|
|
1971 Oldsmobile 442 Moog Tie Rod End
MOOG TIE ROD END, INNER, SOLD INDIVIDUALLY -- A High Quality Direct Fit OEM Replacement Tie Rod End, Designed To Consistently Produce Just The Right Amount Of Preload To Provide Proper Steering Effort, Housing Is Forged Then Heat-Treated For Strength And Durability, Sealed With A Premium Polychloroprene To Keep Out Dirt, Its Bearings Include Grease Grooves That Ensure Flow Of Lubrication Throughout The Part
| Part Number |
Brand |
Price |
 |
| MOES406L |
Moog |
$62.82 |
|
|
|
|
|
1971 Oldsmobile 442 Moog Tie Rod End
MOOG TIE ROD END, OUTER, SOLD INDIVIDUALLY -- A High Quality Direct Fit OEM Replacement Tie Rod End, Designed To Consistently Produce Just The Right Amount Of Preload To Provide Proper Steering Effort, Housing Is Forged Then Heat-Treated For Strength And Durability, Sealed With A Premium Polychloroprene To Keep Out Dirt, Its Bearings Include Grease Grooves That Ensure Flow Of Lubrication Throughout The Part
| Part Number |
Brand |
Price |
|
| MOES406R |
Moog |
$62.82 |
|
|
|
|
|
1968-1970 Oldsmobile 442 Moog Tie Rod End
MOOG TIE ROD END, SOLD INDIVIDUALLY -- Includes dust boot, castle nut, cotter pin, and grease fitting; This high quality tie rod end is designed to consistently produce the right amount of preload to provide proper steering effort; Features a patented cover-plate design to eliminate axial clearance, a forged and heat-treated housing for strength and durability, and a premium polychloroprene seal to keep out dirt; The bearings include grease grooves that ensure flow of lubrication throughout the tie rod end.
| Part Number |
Brand |
Price |
|
| MOES333RL |
Moog |
$35.99 |
|
|
|
|
|
1968-1970 Oldsmobile 442 Moog Tie Rod End
MOOG TIE ROD END, SOLD INDIVIDUALLY -- This high quality tie rod end is designed to consistently produce the right amount of preload to provide proper steering effort; Features a patented cover-plate design to eliminate axial clearance, a forged and heat-treated housing for strength and durability, and a premium polychloroprene seal to keep out dirt; The bearings include grease grooves that ensure flow of lubrication throughout the tie rod end.
| Part Number |
Brand |
Price |
|
| MOES681N |
Moog |
$19.56 |
|
|
|
|
1967-1970 Oldsmobile 442 AC Delco Tie Rod End
AC DELCO TIE ROD END, SOLD INDIVIDUALLY -- 2 required per vehicle; Features an advanced-technology and performance-tested low-friction polymer upper bearing material that helps eliminate endplay and helps provide smoother, easier steering, better return-to-center; With heat-treated ball ends that are precision-finished and zinc dichromate coated for increased corrosion protection and smooth operation throughout the travel; Case-hardened, full-ball type stud for tighter over-all fit.
| Part Number |
Brand |
Price |
|
| AC45A0106 |
AC Delco |
$18.86 |
|
|
|
|
1967-1970 Oldsmobile 442 AC Delco Tie Rod End
AC DELCO TIE ROD END, SOLD INDIVIDUALLY -- 2 required per vehicle; Features an advanced-technology and performance-tested low-friction polymer upper bearing material that helps eliminate endplay and helps provide smoother, easier steering, better return-to-center; With heat-treated ball ends that are precision-finished and zinc dichromate coated for increased corrosion protection and smooth operation throughout the travel; Case-hardened, full-ball type stud for tighter over-all fit.
| Part Number |
Brand |
Price |
|
| AC45A0037 |
AC Delco |
$33.16 |
|
|
|
|
1968-1971 Oldsmobile 442 Replacement Tie Rod Adjusting Sleeve
TIE ROD ADJUSTING SLEEVE, SOLD INDIVIDUALLY -- A high quality, OE replacement tie rod adjusting sleeve; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| REPA282102 |
Replacement |
$9.71 |
|
|
|
|
|
1965-1971 Oldsmobile 442 Energy Susp Tie Rod End Boot
ENERGY SUSPENSION TIE ROD DUST BOOTS, ROUND STYLE, BLACK, SET OF 2 -- Allows for the replacement of damaged tie rod end boots instead of having to replace the entire tie rod; Fits tie rod end ball joints with at least 15 mm largest ball stud shaft diameter and 35 mm top-of-socket diameter; Made of Hyper-Flex performance polyurethane for higher firmness and exceptional resistance to oil, coolant and road contaminants; Features a 5-pont sealing action design that prevents contamination as well as loss of lubrication.
| Part Number |
Brand |
Price |
|
| E12913101G |
Energy Susp |
$4.25 |
|
|
|
|
|
1965-1971 Oldsmobile 442 Energy Susp Tie Rod End Boot
ENERGY SUSPENSION TIE ROD DUST BOOTS, ROUND STYLE, RED, SET OF 2 -- Allows for the replacement of damaged tie rod end boots instead of having to replace the entire tie rod; Fits tie rod end ball joints with at least 15 mm largest ball stud shaft diameter and 35 mm top-of-socket diameter; Made of Hyper-Flex performance polyurethane for higher firmness and exceptional resistance to oil, coolant and road contaminants; Features a 5-pont sealing action design that prevents contamination as well as loss of lubrication.
| Part Number |
Brand |
Price |
|
| E12913101R |
Energy Susp |
$4.74 |
|
|
|
|
|
1965-1971 Oldsmobile 442 Energy Susp Tie Rod End Boot
ENERGY SUSPENSION TIE ROD DUST BOOTS, OCTAGON STYLE, BLACK, SET OF 2 -- Allows for the replacement of damaged tie rod end boots instead of having to replace the entire tie rod; Fits tie rod end ball joints with at least 15 mm largest ball stud shaft diameter and 35 mm top-of-socket diameter; Made of Hyper-Flex performance polyurethane for higher firmness and exceptional resistance to oil, coolant and road contaminants; Features a 5-pont sealing action design that prevents contamination as well as loss of lubrication.
| Part Number |
Brand |
Price |
|
| E12913102G |
Energy Susp |
$2.99 |
|
|
|
|
|
1965-1971 Oldsmobile 442 Energy Susp Tie Rod End Boot
ENERGY SUSPENSION OCTAGON STYLE TIE ROD END BOOTS, RED, SET OF 2 -- Largest diameter taper 0.59 in./15 mm; Socket top diameter 1.38 in./35 mm; Made of Hyper-Flex polyurethane to resist oil, road salt, and other corrosives; Easy to install.
| Part Number |
Brand |
Price |
|
| E12913102R |
Energy Susp |
$3.05 |
|
|
|
|
|
1968-1971 Oldsmobile 442 Moog Tie Rod Adjusting Sleeve
MOOG TIE ROD ADJUSTING SLEEVE, SOLD INDIVIDUALLY -- Features a corrosion-resistant coating and flutes at each end of the stud to make installation easy and help channel out corrosive buildup.
| Part Number |
Brand |
Price |
|
| MOES2032S |
Moog |
$12.14 |
|
|
|
|
|
1970 Oldsmobile 442 B&M Transmission Kick Down
B&M UNIVERSAL GM TH350 TV/KICKDOWN CABLE, BLACK -- Plastic cable jacket material; Expected to work on 95 percent of all listed transmission applications yet less expensive than OE models; Used as straight replacement cable or ease the installation of transmission swaps; With million mile B&M warranty.
| Part Number |
Brand |
Price |
|
| B3230287 |
B&M |
$36.22 |
|
|
|
|
|
1968-1970 Oldsmobile 442 B&M Transmission Kick Down
B&M GM TH-400 KICK DOWN SWITCH -- Makes installation of the transmission kickdown feature a snap; Mounts to either a TH-700 or TH-350 throttle cable bracket; With 1-year B&M limited warranty.
| Part Number |
Brand |
Price |
|
| B3220297 |
B&M |
$48.28 |
|
|
|
|
1971 Oldsmobile 442 AC Delco Tie Rod Adjusting Sleeve
AC DELCO TIE ROD ADJUSTING SLEEVE -- Replaces OE part number 88910750; This is a high quality OE replacement tie rod adjusting sleeve; 2 required per vehicle.
| Part Number |
Brand |
Price |
|
| AC45A6004 |
AC Delco |
$11.39 |
|
|
|
|
1967-1970 Oldsmobile 442 AC Delco Tie Rod Adjusting Sleeve
AC DELCO TIE ROD ADJUSTING SLEEVE -- This is a high quality, direct fit OE replacement tie rod adjusting sleeve; 2 required per vehicle.
| Part Number |
Brand |
Price |
|
| AC45A6013 |
AC Delco |
$10.75 |
|
|
|
|
|
1968-1970 Oldsmobile 442 FPD Tie Rod End
FPD TIE ROD END, SOLD INDIVIDUALLY -- Adjustable; Greasable; This is a high quality, OE replacement tie rod end.
| Part Number |
Brand |
Price |
|
| FPDDM154681N |
FPD |
$12.72 |
|
|
|
|
|
1971 Oldsmobile 442 Ingalls Engineering Tie Rod Adjusting Sleeve
INGALLS ENGINEERING ADJUSTING SLEEVE, SOLD INDIVIDUALLY -- This is a high quality, OE replacement adjusting sleeve.
| Part Number |
Brand |
Price |
|
| INEIES2004S |
Ingalls Engineering |
$5.72 |
|
|
|
|
|
1965-1970 Oldsmobile 442 Ingalls Engineering Tie Rod Adjusting Sleeve
INGALLS ENGINEERING ADJUSTING SLEEVE, SOLD INDIVIDUALLY -- This is a high quality, OE replacement adjusting sleeve.
| Part Number |
Brand |
Price |
|
| INEIES2032S |
Ingalls Engineering |
$5.50 |
|
|
|
|
|
1971 Oldsmobile 442 Ingalls Engineering Tie Rod End
INGALLS ENGINEERING TIE ROD END, SOLD INDIVIDUALLY -- This is a high quality, OE replacement tie rod end.
| Part Number |
Brand |
Price |
|
| INEIES406L |
Ingalls Engineering |
$23.58 |
|
|
|
|
|
1971 Oldsmobile 442 Ingalls Engineering Tie Rod End
INGALLS ENGINEERING TIE ROD END, SOLD INDIVIDUALLY -- This is a high quality, OE replacement tie rod end.
| Part Number |
Brand |
Price |
|
| INEIES406R |
Ingalls Engineering |
$23.58 |
|
|
|
|
|
1965-1970 Oldsmobile 442 Ingalls Engineering Tie Rod End
INGALLS ENGINEERING TIE ROD END, SOLD INDIVIDUALLY -- This is a high quality, OE replacement tie rod end.
| Part Number |
Brand |
Price |
|
| INEIES333RL |
Ingalls Engineering |
$20.81 |
|
|
|
|
|
1965-1970 Oldsmobile 442 Hotchkis Tie Rod Adjusting Sleeve
HOTCHKIS TIE ROD SLEEVES, POWDERCOATED BLACK, SET OF 2 -- 0.625 in. thread; Includes jam nuts; Machined hex body design; Enhance your vehicle's steering precision with these tie rod adjusting sleeves; See fit note below for more information on how you can enhance your suspension with other Hotchkis products; With Hotchkis' limited 3-year warranty.
| Part Number |
Brand |
Price |
|
| HOT1601 |
Hotchkis |
$65.05 |
|
|
