|
|
2000-2006 Chevrolet Tahoe SL Intake Manifold
SL INTAKE MANIFOLD KIT -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; With mounting hardware, gaskets, and O-rings; A high quality, direct fit OE replacement intake manifold; Replaces OE Number 17113697, 89017230, 89017363, 89017364, 89017365, 89017366; Backed by 1-year SL unlimited-mileage warranty.
| Part Number |
Brand |
Price |
 |
| SL110818 |
SL |
$307.92 |
|
|
|
|
1996-2000 Chevrolet Tahoe SL Intake Manifold
SL INTAKE MANIFOLD KIT, PLASTIC -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; A high quality, direct fit OE replacement intake manifold kit; Replaces OE Numbers 10046089, 10108445, 10475922, 12555896, 12563335, 15650056, 17113205, 22514722, 22516256, 89017465; Backed by 1-year SL unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| SL12061004 |
SL |
$419.97 |
|
|
|
|
2000-2006 Chevrolet Tahoe Dorman Intake Manifold
DORMAN INTAKE MANIFOLD KIT -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Includes mounting hardware, gaskets, and O-rings; Features reinforced aluminum coolant crossover that means there will be no repeat failure due to corrosion and vibration, integrated silicone gasket that means no separate gasket to deal with and fewer leak paths at cylinder heads and throttle body, and reinforced coolant passages that means stronger protection against recurring leaks; It also has thicker intake walls and better fillet design to prevent warping of the manifold at the gasket mounting surfaces; Designed to eliminate the double sided throttle body gasket; Replaces OE numbers 17113697, 89017230, 89017363, 89017364, 89017365, 89017366.
| Part Number |
Brand |
Price |
|
| RB615183 |
Dorman |
$386.04 |
|
|
|
|
1996-2000 Chevrolet Tahoe Dorman Intake Manifold
DORMAN INTAKE MANIFOLD KIT, PLASTIC -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Includes plastic vacuum manifold, gaskets, and O-rings; Features reinforced aluminum coolant crossover that means there will be no repeat failure due to corrosion and vibration, integrated silicone gasket that means no separate gasket to deal with and fewer leak paths at cylinder heads and throttle body, and reinforced coolant passages that means stronger protection against recurring leaks; It also has thicker intake walls and better fillet design to prevent warping of the manifold at the gasket mounting surfaces; Designed to eliminate the double sided throttle body gasket; Replaces OE number 17113541.
| Part Number |
Brand |
Price |
|
| RB615181 |
Dorman |
$67.03 |
|
|
|
|
1996-2000 Chevrolet Tahoe Dorman Intake Manifold
DORMAN INTAKE MANIFOLD KIT, PLASTIC -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Includes thermostat, coolant nipple, distributor cap screws, gaskets, and O-rings; Features reinforced aluminum coolant crossover that means there will be no repeat failure due to corrosion and vibration, integrated silicone gasket that means no separate gasket to deal with and fewer leak paths at cylinder heads and throttle body, and reinforced coolant passages that means stronger protection against recurring leaks; It also has thicker intake walls and better fillet design to prevent warping of the manifold at the gasket mounting surfaces; Designed to eliminate the double sided throttle body gasket; Replaces OE number 17113201.
| Part Number |
Brand |
Price |
|
| RB615300 |
Dorman |
$528.36 |
|
|
|
|
2000-2003 Chevrolet Tahoe Replacement Intake Manifold Gasket
INTAKE MANIFOLD GASKETS, RUBBER, SET OF 2 -- A high quality, OE replacement intake manifold gasket set; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| REPC312403 |
Replacement |
$25.22 |
|
|
|
|
1996-2000 Chevrolet Tahoe Replacement Intake Manifold Gasket
INTAKE MANIFOLD GASKETS, RUBBER, SET OF 5 -- Includes lower set, upper set, and central port injection; A high quality, OE replacement intake manifold gasket set; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| REPC312401 |
Replacement |
$18.70 |
|
|
|
|
2002-2009 Chevrolet Tahoe Replacement Intake Manifold Gasket
INTAKE MANIFOLD GASKETS, RUBBER, SET OF 2 -- A high quality, OE replacement intake manifold gasket set; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| REPC312405 |
Replacement |
$41.74 |
|
|
|
|
1996-2000 Chevrolet Tahoe Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Includes valve cover gasket and upper set; A high quality, direct fit OE replacement intake manifold gasket set.
| Part Number |
Brand |
Price |
|
| FPMS98000T |
Felpro |
$60.49 |
|
|
|
|
2002-2009 Chevrolet Tahoe Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKETS, SET OF 2 -- High quality, direct fit OE replacement intake manifold gaskets.
| Part Number |
Brand |
Price |
|
| FPMS96587 |
Felpro |
$56.89 |
|
|
|
|
1996-2000 Chevrolet Tahoe Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, OE replacement intake manifold gasket set.
| Part Number |
Brand |
Price |
|
| FPMS90131 |
Felpro |
$23.38 |
|
|
|
|
1996-2000 Chevrolet Tahoe Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Lower set only; Includes central port injection; A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS901312 |
Felpro |
$25.20 |
|
|
|
|
1995-1999 Chevrolet Tahoe Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set.
| Part Number |
Brand |
Price |
|
| FPMS91585 |
Felpro |
$13.52 |
|
|
|
|
1995 Chevrolet Tahoe Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS93317 |
Felpro |
$18.10 |
|
|
|
|
2000-2009 Chevrolet Tahoe Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, OE replacement intake manifold gasket set.
| Part Number |
Brand |
Price |
|
| FPMS98016T |
Felpro |
$60.26 |
|
|
|
|
2000-2003 Chevrolet Tahoe Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKETS, SET OF 2 -- A high quality, OE replacement intake manifold gasket set.
| Part Number |
Brand |
Price |
|
| FPMS92211 |
Felpro |
$31.53 |
|
|
|
|
1995-2011 Chevrolet Tahoe Edelbrock - Edelbrock Victor JR. Intake Manifold
EDELBROCK VICTOR JR. SERIES INTAKE MANIFOLD, ALUMINIZED STEEL, NATURAL FINISH -- For off-road use only - Not legal for use on public roads and highways; Features low-profile that works well with minimal hood clearance and where up to 2 in. spacers can be used for performance tuning; Provides maximum performance for engine with standard port location, iron, and aluminum cylinder heads.
| Part Number |
Brand |
Price |
|
| E112975 |
Edelbrock |
$247.68 |
|
|
|
|
1995-2000 Chevrolet Tahoe Edelbrock - Edelbrock Torker II Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Torker II 302, Intake Manifold, Non-EGR, 2500-6500 RPM, Cast Finish, Recommend FelPro Gasket Part number 1250 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E115021 |
Edelbrock |
$247.31 |
|
|
|
|
1995-1999 Chevrolet Tahoe Edelbrock - Edelbrock Super Victor Intake Manifold
EDELBROCK SUPER VICTOR BBC MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 8500 rpm; 6.2 in. height; Single-plane manifold; Designed for rectangular port cylinder heads; Ideal for any big-block drag race engine with high air flow requirements; Outperformed the competition out of the box with just a port match and minor blending of critical surfaces; Recommended to use Fel-Pro intake gasket part number 1275.
| Part Number |
Brand |
Price |
|
| E112927 |
Edelbrock |
$315.66 |
|
|
|
|
1995-1999 Chevrolet Tahoe Edelbrock - Edelbrock Victor JR. Intake Manifold
EDELBROCK VICTOR JR. 454-R MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 7500 rpm; 5.9 in. height; Designed to optimize the flow characteristic of an 850 CFM standard flange carburetor; Features extended runner dividers, smaller plenum chambers, and unique runner design for better 60 foot times; Especially suited to 502 c.i.d. and smaller competition engines; Fits rectangular port heads; Fits to Edelbrock Victor race heads part number 77609 and Victor 24-degree part number 77409; Recommended to use Fel-Pro intake gasket part number 1275.
| Part Number |
Brand |
Price |
|
| E112902 |
Edelbrock |
$290.25 |
|
|
|
|
1995-1999 Chevrolet Tahoe Edelbrock - Edelbrock Victor 454-r Intake Manifold
EDELBROCK VICTOR 454-R MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 8000 rpm; 5.9 in. height; Offers superior performance for drag racing and marine; Fits rectangular port heads; Accepts 4500 series carburetor or standard flange double pumpers with Edelbrock adapter part number 8716; To provide maximum horsepower with 4500 series carburetor, use 1 in. spacer part number 8717; Fits to Edelbrock Victor race heads part number 77609; Recommended to use Fel-Pro intake gasket part number 1275.
| Part Number |
Brand |
Price |
|
| E112907 |
Edelbrock |
$310.44 |
|
|
|
|
1995-1999 Chevrolet Tahoe Edelbrock - Edelbrock Victor JR. Intake Manifold
EDELBROCK VICTOR JR. 454-O MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 7500 rpm; 5.9 in. height; Designed to optimize the flow characteristic of an 850 CFM standard flange carburetor; Features extended runner dividers, smaller plenum chambers, and unique runner design for better 60 foot times; Especially suited to 502 c.i.d. and smaller competition engines; Fits large oval port heads; Recommended to use Edelbrock intake gasket part number 7203.
| Part Number |
Brand |
Price |
|
| E112904 |
Edelbrock |
$290.25 |
|
|
|
|
1995-1999 Chevrolet Tahoe Edelbrock - Edelbrock Victor JR. Intake Manifold
EDELBROCK VICTOR JR. 454-R EFI MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 7500 rpm; 5.9 in. height; Designed to optimize the flow characteristic of an 850 CFM standard flange carburetor; Features extended runner dividers, smaller plenum chambers, and unique runner design for better 60 foot times; Especially suited to 502 c.i.d. and smaller competition engines.
| Part Number |
Brand |
Price |
|
| E1129025 |
Edelbrock |
$330.14 |
|
|
|
|
1995 Chevrolet Tahoe Edelbrock Intake Manifold
EDELBROCK PERFORMER SERIES MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 50-state legal; Designed for 1987-95 305-350 c.i.d. chevy throttle body injected engines; A stock replacement part for 305-350 V8s with factory T.B.I.; Accepts all OEM equipment and small-bore 1.69 in. throttle body injectors only; No chip changes or computer mods required unless entire 5.7L power package is used; Computer chip is supplied free of charge with proof of purchase of manifold, cam and heads; Will not fit caprice, buick or cadillac B bodies.
| Part Number |
Brand |
Price |
|
| E113704 |
Edelbrock |
$367.26 |
|
|
|
|
1995 Chevrolet Tahoe Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- 0.375 in. -16 x 1 in. socket head; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds.
| Part Number |
Brand |
Price |
|
| G12956G |
Mr Gasket |
$9.81 |
|
|
|
|
1995 Chevrolet Tahoe Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Includes twelve 0.375 in. -16 x 1 in. hex head bolts and washers; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G12955G |
Mr Gasket |
$4.75 |
|
|
|
|
1995 Chevrolet Tahoe Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .375-16 x 1 Hex Head Bolts And Twelve .375" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125002 |
Mr Gasket |
$22.26 |
|
|
|
|
1995 Chevrolet Tahoe Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .375-16 x 1 Point Head Bolts And Twelve .375" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125003 |
Mr Gasket |
$33.15 |
|
|
|
|
1995 Chevrolet Tahoe Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Features Twelve Point Smaller-Than-Standard Head And Flange, Includes Twelve .375- 16 x 1' Bolts And Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G126091 |
Mr Gasket |
$16.26 |
|
|
|
|
|
1995 Chevrolet Tahoe Mr Gasket Intake Manifold Bolt Set
MR GASKET SUPER INTAKE MANIFOLD BOLT KIT, BLACK OXIDE COATED -- 3/8"-16 X 1-1/16", Consists Of 12 Bolts And Washers, Made From Grade 5 Steel For Strength And Durability, Black Oxide Coated To Resist Corrosion And Provide A Clean Professional Appearance, Features A Wide Washer Face Hex Head To Spread Clamp Force Evenly For A Positive Seal, Comes With Extra Thick Flat Washers That Provide Uniform Clamp Load And Prevent Galling On Aluminum Intake Manifolds, With Mr. Gasket's Limited Warranty
| Part Number |
Brand |
Price |
|
| G126080 |
Mr Gasket |
$13.00 |
|
|
|
|
1995 Chevrolet Tahoe Holley Intake Manifold
EFI HIGH RISE DUAL PLANE INTAKE MANIFOLD -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Satin Finish, Power Band Idle to 6,000 RPM, EGR Compatible, Cast Iron Head
| Part Number |
Brand |
Price |
|
| H1930066 |
Holley |
$211.78 |
|
|
|
|
|
1996-2000 Chevrolet Tahoe OES Genuine Intake Manifold Gasket
| Part Number |
Brand |
Price |
|
| W0133-1686812 |
OES Genuine |
$60.95 |
|
|
|
|
1996-2000 Chevrolet Tahoe Delphi Intake Manifold
Delphi
Delphi is an Original Equipment supplier to over 25 vehicle manufacturers and is the largest and most diversified supplier of automotive parts to the global aftermarket.
| Part Number |
Brand |
Price |
|
| W0133-1686813 |
Delphi |
$65.95 |
|
|
|
|
1996-2000 Chevrolet Tahoe Delphi Intake Manifold
Delphi
Delphi is an Original Equipment supplier to over 25 vehicle manufacturers and is the largest and most diversified supplier of automotive parts to the global aftermarket.
| Part Number |
Brand |
Price |
|
| W0133-1686814 |
Delphi |
$410.95 |
|
|
|
|
1996-2000 Chevrolet Tahoe Delphi Intake Manifold
DELPHI INTAKE MANIFOLD -- 50-state legal; A high quality, direct fit OE replacement intake manifold.
| Part Number |
Brand |
Price |
|
| DELFH10113 |
Delphi |
$48.46 |
|
|
|
|
1996-2000 Chevrolet Tahoe Professional Products - Professional Products Hurricane Plus Intake Manifold
PROFESSIONAL PRODUCTS HURRICANE PLUS INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 3500 to 8000 RPM power range; A single plane 360-degree manifold design that provides optimum power in the mid to upper RPM ranges; Features a standard square bore carb flange, nitrous bosses, dual distributor hold-downs, four corner water ports and a special water flow divider; The ports are specifically positioned to provide an optimum starting point for custom porting.
| Part Number |
Brand |
Price |
|
| P8952032 |
Professional Products |
$246.38 |
|
|
|
|
1996-2000 Chevrolet Tahoe Professional Products - Professional Products Hurricane Intake Manifold
PROFESSIONAL PRODUCTS HURRICANE PLUS INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 3000 to 7500 RPM power range; A single plane 360-degree manifold design that provides optimum power in the mid to upper RPM ranges; Features a standard square bore carb flange, nitrous bosses, dual distributor hold-downs, four corner water ports and a special water flow divider; The ports are specifically positioned to provide an optimum starting point for custom porting.
| Part Number |
Brand |
Price |
|
| P8952033 |
Professional Products |
$187.71 |
|
|
|
|
1996-2000 Chevrolet Tahoe Professional Products - Professional Products Cyclone Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; Idle to 5500 RPM power range; Casted from steel molds which provide a tighter grain casting; A great all-around street manifold for mild performance applications; Set up to accept a spread bore carburetor but comes with an adapter plane that permits the use of square bore carburetors; 100 percent pressure tested for leaks to eliminate installation problems; Features four corner water outlets and dual distributor hold-downs; No EGR provisions; Will work with a late model style water neck, alternator, HEI ignition system and air conditioning brackets.
| Part Number |
Brand |
Price |
|
| P8952007 |
Professional Products |
$143.14 |
|
|
|
|
1996-2000 Chevrolet Tahoe Professional Products - Professional Products Cyclone Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE INTAKE MANIFOLD, ALUMINUM -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Idle to 5500 RPM power range; Casted from steel molds which provide a tighter grain casting; A great all-around street manifold for mild performance applications; Set up to accept a spread bore carburetor but comes with an adapter plane that permits the use of square bore carburetors; 100 percent pressure tested for leaks to eliminate installation problems; Features four corner water outlets; Dual distributor hold-downs; No EGR provisions; Will work with a late model style water neck, alternator, HEI ignition system and air conditioning brackets.
| Part Number |
Brand |
Price |
|
| P8952006 |
Professional Products |
$184.18 |
|
|
|
|
1995 Chevrolet Tahoe Professional Products - Professional Products Cyclone Plus Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE PLUS INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; Idle to 5500 RPM power range; 0.38 in. taller and has larger ports and runners than the standard cyclone intake manifold; Produces more power and torque; Features a built-in rear water crossover passage for better water flow and cooler engine operating temperatures, nitrous bosses and rear water ports; Uses a square bore carb flange which permits direct bolt-on of all popular holley carburetors.
| Part Number |
Brand |
Price |
|
| P8952010 |
Professional Products |
$215.51 |
|
|
|
|
1995 Chevrolet Tahoe Professional Products - Professional Products Cyclone Plus Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE PLUS INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; Idle to 5500 RPM power range; Supplied with a quality intake gasket set, 12-point stainless steel attachment bolts, stainless washers, aluminum pipe plugs and permatex ultra-black silicone sealer; 0.38 in. taller and has larger ports and runners than the standard cyclone intake manifold; Produces more power and torque; Uses a square bore carb flange which permits direct bolt-on of all popular holley carburetors; Features a built-in rear water crossover passage for better water flow and cooler engine operating temperatures, nitrous bosses and rear water ports.
| Part Number |
Brand |
Price |
|
| P8952011 |
Professional Products |
$163.88 |
|
|
|
|
1995 Chevrolet Tahoe Professional Products - Professional Products Cyclone Plus Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE PLUS INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; Idle to 5500 RPM power range; 0.38 in. taller and has larger ports and runners than the standard cyclone intake manifold; Produces more power and torque; Features a built-in rear water crossover passage for better water flow and cooler engine operating temperatures, nitrous bosses and rear water ports; Uses a square bore carb flange which permits direct bolt-on of all popular holley carburetors.
| Part Number |
Brand |
Price |
|
| P8952012 |
Professional Products |
$184.35 |
|
|
|
|
1995 Chevrolet Tahoe Professional Products - Professional Products Typhoon Intake Manifold
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; 0.70 in. taller than cyclone intake manifold; A high performance 180-degree dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; will not work on engines with reverse water flow; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8952020 |
Professional Products |
$192.78 |
|
|
|
|
1995 Chevrolet Tahoe Professional Products - Professional Products Typhoon Intake Manifold
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; 0.70 in. taller than cyclone intake manifold; A high performance 180-degree dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; will not work on engines with reverse water flow; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8952021 |
Professional Products |
$147.75 |
|
|
|
|
1995 Chevrolet Tahoe Professional Products - Professional Products Typhoon Intake Manifold
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; 0.70 in. taller than cyclone intake manifold; A high performance 180-degree dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; will not work on engines with reverse water flow; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8952022 |
Professional Products |
$251.39 |
|
|
|
|
1995 Chevrolet Tahoe Professional Products - Professional Products Hurricane Intake Manifold
PROFESSIONAL PRODUCTS HURRICANE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 3000 to 7500 RPM power range; Consistently outperformed all of the well known brands which are also much more expensive; Numerous dyno tests have proven over and over that there is no better manifold of this type for achieving maximum power and torque while actually using less fuel doing it.
| Part Number |
Brand |
Price |
|
| P8952030 |
Professional Products |
$234.43 |
|
|
|
|
1995 Chevrolet Tahoe Professional Products - Professional Products Super Hurricane Intake Manifold
PROFESSIONAL PRODUCTS SUPER HURRICANE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 3000 to 7500 RPM power range; With machined injector bosses; Features plenum and runners larger than Hurricane or Hurricane Plus series; Designed for use on very large small block engines using gas or alcohol or smaller engines running on alcohol; Capable of being ported out to a Fel-Pro intake gasket part number 1207; Requires fuel rail kit part number 10608.
| Part Number |
Brand |
Price |
|
| P8952038 |
Professional Products |
$278.79 |
|
|
|
|
1995 Chevrolet Tahoe Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; Not for exhaust heated or stock style chokes; Will not work on engines with reverse water flow.
| Part Number |
Brand |
Price |
|
| P8952025 |
Professional Products |
$239.24 |
|
|
|
|
1995 Chevrolet Tahoe Professional Products - Professional Products Cyclone Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; Idle to 5500 RPM power range; Casted from steel molds which provide a tighter grain casting; A great all-around street manifold for mild performance applications; Set up to accept a spread bore carburetor but comes with an adapter plane that permits the use of square bore carburetors; 100 percent pressure tested for leaks to eliminate installation problems; No EGR provisions; For standard heads application.
| Part Number |
Brand |
Price |
|
| P8952000 |
Professional Products |
$181.18 |
|
|
|
|
1995 Chevrolet Tahoe Professional Products - Professional Products Cyclone Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE INTAKE MANIFOLD, ALUMINUM -- 50-state legal; Idle to 5500 RPM power range; Casted from steel molds which provide a tighter grain casting; A great all-around street manifold for mild performance applications; Set up to accept a spread bore carburetor but comes with an adapter plane that permits the use of square bore carburetors; 100 percent pressure tested for leaks to eliminate installation problems; Features four corner water outlets and dual distributor hold-downs; With EGR provisions; Will work with a late model style water neck, alternator, HEI ignition system and air conditioning brackets.
| Part Number |
Brand |
Price |
|
| P8952009 |
Professional Products |
$152.53 |
|
|
