|
|
1997-2002 Ford Expedition Perf Accessories Body Lift Kit
PERFORMANCE ACCESSORIES BODY LIFT KIT -- 2 in. lift; Includes high grade nylon-reinforced lift blocks, rust-resistant front and rear bumper brackets, steering extension, mounting hardware, and installation instructions; Does not include gap guards; Made from grade 5 zinc plated material using state of the art CNC equipment; Allows the increase of tire size for greater ground clearance and rugged look; Does not alter or change suspension components and will not deteriorate factory ride quality nor void vehicle warranty; Gap guards recommended to keep the engine compartment clean; May require drilling the body bushing sleeves out to 1/2 in. for new bolt clearance; Not for vehicles with diesel engine; Cannot be used for towing; With Performance Accessories limited warranty.
| Part Number |
Brand |
Price |
 |
| P64872 |
Perf Accessories |
$166.43 |
|
|
|
|
|
2002-2011 Ford Expedition Dayco Accessory Belt Tensioner
DAYCO BELT TENSIONER -- Automatic Belt Tensioner, The Featured Patented Flat Spring Design Reduces The Risk Of Accessory Bearing Failure, Reduces The Risk Of Belt Squeal And Slippage, Or Poor Accessory Performance Caused By Low Tension, The Flat Spring Is Coated To Resist Rust, Heavy Duty Cast Aluminum Spring Case Resists Cracking, Heavy-Duty Cast Aluminum Arm Offers Additional Strength And Less Distortion
| Part Number |
Brand |
Price |
|
| DY89263 |
Dayco |
$40.53 |
|
|
|
|
|
2003 Ford Expedition Dayco Accessory Belt Tensioner
DAYCO BELT TENSIONER -- Automatic Belt Tensioner, The Featured Patented Flat Spring Design Reduces The Risk Of Accessory Bearing Failure, Reduces The Risk Of Belt Squeal And Slippage, Or Poor Accessory Performance Caused By Low Tension, The Flat Spring Is Coated To Resist Rust, Heavy Duty Cast Aluminum Spring Case Resists Cracking, Heavy-Duty Cast Aluminum Arm Offers Additional Strength And Less Distortion
| Part Number |
Brand |
Price |
|
| DY89263 |
Dayco |
$40.53 |
|
|
|
|
|
1997-2001 Ford Expedition Dayco Accessory Belt Tensioner
DAYCO NO SLACK AUTOMATIC BELT TENSIONER -- Designed to maintain constant tension on serpentine belt drives; Features a patented flat spring design that provides less operating range variations in tension, reduces the risk of premature accessory bearing failure, and lessens the risk of belt squeal and slippage or poor accessory performance; Designed with a Teflon strip wound within the spring to resist abrasion; A heavy-duty cast aluminum arm offers additional strength and less distortion, an aluminum retainer ring locks the spring case and arm together and seals against corrosion, a thermoplastic rubber spring slot plug keeps out harmful contaminants, and a rubber O-ring seals against dust and grime; The lubricated nylon pivot tube bushing and spring bushing promote quieter performance, while the zinc coated mounting bolt resists rust and is concentric for a more even degree of constant tension.
| Part Number |
Brand |
Price |
|
| DY89237 |
Dayco |
$46.89 |
|
|
|
|
|
1997-2001 Ford Expedition Dayco Accessory Belt Tensioner
DAYCO NO SLACK AUTOMATIC BELT TENSIONER -- Designed to maintain constant tension on serpentine belt drives; Features a patented flat spring design that provides less operating range variations in tension, reduces the risk of premature accessory bearing failure, and lessens the risk of belt squeal and slippage or poor accessory performance; Designed with a Teflon strip wound within the spring to resist abrasion; A heavy-duty cast aluminum arm offers additional strength and less distortion, an aluminum retainer ring locks the spring case and arm together and seals against corrosion, a thermoplastic rubber spring slot plug keeps out harmful contaminants, and a rubber O-ring seals against dust and grime; The lubricated nylon pivot tube bushing and spring bushing promote quieter performance, while the zinc coated mounting bolt resists rust and is concentric for a more even degree of constant tension.
| Part Number |
Brand |
Price |
|
| DY89237 |
Dayco |
$46.89 |
|
|
|
|
2003-2009 Ford Expedition Replacement Accessory Belt Tension Pulley
ACCESSORY BELT TENSIONER PULLEY -- 3 in. OD; 1.22 in. W; Flat; With steel flange; A high quality, OE replacement accessory belt tensioner pulley; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| REPC313813 |
Replacement |
$4.87 |
|
|
|
|
|
2006 Ford Expedition Replacement Accessory Belt Tension Pulley
ACCESSORY BELT TENSIONER PULLEY -- 3 in. OD; 1.22 in. W; Flat; With steel flange; A high quality, OE replacement accessory belt tensioner pulley; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| REPC313813 |
Replacement |
$4.87 |
|
|
|
|
|
2002-2011 Ford Expedition Dayco Accessory Belt Tension Pulley
DAYCO BELT TENSIONER PULLEY -- 76 mm diameter, 31 mm W, 17 mm bearing ID, 06 rib maximum belt W, 1-bearing, flat steel without flange, serpentine pulley type; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance; With Dayco limited warranty.
| Part Number |
Brand |
Price |
|
| DY89007 |
Dayco |
$18.71 |
|
|
|
|
|
2003 Ford Expedition Dayco Accessory Belt Tension Pulley
DAYCO BELT TENSIONER PULLEY -- 76 mm diameter, 31 mm W, 17 mm bearing ID, 06 rib maximum belt W, 1-bearing, flat steel without flange, serpentine pulley type; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance; With Dayco limited warranty.
| Part Number |
Brand |
Price |
|
| DY89007 |
Dayco |
$18.71 |
|
|
|
|
|
1997-2003 Ford Expedition Dayco Accessory Belt Tension Pulley
DAYCO BELT TENSIONER PULLEY -- 90 mm diameter, 37 mm W, 17 mm bearing ID, 08 rib maximum belt W, 1-bearing, flat steel without flange, serpentine pulley type; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance; With Dayco limited warranty.
| Part Number |
Brand |
Price |
|
| DY89048 |
Dayco |
$31.71 |
|
|
|
|
|
1997-2001 Ford Expedition Dayco Accessory Belt Tension Pulley
DAYCO BELT TENSIONER PULLEY -- 76 mm diameter, 37 mm W, 17 mm bearing ID, 08 rib maximum belt W, 1-bearing, flat steel without flange, serpentine pulley type; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance; With Dayco limited warranty.
| Part Number |
Brand |
Price |
|
| DY89016 |
Dayco |
$21.11 |
|
|
|
|
|
1997-2001 Ford Expedition Dayco Accessory Belt Tension Pulley
DAYCO BELT TENSIONER PULLEY -- 90 mm diameter, 37 mm W, 17 mm bearing ID, 08 rib maximum belt W, 1-bearing, flat steel without flange, serpentine pulley type; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance; With Dayco limited warranty.
| Part Number |
Brand |
Price |
|
| DY89048 |
Dayco |
$31.71 |
|
|
|
|
|
1997-2001 Ford Expedition Dayco Accessory Belt Tension Pulley
DAYCO BELT TENSIONER PULLEY -- 76 mm diameter, 37 mm W, 17 mm bearing ID, 08 rib maximum belt W, 1-bearing, flat steel without flange, serpentine pulley type; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance; With Dayco limited warranty.
| Part Number |
Brand |
Price |
|
| DY89016 |
Dayco |
$21.11 |
|
|
|
|
|
2000 Ford Expedition Dayco Accessory Belt Tension Pulley
DAYCO BELT TENSIONER PULLEY -- 76 mm diameter, 38.1 mm W, 17 mm bearing ID, 08 rib maximum belt W, 1-bearing, non-flat steel with flange, serpentine pulley type; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance; With Dayco limited warranty.
| Part Number |
Brand |
Price |
|
| DY89053 |
Dayco |
$28.09 |
|
|
|
|
2003-2011 Ford Expedition Gates Accessory Belt Tensioner
Gates
Gates is one of the world's leading manufacturers of drive belt components and offers the most complete line of OE specified drive belt products to the automotive aftermarket.
| Part Number |
Brand |
Price |
|
| W0133-1863955 |
Gates |
$84.95 |
|
|
|
|
1997-2002 Ford Expedition Gates Accessory Belt Tensioner
Gates
Gates is one of the world's leading manufacturers of drive belt components and offers the most complete line of OE specified drive belt products to the automotive aftermarket.
| Part Number |
Brand |
Price |
|
| W0133-1863984 |
Gates |
$89.95 |
|
|
|
|
|
2004-2011 Ford Expedition Gates Accessory Belt Tensioner
GATES DRIVEALIGN AUTO TENSIONER -- 17 mm bearing bore inside diameter, 76 mm outside diameter, 30.5 mm width; Steel material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; With lifetime Gates limited warranty.
| Part Number |
Brand |
Price |
|
| GAT38274 |
Gates |
$39.32 |
|
|
|
|
|
2002-2003 Ford Expedition Gates Accessory Belt Tensioner
GATES DRIVEALIGN AUTO TENSIONER -- 17 mm bearing bore inside diameter, 76 mm outside diameter, 30.5 mm width; Steel material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; With lifetime Gates limited warranty.
| Part Number |
Brand |
Price |
|
| GAT38274 |
Gates |
$39.32 |
|
|
|
|
|
1997-2001 Ford Expedition Gates Accessory Belt Tensioner
GATES DRIVEALIGN AUTO TENSIONER -- 17 mm bearing bore inside diameter, 76 mm outside diameter, 34 mm width, 8-rib V-ribbed belt type; Thermoplastic material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; With lifetime Gates limited warranty.
| Part Number |
Brand |
Price |
|
| GAT38133 |
Gates |
$36.88 |
|
|
|
|
|
2002-2011 Ford Expedition Dayco Accessory Belt Idler Pulley
DAYCO NO SLACK IDLER PULLEY -- 90 mm OD, 17 mm ID, 30 mm W, flat steel without flange; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance.
| Part Number |
Brand |
Price |
|
| DY89006 |
Dayco |
$24.64 |
|
|
|
|
|
2003-2011 Ford Expedition Dayco Accessory Belt Idler Pulley
DAYCO NO SLACK IDLER PULLEY -- Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance; With Dayco limited warranty.
| Part Number |
Brand |
Price |
|
| DY89130 |
Dayco |
$21.28 |
|
|
|
|
|
2002-2011 Ford Expedition Gates Accessory Belt Idler Pulley
GATES DRIVEALIGN IDLER PULLEY -- 90 mm outside diameter, 30.5 mm width, 6-rib V-ribbed belt type; Steel material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; Its robust and high quality pulley materials withstand contaminants, while its superior bearings outperform OE idler pulleys; Guaranteed to last up to 3 times longer than competitive aftermarket tensioners.
| Part Number |
Brand |
Price |
|
| GAT38001 |
Gates |
$22.23 |
|
|
|
|
|
2002-2011 Ford Expedition Gates Accessory Belt Idler Pulley
GATES DRIVEALIGN IDLER PULLEY -- 76 mm outside diameter, 30.5 mm width, 6-rib V-ribbed belt type; Steel material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; Its robust and high quality pulley materials withstand contaminants, while its superior bearings outperform OE idler pulleys; Guaranteed to last up to 3 times longer than competitive aftermarket tensioners.
| Part Number |
Brand |
Price |
|
| GAT38006 |
Gates |
$16.78 |
|
|
|
|
2003-2011 Ford Expedition Gates Accessory Belt Idler Pulley
Gates
Gates is one of the world's leading manufacturers of drive belt components and offers the most complete line of OE specified drive belt products to the automotive aftermarket.
| Part Number |
Brand |
Price |
|
| W0133-1700358 |
Gates |
$34.95 |
|
|
|
|
2003-2008 Ford Expedition Gates Accessory Belt Idler Pulley
Gates
Gates is one of the world's leading manufacturers of drive belt components and offers the most complete line of OE specified drive belt products to the automotive aftermarket.
| Part Number |
Brand |
Price |
|
| W0133-1702422 |
Gates |
$58.95 |
|
|
|
|
2008 Ford Expedition Gates Accessory Belt Idler Pulley
Gates
Gates is one of the world's leading manufacturers of drive belt components and offers the most complete line of OE specified drive belt products to the automotive aftermarket.
| Part Number |
Brand |
Price |
|
| W0133-1786610 |
Gates |
$43.95 |
|
|
|
|
|
2005-2007 Ford Expedition Gates Accessory Belt Idler Pulley
Gates
Gates is one of the world's leading manufacturers of drive belt components and offers the most complete line of OE specified drive belt products to the automotive aftermarket.
| Part Number |
Brand |
Price |
|
| W0133-1786610 |
Gates |
$43.95 |
|
|
|
|
1997-2002 Ford Expedition Gates Accessory Belt Idler Pulley
Gates
Gates is one of the world's leading manufacturers of drive belt components and offers the most complete line of OE specified drive belt products to the automotive aftermarket.
| Part Number |
Brand |
Price |
|
| W0133-1703732 |
Gates |
$65.95 |
|
|
|
|
|
2002-2011 Ford Expedition Gates Accessory Belt Idler Pulley
GATES DRIVEALIGN IDLER PULLEY, STEEL -- 6-groove, 31 mm W, 87 mm OD; Features high quality and high strength bearings that run cooler and outlast original bearings; Has reinforced polymer construction to resist under-hood contaminants; Meets or exceeds OEM specifications; For use on vehicles with locked center and automatic tensioners; With Gates' limited lifetime warranty.
| Part Number |
Brand |
Price |
|
| GAT36157 |
Gates |
$23.41 |
|
|
|
|
|
1997-2001 Ford Expedition Gates Accessory Belt Idler Pulley
GATES DriveAlign IDLER PULLEY -- A High Quality Idler Pulley, Bearing Bore I.D. 17mm, O.D. 76mm, Made Of Premium Materials For Longer Wear Life And Higher Load Capacity, Designed To Operate Under Severe Conditions And Provide Greater Reliability, Built With Premium Bearings And Seals That Can Operate At Higher Temperatures
| Part Number |
Brand |
Price |
|
| GAT38023 |
Gates |
$19.14 |
|
|
|
|
|
1997-2001 Ford Expedition Gates Accessory Belt Idler Pulley
GATES DriveAlign IDLER PULLEY -- A High Quality Idler Pulley, Bearing Bore I.D. 17mm, O.D. 90mm, Made Of Premium Materials For Longer Wear Life And Higher Load Capacity, Designed To Operate Under Severe Conditions And Provide Greater Reliability, Built With Premium Bearings And Seals That Can Operate At Higher Temperatures
| Part Number |
Brand |
Price |
|
| GAT38022 |
Gates |
$24.97 |
|
|
|
|
|
1997-2011 Ford Expedition Covercraft Storage Bag
COVERCRAFT UV BAG -- A strong and durable storage of UV SunShield interior window covers.
| Part Number |
Brand |
Price |
|
| C59ZUBAGV4 |
Covercraft |
$5.21 |
|
|
|
|
1997-2002 Ford Expedition Dorman Accessory Belt Tensioner
DORMAN AUTOMATIC BELT TENSIONER -- Serpentine Type; A high quality, direct fit OE replacement automatic belt tensioner; With lifetime Dorman limited warranty.
| Part Number |
Brand |
Price |
|
| RB419207 |
Dorman |
$31.01 |
|
|
|
|
|
2003-2012 Ford Expedition Motorcraft Accessory Belt Tensioner
MOTORCRAFT BELT TENSIONER -- Designed to perform in harsh underhood environment and provides less operating range variation under tension, helping to minimize premature failure and poor performance; Features a cast-aluminum spring case and arm to resist cracking and fatigue; Sealed-for-life bearing offers long service life; Easy to install; Replaces OE part number 1L2Z6B209AA; With Motorcraft's limited 12-month or 12,000-mile warranty.
| Part Number |
Brand |
Price |
|
| MIBT61 |
Motorcraft |
$52.17 |
|
|
|
|
|
1997-2002 Ford Expedition Motorcraft Accessory Belt Tensioner
MOTORCRAFT BELT TENSIONER -- Designed to perform in harsh underhood environment and provides less operating range variation under tension, helping to minimize premature failure and poor performance; Features a cast-aluminum spring case and arm to resist cracking and fatigue; Sealed-for-life bearing offers long service life; Easy to install; Replaces OE part number 1L3Z6B209AA; With Motorcraft's limited 12-month or 12,000-mile warranty.
| Part Number |
Brand |
Price |
|
| MIBT62 |
Motorcraft |
$51.15 |
|
|
|
|
|
2002 Ford Expedition Motorcraft Accessory Belt Tensioner
MOTORCRAFT BELT TENSIONER -- Designed to perform in harsh underhood environment and provides less operating range variation under tension, helping to minimize premature failure and poor performance; Features a cast-aluminum spring case and arm to resist cracking and fatigue; Sealed-for-life bearing offers long service life; Easy to install; Replaces OE part number 1L3Z6B209AA; With Motorcraft's limited 12-month or 12,000-mile warranty.
| Part Number |
Brand |
Price |
|
| MIBT62 |
Motorcraft |
$51.15 |
|
|
|
|
2004-2011 Ford Expedition AC Delco Accessory Belt Tensioner
AC DELCO BELT TENSIONER, STEEL -- 2.99 x 0.67 x 1.2 in.; A high quality, direct fit OE replacement belt tensioner; Replaces OE number 19111827; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38274 |
AC Delco |
$46.47 |
|
|
|
|
|
2002-2003 Ford Expedition AC Delco Accessory Belt Tensioner
AC DELCO BELT TENSIONER, STEEL -- 2.99 x 0.67 x 1.2 in.; A high quality, direct fit OE replacement belt tensioner; Replaces OE number 19111827; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38274 |
AC Delco |
$46.47 |
|
|
|
|
1997-2001 Ford Expedition AC Delco Accessory Belt Tensioner
AC DELCO BELT TENSIONER, THERMOPLASTIC -- 2.99 x 0.67 x 1.34 in.; A high quality, direct fit OE replacement belt tensioner; Replaces OE number 88916631; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38133 |
AC Delco |
$49.78 |
|
|
|
|
|
1997-2002 Ford Expedition Perf Accessories Body Lift Gap Guard
PERFORMANCE ACCESSORIES BODY LIFT GAP GUARDS, URETHANE, SET OF 4 -- Includes all necessary hardware and installation instructions; Made of durable urethane; Thicker and heavier and has a better fit; Will last far longer than any similar rubber-based product on the market.
| Part Number |
Brand |
Price |
|
| P646735 |
Perf Accessories |
$69.44 |
|
|
|
|
2002-2011 Ford Expedition AC Delco Accessory Belt Idler Pulley
AC DELCO BELT IDLER PULLEY -- A high quality, direct fit OE replacement belt idler pulley; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC36157 |
AC Delco |
$32.54 |
|
|
|
|
2002-2011 Ford Expedition AC Delco Accessory Belt Idler Pulley
AC DELCO BELT IDLER PULLEY, STEEL -- 76 x 17 x 30.5 mm, smooth/backside pulley type; A high quality, OE replacement belt idler pulley; Replaces OE number 88909587; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38006 |
AC Delco |
$22.84 |
|
|
|
|
2002-2011 Ford Expedition AC Delco Accessory Belt Idler Pulley
AC DELCO BELT IDLER PULLEY, STEEL -- 90 x 17 x 30.5 mm, smooth/backside pulley type; A high quality, OE replacement belt idler pulley; Replaces OE number 88909582; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38001 |
AC Delco |
$27.89 |
|
|
|
|
1997-2001 Ford Expedition AC Delco Accessory Belt Idler Pulley
AC DELCO BELT IDLER PULLEY, STEEL -- 90 x 17 x 37.5 mm, smooth/backside pulley type; A high quality, OE replacement belt idler pulley; Replaces OE number 88926779; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38022 |
AC Delco |
$36.23 |
|
|
|
|
1997-2001 Ford Expedition AC Delco Accessory Belt Idler Pulley
AC DELCO BELT IDLER PULLEY, THERMOPLASTIC -- 76 mm x 17 mm x 34 mm, smooth/backside; A high quality, direct fit OE replacement belt idler pulley; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38023 |
AC Delco |
$30.26 |
|
|
|
|
2002-2009 Ford Expedition Dorman Accessory Belt Idler Pulley
DORMAN IDLER PULLEY, STEEL -- 1.18 in. width, 3.54 in. OD; Profiled type; A high quality, direct fit OE replacement idler pulley; With lifetime Dorman limited warranty.
| Part Number |
Brand |
Price |
|
| RB419602 |
Dorman |
$9.14 |
|
|
|
|
1997-2002 Ford Expedition Dorman Accessory Belt Idler Pulley
DORMAN IDLER PULLEY, STEEL -- 1.57 in. width, 3.54 in. OD; Profiled type; A high quality, direct fit OE replacement idler pulley; With lifetime Dorman limited warranty.
| Part Number |
Brand |
Price |
|
| RB419605 |
Dorman |
$15.46 |
|
|
|
|
|
2003-2011 Ford Expedition Motorcraft Accessory Belt Idler Pulley
MOTORCRAFT DRIVE BELT IDLER PULLEY -- Designed and tested to meet OE specifications for durability and reliability under extreme conditions; Reduces the bounce of wheels and provide a smooth ride; Improves control and traction; Provides comfort and performance under changing loads and driving conditions; Replaces OE part number 1L2Z8678AB; With 12-month or 12,000-mile Motorcraft limited warranty.
| Part Number |
Brand |
Price |
|
| MIYS253 |
Motorcraft |
$35.69 |
|
|
|
|
|
1997-2002 Ford Expedition Motorcraft Accessory Belt Idler Pulley
MOTORCRAFT DRIVE BELT IDLER PULLEY -- Designed and tested to meet OE specifications for durability and reliability under extreme conditions; Reduces the bounce of wheels and provide a smooth ride; Improves control and traction; Provides comfort and performance under changing loads and driving conditions; Replaces OE part number F65Z8678AAA; With 12-month or 12,000-mile Motorcraft limited warranty.
| Part Number |
Brand |
Price |
|
| MIYS250 |
Motorcraft |
$36.72 |
|
|
|
|
|
2002-2005 Ford Expedition Hayden Accessory Belt Idler Pulley
HAYDEN IDLER/TENSIONER PULLEY, STEEL -- 1 in. belt W, 3.25 in. pulley diameter, 3.562 in. OD, 0.67 in. ID, serpentine belt type, flat groove, back idler pulley type; Manufactured using the highest quality standards; Meets or exceeds OE specifications; Assists in belt routing and tensioning within the accessory drive system.
| Part Number |
Brand |
Price |
|
| HY5975 |
Hayden |
$15.14 |
|
|
