|
|
1987-1996 Oldsmobile Cutlass Ciera Dayco Accessory Belt Tensioner
DAYCO NO SLACK AUTOMATIC BELT TENSIONER -- Designed to maintain constant tension on serpentine belt drives; Features a patented flat spring design that provides less operating range variations in tension, reduces the risk of premature accessory bearing failure, and lessens the risk of belt squeal and slippage or poor accessory performance; Designed with a Teflon strip wound within the spring to resist abrasion; A heavy-duty cast aluminum arm offers additional strength and less distortion, an aluminum retainer ring locks the spring case and arm together and seals against corrosion, a thermoplastic rubber spring slot plug keeps out harmful contaminants, and a rubber O-ring seals against dust and grime; The lubricated nylon pivot tube bushing and spring bushing promote quieter performance, while the zinc coated mounting bolt resists rust and is concentric for a more even degree of constant tension.
| Part Number |
Brand |
Price |
 |
| DY89203 |
Dayco |
$51.24 |
|
|
|
|
|
1993-1996 Oldsmobile Cutlass Ciera Dayco Accessory Belt Tensioner
DAYCO BELT TENSIONER -- Automatic Belt Tensioner, The Featured Patented Flat Spring Design Reduces The Risk Of Accessory Bearing Failure, Reduces The Risk Of Belt Squeal And Slippage, Or Poor Accessory Performance Caused By Low Tension, The Flat Spring Is Coated To Resist Rust, Heavy Duty Cast Aluminum Spring Case Resists Cracking, Heavy-Duty Cast Aluminum Arm Offers Additional Strength And Less Distortion
| Part Number |
Brand |
Price |
|
| DY89226 |
Dayco |
$87.03 |
|
|
|
|
|
1992-1993 Oldsmobile Cutlass Ciera Dayco Accessory Belt Tensioner
DAYCO BELT TENSIONER -- Automatic Belt Tensioner, The Featured Patented Flat Spring Design Reduces The Risk Of Accessory Bearing Failure, Reduces The Risk Of Belt Squeal And Slippage, Or Poor Accessory Performance Caused By Low Tension, The Flat Spring Is Coated To Resist Rust, Heavy Duty Cast Aluminum Spring Case Resists Cracking, Heavy-Duty Cast Aluminum Arm Offers Additional Strength And Less Distortion
| Part Number |
Brand |
Price |
|
| DY89250 |
Dayco |
$149.24 |
|
|
|
|
|
1987-1992 Oldsmobile Cutlass Ciera Dayco Accessory Belt Tensioner
DAYCO BELT TENSIONER -- Automatic Belt Tensioner, The Featured Patented Flat Spring Design Reduces The Risk Of Accessory Bearing Failure, Reduces The Risk Of Belt Squeal And Slippage, Or Poor Accessory Performance Caused By Low Tension, The Flat Spring Is Coated To Resist Rust, Heavy Duty Cast Aluminum Spring Case Resists Cracking, Heavy-Duty Cast Aluminum Arm Offers Additional Strength And Less Distortion
| Part Number |
Brand |
Price |
|
| DY89242 |
Dayco |
$73.59 |
|
|
|
|
|
1989-1991 Oldsmobile Cutlass Ciera Dayco Accessory Belt Tensioner
DAYCO BELT TENSIONER -- Automatic Belt Tensioner, The Featured Patented Flat Spring Design Reduces The Risk Of Accessory Bearing Failure, Reduces The Risk Of Belt Squeal And Slippage, Or Poor Accessory Performance Caused By Low Tension, The Flat Spring Is Coated To Resist Rust, Heavy Duty Cast Aluminum Spring Case Resists Cracking, Heavy-Duty Cast Aluminum Arm Offers Additional Strength And Less Distortion
| Part Number |
Brand |
Price |
|
| DY89365 |
Dayco |
$155.29 |
|
|
|
|
|
1986-1988 Oldsmobile Cutlass Ciera Dayco Accessory Belt Tensioner
DAYCO BELT TENSIONER -- Automatic Belt Tensioner, The Featured Patented Flat Spring Design Reduces The Risk Of Accessory Bearing Failure, Reduces The Risk Of Belt Squeal And Slippage, Or Poor Accessory Performance Caused By Low Tension, The Flat Spring Is Coated To Resist Rust, Heavy Duty Cast Aluminum Spring Case Resists Cracking, Heavy-Duty Cast Aluminum Arm Offers Additional Strength And Less Distortion
| Part Number |
Brand |
Price |
|
| DY89366 |
Dayco |
$208.74 |
|
|
|
|
1989-1993 Oldsmobile Cutlass Ciera Replacement Accessory Belt Tension Pulley
ACCESSORY BELT TENSIONER PULLEY -- 3.23 in. OD; 0.67 in. ID; 1.02 W; Flat; With polymer flange; A high quality, OE replacement accessory belt tensioner pulley; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| REPM315402 |
Replacement |
$17.05 |
|
|
|
|
|
1987-1989 Oldsmobile Cutlass Ciera Dayco Accessory Belt Tension Pulley
DAYCO BELT TENSIONER PULLEY -- 76 mm diameter, 28.7 mm W, 17 mm bearing ID, 06 rib maximum belt W, 1-bearing, non-flat polymer with flange, serpentine pulley type; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance; With Dayco limited warranty.
| Part Number |
Brand |
Price |
|
| DY89009 |
Dayco |
$16.84 |
|
|
|
|
|
1987-1996 Oldsmobile Cutlass Ciera Dayco Accessory Belt Tension Pulley
DAYCO BELT TENSIONER PULLEY -- 100 mm diameter, 28 mm W, 17 mm bearing ID, 06 rib maximum belt W, 1-bearing, flat steel without flange, serpentine pulley type; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance; With Dayco limited warranty.
| Part Number |
Brand |
Price |
|
| DY89026 |
Dayco |
$29.74 |
|
|
|
|
|
1989-1993 Oldsmobile Cutlass Ciera Dayco Accessory Belt Tension Pulley
DAYCO BELT TENSIONER PULLEY -- 82 mm diameter, 26 mm W, 17 mm bearing ID, 06 rib maximum belt W, 1-bearing, flat polymer without flange, serpentine pulley type; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance; With Dayco limited warranty.
| Part Number |
Brand |
Price |
|
| DY89010 |
Dayco |
$24.08 |
|
|
|
|
|
1986 Oldsmobile Cutlass Ciera Dayco Accessory Belt Tension Pulley
DAYCO BELT TENSIONER PULLEY -- 81 mm diameter, 16.4 mm W, 17 mm bearing ID, 0.5 in. maximum belt W, 1 bearing, non-flat steel with flange, v-belt pulley type; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance; With Dayco limited warranty.
| Part Number |
Brand |
Price |
|
| DY89036 |
Dayco |
$24.92 |
|
|
|
|
1994-1996 Oldsmobile Cutlass Ciera Gates Accessory Belt Tensioner
Gates
Gates is one of the world's leading manufacturers of drive belt components and offers the most complete line of OE specified drive belt products to the automotive aftermarket.
| Part Number |
Brand |
Price |
|
| W0133-1865688 |
Gates |
$116.95 |
|
|
|
|
1987-1996 Oldsmobile Cutlass Ciera Gates Accessory Belt Tensioner
Gates
Gates is one of the world's leading manufacturers of drive belt components and offers the most complete line of OE specified drive belt products to the automotive aftermarket.
| Part Number |
Brand |
Price |
|
| W0133-1864247 |
Gates |
$106.95 |
|
|
|
|
|
1987-1996 Oldsmobile Cutlass Ciera Gates Accessory Belt Tensioner
GATES DRIVEALIGN AUTO TENSIONER -- 17 mm bearing bore inside diameter, 90 mm outside diameter, 25.5 mm width, 6-rib V-ribbed belt type; Thermoplastic material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; With lifetime Gates limited warranty.
| Part Number |
Brand |
Price |
|
| GAT38105 |
Gates |
$44.21 |
|
|
|
|
|
1994-1996 Oldsmobile Cutlass Ciera Gates Accessory Belt Tensioner
GATES DRIVEALIGN AUTO TENSIONER -- 17 mm bearing bore inside diameter, 100 mm outside diameter, 28 mm width, 5-rib V-ribbed belt type; Steel material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; With lifetime Gates limited warranty.
| Part Number |
Brand |
Price |
|
| GAT38109 |
Gates |
$64.28 |
|
|
|
|
|
1992-1993 Oldsmobile Cutlass Ciera Gates Accessory Belt Tensioner
GATES DRIVEALIGN AUTO TENSIONER -- 17 mm bearing bore inside diameter, 82 mm outside diameter, 25 mm width, 6-rib V-ribbed belt type; Thermoplastic material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; With lifetime Gates limited warranty.
| Part Number |
Brand |
Price |
|
| GAT38128 |
Gates |
$108.15 |
|
|
|
|
|
1993 Oldsmobile Cutlass Ciera Gates Accessory Belt Tensioner
GATES DRIVEALIGN AUTO TENSIONER -- 17 mm bearing bore inside diameter, 100 mm outside diameter, 28 mm width, 5-rib V-ribbed belt type; Steel material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; With lifetime Gates limited warranty.
| Part Number |
Brand |
Price |
|
| GAT38109 |
Gates |
$64.28 |
|
|
|
|
|
1987-1992 Oldsmobile Cutlass Ciera Gates Accessory Belt Tensioner
GATES DRIVEALIGN AUTO TENSIONER -- 17 mm bearing bore inside diameter, 100 mm outside diameter, 30.5 mm width, 6-rib V-ribbed belt type; Steel material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; With lifetime Gates limited warranty.
| Part Number |
Brand |
Price |
|
| GAT38111 |
Gates |
$58.54 |
|
|
|
|
|
1989-1991 Oldsmobile Cutlass Ciera Gates Accessory Belt Tensioner
GATES DRIVEALIGN AUTO TENSIONER -- 17 mm bearing bore inside diameter, 82 mm outside diameter, 25 mm width; Thermoplastic material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; With lifetime Gates limited warranty.
| Part Number |
Brand |
Price |
|
| GAT38402 |
Gates |
$99.29 |
|
|
|
|
|
1986-1988 Oldsmobile Cutlass Ciera Gates Accessory Belt Tensioner
GATES DRIVEALIGN AUTO TENSIONER -- 17 mm bearing bore inside diameter, 90 mm outside diameter, 33 mm width; Steel material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; With lifetime Gates limited warranty.
| Part Number |
Brand |
Price |
|
| GAT38396 |
Gates |
$108.75 |
|
|
|
|
|
1982-1996 Oldsmobile Cutlass Ciera Dayco Accessory Belt Idler Pulley
DAYCO NO SLACK IDLER PULLEY -- 90 mm OD, 17 mm ID, 30 mm W, flat steel without flange; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance.
| Part Number |
Brand |
Price |
|
| DY89006 |
Dayco |
$24.64 |
|
|
|
|
|
1989-1993 Oldsmobile Cutlass Ciera Gates Accessory Belt Idler Pulley
GATES DriveAlign IDLER PULLEY -- A High Quality Idler Pulley, Bearing Bore I.D. 17mm, O.D. 82mm, Made Of Premium Materials For Longer Wear Life And Higher Load Capacity, Designed To Operate Under Severe Conditions And Provide Greater Reliability, Built With Premium Bearings And Seals That Can Operate At Higher Temperatures
| Part Number |
Brand |
Price |
|
| GAT38027 |
Gates |
$21.31 |
|
|
|
|
|
1987-1989 Oldsmobile Cutlass Ciera Gates Accessory Belt Idler Pulley
GATES DRIVEALIGN IDLER PULLEY -- 76 mm outside diameter, 25 mm width, 6-grooves, 6-rib V-ribbed belt type; Thermoplastic material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; Its robust and high quality pulley materials withstand contaminants, while its superior bearings outperform OE idler pulleys; Guaranteed to last up to 3 times longer than competitive aftermarket tensioners.
| Part Number |
Brand |
Price |
|
| GAT38009 |
Gates |
$15.54 |
|
|
|
|
1992-1993 Oldsmobile Cutlass Ciera Gates Accessory Belt Idler Pulley
Gates
Gates is one of the world's leading manufacturers of drive belt components and offers the most complete line of OE specified drive belt products to the automotive aftermarket.
| Part Number |
Brand |
Price |
|
| W0133-1649793 |
Gates |
$65.95 |
|
|
|
|
1987-1989 Oldsmobile Cutlass Ciera Gates Accessory Belt Idler Pulley
Gates
Gates is one of the world's leading manufacturers of drive belt components and offers the most complete line of OE specified drive belt products to the automotive aftermarket.
| Part Number |
Brand |
Price |
|
| W0133-1826638 |
Gates |
$35.95 |
|
|
|
|
1988 Oldsmobile Cutlass Ciera Gates Accessory Belt Idler Pulley
Gates
Gates is one of the world's leading manufacturers of drive belt components and offers the most complete line of OE specified drive belt products to the automotive aftermarket.
| Part Number |
Brand |
Price |
|
| W0133-1786610 |
Gates |
$43.95 |
|
|
|
|
|
1993-1996 Oldsmobile Cutlass Ciera Gates Accessory Belt Idler Pulley
GATES DriveAlign IDLER PULLEY -- A High Quality Idler Pulley, Bearing Bore I.D. 17mm, O.D. 100mm, Made Of Premium Materials For Longer Wear Life And Higher Load Capacity, Designed To Operate Under Severe Conditions And Provide Greater Reliability, Built With Premium Bearings And Seals That Can Operate At Higher Temperatures
| Part Number |
Brand |
Price |
|
| GAT38026 |
Gates |
$20.98 |
|
|
|
|
|
1987-1996 Oldsmobile Cutlass Ciera Gates Accessory Belt Idler Pulley
GATES DriveAlign IDLER PULLEY -- A High Quality Idler Pulley, Bearing Bore I.D. 17mm, O.D. 90mm, Made Of Premium Materials For Longer Wear Life And Higher Load Capacity, Designed To Operate Under Severe Conditions And Provide Greater Reliability, Built With Premium Bearings And Seals That Can Operate At Higher Temperatures
| Part Number |
Brand |
Price |
|
| GAT38007 |
Gates |
$14.91 |
|
|
|
|
|
1987-1992 Oldsmobile Cutlass Ciera Gates Accessory Belt Idler Pulley
GATES DriveAlign IDLER PULLEY -- A High Quality Idler Pulley, Bearing Bore I.D. 17mm, O.D. 100mm, Made Of Premium Materials For Longer Wear Life And Higher Load Capacity, Designed To Operate Under Severe Conditions And Provide Greater Reliability, Built With Premium Bearings And Seals That Can Operate At Higher Temperatures
| Part Number |
Brand |
Price |
|
| GAT38002 |
Gates |
$20.69 |
|
|
|
|
|
1986-1988 Oldsmobile Cutlass Ciera Gates Accessory Belt Idler Pulley
GATES DriveAlign IDLER PULLEY -- A High Quality Idler Pulley, Bearing Bore I.D. 17mm, O.D. 90mm, Made Of Premium Materials For Longer Wear Life And Higher Load Capacity, Designed To Operate Under Severe Conditions And Provide Greater Reliability, Built With Premium Bearings And Seals That Can Operate At Higher Temperatures
| Part Number |
Brand |
Price |
|
| GAT38012 |
Gates |
$19.91 |
|
|
|
|
|
1986 Oldsmobile Cutlass Ciera Gates Accessory Belt Idler Pulley
GATES DriveAlign IDLER PULLEY -- A High Quality Idler Pulley, Bearing Bore I.D. 17mm, O.D. 81mm, Made Of Premium Materials For Longer Wear Life And Higher Load Capacity, Designed To Operate Under Severe Conditions And Provide Greater Reliability, Built With Premium Bearings And Seals That Can Operate At Higher Temperatures
| Part Number |
Brand |
Price |
|
| GAT38037 |
Gates |
$22.73 |
|
|
|
|
|
1982-1985 Oldsmobile Cutlass Ciera Gates Accessory Belt Idler Pulley
GATES DriveAlign IDLER PULLEY -- A High Quality Idler Pulley, Bearing Bore I.D. 17mm, O.D. 90mm, Made Of Premium Materials For Longer Wear Life And Higher Load Capacity, Designed To Operate Under Severe Conditions And Provide Greater Reliability, Built With Premium Bearings And Seals That Can Operate At Higher Temperatures
| Part Number |
Brand |
Price |
|
| GAT38012 |
Gates |
$19.91 |
|
|
|
|
|
1987-1995 Oldsmobile Cutlass Ciera Covercraft Storage Bag
COVERCRAFT UV BAG -- A strong and durable storage of UV SunShield interior window covers.
| Part Number |
Brand |
Price |
|
| C59ZUBAGV3 |
Covercraft |
$5.21 |
|
|
|
|
|
1993 Oldsmobile Cutlass Ciera Covercraft Storage Bag
COVERCRAFT UV BAG -- A strong and durable storage of UV SunShield interior window covers.
| Part Number |
Brand |
Price |
|
| C59ZUBAGV3 |
Covercraft |
$5.21 |
|
|
|
|
|
1991-1992 Oldsmobile Cutlass Ciera Covercraft Storage Bag
COVERCRAFT UV BAG -- A strong and durable storage of UV SunShield interior window covers.
| Part Number |
Brand |
Price |
|
| C59ZUBAGV3 |
Covercraft |
$5.21 |
|
|
|
|
|
1984-1986 Oldsmobile Cutlass Ciera Covercraft Storage Bag
COVERCRAFT UV BAG -- A strong and durable storage of UV SunShield interior window covers.
| Part Number |
Brand |
Price |
|
| C59ZUBAGV7 |
Covercraft |
$5.21 |
|
|
|
|
|
1984-1986 Oldsmobile Cutlass Ciera Covercraft Storage Bag
COVERCRAFT UV BAG -- A strong and durable storage of UV SunShield interior window covers.
| Part Number |
Brand |
Price |
|
| C59ZUBAGV7 |
Covercraft |
$5.21 |
|
|
|
|
|
1982-1983 Oldsmobile Cutlass Ciera Covercraft Storage Bag
COVERCRAFT UV BAG -- A strong and durable storage of UV SunShield interior window covers.
| Part Number |
Brand |
Price |
|
| C59ZUBAGV7 |
Covercraft |
$5.21 |
|
|
|
|
1993-1996 Oldsmobile Cutlass Ciera Dorman Accessory Belt Tensioner
DORMAN AUTOMATIC BELT TENSIONER -- Serpentine Type; A high quality, direct fit OE replacement automatic belt tensioner; With lifetime Dorman limited warranty.
| Part Number |
Brand |
Price |
|
| RB419106 |
Dorman |
$51.88 |
|
|
|
|
1987-1996 Oldsmobile Cutlass Ciera Dorman Accessory Belt Tensioner
DORMAN AUTOMATIC BELT TENSIONER -- Serpentine Type; A high quality, direct fit OE replacement automatic belt tensioner; With lifetime Dorman limited warranty.
| Part Number |
Brand |
Price |
|
| RB419101 |
Dorman |
$34.99 |
|
|
|
|
1987-1992 Oldsmobile Cutlass Ciera Dorman Accessory Belt Tensioner
DORMAN AUTOMATIC BELT TENSIONER -- Serpentine Type; A high quality, direct fit OE replacement automatic belt tensioner; With lifetime Dorman limited warranty.
| Part Number |
Brand |
Price |
|
| RB419116 |
Dorman |
$45.62 |
|
|
|
|
1994-1996 Oldsmobile Cutlass Ciera AC Delco Accessory Belt Tensioner
AC DELCO DRIVE BELT TENSIONER ASSEMBLY, STEEL -- 100 mm x 17 mm x 28 mm, smooth/backside; A high quality, direct fit OE replacement drive belt tensioner assembly; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38109 |
AC Delco |
$94.28 |
|
|
|
|
1987-1996 Oldsmobile Cutlass Ciera AC Delco Accessory Belt Tensioner
AC DELCO DRIVE BELT TENSIONER ASSEMBLY, SOLD INDIVIDUALLY -- A high quality, OE replacement drive belt tensioner assembly; Replaces OE number 88909595; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38105 |
AC Delco |
$63.29 |
|
|
|
|
1992-1993 Oldsmobile Cutlass Ciera AC Delco Accessory Belt Tensioner
AC DELCO BELT TENSIONER, THERMOPLASTIC -- 3.23 x 0.67 x 0.98 in.; A high quality, direct fit OE replacement belt tensioner; Replaces OE number 88909614; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38128 |
AC Delco |
$141.68 |
|
|
|
|
|
1993 Oldsmobile Cutlass Ciera AC Delco Accessory Belt Tensioner
AC DELCO DRIVE BELT TENSIONER ASSEMBLY, STEEL -- 100 mm x 17 mm x 28 mm, smooth/backside; A high quality, direct fit OE replacement drive belt tensioner assembly; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38109 |
AC Delco |
$94.28 |
|
|
|
|
1987-1992 Oldsmobile Cutlass Ciera AC Delco Accessory Belt Tensioner
AC DELCO DRIVE BELT TENSIONER ASSEMBLY, SOLD INDIVIDUALLY -- A high quality, OE replacement drive belt tensioner assembly; Replaces OE number 88909601; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38111 |
AC Delco |
$83.88 |
|
|
|
|
1989-1991 Oldsmobile Cutlass Ciera AC Delco Accessory Belt Tensioner
AC DELCO BELT TENSIONER, THERMOPLASTIC -- 3.23 x 0.67 x 0.98 in.; A high quality, direct fit OE replacement belt tensioner; Replaces OE number 19163996; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38402 |
AC Delco |
$136.60 |
|
|
|
|
1987-1996 Oldsmobile Cutlass Ciera AC Delco Accessory Belt Idler Pulley
AC DELCO BELT IDLER PULLEY, THERMOPLASTIC -- 90 x 17 x 25.5 mm, smooth/backside pulley type; A high quality, OE replacement belt idler pulley; Replaces OE number 88909588; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38007 |
AC Delco |
$23.14 |
|
|
|
|
1993-1996 Oldsmobile Cutlass Ciera AC Delco Accessory Belt Idler Pulley
AC DELCO BELT IDLER PULLEY -- A high quality, OE replacement belt idler pulley; Replaces OE number 88996996; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38026 |
AC Delco |
$32.10 |
|
|
|
|
1987-1994 Oldsmobile Cutlass Ciera AC Delco Accessory Belt Idler Pulley
AC DELCO IDLER PULLEY -- A high quality, OE replacement idler pulley; Replaces OE number 19190145; With 12-month or 12,000-mile AC Delco limited warranty.
| Part Number |
Brand |
Price |
|
| AC1520676 |
AC Delco |
$16.64 |
|
|
