|
|
1983 Plymouth Scamp Moog Tie Rod End
MOOG TIE ROD END, INNER, SOLD INDIVIDUALLY -- A High Quality Direct Fit OEM Replacement Tie Rod End, Designed To Consistently Produce Just The Right Amount Of Preload To Provide Proper Steering Effort, Housing Is Forged Then Heat-Treated For Strength And Durability, Sealed With A Premium Polychloroprene To Keep Out Dirt, Its Bearings Include Grease Grooves That Ensure Flow Of Lubrication Throughout The Part
| Part Number |
Brand |
Price |
 |
| MOEV116 |
Moog |
$32.63 |
|
|
|
|
|
1983 Plymouth Scamp Moog Tie Rod End
MOOG TIE ROD END, OUTER, SOLD INDIVIDUALLY -- A High Quality Direct Fit OEM Replacement Tie Rod End, Designed To Consistently Produce Just The Right Amount Of Preload To Provide Proper Steering Effort, Housing Is Forged Then Heat-Treated For Strength And Durability, Sealed With A Premium Polychloroprene To Keep Out Dirt, Its Bearings Include Grease Grooves That Ensure Flow Of Lubrication Throughout The Part
| Part Number |
Brand |
Price |
|
| MOES3008RL |
Moog |
$25.61 |
|
|
|
|
1983 Plymouth Scamp Mevotech Tie Rod End
MEVOTECH TIE ROD END, SOLD INDIVIDUALLY -- Non-adjustable; Non-greasable; This is a high quality, OE replacement tie rod end.
| Part Number |
Brand |
Price |
|
| MERES3008RL |
Mevotech |
$7.14 |
|
|
|
|
1983 Plymouth Scamp Mevotech Tie Rod End
MEVOTECH TIE ROD END, SOLD INDIVIDUALLY -- A high quality, direct-fit OE replacement tie rod end.
| Part Number |
Brand |
Price |
|
| MEMEV126 |
Mevotech |
$17.22 |
|
|
|
|
1983 Plymouth Scamp Mevotech Tie Rod End
MEVOTECH TIE ROD END, SOLD INDIVIDUALLY -- This is a high quality, OE replacement tie rod end.
| Part Number |
Brand |
Price |
|
| MEMES3008RL |
Mevotech |
$9.90 |
|
|
|
|
1983 Plymouth Scamp AC Delco Tie Rod End
AC DELCO TIE ROD END, SOLD INDIVIDUALLY -- This is a high quality OE replacement tie rod end.
| Part Number |
Brand |
Price |
|
| AC45A0448 |
AC Delco |
$43.77 |
|
|
|
|
1971-1976 Plymouth Scamp AC Delco Tie Rod End
AC DELCO TIE ROD END, SOLD INDIVIDUALLY -- 0.56 in. rod diameter; Greasable; Features precision-machined housing and low-friction polymer upper bearing material that helps eliminate endplay and helps provide better return-to-center as well as smoother and easier steering; With heat-treated ball ends that are precision-finished for consistent torque and smooth operation throughout the entire range of travel; Zinc dichromate coated for increased corrosion protection; Case-hardened, full-ball type stud for tighter over-all fit.
| Part Number |
Brand |
Price |
|
| AC45A0080 |
AC Delco |
$18.54 |
|
|
|
|
1971-1976 Plymouth Scamp AC Delco Tie Rod End
AC DELCO TIE ROD END, SOLD INDIVIDUALLY -- 0.56 in. rod diameter; Greasable; Features precision-machined housing and low-friction polymer upper bearing material that helps eliminate endplay and helps provide better return-to-center as well as smoother and easier steering; With heat-treated ball ends that are precision-finished for consistent torque and smooth operation throughout the entire range of travel; Zinc dichromate coated for increased corrosion protection; Case-hardened, full-ball type stud for tighter over-all fit.
| Part Number |
Brand |
Price |
|
| AC45A0081 |
AC Delco |
$19.00 |
|
|
|
|
|
1971-1976 Plymouth Scamp Energy Susp Tie Rod End Boot
ENERGY SUSPENSION TIE ROD DUST BOOTS, ROUND STYLE, BLACK, SET OF 2 -- Allows for the replacement of damaged tie rod end boots instead of having to replace the entire tie rod; Fits tie rod end ball joints with at least 15 mm largest ball stud shaft diameter and 35 mm top-of-socket diameter; Made of Hyper-Flex performance polyurethane for higher firmness and exceptional resistance to oil, coolant and road contaminants; Features a 5-pont sealing action design that prevents contamination as well as loss of lubrication.
| Part Number |
Brand |
Price |
|
| E12913101G |
Energy Susp |
$4.25 |
|
|
|
|
|
1971-1976 Plymouth Scamp Energy Susp Tie Rod End Boot
ENERGY SUSPENSION TIE ROD DUST BOOTS, ROUND STYLE, RED, SET OF 2 -- Allows for the replacement of damaged tie rod end boots instead of having to replace the entire tie rod; Fits tie rod end ball joints with at least 15 mm largest ball stud shaft diameter and 35 mm top-of-socket diameter; Made of Hyper-Flex performance polyurethane for higher firmness and exceptional resistance to oil, coolant and road contaminants; Features a 5-pont sealing action design that prevents contamination as well as loss of lubrication.
| Part Number |
Brand |
Price |
|
| E12913101R |
Energy Susp |
$4.74 |
|
|
|
|
|
1971-1976 Plymouth Scamp Energy Susp Tie Rod End Boot
ENERGY SUSPENSION OCTAGON STYLE TIE ROD END BOOTS, RED, SET OF 2 -- Largest diameter taper 0.59 in./15 mm; Socket top diameter 1.38 in./35 mm; Made of Hyper-Flex polyurethane to resist oil, road salt, and other corrosives; Easy to install.
| Part Number |
Brand |
Price |
|
| E12913102R |
Energy Susp |
$3.05 |
|
|
|
|
|
1971-1976 Plymouth Scamp Energy Susp Tie Rod End Boot
ENERGY SUSPENSION TIE ROD DUST BOOTS, OCTAGON STYLE, BLACK, SET OF 2 -- Allows for the replacement of damaged tie rod end boots instead of having to replace the entire tie rod; Fits tie rod end ball joints with at least 15 mm largest ball stud shaft diameter and 35 mm top-of-socket diameter; Made of Hyper-Flex performance polyurethane for higher firmness and exceptional resistance to oil, coolant and road contaminants; Features a 5-pont sealing action design that prevents contamination as well as loss of lubrication.
| Part Number |
Brand |
Price |
|
| E12913102G |
Energy Susp |
$2.99 |
|
|
|
|
1971-1976 Plymouth Scamp AC Delco Tie Rod Adjusting Sleeve
AC DELCO TIE ROD END ADJUSTING SLEEVE, SOLD INDIVIDUALLY -- This high quality tie rod end adjusting sleeve directly replaces OE number 88910746.
| Part Number |
Brand |
Price |
|
| AC45A6000 |
AC Delco |
$17.52 |
|
|
|
|
|
1983 Plymouth Scamp FPD Tie Rod End
FPD TIE ROD END, SOLD INDIVIDUALLY -- This is a high quality, OE replacement tie rod end.
| Part Number |
Brand |
Price |
|
| FPDCV158116 |
FPD |
$8.60 |
|
|
|
|
|
1971-1976 Plymouth Scamp Ingalls Engineering Tie Rod Adjusting Sleeve
INGALLS ENGINEERING ADJUSTING SLEEVE, SOLD INDIVIDUALLY -- This is a high quality, OE replacement adjusting sleeve.
| Part Number |
Brand |
Price |
|
| INEIES319S |
Ingalls Engineering |
$8.90 |
|
|
|
|
|
1983 Plymouth Scamp Ingalls Engineering Tie Rod End
INGALLS ENGINEERING RACK AND PINION TIE ROD END, SOLD INDIVIDUALLY -- This is a high quality, OE replacement rack and pinion tie rod end.
| Part Number |
Brand |
Price |
|
| INEIEV116 |
Ingalls Engineering |
$14.56 |
|
|
|
|
|
1983 Plymouth Scamp Ingalls Engineering Tie Rod End
INGALLS ENGINEERING TIE ROD END, SOLD INDIVIDUALLY -- This is a high quality, OE replacement tie rod end.
| Part Number |
Brand |
Price |
|
| INEIES3008RL |
Ingalls Engineering |
$13.43 |
|
|
|
|
|
1971-1976 Plymouth Scamp Ingalls Engineering Tie Rod End
INGALLS ENGINEERING TIE ROD END, SOLD INDIVIDUALLY -- This is a high quality, OE replacement tie rod end.
| Part Number |
Brand |
Price |
|
| INEIES401R |
Ingalls Engineering |
$8.08 |
|
|
|
|
|
1971-1976 Plymouth Scamp Ingalls Engineering Tie Rod End
INGALLS ENGINEERING TIE ROD END, SOLD INDIVIDUALLY -- This is a high quality, OE replacement tie rod end.
| Part Number |
Brand |
Price |
|
| INEIES401L |
Ingalls Engineering |
$8.08 |
|
|
