Yttrium-enhancement of the ground electrodes further extend plug life
• Designed to reach self cleaning temperature faster for quicker starts, smoother acceleration, and increased fuel efficiency

Part Number	Brand	Price
BS4459	Bosch	$17.32