|
|
1987-1991 GMC R3500 KYB - KYB Gr-2/excel-g Shock Absorber and Strut Assembly
KYB GR-2/EXCEL-G SHOCK ABSORBER, SOLD INDIVIDUALLY -- Gas charged; Twin tube construction; Built with quality that matches or exceeds OE design and calibrated to compensate for worn suspensions, this standard replacement shock absorber restores handling and control while greatly improving ride comfort; With KYB's limited lifetime warranty.
| Part Number |
Brand |
Price |
 |
| KY344366 |
KYB |
$34.18 |
|
|
|
|
1987-1991 GMC R3500 KYB - KYB Gr-2/excel-g Shock Absorber and Strut Assembly
KYB GR-2/EXCEL-G SHOCK ABSORBER, SOLD INDIVIDUALLY -- Gas charged; Twin tube construction; Built with quality that matches or exceeds OE design and calibrated to compensate for worn suspensions, this standard replacement shock absorber restores handling and control while greatly improving ride comfort; With KYB's limited lifetime warranty.
| Part Number |
Brand |
Price |
 |
| KY344068 |
KYB |
$23.99 |
|
|
|
|
1987-1991 GMC R3500 Monroe - Monroe Gas-magnum Shock Absorber and Strut Assembly
MONROE GAS-MAGNUM SHOCK ABSORBER, TWIN-TUBE, YELLOW, SOLD INDIVIDUALLY
Experience firm control, greater stability, and ride comfort with Monroe Gas-Magnum shocks. Designed to fit just about any light truck on the road today, these dampers meet or exceed OE requirements and are built to last a long time, even under the demands of high mileage and severe use.
Specifications:- 0.63 in. piston rod diameter
- 1.38 in. piston diameter
- 2 in. reserve tube
- 14.63 in. extended length
- 9.88 in. compressed length
- 4.75 in. damper travel
Features:- Full displaced valving provides better valving range on compression and extension cycles
- Nitrogen gas charge reduces aeration and helps maintain tire to road contact
- Expanded reserve tube increases oil capacity and dissipates heat better
- Nitrocarburized piston rod lengthens service life
- Large bore provides lower operating temperatures
- Sintered iron piston enhances durability
- All weather fluid guarantees reduced friction and smooth rod reaction
- Special self-lubricating seal retains gas without excessive wear
| Part Number |
Brand |
Price |
 |
| TS34817 |
Monroe |
$40.93 |
|
|
|
|
1987-1991 GMC R3500 Monroe Shock Absorber and Strut Assembly
MONROE SHOCK ABSORBER, TWIN-TUBE, BLACK, SOLD INDIVIDUALLY
Monroe Gas Charged Shock Absorbers and Strut Assemblies offers the best of both worlds - control and comfort. These shocks and struts come with pressurized gas that helps prevent aeration and eventual shock fade. Monroe also coupled gas charging with larger piston bore design to add to the working capacity of lower sprng rate suspension system. The end result is shock absorber or a stru assembly that offers softer ride quality and better handling. Item Details:- Painted black
- Non-adjustable
| Part Number |
Brand |
Price |
 |
| TS20718 |
Monroe |
$14.53 |
|
|
|
|
1987-1991 GMC R3500 Monroe - Monroe Gas-magnum Shock Absorber and Strut Assembly
MONROE GAS-MAGNUM SHOCK ABSORBER, TWIN-TUBE, YELLOW, SOLD INDIVIDUALLY
Experience firm control, greater stability, and ride comfort with Monroe Gas-Magnum shocks. Designed to fit just about any light truck on the road today, these dampers meet or exceed OE requirements and are built to last a long time, even under the demands of high mileage and severe use.
Specifications:- 0.63 in. piston rod diameter
- 1.38 in. piston diameter
- 2 in. reserve tube
- 22.88 in. extended length
- 14.13 in. compressed length
- 8.75 in. damper travel
Features:- Full displaced valving provides better valving range on compression and extension cycles
- Nitrogen gas charge reduces aeration and helps maintain tire to road contact
- Expanded reserve tube increases oil capacity and dissipates heat better
- Nitrocarburized piston rod lengthens service life
- Large bore provides lower operating temperatures
- Sintered iron piston enhances durability
- All weather fluid guarantees reduced friction and smooth rod reaction
- Special self-lubricating seal retains gas without excessive wear
| Part Number |
Brand |
Price |
 |
| TS34960 |
Monroe |
$42.27 |
|
|
|
|
1988-1991 GMC R3500 K&N - K&N 63 Aircharger Cold Air Intake
K&N 63 SERIES AIRCHARGER COLD AIR INTAKE KIT
K&N's 63 Series Aircharger cold air intake kit is designed to replace your vehicle's restrictive factory air filter and air intake housing. It dramatically reduces intake restriction resulting in additional power and torque. Custom engineered and aerodynamically designed to drive more air into your engine. Its air filter is made of multiple interwoven layers of surgical cotton gauze infused or charged with oil for outstanding filtration and airflow.
Specifications- Cotton gauze filter material
- Oiled filter element
- Without heat shield
- Mounting hardware included
- Chrome tube finish
- Plastic tube material
Features- Provides power up to 6.72 h.p. at 4107 rpm
- Up to 99% filtration efficiency
- Washable and reusable air filter
- Can go up to 100,000 miles between cleanings depending on driving conditions
Notes- Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
| Part Number |
Brand |
Price |
 |
| K336310071 |
K&N |
$148.79 |
|
|
|
|
1987-1991 GMC R3500 Gabriel - Gabriel Guardian Shock Absorber and Strut Assembly
GABRIEL GUARDIAN SHOCK ABSORBER, TWIN-TUBE, RED, SOLD INDIVIDUALLY
Restore the handling and stability of your vehicle with this high quality, OE replacement Gabriel Guardian Shock Absorbers and Strut Assemblies. These dampers are created using high technology aftermarket engineering that delivers original equipment performance. That is, performance without the price.
Specifications:- 23.23 in. extended length
- 13.87 in. collapsed length
- 9.36 in. damper travel
- Loop upper mount style
- Loop lower mount style
Features:- Nitrogen gas-charged for consistent control and superior response
- Offers high quality comfort and performance at an economical price
- Engineered to meet or exceed OE specifications
| Part Number |
Brand |
Price |
 |
| GAB81174 |
Gabriel |
$19.79 |
|
|
|
|
1987-1991 GMC R3500 Gabriel - Gabriel Ultra Shock Absorber and Strut Assembly
GABRIEL ULTRA SHOCK ABSORBER, TWIN-TUBE, BLACK, SOLD INDIVIDUALLY
Install Gabriel Ultra Shock Absorbers in each corner of your vehicle and experience impressive and reassuring stability. When it comes to gas shock system, these dampers are the ultimate. The technology used from seal to piston to valving all contribute to outstanding damping performance.
Specifications:- 14.98 in. extended length
- 9.95 in. collapsed length
- 5.03 in. damper travel
- Loop with stud/cantilever pin upper mount style
- Loop lower mount style
Features:- G-Force Piston made from bonded iron for durability and longer life
- Leak-proof piston seal that eliminates oil bypass for maximum shock effectiveness and performance
- Nitrogen gas charged for consistent control and superior response
- Precision engineered with Gabriel's G-Force Technology for maximum safety and performance
- StableSteer Valving that provides consistent response
| Part Number |
Brand |
Price |
 |
| GABG63355 |
Gabriel |
$42.49 |
|
|
|
|
1987-1991 GMC R3500 Gabriel - Gabriel Pro Guard Shock Absorber and Strut Assembly
GABRIEL PRO GUARD SHOCK ABSORBER, TWIN-TUBE, BLACK, SOLD INDIVIDUALLY
Replace your damper with the truck shock that provides a passenger car ride - Gabriel ProGuard Shock Absorbers. These dampers, built to top OE performance, are engineered for comfort and control. As such, Pro Guard Shock Absorbers are guaranteed to lend your truck the comfort and control characteristics of a passenger car.
Specifications:- 14.73 in. extended length
- 9.62 in. collapsed length
- 5.11 in. damper travel
- Loop with stud/cantilever pin upper mount style
- Loop lower mount style
Features:- Larger-than-standard diameter piston for better-than-OE response and performance
- Increased oil capacity that dissipates heat to maintain damping ability for improved control
| Part Number |
Brand |
Price |
 |
| GAB61525 |
Gabriel |
$31.49 |
|
|
|
|
1987-1991 GMC R3500 Gabriel - Gabriel Ultra Shock Absorber and Strut Assembly
GABRIEL ULTRA TRUCK SHOCK ABSORBER, SOLD INDIVIDUALLY -- 23.26 in. extended length; 14.23 in. collapsed length; Loop upper and lower mounts; Precision engineered with Gabriel's G-Force Technology for maximum safety and performance; With Gabriel Ultra installed in each corner of your vehicle, you will experience impressive and reassuring stability due to the StableSteer Valving that gives it consistent response; Other features include the G-Force Piston that is made of bonded iron construction for durability and longer life, a nitrogen gas charge that increases performance and control, and a leak-proof piston seal that eliminates oil bypass for maximum shock effectiveness and performance.
| Part Number |
Brand |
Price |
 |
| GABG63366 |
Gabriel |
$45.95 |
|
|
|
|
1987-1991 GMC R3500 Gabriel - Gabriel Guardian Shock Absorber and Strut Assembly
GABRIEL GUARDIAN SHOCK ABSORBER, TWIN-TUBE, RED, SOLD INDIVIDUALLY
Restore the handling and stability of your vehicle with this high quality, OE replacement Gabriel Guardian Shock Absorbers and Strut Assemblies. These dampers are created using high technology aftermarket engineering that delivers original equipment performance. That is, performance without the price.
Specifications:- 14.73 in. extended length
- 9.62 in. collapsed length
- 5.11 in. damper travel
- Loop with stud/cantilever pin upper mount style
- Loop lower mount style
Features:- Nitrogen gas-charged for consistent control and superior response
- Offers high quality comfort and performance at an economical price
- Engineered to meet or exceed OE specifications
| Part Number |
Brand |
Price |
 |
| GAB81039 |
Gabriel |
$16.97 |
|
|
|
|
1987-1991 GMC R3500 Gabriel - Gabriel Pro Guard Shock Absorber and Strut Assembly
GABRIEL PRO GUARD SHOCK ABSORBER, TWIN-TUBE, BLACK, SOLD INDIVIDUALLY
Replace your damper with the truck shock that provides a passenger car ride - Gabriel ProGuard Shock Absorbers. These dampers, built to top OE performance, are engineered for comfort and control. As such, Pro Guard Shock Absorbers are guaranteed to lend your truck the comfort and control characteristics of a passenger car.
Specifications:- 23.28 in. extended length
- 13.92 in. collapsed length
- 9.36 in. damper travel
- Loop upper mount style
- Loop lower mount style
Features:- Larger-than-standard diameter piston for better-than-OE response and performance
- Increased oil capacity that dissipates heat to maintain damping ability for improved control
| Part Number |
Brand |
Price |
 |
| GAB61649 |
Gabriel |
$29.84 |
|
|
|
|
1987-1991 GMC R3500 Rancho - Rancho Rs5000 Shock Absorber and Strut Assembly
RANCHO RS5000 SHOCK ABSORBER, TWIN-TUBE, WHITE, SOLD INDIVIDUALLY
Experience exceptional performance and comfort with the rebuildable Rancho RS5000 Shock absorbers. These light truck shocks exhibit an expanded tube design and valving technology. The expanded tube design allows for cooler operating temperatures. While the 10-stage velocity sensitive valving allows the shock to self-adjust as speed and road conditions change. The combination of these features deliver the comfortable highway ride and superb off-road performance you need.
Specifications:- 22.25 in. extended length
- 14 in. collapsed length
- 8.25 in. damper travel
- Loop upper mount style
- Loop lower mount style
Features:- 0.63 in. diameter chrome piston rod
- Ten-stage velocity sensitive valving for rugged performance on and off the road
- Expanded twin-tube design provides more fluid capacity for lower operating temperatures
- Internal rebound bumper and red dust boot to protect the piston rod from contaminants

| Part Number |
Brand |
Price |
 |
| R38RS5118 |
Rancho |
$50.99 |
|
|
|
|
1987-1991 GMC R3500 Rancho - Rancho Rs5000 Shock Absorber and Strut Assembly
RANCHO RS5000 SHOCK ABSORBER, TWIN-TUBE, WHITE, SOLD INDIVIDUALLY
Experience exceptional performance and comfort with the rebuildable Rancho RS5000 Shock absorbers. These light truck shocks exhibit an expanded tube design and valving technology. The expanded tube design allows for cooler operating temperatures. While the 10-stage velocity sensitive valving allows the shock to self-adjust as speed and road conditions change. The combination of these features deliver the comfortable highway ride and superb off-road performance you need.
Specifications:- 22.25 in. extended length
- 14 in. collapsed length
- 8.25 in. damper travel
- Loop upper mount style
- Loop lower mount style
Features:- 0.63 in. diameter chrome piston rod
- Ten-stage velocity sensitive valving for rugged performance on and off the road
- Expanded twin-tube design provides more fluid capacity for lower operating temperatures
- Internal rebound bumper and red dust boot to protect the piston rod from contaminants

| Part Number |
Brand |
Price |
 |
| R38RS5118 |
Rancho |
$50.99 |
|
|
|
|
1987-1991 GMC R3500 Rancho - Rancho Rs9000xl Shock Absorber and Strut Assembly
RANCHO RS9000XL SHOCK ABSORBER, TRIPLE-TUBE, SILVER, SOLD INDIVIDUALLY
Enjoy excellent damping performance with Rancho RS9000XL Shock Absorbers. These shocks, with their 9-position adjustability, can be tuned from soft for street, to firm for off-road driving. Manually or remotely, you can perfectly dial your ride.
Specifications:- 22.13 in. extended length
- 14.25 in. collapsed length
- 7.88 in. damper travel
- Loop upper mount style
- Loop lower mount style
Features:- Polyurethane bushings that enhance shock performance and durability
- 9-position adjustability that ensures exceptional performance under a full range of load and temperature conditions
- Allows both manual adjustment and in-cab remote adjustments via MyRide Wireless tuning technology

| Part Number |
Brand |
Price |
 |
| R38RS999118 |
Rancho |
$110.99 |
|
|
|
|
1987-1991 GMC R3500 Rancho - Rancho Rs9000xl Shock Absorber and Strut Assembly
RANCHO RS9000XL SHOCK ABSORBER, TRIPLE-TUBE, SILVER, SOLD INDIVIDUALLY
Enjoy excellent damping performance with Rancho RS9000XL Shock Absorbers. These shocks, with their 9-position adjustability, can be tuned from soft for street, to firm for off-road driving. Manually or remotely, you can perfectly dial your ride.
Specifications:- 22.13 in. extended length
- 14.25 in. collapsed length
- 7.88 in. damper travel
- Loop upper mount style
- Loop lower mount style
Features:- Polyurethane bushings that enhance shock performance and durability
- 9-position adjustability that ensures exceptional performance under a full range of load and temperature conditions
- Allows both manual adjustment and in-cab remote adjustments via MyRide Wireless tuning technology

| Part Number |
Brand |
Price |
 |
| R38RS999118 |
Rancho |
$110.99 |
|
|
|
|
1987-1991 GMC R3500 Rancho - Rancho Rs5000 Shock Absorber and Strut Assembly
RANCHO RS5000 SHOCK ABSORBER, TWIN-TUBE, WHITE, SOLD INDIVIDUALLY
Experience exceptional performance and comfort with the rebuildable Rancho RS5000 Shock absorbers. These light truck shocks exhibit an expanded tube design and valving technology. The expanded tube design allows for cooler operating temperatures. While the 10-stage velocity sensitive valving allows the shock to self-adjust as speed and road conditions change. The combination of these features deliver the comfortable highway ride and superb off-road performance you need.
Specifications:- 14 in. extended length
- 9.75 in. collapsed length
- 4.25 in. damper travel
- Loop upper mount style
- Loop lower mount style
Features:- 0.63 in. diameter chrome piston rod
- Ten-stage velocity sensitive valving for rugged performance on and off the road
- Expanded twin-tube design provides more fluid capacity for lower operating temperatures
- Internal rebound bumper and red dust boot to protect the piston rod from contaminants

| Part Number |
Brand |
Price |
 |
| R38RS5120 |
Rancho |
$50.99 |
|
|
|
|
1987-1991 GMC R3500 Rancho - Rancho Rs5000 Shock Absorber and Strut Assembly
RANCHO RS5000 SHOCK ABSORBER, TWIN-TUBE, WHITE, SOLD INDIVIDUALLY
Experience exceptional performance and comfort with the rebuildable Rancho RS5000 Shock absorbers. These light truck shocks exhibit an expanded tube design and valving technology. The expanded tube design allows for cooler operating temperatures. While the 10-stage velocity sensitive valving allows the shock to self-adjust as speed and road conditions change. The combination of these features deliver the comfortable highway ride and superb off-road performance you need.
Specifications:- 14 in. extended length
- 9.75 in. collapsed length
- 4.25 in. damper travel
- Loop upper mount style
- Loop lower mount style
Features:- 0.63 in. diameter chrome piston rod
- Ten-stage velocity sensitive valving for rugged performance on and off the road
- Expanded twin-tube design provides more fluid capacity for lower operating temperatures
- Internal rebound bumper and red dust boot to protect the piston rod from contaminants

| Part Number |
Brand |
Price |
 |
| R38RS5120 |
Rancho |
$50.99 |
|
|
|
|
1987-1989 GMC R3500 Rancho - Rancho Rs5000 Shock Absorber and Strut Assembly
RANCHO RS5000 SHOCK ABSORBER, TWIN-TUBE, WHITE, SOLD INDIVIDUALLY
Experience exceptional performance and comfort with the rebuildable Rancho RS5000 Shock absorbers. These light truck shocks exhibit an expanded tube design and valving technology. The expanded tube design allows for cooler operating temperatures. While the 10-stage velocity sensitive valving allows the shock to self-adjust as speed and road conditions change. The combination of these features deliver the comfortable highway ride and superb off-road performance you need.
Specifications:- 26.25 in. extended length
- 15.88 in. collapsed length
- 10.37 in. damper travel
- Loop with bar/cross pin upper mount style
- Loop lower mount style
Features:- 0.63 in. diameter chrome piston rod
- Ten-stage velocity sensitive valving for rugged performance on and off the road
- Expanded twin-tube design provides more fluid capacity for lower operating temperatures
- Internal rebound bumper and red dust boot to protect the piston rod from contaminants

| Part Number |
Brand |
Price |
 |
| R38RS5190 |
Rancho |
$50.99 |
|
|
|
|
1987-1991 GMC R3500 Rancho - Rancho Rs9000xl Shock Absorber and Strut Assembly
RANCHO RS9000XL SHOCK ABSORBER, TRIPLE-TUBE, SILVER, SOLD INDIVIDUALLY
Enjoy excellent damping performance with Rancho RS9000XL Shock Absorbers. These shocks, with their 9-position adjustability, can be tuned from soft for street, to firm for off-road driving. Manually or remotely, you can perfectly dial your ride.
Specifications:- 13.5 in. extended length
- 9.75 in. collapsed length
- 3.75 in. damper travel
- Loop upper mount style
- Loop lower mount style
Features:- Polyurethane bushings that enhance shock performance and durability
- 9-position adjustability that ensures exceptional performance under a full range of load and temperature conditions
- Allows both manual adjustment and in-cab remote adjustments via MyRide Wireless tuning technology

| Part Number |
Brand |
Price |
 |
| R38RS999120 |
Rancho |
$110.99 |
|
|
|
|
1987-1991 GMC R3500 Rancho - Rancho Rs9000xl Shock Absorber and Strut Assembly
RANCHO RS9000XL SHOCK ABSORBER, TRIPLE-TUBE, SILVER, SOLD INDIVIDUALLY
Enjoy excellent damping performance with Rancho RS9000XL Shock Absorbers. These shocks, with their 9-position adjustability, can be tuned from soft for street, to firm for off-road driving. Manually or remotely, you can perfectly dial your ride.
Specifications:- 13.5 in. extended length
- 9.75 in. collapsed length
- 3.75 in. damper travel
- Loop upper mount style
- Loop lower mount style
Features:- Polyurethane bushings that enhance shock performance and durability
- 9-position adjustability that ensures exceptional performance under a full range of load and temperature conditions
- Allows both manual adjustment and in-cab remote adjustments via MyRide Wireless tuning technology

| Part Number |
Brand |
Price |
 |
| R38RS999120 |
Rancho |
$110.99 |
|
|
|
|
1987-1989 GMC R3500 Rancho - Rancho Rs5000 Shock Absorber and Strut Assembly
RANCHO RS5000 SHOCK ABSORBER, SOLD INDIVIDUALLY -- 13.75 in. extended length, 9.5 in. collapsed length, 0.625 in. diameter chrome piston rod, 1.325 in. diameter piston; Stem upper mount and crosspin lower mount; Includes rubber bushings and boot; This twin tube gas shock absorber features ten-stage velocity sensitive valving for rugged performance on and off the road..

| Part Number |
Brand |
Price |
 |
| R38RS5166 |
Rancho |
$50.99 |
|
|
|
|
1987-1989 GMC R3500 Rancho - Rancho Rs9000xl Shock Absorber and Strut Assembly
RANCHO RS9000XL SHOCK ABSORBER, TRIPLE-TUBE, SILVER, SOLD INDIVIDUALLY
Enjoy excellent damping performance with Rancho RS9000XL Shock Absorbers. These shocks, with their 9-position adjustability, can be tuned from soft for street, to firm for off-road driving. Manually or remotely, you can perfectly dial your ride.
Specifications:- 26.25 in. extended length
- 16.38 in. collapsed length
- 9.87 in. damper travel
- Loop with bar/cross pin upper mount style
- Loop lower mount style
Features:- Polyurethane bushings that enhance shock performance and durability
- 9-position adjustability that ensures exceptional performance under a full range of load and temperature conditions
- Allows both manual adjustment and in-cab remote adjustments via MyRide Wireless tuning technology

| Part Number |
Brand |
Price |
 |
| R38RS999190 |
Rancho |
$110.99 |
|
|
|
|
1987-1989 GMC R3500 Rancho - Rancho Rs9000xl Shock Absorber and Strut Assembly
RANCHO RS9000XL SHOCK ABSORBER, LIQUID METALLIC FINISH, SOLD INDIVIDUALLY -- 13.75 in. extended length, 9.75 in. collapsed length, stem upper mount, crosspin lower mount; Includes boot and polyurethane bushings; This twin tube gas shock absorber has 9-position adjustability and allows for both manual adjustment and in-cab remote adjustments via MyRide Wireless Tuning technology..

| Part Number |
Brand |
Price |
 |
| R38RS999166 |
Rancho |
$110.99 |
|
|
|
|
1988-1991 GMC R3500 Belltech - Belltech Nitro Drop 2 Shock Absorber and Strut Assembly
BELLTECH NITRO DROP 2 SHOCK ABSORBER, TWIN-TUBE, BLACK, SOLD INDIVIDUALLY
The redesigned Nitro Drop 2 shock absorber proves to be the perfect suspension upgrade with its state of the art construction and economical price. Its cavitation-free technology allows optimum performance even during spirited driving.
Features:- Oversized construction provides additional damping control
- Fully covered and durable metal dust boot ensures a cleaner operating environment
- OEM quality rubber mounts come with vulcanized sleeves for maximum durability and stiffness
- Cavitation-free valve train keeps air out to maintain shock effectiveness
| Part Number |
Brand |
Price |
 |
| B268500 |
Belltech |
$41.20 |
|
|
|
|
1988-1989 GMC R3500 Silla A/C Condenser
SILLA A/C CONDENSER -- A Top Of The Line Replacement Condenser That Is Engineered And Manufactured Under The Highest Quality Standards, Features 18-19 Copper Fins Per Inch That Provide Faster Results And More Efficient Cooling Compared To Other Products Available In The Market, Ensures A Cool Temperature For A More Comfortable Riding Experience, Painted With A Water-Based Semi-Gloss Enamel Which Is Highly Resistant To Peeling, Blocks And Fittings Are Milled By An Aircraft Parts Manufacturer To Tolerances Of %XA41/50,000 For Long-Lasting Durability, Metal Brackets Are Jet Coated With A Thick Layer Of Zinc For Superior Paint Adhesion, 100% Tested With High-Pressure Nitrogen For Unmatched Quality
| Part Number |
Brand |
Price |
 |
| SILLAC6421 |
Silla |
$55.56 |
|
|
|
|
1996-2004 GMC Sonoma Kool Vue - Kool VUE 1000 Cold Air Intake
KOOL VUE 1000 SERIES HIGH-FLOW PERFORMANCE COLD AIR INTAKE SYSTEM
This KOOL VUE high-flow performance cold air intake system features polished intake tubing that is made from lightweight T-6061 aluminum and oiled cotton gauze air filter. The exact cold air intake replacement you've been looking for, all necessary hardware included for easy installation!
Features and Benefits:- Up to 99 percent filtration efficiency
- Provides additional power up to 11.3 h.p. at 5500 RPM and 10.9 lb.-ft. of torque at 5250 RPM
- Provides more power throughout the vehicle's full RPM range using mandrel-bent piping and reusable high flowing air filter
Parts Included:- Heat shield
- Intake tube
- Premium red air filter
- All necessary hardware for easy installation
Notes: Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states.
| Part Number |
Brand |
Price |
 |
| KV4401061K |
Kool Vue |
$65.40 |
|
|
|
|
1996-2001 GMC Jimmy Kool Vue - Kool VUE 1000 Cold Air Intake
KOOL VUE 1000 SERIES HIGH-FLOW PERFORMANCE COLD AIR INTAKE SYSTEM
This KOOL VUE high-flow performance cold air intake system features polished intake tubing that is made from lightweight T-6061 aluminum and oiled cotton gauze air filter. The exact cold air intake replacement you've been looking for, all necessary hardware included for easy installation!
Features and Benefits:- Up to 99 percent filtration efficiency
- Provides additional power up to 11.3 h.p. at 5500 RPM and 10.9 lb.-ft. of torque at 5250 RPM
- Provides more power throughout the vehicle's full RPM range using mandrel-bent piping and reusable high flowing air filter
Parts Included:- Heat shield
- Intake tube
- Premium red air filter
- All necessary hardware for easy installation
Notes: Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states.
| Part Number |
Brand |
Price |
 |
| KV4401061K |
Kool Vue |
$65.40 |
|
|
|
|
2001-2004 GMC Sierra 3500 Kool Vue - Kool VUE 1000 Cold Air Intake
KOOL VUE 1000 SERIES HIGH-FLOW PERFORMANCE COLD AIR INTAKE SYSTEM
This KOOL VUE high-flow performance cold air intake system features polished intake tubing that is made from lightweight T-6061 aluminum and oiled cotton gauze air filter. The exact cold air intake replacement you've been looking for, all necessary hardware included for easy installation!
Features and Benefits:- Up to 99 percent filtration efficiency
- Provides additional power up to 8.8 h.p. at 5100 RPM
- Provides more power throughout the vehicle's full RPM range using mandrel-bent piping and reusable high flowing air filter
Parts Included:- Heat shield
- Intake tube
- Premium red air filter
- All necessary hardware for easy installation
Notes: Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states.
| Part Number |
Brand |
Price |
 |
| KV4401101K |
Kool Vue |
$79.65 |
|
|
|
|
2001-2004 GMC Sierra 2500 HD Kool Vue - Kool VUE 1000 Cold Air Intake
KOOL VUE 1000 SERIES HIGH-FLOW PERFORMANCE COLD AIR INTAKE SYSTEM
This KOOL VUE high-flow performance cold air intake system features polished intake tubing that is made from lightweight T-6061 aluminum and oiled cotton gauze air filter. The exact cold air intake replacement you've been looking for, all necessary hardware included for easy installation!
Features and Benefits:- Up to 99 percent filtration efficiency
- Provides additional power up to 8.8 h.p. at 5100 RPM
- Provides more power throughout the vehicle's full RPM range using mandrel-bent piping and reusable high flowing air filter
Parts Included:- Heat shield
- Intake tube
- Premium red air filter
- All necessary hardware for easy installation
Notes: Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states.
| Part Number |
Brand |
Price |
 |
| KV4401101K |
Kool Vue |
$79.65 |
|
|
|
|
2001-2006 GMC Yukon Kool Vue - Kool VUE 1000 Cold Air Intake
KOOL VUE 1000 SERIES HIGH-FLOW PERFORMANCE COLD AIR INTAKE SYSTEM
This KOOL VUE high-flow performance cold air intake system features polished intake tubing that is made from lightweight T-6061 aluminum and oiled cotton gauze air filter. The exact cold air intake replacement you've been looking for, all necessary hardware included for easy installation!
Features and Benefits:- Up to 99 percent filtration efficiency
- Provides additional power up to 6.8 h.p. at 5000 RPM and 7.1 lb.-ft. of torque at 5000 RPM
- Provides more power throughout the vehicle's full RPM range using mandrel-bent piping and reusable high flowing air filter
Parts Included:- Heat shield
- Intake tube
- Premium red air filter
- All necessary hardware for easy installation
Notes: Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states.
| Part Number |
Brand |
Price |
 |
| KV4401051K |
Kool Vue |
$149.28 |
|
|
|
|
2001-2006 GMC Sierra 3500 Kool Vue - Kool VUE 1000 Cold Air Intake
KOOL VUE 1000 SERIES HIGH-FLOW PERFORMANCE COLD AIR INTAKE SYSTEM
This KOOL VUE high-flow performance cold air intake system features polished intake tubing that is made from lightweight T-6061 aluminum and oiled cotton gauze air filter. The exact cold air intake replacement you've been looking for, all necessary hardware included for easy installation!
Features and Benefits:- Up to 99 percent filtration efficiency
- Provides additional power up to 6.8 h.p. at 5000 RPM and 7.1 lb.-ft. of torque at 5000 RPM
- Provides more power throughout the vehicle's full RPM range using mandrel-bent piping and reusable high flowing air filter
Parts Included:- Heat shield
- Intake tube
- Premium red air filter
- All necessary hardware for easy installation
Notes: Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states.
| Part Number |
Brand |
Price |
 |
| KV4401051K |
Kool Vue |
$149.28 |
|
|
|
|
1999-2006 GMC Sierra 1500 Kool Vue - Kool VUE 1000 Cold Air Intake
KOOL VUE 1000 SERIES HIGH-FLOW PERFORMANCE COLD AIR INTAKE SYSTEM
This KOOL VUE high-flow performance cold air intake system features polished intake tubing that is made from lightweight T-6061 aluminum and oiled cotton gauze air filter. The exact cold air intake replacement you've been looking for, all necessary hardware included for easy installation!
Features and Benefits:- Up to 99 percent filtration efficiency
- Provides additional power up to 6.8 h.p. at 5000 RPM and 7.1 lb.-ft. of torque at 5000 RPM
- Provides more power throughout the vehicle's full RPM range using mandrel-bent piping and reusable high flowing air filter
Parts Included:- Heat shield
- Intake tube
- Premium red air filter
- All necessary hardware for easy installation
Notes: Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states.
| Part Number |
Brand |
Price |
 |
| KV4401051K |
Kool Vue |
$149.28 |
|
|
|
|
1999-2004 GMC Sierra 2500 Kool Vue - Kool VUE 1000 Cold Air Intake
KOOL VUE 1000 SERIES HIGH-FLOW PERFORMANCE COLD AIR INTAKE SYSTEM
This KOOL VUE high-flow performance cold air intake system features polished intake tubing that is made from lightweight T-6061 aluminum and oiled cotton gauze air filter. The exact cold air intake replacement you've been looking for, all necessary hardware included for easy installation!
Features and Benefits:- Up to 99 percent filtration efficiency
- Provides additional power up to 6.8 h.p. at 5000 RPM and 7.1 lb.-ft. of torque at 5000 RPM
- Provides more power throughout the vehicle's full RPM range using mandrel-bent piping and reusable high flowing air filter
Parts Included:- Heat shield
- Intake tube
- Premium red air filter
- All necessary hardware for easy installation
Notes: Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states.
| Part Number |
Brand |
Price |
 |
| KV4401051K |
Kool Vue |
$149.28 |
|
|
|
|
1988-1991 GMC R3500 Airaid - Airaid Classic Cold Air Intake
AIRAID CLASSIC INTAKE SYSTEM
Airaid's Classic intake system is designed to add a new spin to vehicles with limited air flow to the original filter location. Its high flow air filter delivers exceptionally high filtration and its mandrel-bent powdercoated stainless steel intake tube moves the air inlet to a better location optimizing air flow at the drop of the throttle.
Specifications- Cotton gauze filter material
- Oiled filter element
- Without heat shield
- Silver tube finish
- Stainless steel tube material
Features- Provides power up to 12-18 h.p.
- Up to 820 CFM
- Up to 100% filtration efficiency
- Mandrel-bent tubing
- Washable and reusable air filter
- Made in U.S.A.
Notes- Product legal for sale in California under Executive Order (EO) number D-609-2. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.
| Part Number |
Brand |
Price |
 |
| A86200104 |
Airaid |
$192.02 |
|
|
|
|
1988-1991 GMC R3500 Airaid - Airaid Classic Cold Air Intake
AIRAID CLASSIC INTAKE SYSTEM -- Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states; 99 percent filtration efficiency rate; Includes air filter, polished intake tube and all the parts necessary for easy installation; Adds a new spin to vehicles with limited air flow to the original filter location; Features Synthamax air filter with 360-degree conical style and is made of two distinct layers of specifically designed synthetic materials for exceptionally high filtration; Dry element; Washable and reusable; Its mandrel-bent powdercoated stainless steel intake tube moves the air inlet to a better location optimizing air flow at the drop of the throttle; Made in USA.
| Part Number |
Brand |
Price |
 |
| A86201104 |
Airaid |
$223.90 |
|
|
|
|
1987 GMC R3500 Skyjacker - Skyjacker Nitro 8000 Shock Absorber and Strut Assembly
SKYJACKER NITRO 8000 SHOCK ABSORBER, TWIN-TUBE, WHITE, SOLD INDIVIDUALLY
Be in control of the road ahead with Skyjacker Nitro 8000 Shock Absorbers. The technological innovations of these long lasting shocks allow them to respond to on- and off-road conditions instantly. Do moderate or extreme off-roading at slow or fast speeds, and the high nitrogen gas charge and true velocity sensitive valving of these shocks will deliver better handling, improved stability, and maximum comfort all the same.
Specifications:- 27.07 in. extended length
- 15.94 in. collapsed length
- 11.13 in. damper travel
Features:- 150 psi nitrogen gas pressure helps facilitate high damping performance
- Multistage velocity sensitive valving provides faster response
- Drawn over mandrel tubing reduces internal wear for longer product life
- Bonded iron piston and chromed piston rod with micro pores for durability
- Polyurethane bushings and boot for protection from dirt and moisture build-up
- Leak proof seal prevents hydraulic fluid from passing around piston head for a consistent and reliable ride
| Part Number |
Brand |
Price |
 |
| S97N8083 |
Skyjacker |
$44.38 |
|
|
|
|
1987 GMC R3500 Skyjacker - Skyjacker Nitro 8000 Shock Absorber and Strut Assembly
SKYJACKER NITRO 8000 SHOCK ABSORBER, TWIN-TUBE, WHITE, SOLD INDIVIDUALLY
Be in control of the road ahead with Skyjacker Nitro 8000 Shock Absorbers. The technological innovations of these long lasting shocks allow them to respond to on- and off-road conditions instantly. Do moderate or extreme off-roading at slow or fast speeds, and the high nitrogen gas charge and true velocity sensitive valving of these shocks will deliver better handling, improved stability, and maximum comfort all the same.
Specifications:- 19.07 in. extended length
- 12.07 in. collapsed length
- 7 in. damper travel
- Loop with stud/cantilever pin upper mount style
- Loop lower mount style
Features:- 150 psi nitrogen gas pressure helps facilitate high damping performance
- Multistage velocity sensitive valving provides faster response
- Drawn over mandrel tubing reduces internal wear for longer product life
- Bonded iron piston and chromed piston rod with micro pores for durability
- Polyurethane bushings and boot for protection from dirt and moisture build-up
- Leak proof seal prevents hydraulic fluid from passing around piston head for a consistent and reliable ride
| Part Number |
Brand |
Price |
 |
| S97N8011 |
Skyjacker |
$44.38 |
|
|
|
|
1987 GMC R3500 Skyjacker - Skyjacker Hydro 7000 Shock Absorber and Strut Assembly
SKYJACKER HYDRO 7000 SHOCK ABSORBER, TWIN-TUBE, WHITE, SOLD INDIVIDUALLY
Be in control of the road ahead with Skyjacker Hydro 7000 Shock Absorbers. The technological innovations of these long lasting shocks allow them to respond to on- and off-road conditions instantly. Do mild or moderate off-roading at slow or fast speeds, and the consistent hydraulic action and true velocity sensitive valving of these shocks will deliver better handling, improved stability, and maximum comfort all the same.
Specifications:- 27.07 in. extended length
- 15.94 in. collapsed length
- 11.13 in. damper travel
- Loop with bar/cross pin upper mount style
- Loop lower mount style
Features:- Multistage velocity sensitive valving provides faster response
- Drawn over mandrel tubing reduces internal wear for longer product life
- Bonded iron piston and chromed piston rod with micro pores for durability
- Polyurethane bushings and boot for protection from dirt and moisture build-up
- Leak proof seal prevents hydraulic fluid from passing around piston head for a consistent and reliable ride
| Part Number |
Brand |
Price |
 |
| S97H7083 |
Skyjacker |
$37.30 |
|
|
|
|
1987 GMC R3500 Skyjacker - Skyjacker Hydro 7000 Shock Absorber and Strut Assembly
SKYJACKER HYDRO 7000 SHOCK ABSORBER, TWIN-TUBE, WHITE, SOLD INDIVIDUALLY
Be in control of the road ahead with Skyjacker Hydro 7000 Shock Absorbers. The technological innovations of these long lasting shocks allow them to respond to on- and off-road conditions instantly. Do mild or moderate off-roading at slow or fast speeds, and the consistent hydraulic action and true velocity sensitive valving of these shocks will deliver better handling, improved stability, and maximum comfort all the same.
Specifications:- 19.07 in. extended length
- 12.07 in. collapsed length
- 7 in. damper travel
- Loop with stud/cantilever pin upper mount style
- Loop lower mount style
Features:- Multistage velocity sensitive valving provides faster response
- Drawn over mandrel tubing reduces internal wear for longer product life
- Bonded iron piston and chromed piston rod with micro pores for durability
- Polyurethane bushings and boot for protection from dirt and moisture build-up
- Leak proof seal prevents hydraulic fluid from passing around piston head for a consistent and reliable ride
| Part Number |
Brand |
Price |
 |
| S97H7011 |
Skyjacker |
$37.30 |
|
|
|
|
1988-1991 GMC R3500 AEM Air - AEM Air Brute Force Cold Air Intake
AEM BRUTE FORCE AIR INDUCTION SYSTEM
AEM's Brute Force Air Induction System is dyno-tuned to produce maximum horsepower and torque by strategically locating the air filter in the coolest and safest section of the engine compartment. It features dry flow synthetic air filter that is proven to be highly efficient in fine dust testing and filtering dirt as small as one micron. Its mandrel-bent inlet pipe is constructed out of light but durable T-6063 aluminum with reinforced TIG-welded brackets and fittings for maximum flow and added durability.
Specifications- Synthetic filter material
- Dry filter element
- With heat shield
- Polished tube finish
- T-6063 aluminum tube material
Features- Up to 99.52% filtration efficiency
- Mandrel-bent tubing
- Washable and reusable air filter
- Manufactured and assembled in the U.S.A.
Notes- Product legal for sale in California under Executive Order (EO) number D-392-21. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.
| Part Number |
Brand |
Price |
 |
| A18218001DP |
AEM Air |
$226.93 |
|
|
|
|
1988-1991 GMC R3500 Volant Cold Air Intake
VOLANT COLD AIR INTAKE KIT
Volant's cold air intake kit is engineered to increase horsepower and engine response. Ensures a less restrictive air passage through its large diameter air duct sculptured with smooth bends. Its awesome performance look lid contributes to the system's sleek style and its silicon connectors provide flexibility while maintaining strength and thermal stability.
Specifications- Synthetic filter material
- Oiled filter element
- With heat shield
- Black tube finish
- Plastic tube material
Features- Up to 99.99% filtration efficiency
- Washable and reusable air filter
Notes- Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
| Part Number |
Brand |
Price |
 |
| V3115857 |
Volant |
$290.27 |
|
|
|
|
1988-1991 GMC R3500 Pro Comp - Pro Comp Es1000 Shock Absorber and Strut Assembly
PRO COMP ES1000 SHOCK ABSORBER, TWIN-TUBE, WHITE, SOLD INDIVIDUALLY
Experience optimum damping performance with Pro Comp ES1000 Shock Absorbers. These dampers utilize a superior seal and hardened piston rod protected by a polyvinyl dust boot for lasting durability even on the most demanding conditions.
Specifications:- 24.86 in. extended length
- 14.84 in. collapsed length
- 10.02 in. damper travel
- 2 in. body diameter
- Loop upper mount style
- Loop lower mount style
Features:- 1.38 in. nylon banded full displacement piston
- 0.63 in. chrome hardened piston rod
- Multi-lip and spring-tensioned rod seal for locking the S-924 high temperature shock fluid in
- Double-welded shock mounts for maximum strength
- Enhances vehicle control and driving comfort
| Part Number |
Brand |
Price |
 |
| E37124509 |
Pro Comp |
$28.15 |
|
|
|
|
1988-1991 GMC R3500 Pro Comp - Pro Comp Es3000 Shock Absorber and Strut Assembly
PRO COMP ES3000 SHOCK ABSORBER, TWIN-TUBE, WHITE, SOLD INDIVIDUALLY
Experience substantially improved driving comfort and performance on or off the road with Pro Comp ES3000 Shock Absorbers. These shocks utilize velocity sensitive valving that allows automatic adjustment to various road conditions. The large piston rod and unique Teflon rebound stop deliver just the right amount of control for a comfortable highway ride and demanding off-road conditions.
Specifications:- 24.84 in. extended length
- 14.82 in. collapsed length
- 10.02 in. damper travel
- 2.36 in. body diameter
- Loop upper mount style
- Loop lower mount style
Features:- 1.38 in. nylon banded full displacement piston
- 0.63 in. chrome hardened piston rod
- Cellular gas insert that reduces aeration and foaming
- Internal bump stop that prevents overextension
- 10-stage velocity sensitive valving for immediate adaptation to changing road conditions
| Part Number |
Brand |
Price |
 |
| E37324509 |
Pro Comp |
$36.49 |
|
|
|
|
1988-1991 GMC R3500 Pro Comp - Pro Comp Es9000 Shock Absorber and Strut Assembly
PRO COMP ES9000 SHOCK ABSORBER, TWIN-TUBE, WHITE, SOLD INDIVIDUALLY
Install the ultimate nitrogen gas charged shock absorber - Pro Comp ES9000 Shock Absorbers. These shocks, with their velocity sensitive valving technology and expanded tube design, continuously deliver optimum performance even with heavy loads. On or off the road, you are guaranteed of a smooth and comfortable ride, complete with the handling capabilities you need.
Specifications:- 14.71 in. extended length
- 9.56 in. collapsed length
- 5.15 in. damper travel
- Stem upper mount style
- Loop lower mount style
Features:- 1.38 in. nylon banded full displacement piston
- 0.63 in. chrome hardened piston rod
- Nitrogen gas charge
- 10-stage velocity sensitive valving for immediate adaptation to changing road conditions
- Expanded twin-tube design increases fluid capacity up to 50 percent
To protect it from contaminants, Pro Comp offers separately sold shock boots.
| Part Number |
Brand |
Price |
 |
| E37914515 |
Pro Comp |
$39.76 |
|
|
|
|
1988-1991 GMC R3500 Pro Comp - Pro Comp Es3000 Shock Absorber and Strut Assembly
PRO COMP ES3000 SHOCK ABSORBER, TWIN-TUBE, WHITE, SOLD INDIVIDUALLY
Experience substantially improved driving comfort and performance on or off the road with Pro Comp ES3000 Shock Absorbers. These shocks utilize velocity sensitive valving that allows automatic adjustment to various road conditions. The large piston rod and unique Teflon rebound stop deliver just the right amount of control for a comfortable highway ride and demanding off-road conditions.
Specifications:- 14.71 in. extended length
- 9.56 in. collapsed length
- 5.15 in. damper travel
- 2 in. body diameter
- Stem upper mount style
- Loop lower mount style
Features:- 1.38 in. nylon banded full displacement piston
- 0.63 in. chrome hardened piston rod
- Cellular gas insert that reduces aeration and foaming
- Internal bump stop that prevents overextension
- 10-stage velocity sensitive valving for immediate adaptation to changing road conditions
| Part Number |
Brand |
Price |
 |
| E37314515 |
Pro Comp |
$37.49 |
|
|
|
|
1988-1991 GMC R3500 Pro Comp - Pro Comp Toxic Shock Absorber and Strut Assembly
PRO COMP TOXIC SHOCK ABSORBER, TWIN-TUBE, WHITE, SOLD INDIVIDUALLY
Pro Comp Toxic Shock Absorbers are high performance shocks designed for standard height or lowered sport trucks or SUVs. These shocks offer quick and responsive performance under all driving conditions for precise control and improved handling.
Specifications:- 14.71 in. extended length
- 9.54 in. collapsed length
- 5.17 in. damper travel
- 1.75 in. body diameter
- Stem upper mount style
- Loop lower mount style
Features:- 1.75 in. body diameter
- Gas-charged design
- 10-stage Velocity Sensitive Valving specifically engineered for vehicles with limited suspension travel
- Carbon stamped nylon banded piston
- Chrome hardened piston rod with an external multi-lip shaft wiper seal
To protect your shock absorber from contaminants, Pro Comp offers a separately sold black mini boot set with part number 12147.
| Part Number |
Brand |
Price |
 |
| E37414515 |
Pro Comp |
$37.87 |
|
|
|
|
1988-1991 GMC R3500 Pro Comp - Pro Comp Toxic Shock Absorber and Strut Assembly
PRO COMP TOXIC SHOCK ABSORBER, TWIN-TUBE, WHITE, SOLD INDIVIDUALLY
Pro Comp Toxic Shock Absorbers are high performance shocks designed for standard height or lowered sport trucks or SUVs. These shocks offer quick and responsive performance under all driving conditions for precise control and improved handling.
Specifications:- 27.07 in. extended length
- 15.94 in. collapsed length
- 11.13 in. damper travel
- 2.36 in. body diameter
- Loop upper mount style
- Loop lower mount style
Features:- Gas-charged design
- 10-stage Velocity Sensitive Valving specifically engineered for vehicles with limited suspension travel
- Carbon stamped nylon banded piston
- Chrome hardened piston rod with an external multi-lip shaft wiper seal
This shock absorber is engineered for vehicles with 2-4 in. drop.
| Part Number |
Brand |
Price |
 |
| E37426500 |
Pro Comp |
$37.87 |
|
|
|
|
1988-1991 GMC R3500 Pro Comp - Pro Comp Es9000 Shock Absorber and Strut Assembly
PRO COMP ES9000 SHOCK ABSORBER, TWIN-TUBE, WHITE, SOLD INDIVIDUALLY
Install the ultimate nitrogen gas charged shock absorber - Pro Comp ES9000 Shock Absorbers. These shocks, with their velocity sensitive valving technology and expanded tube design, continuously deliver optimum performance even with heavy loads. On or off the road, you are guaranteed of a smooth and comfortable ride, complete with the handling capabilities you need.
Specifications:- 24.84 in. extended length
- 14.82 in. collapsed length
- 10.02 in. damper travel
- Loop upper mount style
- Loop lower mount style
Features:- 1.38 in. nylon banded full displacement piston
- 0.63 in. chrome hardened piston rod
- Nitrogen gas charge
- 10-stage velocity sensitive valving for immediate adaptation to changing road conditions
- Expanded twin-tube design increases fluid capacity up to 50 percent
To protect it from contaminants, Pro Comp offers separately sold shock boots.
| Part Number |
Brand |
Price |
 |
| E37924509 |
Pro Comp |
$39.76 |
|
|
|
|
1988-1991 GMC R3500 Pro Comp - Pro Comp Toxic Shock Absorber and Strut Assembly
PRO COMP TOXIC SHOCK ABSORBER, TWIN-TUBE, WHITE, SOLD INDIVIDUALLY
Pro Comp Toxic Shock Absorbers are high performance shocks designed for standard height or lowered sport trucks or SUVs. These shocks offer quick and responsive performance under all driving conditions for precise control and improved handling.
Specifications:- 20.59 in. extended length
- 12.7 in. collapsed length
- 7.89 in. damper travel
- 2 in. body diameter
- Loop upper mount style
- Loop lower mount style
Features:- Gas-charged design
- 10-stage Velocity Sensitive Valving specifically engineered for vehicles with limited suspension travel
- Carbon stamped nylon banded piston
- Chrome hardened piston rod with an external multi-lip shaft wiper seal
This shock absorber is engineered for vehicles with 0-6 in. drop.
| Part Number |
Brand |
Price |
 |
| E37420500 |
Pro Comp |
$37.87 |
|
|