|
|
1987-1988 Oldsmobile Firenza Dayco Accessory Belt Tensioner
DAYCO BELT TENSIONER -- Automatic Belt Tensioner, The Featured Patented Flat Spring Design Reduces The Risk Of Accessory Bearing Failure, Reduces The Risk Of Belt Squeal And Slippage, Or Poor Accessory Performance Caused By Low Tension, The Flat Spring Is Coated To Resist Rust, Heavy Duty Cast Aluminum Spring Case Resists Cracking, Heavy-Duty Cast Aluminum Arm Offers Additional Strength And Less Distortion
| Part Number |
Brand |
Price |
 |
| DY89226 |
Dayco |
$87.03 |
|
|
|
|
|
1987 Oldsmobile Firenza Dayco Accessory Belt Tensioner
DAYCO NO SLACK AUTOMATIC BELT TENSIONER -- Designed to maintain constant tension on serpentine belt drives; Features a patented flat spring design that provides less operating range variations in tension, reduces the risk of premature accessory bearing failure, and lessens the risk of belt squeal and slippage or poor accessory performance; Designed with a Teflon strip wound within the spring to resist abrasion; A heavy-duty cast aluminum arm offers additional strength and less distortion, an aluminum retainer ring locks the spring case and arm together and seals against corrosion, a thermoplastic rubber spring slot plug keeps out harmful contaminants, and a rubber O-ring seals against dust and grime; The lubricated nylon pivot tube bushing and spring bushing promote quieter performance, while the zinc coated mounting bolt resists rust and is concentric for a more even degree of constant tension.
| Part Number |
Brand |
Price |
|
| DY89203 |
Dayco |
$51.24 |
|
|
|
|
|
1987-1988 Oldsmobile Firenza Dayco Accessory Belt Tensioner
DAYCO BELT TENSIONER -- Automatic Belt Tensioner, The Featured Patented Flat Spring Design Reduces The Risk Of Accessory Bearing Failure, Reduces The Risk Of Belt Squeal And Slippage, Or Poor Accessory Performance Caused By Low Tension, The Flat Spring Is Coated To Resist Rust, Heavy Duty Cast Aluminum Spring Case Resists Cracking, Heavy-Duty Cast Aluminum Arm Offers Additional Strength And Less Distortion
| Part Number |
Brand |
Price |
|
| DY89341 |
Dayco |
$64.40 |
|
|
|
|
|
1987 Oldsmobile Firenza Dayco Accessory Belt Tension Pulley
DAYCO BELT TENSIONER PULLEY -- 76 mm diameter, 28.7 mm W, 17 mm bearing ID, 06 rib maximum belt W, 1-bearing, non-flat polymer with flange, serpentine pulley type; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance; With Dayco limited warranty.
| Part Number |
Brand |
Price |
|
| DY89009 |
Dayco |
$16.84 |
|
|
|
|
|
1987-1988 Oldsmobile Firenza Dayco Accessory Belt Tension Pulley
DAYCO BELT TENSIONER PULLEY -- 100 mm diameter, 28 mm W, 17 mm bearing ID, 06 rib maximum belt W, 1-bearing, flat steel without flange, serpentine pulley type; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance; With Dayco limited warranty.
| Part Number |
Brand |
Price |
|
| DY89026 |
Dayco |
$29.74 |
|
|
|
|
|
1985-1986 Oldsmobile Firenza Dayco Accessory Belt Tension Pulley
DAYCO BELT TENSIONER PULLEY -- 90 mm diameter, 31 mm W, 17 mm bearing ID, 06 rib maximum belt W, 1-bearing, flat polymer with flange, serpentine pulley type; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance; With Dayco limited warranty.
| Part Number |
Brand |
Price |
|
| DY89001 |
Dayco |
$24.59 |
|
|
|
|
|
1985-1986 Oldsmobile Firenza Dayco Accessory Belt Tension Pulley
DAYCO BELT TENSIONER PULLEY -- 81 mm diameter, 16.4 mm W, 17 mm bearing ID, 0.5 in. maximum belt W, 1 bearing, non-flat steel with flange, v-belt pulley type; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance; With Dayco limited warranty.
| Part Number |
Brand |
Price |
|
| DY89036 |
Dayco |
$24.92 |
|
|
|
|
1987 Oldsmobile Firenza Gates Accessory Belt Tensioner
Gates
Gates is one of the world's leading manufacturers of drive belt components and offers the most complete line of OE specified drive belt products to the automotive aftermarket.
| Part Number |
Brand |
Price |
|
| W0133-1864247 |
Gates |
$106.95 |
|
|
|
|
|
1987-1988 Oldsmobile Firenza Gates Accessory Belt Tensioner
GATES DRIVEALIGN AUTO TENSIONER -- 17 mm bearing bore inside diameter, 76 mm outside diameter, 22 mm width, 5-rib V-ribbed belt type; Steel material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; With lifetime Gates limited warranty.
| Part Number |
Brand |
Price |
|
| GAT38199 |
Gates |
$51.24 |
|
|
|
|
|
1987 Oldsmobile Firenza Gates Accessory Belt Tensioner
GATES DRIVEALIGN AUTO TENSIONER -- 17 mm bearing bore inside diameter, 90 mm outside diameter, 25.5 mm width, 6-rib V-ribbed belt type; Thermoplastic material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; With lifetime Gates limited warranty.
| Part Number |
Brand |
Price |
|
| GAT38105 |
Gates |
$44.21 |
|
|
|
|
|
1987 Oldsmobile Firenza Dayco Accessory Belt Idler Pulley
DAYCO NO SLACK IDLER PULLEY -- 90 mm OD, 17 mm ID, 30 mm W, flat steel without flange; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance.
| Part Number |
Brand |
Price |
|
| DY89006 |
Dayco |
$24.64 |
|
|
|
|
|
1987 Oldsmobile Firenza Gates Accessory Belt Idler Pulley
GATES DRIVEALIGN IDLER PULLEY -- 76 mm outside diameter, 25 mm width, 6-grooves, 6-rib V-ribbed belt type; Thermoplastic material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; Its robust and high quality pulley materials withstand contaminants, while its superior bearings outperform OE idler pulleys; Guaranteed to last up to 3 times longer than competitive aftermarket tensioners.
| Part Number |
Brand |
Price |
|
| GAT38009 |
Gates |
$15.54 |
|
|
|
|
|
1985-1986 Oldsmobile Firenza Gates Accessory Belt Idler Pulley
GATES DRIVEALIGN IDLER PULLEY -- 90 mm outside diameter, 30.5 mm width, 6-rib V-ribbed belt type; Steel material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; Its robust and high quality pulley materials withstand contaminants, while its superior bearings outperform OE idler pulleys; Guaranteed to last up to 3 times longer than competitive aftermarket tensioners.
| Part Number |
Brand |
Price |
|
| GAT38001 |
Gates |
$22.23 |
|
|
|
|
1987 Oldsmobile Firenza Gates Accessory Belt Idler Pulley
Gates
Gates is one of the world's leading manufacturers of drive belt components and offers the most complete line of OE specified drive belt products to the automotive aftermarket.
| Part Number |
Brand |
Price |
|
| W0133-1826638 |
Gates |
$35.95 |
|
|
|
|
1985-1986 Oldsmobile Firenza Gates Accessory Belt Idler Pulley
Gates
Gates is one of the world's leading manufacturers of drive belt components and offers the most complete line of OE specified drive belt products to the automotive aftermarket.
| Part Number |
Brand |
Price |
|
| W0133-1786610 |
Gates |
$43.95 |
|
|
|
|
|
1987-1988 Oldsmobile Firenza Gates Accessory Belt Idler Pulley
GATES DriveAlign IDLER PULLEY -- A High Quality Idler Pulley, Bearing Bore I.D. 17mm, O.D. 76mm, Made Of Premium Materials For Longer Wear Life And Higher Load Capacity, Designed To Operate Under Severe Conditions And Provide Greater Reliability, Built With Premium Bearings And Seals That Can Operate At Higher Temperatures
| Part Number |
Brand |
Price |
|
| GAT36141 |
Gates |
$24.69 |
|
|
|
|
|
1987 Oldsmobile Firenza Gates Accessory Belt Idler Pulley
GATES DriveAlign IDLER PULLEY -- A High Quality Idler Pulley, Bearing Bore I.D. 17mm, O.D. 90mm, Made Of Premium Materials For Longer Wear Life And Higher Load Capacity, Designed To Operate Under Severe Conditions And Provide Greater Reliability, Built With Premium Bearings And Seals That Can Operate At Higher Temperatures
| Part Number |
Brand |
Price |
|
| GAT38007 |
Gates |
$14.91 |
|
|
|
|
|
1985-1986 Oldsmobile Firenza Gates Accessory Belt Idler Pulley
GATES DriveAlign IDLER PULLEY -- A High Quality Idler Pulley, Bearing Bore I.D. 17mm, O.D. 81mm, Made Of Premium Materials For Longer Wear Life And Higher Load Capacity, Designed To Operate Under Severe Conditions And Provide Greater Reliability, Built With Premium Bearings And Seals That Can Operate At Higher Temperatures
| Part Number |
Brand |
Price |
|
| GAT38037 |
Gates |
$22.73 |
|
|
|
|
|
1983-1985 Oldsmobile Firenza Covercraft Storage Bag
COVERCRAFT UV BAG -- A strong and durable storage of UV SunShield interior window covers.
| Part Number |
Brand |
Price |
|
| C59ZUBAGV7 |
Covercraft |
$5.21 |
|
|
|
|
|
1983-1985 Oldsmobile Firenza Covercraft Storage Bag
COVERCRAFT UV BAG -- A strong and durable storage of UV SunShield interior window covers.
| Part Number |
Brand |
Price |
|
| C59ZUBAGV7 |
Covercraft |
$5.21 |
|
|
|
|
|
1983-1985 Oldsmobile Firenza Covercraft Storage Bag
COVERCRAFT UV BAG -- A strong and durable storage of UV SunShield interior window covers.
| Part Number |
Brand |
Price |
|
| C59ZUBAGV7 |
Covercraft |
$5.21 |
|
|
|
|
|
1982 Oldsmobile Firenza Covercraft Storage Bag
COVERCRAFT UV BAG -- A strong and durable storage of UV SunShield interior window covers.
| Part Number |
Brand |
Price |
|
| C59ZUBAGV7 |
Covercraft |
$5.21 |
|
|
|
|
1987-1988 Oldsmobile Firenza Dorman Accessory Belt Tensioner
DORMAN AUTOMATIC BELT TENSIONER -- Serpentine Type; A high quality, direct fit OE replacement automatic belt tensioner; With lifetime Dorman limited warranty.
| Part Number |
Brand |
Price |
|
| RB419106 |
Dorman |
$51.88 |
|
|
|
|
1987-1988 Oldsmobile Firenza AC Delco Accessory Belt Tensioner
AC DELCO DRIVE BELT TENSIONER ASSEMBLY, SOLD INDIVIDUALLY -- A high quality, OE replacement drive belt tensioner assembly; Replaces OE number 89049317; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38199 |
AC Delco |
$73.39 |
|
|
|
|
1987 Oldsmobile Firenza AC Delco Accessory Belt Tensioner
AC DELCO DRIVE BELT TENSIONER ASSEMBLY, SOLD INDIVIDUALLY -- A high quality, OE replacement drive belt tensioner assembly; Replaces OE number 88909595; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38105 |
AC Delco |
$63.29 |
|
|
|
|
1987-1988 Oldsmobile Firenza AC Delco Accessory Belt Idler Pulley
AC DELCO IDLER PULLEY -- A high quality, OE replacement idler pulley; Replaces OE number 19190148; With 12-month or 12,000-mile AC Delco limited warranty.
| Part Number |
Brand |
Price |
|
| AC1520679 |
AC Delco |
$29.88 |
|
|
|
|
1987 Oldsmobile Firenza AC Delco Accessory Belt Idler Pulley
AC DELCO BELT IDLER PULLEY, THERMOPLASTIC -- 76 x 17 x 25 mm, 6-groove,V-ribbed belt type; A high quality, OE replacement belt idler pulley; Replaces OE number 88909590; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38009 |
AC Delco |
$22.18 |
|
|
|
|
1987 Oldsmobile Firenza AC Delco Accessory Belt Idler Pulley
AC DELCO BELT IDLER PULLEY, THERMOPLASTIC -- 90 x 17 x 25.5 mm, smooth/backside pulley type; A high quality, OE replacement belt idler pulley; Replaces OE number 88909588; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38007 |
AC Delco |
$23.14 |
|
|
|
|
1985-1986 Oldsmobile Firenza AC Delco Accessory Belt Idler Pulley
AC DELCO BELT IDLER PULLEY, STEEL -- 3.19 x 0.67 x 0.71 in., V-ribbed; A high quality, direct fit OE replacement belt idler pulley; Replaces OE number 89032088; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38037 |
AC Delco |
$26.39 |
|
|
|
|
1985-1986 Oldsmobile Firenza AC Delco Accessory Belt Idler Pulley
AC DELCO BELT IDLER PULLEY, STEEL -- 90 x 17 x 30.5 mm, smooth/backside pulley type; A high quality, OE replacement belt idler pulley; Replaces OE number 88909582; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38001 |
AC Delco |
$27.89 |
|
|
|
|
|
1987 Oldsmobile Firenza Hayden Accessory Belt Tensioner
HAYDEN AUTOMATIC BELT TENSIONER, SOLD INDIVIDUALLY -- Smooth pulley type; OE quality for long life and easy replacement; Maintains constant tension on the belt to extend both belt and accessory drive bearing life.
| Part Number |
Brand |
Price |
|
| HY5895 |
Hayden |
$50.85 |
|
|
|
|
1985-1986 Oldsmobile Firenza Dorman Accessory Belt Idler Pulley
Dorman Products
Dorman Products, Inc. is a leading supplier of automotive products and hardware to the automotive aftermarket.
| Part Number |
Brand |
Price |
|
| W0133-1859045 |
Dorman |
$19.95 |
|
|
|
|
|
1982-1986 Oldsmobile Firenza Hayden Accessory Belt Idler Pulley
HAYDEN IDLER/TENSIONER PULLEY, STEEL -- 0.5 in. belt W, 3.125 in. pulley diameter, 3.188 in. OD, 0.67 in. ID, V-belt belt type, V-belt pulley type; Manufactured using the highest quality standards; Meets or exceeds OE specifications; Assists in belt routing and tensioning within the accessory drive system.
| Part Number |
Brand |
Price |
|
| HY5902 |
Hayden |
$14.44 |
|
|
|
|
|
1985-1986 Oldsmobile Firenza Hayden Accessory Belt Idler Pulley
HAYDEN IDLER/TENSIONER PULLEY, STEEL -- 1 in. belt W, 3.25 in. pulley diameter, 3.562 in. OD, 0.67 in. ID, serpentine belt type, flat groove, back idler pulley type; Manufactured using the highest quality standards; Meets or exceeds OE specifications; Assists in belt routing and tensioning within the accessory drive system.
| Part Number |
Brand |
Price |
|
| HY5975 |
Hayden |
$15.14 |
|
|
|
|
|
1982-1988 Oldsmobile Firenza Custom Accessories Cigarette Lighter
CUSTOM ACCESSORIES POP OUT LIGHTER, CHROME -- 12V; Dash style; Long knob; Illuminated; Made of chrome-plated material; Designed to fit most applications.
| Part Number |
Brand |
Price |
|
| CUA10220 |
Custom Accessories |
$5.86 |
|
|
|
|
|
1982-1988 Oldsmobile Firenza Custom Accessories Cigarette Lighter
CUSTOM ACCESSORIES POP OUT LIGHTER, CHROME -- 12V; Ashtray style; Illuminated; Designed to fit most applications.
| Part Number |
Brand |
Price |
|
| CUA10225 |
Custom Accessories |
$5.86 |
|
|
|
|
1985-1986 Oldsmobile Firenza Dorman Accessory Belt Adjust Pulley
Dorman Products
Dorman Products, Inc. is a leading supplier of automotive products and hardware to the automotive aftermarket.
| Part Number |
Brand |
Price |
|
| W0133-1859184 |
Dorman |
$18.95 |
|
|
