|
|
1987-1996 Chevrolet Beretta Replacement Accessory Belt Tensioner
AUTOMATIC BELT TENSIONER -- Flat; Serpentine type; A high quality, OE replacement automatic belt tensioner; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
 |
| REPC313805 |
Replacement |
$20.16 |
|
|
|
|
1987-1996 Chevrolet Beretta Dayco Accessory Belt Tensioner
DAYCO NO SLACK AUTOMATIC BELT TENSIONER -- Designed to maintain constant tension on serpentine belt drives; Features a patented flat spring design that provides less operating range variations in tension, reduces the risk of premature accessory bearing failure, and lessens the risk of belt squeal and slippage or poor accessory performance; Designed with a Teflon strip wound within the spring to resist abrasion; A heavy-duty cast aluminum arm offers additional strength and less distortion, an aluminum retainer ring locks the spring case and arm together and seals against corrosion, a thermoplastic rubber spring slot plug keeps out harmful contaminants, and a rubber O-ring seals against dust and grime; The lubricated nylon pivot tube bushing and spring bushing promote quieter performance, while the zinc coated mounting bolt resists rust and is concentric for a more even degree of constant tension.
| Part Number |
Brand |
Price |
|
| DY89203 |
Dayco |
$40.99 |
|
|
|
|
|
1987-1996 Chevrolet Beretta Dayco Accessory Belt Tensioner
DAYCO BELT TENSIONER -- Automatic Belt Tensioner, The Featured Patented Flat Spring Design Reduces The Risk Of Accessory Bearing Failure, Reduces The Risk Of Belt Squeal And Slippage, Or Poor Accessory Performance Caused By Low Tension, The Flat Spring Is Coated To Resist Rust, Heavy Duty Cast Aluminum Spring Case Resists Cracking, Heavy-Duty Cast Aluminum Arm Offers Additional Strength And Less Distortion
| Part Number |
Brand |
Price |
|
| DY89226 |
Dayco |
$87.03 |
|
|
|
|
|
1992-1995 Chevrolet Beretta Dayco Accessory Belt Tensioner
DAYCO BELT TENSIONER -- Automatic Belt Tensioner, The Featured Patented Flat Spring Design Reduces The Risk Of Accessory Bearing Failure, Reduces The Risk Of Belt Squeal And Slippage, Or Poor Accessory Performance Caused By Low Tension, The Flat Spring Is Coated To Resist Rust, Heavy Duty Cast Aluminum Spring Case Resists Cracking, Heavy-Duty Cast Aluminum Arm Offers Additional Strength And Less Distortion
| Part Number |
Brand |
Price |
|
| DY89229 |
Dayco |
$84.29 |
|
|
|
|
|
1990-1994 Chevrolet Beretta Dayco Accessory Belt Tensioner
DAYCO BELT TENSIONER -- Automatic Belt Tensioner, The Featured Patented Flat Spring Design Reduces The Risk Of Accessory Bearing Failure, Reduces The Risk Of Belt Squeal And Slippage, Or Poor Accessory Performance Caused By Low Tension, The Flat Spring Is Coated To Resist Rust, Heavy Duty Cast Aluminum Spring Case Resists Cracking, Heavy-Duty Cast Aluminum Arm Offers Additional Strength And Less Distortion
| Part Number |
Brand |
Price |
|
| DY89234 |
Dayco |
$44.75 |
|
|
|
|
1988-1994 Chevrolet Beretta Dayco Accessory Belt Tension Pulley
DAYCO BELT TENSIONER PULLEY -- 76 mm diameter, 28.7 mm W, 17 mm bearing ID, 06 rib maximum belt W, 1-bearing, non-flat polymer with flange, serpentine pulley type; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance; With Dayco limited warranty.
| Part Number |
Brand |
Price |
|
| DY89009 |
Dayco |
$16.84 |
|
|
|
|
|
1987 Chevrolet Beretta Dayco Accessory Belt Tension Pulley
DAYCO BELT TENSIONER PULLEY -- 76 mm diameter, 28.7 mm W, 17 mm bearing ID, 06 rib maximum belt W, 1-bearing, non-flat polymer with flange, serpentine pulley type; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance; With Dayco limited warranty.
| Part Number |
Brand |
Price |
|
| DY89009 |
Dayco |
$16.84 |
|
|
|
|
1987-1996 Chevrolet Beretta Dayco Accessory Belt Tension Pulley
DAYCO BELT TENSIONER PULLEY -- 100 mm diameter, 28 mm W, 17 mm bearing ID, 06 rib maximum belt W, 1-bearing, flat steel without flange, serpentine pulley type; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance; With Dayco limited warranty.
| Part Number |
Brand |
Price |
|
| DY89026 |
Dayco |
$27.50 |
|
|
|
|
1990-1994 Chevrolet Beretta Dayco Accessory Belt Tension Pulley
DAYCO BELT TENSIONER PULLEY -- 76 mm diameter, 22 mm W, 17 mm bearing ID, 05 rib maximum belt W, 1-bearing, flat polymer without flange, serpentine pulley type; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance; With Dayco limited warranty.
| Part Number |
Brand |
Price |
|
| DY89037 |
Dayco |
$21.04 |
|
|
|
|
1987-1996 Chevrolet Beretta Gates Accessory Belt Tensioner
Gates
Gates is one of the world's leading manufacturers of drive belt components and offers the most complete line of OE specified drive belt products to the automotive aftermarket.
| Part Number |
Brand |
Price |
|
| W0133-1864247 |
Gates |
$106.95 |
|
|
|
|
1987-1996 Chevrolet Beretta Gates Accessory Belt Tensioner
Gates
Gates is one of the world's leading manufacturers of drive belt components and offers the most complete line of OE specified drive belt products to the automotive aftermarket.
| Part Number |
Brand |
Price |
|
| W0133-1865688 |
Gates |
$119.95 |
|
|
|
|
1990-1994 Chevrolet Beretta Gates Accessory Belt Tensioner
Gates
Gates is one of the world's leading manufacturers of drive belt components and offers the most complete line of OE specified drive belt products to the automotive aftermarket.
| Part Number |
Brand |
Price |
|
| W0133-1622336 |
Gates |
$78.95 |
|
|
|
|
1987-1996 Chevrolet Beretta Gates Accessory Belt Tensioner
GATES DRIVEALIGN AUTO TENSIONER -- 17 mm bearing bore inside diameter, 90 mm outside diameter, 25.5 mm width, 6-rib V-ribbed belt type; Thermoplastic material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; With lifetime Gates limited warranty.
| Part Number |
Brand |
Price |
|
| GAT38105 |
Gates |
$44.21 |
|
|
|
|
1992-1996 Chevrolet Beretta Gates Accessory Belt Tensioner
GATES DRIVEALIGN AUTO TENSIONER -- 17 mm bearing bore inside diameter, 100 mm outside diameter, 28 mm width, 5-rib V-ribbed belt type; Steel material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; With lifetime Gates limited warranty.
| Part Number |
Brand |
Price |
|
| GAT38110 |
Gates |
$41.18 |
|
|
|
|
1991-1994 Chevrolet Beretta Gates Accessory Belt Tensioner
GATES DRIVEALIGN AUTO TENSIONER -- 17 mm bearing bore inside diameter, 82 mm outside diameter, 27 mm width, 5-rib V-ribbed belt type; Steel material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; With lifetime Gates limited warranty.
| Part Number |
Brand |
Price |
|
| GAT38146 |
Gates |
$36.91 |
|
|
|
|
|
1993 Chevrolet Beretta Gates Accessory Belt Tensioner
GATES DRIVEALIGN AUTO TENSIONER -- 17 mm bearing bore inside diameter, 90 mm outside diameter, 25.5 mm width, 6-rib V-ribbed belt type; Thermoplastic material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; With lifetime Gates limited warranty.
| Part Number |
Brand |
Price |
|
| GAT38105 |
Gates |
$44.21 |
|
|
|
|
1987-1991 Chevrolet Beretta Gates Accessory Belt Tensioner
GATES DRIVEALIGN AUTO TENSIONER -- 17 mm bearing bore inside diameter, 100 mm outside diameter, 28 mm width, 5-rib V-ribbed belt type; Steel material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; With lifetime Gates limited warranty.
| Part Number |
Brand |
Price |
|
| GAT38109 |
Gates |
$64.28 |
|
|
|
|
|
1987-1996 Chevrolet Beretta Dayco Accessory Belt Idler Pulley
DAYCO NO SLACK IDLER PULLEY -- 90 mm OD, 17 mm ID, 30 mm W, flat steel without flange; Constructed of specially formulated glass-filled polymers for high-strength, cooler running and maximum wear resistance; Use of state-of-the-art 3-D computer aided design and finite element analysis guarantees optimal design and maximum structural integrity; Engineered with smoother surfaces and tighter dimensional tolerances for lesser vibration extending the belt's life; Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance.
| Part Number |
Brand |
Price |
|
| DY89006 |
Dayco |
$24.64 |
|
|
|
|
1987-1993 Chevrolet Beretta Gates Accessory Belt Idler Pulley
GATES DRIVEALIGN IDLER PULLEY -- 76 mm outside diameter, 25 mm width, 6-grooves, 6-rib V-ribbed belt type; Thermoplastic material; Features an application specific design that meets OE requirements for constant tension, vibration resistance and proper alignment on serpentine belt engine accessory drivers; Its robust and high quality pulley materials withstand contaminants, while its superior bearings outperform OE idler pulleys; Guaranteed to last up to 3 times longer than competitive aftermarket tensioners.
| Part Number |
Brand |
Price |
|
| GAT38009 |
Gates |
$15.54 |
|
|
|
|
1987-1994 Chevrolet Beretta Gates Accessory Belt Idler Pulley
Gates
Gates is one of the world's leading manufacturers of drive belt components and offers the most complete line of OE specified drive belt products to the automotive aftermarket.
| Part Number |
Brand |
Price |
|
| W0133-1826638 |
Gates |
$35.95 |
|
|
|
|
1987-1996 Chevrolet Beretta Gates Accessory Belt Idler Pulley
GATES DriveAlign IDLER PULLEY -- A High Quality Idler Pulley, Bearing Bore I.D. 17mm, O.D. 100mm, Made Of Premium Materials For Longer Wear Life And Higher Load Capacity, Designed To Operate Under Severe Conditions And Provide Greater Reliability, Built With Premium Bearings And Seals That Can Operate At Higher Temperatures
| Part Number |
Brand |
Price |
|
| GAT38026 |
Gates |
$20.98 |
|
|
|
|
1987-1996 Chevrolet Beretta Gates Accessory Belt Idler Pulley
GATES DriveAlign IDLER PULLEY -- A High Quality Idler Pulley, Bearing Bore I.D. 17mm, O.D. 90mm, Made Of Premium Materials For Longer Wear Life And Higher Load Capacity, Designed To Operate Under Severe Conditions And Provide Greater Reliability, Built With Premium Bearings And Seals That Can Operate At Higher Temperatures
| Part Number |
Brand |
Price |
|
| GAT38007 |
Gates |
$14.91 |
|
|
|
|
|
1994 Chevrolet Beretta Gates Accessory Belt Idler Pulley
GATES DriveAlign IDLER PULLEY -- A High Quality Idler Pulley, Bearing Bore I.D. 17mm, O.D. 82mm, Made Of Premium Materials For Longer Wear Life And Higher Load Capacity, Designed To Operate Under Severe Conditions And Provide Greater Reliability, Built With Premium Bearings And Seals That Can Operate At Higher Temperatures
| Part Number |
Brand |
Price |
|
| GAT38011 |
Gates |
$30.19 |
|
|
|
|
|
1993 Chevrolet Beretta Gates Accessory Belt Idler Pulley
GATES DriveAlign IDLER PULLEY -- A High Quality Idler Pulley, Bearing Bore I.D. 17mm, O.D. 90mm, Made Of Premium Materials For Longer Wear Life And Higher Load Capacity, Designed To Operate Under Severe Conditions And Provide Greater Reliability, Built With Premium Bearings And Seals That Can Operate At Higher Temperatures
| Part Number |
Brand |
Price |
|
| GAT38007 |
Gates |
$14.91 |
|
|
|
|
|
1991-1993 Chevrolet Beretta Gates Accessory Belt Idler Pulley
GATES DriveAlign IDLER PULLEY -- A High Quality Idler Pulley, Bearing Bore I.D. 17mm, O.D. 82mm, Made Of Premium Materials For Longer Wear Life And Higher Load Capacity, Designed To Operate Under Severe Conditions And Provide Greater Reliability, Built With Premium Bearings And Seals That Can Operate At Higher Temperatures
| Part Number |
Brand |
Price |
|
| GAT38011 |
Gates |
$30.19 |
|
|
|
|
|
1987-1996 Chevrolet Beretta Covercraft Storage Bag
COVERCRAFT UV BAG -- A strong and durable storage of UV SunShield interior window covers.
| Part Number |
Brand |
Price |
|
| C59ZUBAGV3 |
Covercraft |
$5.21 |
|
|
|
|
1993-1994 Chevrolet Beretta Dorman Accessory Belt Tensioner
DORMAN AUTOMATIC BELT TENSIONER -- Serpentine Type; A high quality, direct fit OE replacement automatic belt tensioner; With lifetime Dorman limited warranty.
| Part Number |
Brand |
Price |
|
| RB419110 |
Dorman |
$33.42 |
|
|
|
|
|
1990-1992 Chevrolet Beretta Dorman Accessory Belt Tensioner
DORMAN AUTOMATIC BELT TENSIONER -- Serpentine Type; A high quality, direct fit OE replacement automatic belt tensioner; With lifetime Dorman limited warranty.
| Part Number |
Brand |
Price |
|
| RB419110 |
Dorman |
$33.42 |
|
|
|
|
1992-1996 Chevrolet Beretta Dorman Accessory Belt Tensioner
DORMAN AUTOMATIC BELT TENSIONER -- Serpentine Type; A high quality, direct fit OE replacement automatic belt tensioner; With lifetime Dorman limited warranty.
| Part Number |
Brand |
Price |
|
| RB419108 |
Dorman |
$41.73 |
|
|
|
|
1987-1996 Chevrolet Beretta Dorman Accessory Belt Tensioner
DORMAN AUTOMATIC BELT TENSIONER -- Serpentine Type; A high quality, direct fit OE replacement automatic belt tensioner; With lifetime Dorman limited warranty.
| Part Number |
Brand |
Price |
|
| RB419101 |
Dorman |
$34.99 |
|
|
|
|
1987-1991 Chevrolet Beretta Dorman Accessory Belt Tensioner
DORMAN AUTOMATIC BELT TENSIONER -- Serpentine Type; A high quality, direct fit OE replacement automatic belt tensioner; With lifetime Dorman limited warranty.
| Part Number |
Brand |
Price |
|
| RB419106 |
Dorman |
$49.42 |
|
|
|
|
1992-1996 Chevrolet Beretta AC Delco Accessory Belt Tensioner
AC DELCO DRIVE BELT TENSIONER ASSEMBLY, SOLD INDIVIDUALLY -- A high quality, OE replacement drive belt tensioner assembly; Replaces OE number 88909600; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38110 |
AC Delco |
$59.61 |
|
|
|
|
1987-1996 Chevrolet Beretta AC Delco Accessory Belt Tensioner
AC DELCO DRIVE BELT TENSIONER ASSEMBLY, SOLD INDIVIDUALLY -- A high quality, OE replacement drive belt tensioner assembly; Replaces OE number 88909595; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38105 |
AC Delco |
$63.29 |
|
|
|
|
1991-1994 Chevrolet Beretta AC Delco Accessory Belt Tensioner
AC DELCO DRIVE BELT TENSIONER ASSEMBLY, SOLD INDIVIDUALLY -- A high quality, OE replacement drive belt tensioner assembly; Replaces OE number 88920946; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38146 |
AC Delco |
$45.19 |
|
|
|
|
|
1993 Chevrolet Beretta AC Delco Accessory Belt Tensioner
AC DELCO DRIVE BELT TENSIONER ASSEMBLY, SOLD INDIVIDUALLY -- A high quality, OE replacement drive belt tensioner assembly; Replaces OE number 88909595; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38105 |
AC Delco |
$63.29 |
|
|
|
|
1987-1991 Chevrolet Beretta AC Delco Accessory Belt Tensioner
AC DELCO DRIVE BELT TENSIONER ASSEMBLY, STEEL -- 100 mm x 17 mm x 28 mm, smooth/backside; A high quality, direct fit OE replacement drive belt tensioner assembly; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38109 |
AC Delco |
$94.28 |
|
|
|
|
1987-1996 Chevrolet Beretta AC Delco Accessory Belt Idler Pulley
AC DELCO BELT IDLER PULLEY, THERMOPLASTIC -- 90 x 17 x 25.5 mm, smooth/backside pulley type; A high quality, OE replacement belt idler pulley; Replaces OE number 88909588; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38007 |
AC Delco |
$23.14 |
|
|
|
|
1987-1996 Chevrolet Beretta AC Delco Accessory Belt Idler Pulley
AC DELCO BELT IDLER PULLEY -- A high quality, OE replacement belt idler pulley; Replaces OE number 88996996; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38026 |
AC Delco |
$32.10 |
|
|
|
|
1991-1994 Chevrolet Beretta AC Delco Accessory Belt Idler Pulley
AC DELCO BELT IDLER PULLEY, STEEL -- 3.23 x 0.67 x 1.06 in.; A high quality, direct fit OE replacement belt idler pulley; Replaces OE number 88926777; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38011 |
AC Delco |
$38.28 |
|
|
|
|
1987-1993 Chevrolet Beretta AC Delco Accessory Belt Idler Pulley
AC DELCO BELT IDLER PULLEY, THERMOPLASTIC -- 76 x 17 x 25 mm, 6-groove,V-ribbed belt type; A high quality, OE replacement belt idler pulley; Replaces OE number 88909590; With 12-month or 12,000-mile AC Delco warranty.
| Part Number |
Brand |
Price |
|
| AC38009 |
AC Delco |
$22.18 |
|
|
|
|
1987-1996 Chevrolet Beretta Hayden Accessory Belt Tensioner
HAYDEN AUTOMATIC BELT TENSIONER, SOLD INDIVIDUALLY -- Smooth pulley type; OE quality for long life and easy replacement; Maintains constant tension on the belt to extend both belt and accessory drive bearing life.
| Part Number |
Brand |
Price |
|
| HY5895 |
Hayden |
$50.85 |
|
|
|
|
1987-1996 Chevrolet Beretta Logo Products Sun Visor Storage
LOGO PRODUCTS VISOR ORGANIZER, WITH CHEVROLET LOGO -- Made From Durable Canvas Material, Features Deep And Spacious Zippered Pocket For Storing Road Maps Or Mail And Smaller Zippered Pouch Ideal For Storing Receipts Or Grocery Coupons, Stores Garage Door Opener, Sunglasses, Pen/Pencil, Or Tire Gauge, Comes With Adjustable Velcro Straps That Won't Cover Vanity Mirror
| Part Number |
Brand |
Price |
|
| PLC6204 |
Logo Products |
$17.53 |
|
|
|
|
1987-1996 Chevrolet Beretta Logo Products Sun Visor Storage
LOGO PRODUCTS CHEVROLET CD VISOR ORGANIZER -- Made Of Durable Canvas Material, Features Deep And Spacious Zippered Pocket For Storing Road Maps Or Mail, Smaller Zippered Pouch Ideal For Storing Receipts Or Grocery Coupons And Adjustable Velcro Straps Won't Cover Vanity Mirror, Stores Up To 10 CDs
| Part Number |
Brand |
Price |
|
| PLC6304 |
Logo Products |
$19.26 |
|
|
|
|
1991-1994 Chevrolet Beretta Hayden Accessory Belt Idler Pulley
HAYDEN ACCESSORY BELT IDLER PULLEY -- 3.25 in. pulley diameter; Flat groove; A high quality, direct fit OE replacement accessory belt idler pulley; For 1.06 in. W serpentine type belts; With 1-year or 12,000-mile Hayden limited warranty.
| Part Number |
Brand |
Price |
|
| HY5012 |
Hayden |
$15.35 |
|
|
|
|
1987-1996 Chevrolet Beretta Custom Accessories Cigarette Lighter
CUSTOM ACCESSORIES POP OUT LIGHTER, CHROME -- 12V; Ashtray style; Illuminated; Designed to fit most applications.
| Part Number |
Brand |
Price |
|
| CUA10225 |
Custom Accessories |
$5.86 |
|
|
|
|
1993-1996 Chevrolet Beretta Blue Ox Hitch Accessory
BLUE OX STANDARD BASE PLATE KIT, STEEL -- With fixed 13-1/2 x 24 in. attachment tabs; Includes hardware and instructions; Made of durable steel; Keeps the weight placed on your suspension to a minimum; Designed with hidden reinforcements; Bolts securely to the chassis and spreads towing force equally without undue stress; Integrated into the individual bumper design of the towed vehicle; Requires trimming of air dam during installation; Not for use with adapter part number BX88152.
| Part Number |
Brand |
Price |
|
| BLXBX1614 |
Blue Ox |
$370.00 |
|
|
|
|
1987-1996 Chevrolet Beretta Logo Products CD Storage Case
LOGO PRODUCTS CHEVROLET RACING 22 CD STEEL CASE -- Licensed, Rugged CD Case With Felt-Line Interior That Protects Your Collection During Transit And Adds Personal Touch To The Interior Of The Vehicle, Features Locking Hinges That Prevents The CD Case From Accidentally Opening And Patented CD Sleeve Clip System
| Part Number |
Brand |
Price |
|
| PLC6804 |
Logo Products |
$21.91 |
|
|
