|
|
1996-1999 GMC C3500 Dorman Intake Manifold
DORMAN INTAKE MANIFOLD KIT -- Upper Intake Manifold, A Direct-Fit OE Replacement Intake Manifold, Provides Better Fuel Mileage And Emission Level Control, Features Reinforced EGR And Coolant Passage Walls For Greater Durability And Reinforced Coolant Passages For Stronger Protection Against Recurring Leaks, It Also Has Thicker Intake Walls And Better Fillet Design To Prevent Warping Of The Manifold At The Gasket Mounting Surfaces, Comes With Plastic Vacuum Manifold And All Gaskets And O-Rings Needed For A Complete Installation, With Dorman's Limited Lifetime Warranty
| Part Number |
Brand |
Price |
 |
| RB615181 |
Dorman |
$91.93 |
|
|
|
|
1996-2000 GMC C3500 Dorman Intake Manifold
DORMAN INTAKE MANIFOLD KIT -- Comes with a thermostat, coolant nipple, distributor cap screws, and all gaskets and O-rings needed for a complete installation; A direct fit OE replacement intake manifold; Provides better fuel mileage and emission level control; Features reinforced aluminum coolant crossover that means there will be no repeat failure due to corrosion and vibration, integrated silicone gasket that means no separate gasket to deal with and fewer leak paths at cylinder heads and throttle body, and reinforced coolant passages that means stronger protection against recurring leaks; It also has thicker intake walls and better fillet design to prevent warping of the manifold at the gasket mounting surfaces; Designed to eliminate the double sided throttle body gasket; With Dorman's limited lifetime warranty.
| Part Number |
Brand |
Price |
|
| RB615300 |
Dorman |
$475.91 |
|
|
|
|
1996-2000 GMC C3500 Replacement Intake Manifold Gasket Set
INTAKE MANIFOLD GASKET SET -- Includes lower and upper set and central port injection; A high quality, direct fit OE replacement intake manifold gasket set; Covered by a 1-year unlimited mileage warranty.
| Part Number |
Brand |
Price |
|
| REPC312401 |
Replacement |
$21.89 |
|
|
|
|
1996-2000 GMC C3500 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Includes valve cover gasket and upper set; A high quality, direct fit OE replacement intake manifold gasket set.
| Part Number |
Brand |
Price |
|
| FPMS98000T |
Felpro |
$72.21 |
|
|
|
|
1992-2002 GMC C3500 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set.
| Part Number |
Brand |
Price |
|
| FPMS91585 |
Felpro |
$13.52 |
|
|
|
|
1996-2000 GMC C3500 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Includes lower and upper set and central port injection; A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90131 |
Felpro |
$33.31 |
|
|
|
|
1996-2000 GMC C3500 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Lower set only; Includes central port injection; A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS901312 |
Felpro |
$19.90 |
|
|
|
|
1991-1995 GMC C3500 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS95255 |
Felpro |
$20.29 |
|
|
|
|
1988-1995 GMC C3500 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS93317 |
Felpro |
$16.22 |
|
|
|
|
|
2001-2002 GMC C3500 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS96057 |
Felpro |
$99.87 |
|
|
|
|
1996-2000 GMC C3500 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Lower Set, Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS95826 |
Felpro |
$48.96 |
|
|
|
|
1982-1993 GMC C3500 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS91586 |
Felpro |
$14.87 |
|
|
|
|
1984-1990 GMC C3500 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90240 |
Felpro |
$13.01 |
|
|
|
|
1979-1986 GMC C3500 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS903142 |
Felpro |
$11.40 |
|
|
|
|
|
1979-1983 GMC C3500 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS902402 |
Felpro |
$12.60 |
|
|
|
|
1979 GMC C3500 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90323 |
Felpro |
$20.50 |
|
|
|
|
|
1973-1974 GMC C35/C3500 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90240 |
Felpro |
$13.01 |
|
|
|
|
|
1968-1974 GMC C35/C3500 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90323 |
Felpro |
$20.50 |
|
|
|
|
1974 GMC C35/C3500 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90322 |
Felpro |
$13.67 |
|
|
|
|
|
1968-1974 GMC C35/C3500 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS902402 |
Felpro |
$12.60 |
|
|
|
|
|
1974 GMC C35/C3500 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS903143 |
Felpro |
$11.62 |
|
|
|
|
|
1969-1974 GMC C35/C3500 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS903142 |
Felpro |
$11.40 |
|
|
|
|
1967-1968 GMC C35/C3500 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS9617 |
Felpro |
$12.64 |
|
|
|
|
1979-1986 GMC C3500 Edelbrock Intake Manifold
Performer Series, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, EGR, Idle-5500 RPM, Street Legal, Cast Finish, Recommended Gaskets FelPro Gasket Part # 1256 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E113701 |
Edelbrock |
$188.20 |
|
|
|
|
|
1967-1974 GMC C35/C3500 Pickup Edelbrock Intake Manifold
Performer Series, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, EGR, Idle-5500 RPM, Street Legal, Cast Finish, Recommended Gaskets FelPro Gasket Part # 1256 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E113701 |
Edelbrock |
$188.20 |
|
|
|
|
1979-1986 GMC C3500 Edelbrock Intake Manifold
RPM Air Gap, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For Square-Bore Carbs, Polished Finish, Not Legal For Sale Or Use On Pollution Controlled Motor Vehicles, Recommend FelPro Gasket PN[1205] for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1175011 |
Edelbrock |
$403.23 |
|
|
|
|
1979-1986 GMC C3500 Edelbrock Intake Manifold
RPM Air Gap, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For Square-Bore Carbs, Endurashine Chrome, Not Legal For Sale Or Use On Pollution Controlled Motor Vehicles, Recommend FelPro Gasket PN[1205] for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1175014 |
Edelbrock |
$382.40 |
|
|
|
|
1979-1986 GMC C3500 Edelbrock Intake Manifold
Performer Series, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For OEM 4 Barrel Or Edelbrock Carb, Street Legal, Cast Finish, Recommend FelPro Gasket Part # 1256 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E112101 |
Edelbrock |
$153.62 |
|
|
|
|
1979-1986 GMC C3500 Edelbrock Intake Manifold
C-26 Dual-Quad, Intake Manifold, Low Profile For Hood Clearance, Air Conditioning, Oil Filler Tube, Front Water Crossover Bosses Included, 6 7/16 Carb Center To Carb Center, Non-EGR, 1500-6500 RPM, Cast Finish, Not For Sale Or Use On Emission Equipped Vehicles, Use Edelbrock Camshaft Kit Part # 213 For Low-Torque Needs, Part # 52 For Top-End Power, Recommend Edelbrock Intake Gasket Kit Part # 721 Or Fel-Pro Part # 1256
| Part Number |
Brand |
Price |
|
| E115425 |
Edelbrock |
$316.17 |
|
|
|
|
1979-1986 GMC C3500 Edelbrock Intake Manifold
Performer Series, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, EGR, Idle-5500 RPM, Street Legal, Cast Finish, Use OE Gasket Part # GM10159409 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E113706 |
Edelbrock |
$257.33 |
|
|
|
|
1979-1986 GMC C3500 Edelbrock Intake Manifold
C357-B Three-Deuce, Intake Manifold, Includes Front Oil Filler Boss, Exhaust Heat Riser, Carb Center To Carb Center 5 1/2, Non-EGR, Idle-5500 RPM, Not For Sale Or Use On Emission Equipped Vehicles, Use Edelbrock Camshaft Kit Part # 213 For Low-Torque Needs, Part # 52 For Top-End Power, Recommend Edelbrock Intake Gasket Kit Part # 721 Or Fel-Pro Part # 1256
| Part Number |
Brand |
Price |
|
| E115419 |
Edelbrock |
$329.45 |
|
|
|
|
1979-1986 GMC C3500 Edelbrock Intake Manifold
RPM Air-Gap 2-R, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For High-Performance Rectangular Port Cylinder Heads Only, Cast Finish, Not Legal For Sale Or Use On Pollution Controlled Motor Vehicles, Will Not Fit Under Stock Hood, Recommend FelPro Gasket PN[1211] for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117562 |
Edelbrock |
$306.15 |
|
|
|
|
1979-1986 GMC C3500 Edelbrock Intake Manifold
Street Tunnel Ram, Dual Quad, Intake Manifold, Designed For Maximum Top End Power, EGR, 3500-7500rpm, Cast Finish, Not For Sale Or Use On Emissions Equipped Vehicles, Use Edelbrock Camshaft Kit PN[5002] For Low-Torque Needs, PN[7102] For Top-End Power, Recommend FelPro Gasket PN[1205] For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117110 |
Edelbrock |
$428.04 |
|
|
|
|
1979-1986 GMC C3500 Edelbrock - Performer Intake Manifold
EDELBROCK PERFORMER SERIES INTAKE MANIFOLD, ALUMINUM, CAST FINISH -- 50-state legal; Optimized for maximum power from idle to 5500 RPM; Dual plane; Square bore; With runner tuning; Designed to increase your vehicle's horsepower and torque over a wide RPM range; Non-EGR; With Edelbrock's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| E112104 |
Edelbrock |
$212.83 |
|
|
|
|
1979-1986 GMC C3500 Edelbrock Intake Manifold
Performer Series, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For OEM 4 Barrel Or Edelbrock Carb, Street Legal, Polished Finish, Recommend FelPro Gasket Part # 1256 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121011 |
Edelbrock |
$313.77 |
|
|
|
|
1979-1986 GMC C3500 Edelbrock Intake Manifold
RPM Air Gap, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For Square-Bore Carbs, Cast Finish, Not Legal For Sale Or Use On Pollution Controlled Motor Vehicles, Recommend FelPro Gasket PN[1205] for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117501 |
Edelbrock |
$264.52 |
|
|
|
|
1979-1983 GMC C3500 Edelbrock Intake Manifold
Performer 2-0, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, Non-EGR, Idle-5500 RPM, 4 Barrel Carb Manifold, Street Legal, Endurashine, Recommended Gaskets FelPro Gasket Part # 1212 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121614 |
Edelbrock |
$371.19 |
|
|
|
|
1979-1983 GMC C3500 Edelbrock Intake Manifold
Performer 2-0, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, Non-EGR, Idle-5500 RPM, 4 Barrel Carb Manifold, Street Legal, Cast Finish, Recommended Gaskets FelPro Gasket Part # 1212 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E112161 |
Edelbrock |
$235.94 |
|
|
|
|
|
1967-1974 GMC C35/C3500 Pickup Edelbrock Intake Manifold
C-26 Dual-Quad, Intake Manifold, Low Profile For Hood Clearance, Air Conditioning, Oil Filler Tube, Front Water Crossover Bosses Included, 6 7/16 Carb Center To Carb Center, Non-EGR, 1500-6500 RPM, Cast Finish, Not For Sale Or Use On Emission Equipped Vehicles, Use Edelbrock Camshaft Kit Part # 213 For Low-Torque Needs, Part # 52 For Top-End Power, Recommend Edelbrock Intake Gasket Kit Part # 721 Or Fel-Pro Part # 1256
| Part Number |
Brand |
Price |
|
| E115425 |
Edelbrock |
$316.17 |
|
|
|
|
|
1968-1974 GMC C35/C3500 Pickup Edelbrock Intake Manifold
Performer 2-0, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, Non-EGR, Idle-5500 RPM, 4 Barrel Carb Manifold, Street Legal, Endurashine, Recommended Gaskets FelPro Gasket Part # 1212 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121614 |
Edelbrock |
$371.19 |
|
|
|
|
|
1967-1974 GMC C35/C3500 Pickup Edelbrock Intake Manifold
Performer Series, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For OEM 4 Barrel Or Edelbrock Carb, Street Legal, Cast Finish, Recommend FelPro Gasket Part # 1256 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E112101 |
Edelbrock |
$153.62 |
|
|
|
|
|
1967-1974 GMC C35/C3500 Pickup Edelbrock Intake Manifold
Street Tunnel Ram, Dual Quad, Intake Manifold, Designed For Maximum Top End Power, EGR, 3500-7500rpm, Cast Finish, Not For Sale Or Use On Emissions Equipped Vehicles, Use Edelbrock Camshaft Kit PN[5002] For Low-Torque Needs, PN[7102] For Top-End Power, Recommend FelPro Gasket PN[1205] For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117110 |
Edelbrock |
$428.04 |
|
|
|
|
|
1968-1974 GMC C35/C3500 Pickup Edelbrock Intake Manifold
RPM Air-Gap 2-R, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For High-Performance Rectangular Port Cylinder Heads Only, Cast Finish, Not Legal For Sale Or Use On Pollution Controlled Motor Vehicles, Will Not Fit Under Stock Hood, Recommend FelPro Gasket PN[1211] for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117562 |
Edelbrock |
$306.15 |
|
|
|
|
|
1968-1974 GMC C35/C3500 Pickup Edelbrock Intake Manifold
Performer 2-0, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, Non-EGR, Idle-5500 RPM, 4 Barrel Carb Manifold, Street Legal, Cast Finish, Recommended Gaskets FelPro Gasket Part # 1212 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E112161 |
Edelbrock |
$235.94 |
|
|
|
|
1968-1974 GMC C35/C3500 Pickup Edelbrock Intake Manifold
RPM Air-Gap 2-0, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, Endurashine Chrome, Not Legal For Sale Or Use On Pollution Controlled Motor Vehicles, Will Not Fit Under Stock Hood, Recommend FelPro Gasket PN[1212] for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1175614 |
Edelbrock |
$409.61 |
|
|
|
|
|
1967-1974 GMC C35/C3500 Pickup Edelbrock Intake Manifold
RPM Air Gap, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For Square-Bore Carbs, Endurashine Chrome, Not Legal For Sale Or Use On Pollution Controlled Motor Vehicles, Recommend FelPro Gasket PN[1205] for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1175014 |
Edelbrock |
$382.40 |
|
|
|
|
|
1967-1974 GMC C35/C3500 Pickup Edelbrock Intake Manifold
RPM Air Gap, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For Square-Bore Carbs, Cast Finish, Not Legal For Sale Or Use On Pollution Controlled Motor Vehicles, Recommend FelPro Gasket PN[1205] for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117501 |
Edelbrock |
$264.52 |
|
|
|
|
|
1967-1974 GMC C35/C3500 Pickup Edelbrock Intake Manifold
Performer Series, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For OEM 4 Barrel Or Edelbrock Carb, Street Legal, Polished Finish, Recommend FelPro Gasket Part # 1256 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121011 |
Edelbrock |
$313.77 |
|
|
|
|
1968-1974 GMC C35/C3500 Pickup Edelbrock Intake Manifold
RPM Air-Gap 2-0, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, Cast Finish, Not Legal For Sale Or Use On Pollution Controlled Motor Vehicles, Will Not Fit Under Stock Hood, Recommend FelPro Gasket PN[1212] for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117561 |
Edelbrock |
$291.57 |
|
|
|
|
|
1967-1974 GMC C35/C3500 Pickup Edelbrock Intake Manifold
Performer Series, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, EGR, Idle-5500 RPM, Street Legal, Cast Finish, Use OE Gasket Part # GM10159409 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E113706 |
Edelbrock |
$257.33 |
|
|
|
|
|
1967-1974 GMC C35/C3500 Pickup Edelbrock - Performer Intake Manifold
EDELBROCK PERFORMER SERIES INTAKE MANIFOLD, ALUMINUM, CAST FINISH -- 50-state legal; Optimized for maximum power from idle to 5500 RPM; Dual plane; Square bore; With runner tuning; Designed to increase your vehicle's horsepower and torque over a wide RPM range; Non-EGR; With Edelbrock's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| E112104 |
Edelbrock |
$212.83 |
|
|
|
|
|
1967-1974 GMC C35/C3500 Pickup Edelbrock Intake Manifold
RPM Air Gap, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For Square-Bore Carbs, Polished Finish, Not Legal For Sale Or Use On Pollution Controlled Motor Vehicles, Recommend FelPro Gasket PN[1205] for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1175011 |
Edelbrock |
$403.23 |
|
|
|
|
|
1967-1974 GMC C35/C3500 Pickup Edelbrock Intake Manifold
C357-B Three-Deuce, Intake Manifold, Includes Front Oil Filler Boss, Exhaust Heat Riser, Carb Center To Carb Center 5 1/2, Non-EGR, Idle-5500 RPM, Not For Sale Or Use On Emission Equipped Vehicles, Use Edelbrock Camshaft Kit Part # 213 For Low-Torque Needs, Part # 52 For Top-End Power, Recommend Edelbrock Intake Gasket Kit Part # 721 Or Fel-Pro Part # 1256
| Part Number |
Brand |
Price |
|
| E115419 |
Edelbrock |
$329.45 |
|
|
|
|
1996-2000 GMC C3500 Delphi Intake Manifold
| Part Number |
Brand |
Price |
|
| W0133-1686813 |
Delphi |
$54.95 |
|
|
|
|
1996-2000 GMC C3500 Delphi Intake Manifold
| Part Number |
Brand |
Price |
|
| W0133-1686814 |
Delphi |
$356.95 |
|
|
|
|
1989-1995 GMC C3500 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .375-16 x 1 Hex Head Bolts And Twelve .375" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125002 |
Mr Gasket |
$21.41 |
|
|
|
|
1989-1995 GMC C3500 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- 0.375 in. -16 X 1 in. socket head; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G12956G |
Mr Gasket |
$8.99 |
|
|
|
|
1989-1995 GMC C3500 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Includes twelve 0.375 in. -16 x 1 in. hex head bolts and washers; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G12955G |
Mr Gasket |
$3.93 |
|
|
|
|
|
1979-1988 GMC C3500 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- 0.375 in. -16 X 1 in. socket head; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G12956G |
Mr Gasket |
$8.99 |
|
|
|
|
|
1979-1988 GMC C3500 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .375-16 x 1 Hex Head Bolts And Twelve .375" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125002 |
Mr Gasket |
$21.41 |
|
|
|
|
|
1979-1988 GMC C3500 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Includes twelve 0.375 in. -16 x 1 in. hex head bolts and washers; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G12955G |
Mr Gasket |
$3.93 |
|
|
|
|
1979-1986 GMC C3500 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Includes Sixteen .375-16 x 1.25 Socket Head Bolts And Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G12957G |
Mr Gasket |
$5.94 |
|
|
|
|
|
1967-1973 GMC C35/C3500 Pickup Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- 0.375 in. -16 X 1 in. socket head; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G12956G |
Mr Gasket |
$8.99 |
|
|
|
|
|
1967-1973 GMC C35/C3500 Pickup Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Includes twelve 0.375 in. -16 x 1 in. hex head bolts and washers; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G12955G |
Mr Gasket |
$3.93 |
|
|
|
|
|
1967-1973 GMC C35/C3500 Pickup Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .375-16 x 1 Hex Head Bolts And Twelve .375" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125002 |
Mr Gasket |
$21.41 |
|
|
|
|
|
1968-1969 GMC C35/C3500 Pickup Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Includes Sixteen .375-16 x 1.25 Socket Head Bolts And Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G12957G |
Mr Gasket |
$5.94 |
|
|
|
|
1979-2000 GMC C3500 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Features Twelve Point Smaller-Than-Standard Head And Flange, Includes Four .375- 16 x 1.75' Bolts And Twelve .375-16 x 1.25' Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G126093 |
Mr Gasket |
$26.56 |
|
|
|
|
|
1989-1997 GMC C3500 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Features Twelve Point Smaller-Than-Standard Head And Flange, Includes Four .375- 16 x 1.75' Bolts And Twelve .375-16 x 1.25' Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G126093 |
Mr Gasket |
$26.56 |
|
|
|
|
1989-1995 GMC C3500 Mr Gasket Intake Manifold Bolt Set
MR GASKET SUPER INTAKE MANIFOLD BOLT KIT, BLACK OXIDE COATED -- 3/8"-16 X 1-1/16", Consists Of 12 Bolts And Washers, Made From Grade 5 Steel For Strength And Durability, Black Oxide Coated To Resist Corrosion And Provide A Clean Professional Appearance, Features A Wide Washer Face Hex Head To Spread Clamp Force Evenly For A Positive Seal, Comes With Extra Thick Flat Washers That Provide Uniform Clamp Load And Prevent Galling On Aluminum Intake Manifolds, With Mr. Gasket's Limited Warranty
| Part Number |
Brand |
Price |
|
| G126080 |
Mr Gasket |
$11.23 |
|
|
|
|
1989-1995 GMC C3500 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Features Twelve Point Smaller-Than-Standard Head And Flange, Includes Twelve .375- 16 x 1' Bolts And Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G126091 |
Mr Gasket |
$14.49 |
|
|
|
|
1989-1995 GMC C3500 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .375-16 x 1 Point Head Bolts And Twelve .375" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125003 |
Mr Gasket |
$31.01 |
|
|
|
|
1989-1991 GMC C3500 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD GASKET SET, 2 PIECES -- 1.38' x 2.25' Port Dimensions, .0625' Thick, Made From High-Quality Cellulose/Nitrile Composition Gasket Material, Provides Excellent Sealing And Durability, Can Be Trimmed If Needed For Modified Ports, Ideal For OE Replacement, High Performance Street Use, Drag Racing, Or Oval Track Racing, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G12125 |
Mr Gasket |
$12.29 |
|
|
|
|
1989-1991 GMC C3500 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD GASKET SET, 2 PIECES -- 1.43'' x 2.30'' Port Dimensions, .0625'' Thick, Made From High-Quality Cellulose/Nitrile Composition Gasket Material, Provides Excellent Sealing And Durability, Can Be Trimmed If Needed For Modified Ports, Ideal For OE Replacement, High Performance Street Use, Drag Racing, Or Oval Track Racing, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G12137G |
Mr Gasket |
$24.90 |
|
|
|
|
1989-1991 GMC C3500 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD GASKET SET, 2 PIECES -- 1.35'' x 2.26'' Port Dimensions, .0625'' Thick, Made From High-Quality Cellulose/Nitrile Composition Gasket Material, Provides Excellent Sealing And Durability, Can Be Trimmed If Needed For Modified Ports, Ideal For OE Replacement, High Performance Street Use, Drag Racing, Or Oval Track Racing, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G12143 |
Mr Gasket |
$15.51 |
|
|
|
|
1989-1991 GMC C3500 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD GASKET SET, 2 PIECES -- 1.31' x 2.10' Port Dimensions, .0625 Thick, Made From High-Quality Cellulose/Nitrile Composition Gasket Material, Provides Excellent Sealing And Durability, Can Be Trimmed If Needed For Modified Ports, Ideal For OE Replacement, High Performance Street Use, Drag Racing, Or Oval Track Racing, Includes Steel Heat Riser Block Off Plates, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G12101G |
Mr Gasket |
$13.08 |
|
|
|
