|
|
1977-1979 Pontiac Phoenix Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
 |
| FPMS903142 |
Felpro |
$10.67 |
|
|
|
|
|
1979 Pontiac Phoenix Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS96033 |
Felpro |
$25.49 |
|
|
|
|
|
1980-1984 Pontiac Phoenix Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS91022 |
Felpro |
$21.69 |
|
|
|
|
|
1982-1984 Pontiac Phoenix Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS90563 |
Felpro |
$8.99 |
|
|
|
|
|
1980-1983 Pontiac Phoenix Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS90563 |
Felpro |
$8.99 |
|
|
|
|
|
1978 Pontiac Phoenix Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- With freeze plugs on ends of heads; A high quality, direct fit OE replacement intake manifold gasket set; Even firing; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS96032 |
Felpro |
$30.02 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, EGR, Idle-5500 RPM, Cast Finish, Recommended Gaskets FelPro Gasket Part number 1256 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E113701 |
Edelbrock |
$194.67 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Edelbrock - Edelbrock Thunder Intake Manifold
EDELBROCK PERFORMER EPS INTAKE MANIFOLD -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Non-EGR, A Dual-Plane Manifold That Is Optimized To Deliver Superior Performance With Edelbrock Square-Bore Performer Series Or Thunder Series AVS Carburetors, Has A Runner Design That Is Tuned For Peak Torque Around 3500 RPM On A 350-Inch Engine And It Is Ideal For Power From Off-Idle To 5500 RPM, Dyno Tested To Increase Power By Up To 5 Hp And 9 lb.-ft. of Torque Over The Edelbrock Performer Manifold 2101, Can Be Matched With A Dependable Edelbrock Square-Bore Carburetor For Maximum Performance Gains
| Part Number |
Brand |
Price |
|
| E112701 |
Edelbrock |
$173.59 |
|
|
|
|
|
1977 Pontiac Phoenix Edelbrock Intake Manifold
EDELBROCK PERFORMER OLDS 350 INTAKE MANIFOLD, CAST FINISH -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 2.5 in. Height A, 3.9 in. Height B, 1.18 in. X 1.86 in. Port Exit, Idle-5500 RPM, Dual-Plane Design With Runner Tuning, Designed To Increase Your Vehicles Horsepower And Torque Over A Wide RPM Range, For Non-EGR, Street Legal Part For 307, 350, And 403 V8s With OEM 4-bbl, Includes EGR Block-Off Plate, Factory Cruise Control Will Not Clear EGR Valve Without Linkage Alteration, Use Intake Gasket Fel-Pro MS96027, With Edelbrock's 90-Day Warranty
| Part Number |
Brand |
Price |
|
| E113711 |
Edelbrock |
$283.34 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Edelbrock Intake Manifold
EDELBROCK RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Designed for street 396-502 c.i.d. Chevy V8s with large oval-port cylinder heads, 1975 and earlier; Incorporates the same race-winning technology that been used on our Victor Series competition intakes for years; Features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power; Includes rear water outlets, two distributor clamp locations and nitrous bosses; Accepts all late model alternator and A/C brackets for the street; For square bore carburetors only; No provision for exhaust heated chokes and no exhaust crossover; Will not fit under stock hood of Corvette, 1965-67 Chevelle or 1967-81 Camaro.
| Part Number |
Brand |
Price |
|
| E1154251 |
Edelbrock |
$575.37 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer EPS, Intake Manifold, Produces Peak Torque Increases At 3500 RPM, Power Where You Can Use It Daily, Non-EGR, Idle-5500 RPM, Polished Finish, Recommended Gaskets FelPro Gasket Part number 1256 for
| Part Number |
Brand |
Price |
|
| E1127011 |
Edelbrock |
$283.94 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For Square-Bore Carbs, Cast Finish, Recommend FelPro Gasket Part Number 1205 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117501 |
Edelbrock |
$264.52 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Edelbrock - Edelbrock Performer EPS Intake Manifold
EDELBROCK PERFORMER EPS MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Provides up to 5 h.p. and 5 lb.-ft. of torque at up to 4500 rpm; 3.74 in. A x 4.80 in. B height; 1.15 x 1.87 in. port exit; Includes oil fill tube and matching push-in breather cap; Dual-plane manifold; Non-EGR; Optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder AVS series carburetors; Features modern runner design for those who want the vintage look of Edelbrock classic valve covers with no breathers; Recommended to use Edelbrock intake gasket part number 7201.
| Part Number |
Brand |
Price |
|
| E112703 |
Edelbrock |
$182.16 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For OEM 4 Barrel Or Edelbrock Carb, Polished Finish, Recommend FelPro Gasket Part number 1256 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121011 |
Edelbrock |
$313.77 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Street Tunnel Ram, Dual Quad, Intake Manifold, Designed For Maximum Top End Power, EGR, 3500-7500rpm, Cast Finish, Use Edelbrock Camshaft Kit Part Number 5002 For Low-Torque Needs, Part Number 7102 For Top-End Power, Recommend FelPro Gasket Part Number 1205 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117110 |
Edelbrock |
$428.04 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; C357-B Three-Deuce, Intake Manifold, Includes Front Oil Filler Boss, Exhaust Heat Riser, Carb Center To Carb Center 5.5, Non-EGR, Idle-5500 RPM, Use Edelbrock Camshaft Kit Part number 213 For Low-Torque Needs, Part number 52 For Top-End Power, Recommend Edelbrock Intake Gasket Kit Part number 721 Or Fel-Pro Part number 1256
| Part Number |
Brand |
Price |
|
| E115419 |
Edelbrock |
$329.45 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For Square-Bore Carbs, Endurashine Chrome, Recommend FelPro Gasket Part Number 1205 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1175014 |
Edelbrock |
$382.40 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For OEM 4 Barrel Or Edelbrock Carb, Cast Finish, Recommend FelPro Gasket Part number 1256 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E112101 |
Edelbrock |
$157.86 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, EGR, Idle-5500 RPM, Cast Finish, Use OE Gasket Part number GM10159409 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E113706 |
Edelbrock |
$257.33 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For Square-Bore Carbs, Polished Finish, Recommend FelPro Gasket Part Number 1205 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1175011 |
Edelbrock |
$413.45 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Edelbrock - Edelbrock Performer EPS Intake Manifold
EDELBROCK PERFORMER EPS MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Provides up to 5 h.p. and 9 lb.-ft. of torque; Optimized for maximum power from idle to 5500 rpm; 3.74 in. A x 4.80 in. B height; 1.15 x 1.87 in. port exit; Includes oil fill tube and matching push-in breather cap; Dual-plane manifold; Non-EGR; Optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors.
| Part Number |
Brand |
Price |
|
| E1127034 |
Edelbrock |
$258.61 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Edelbrock Intake Manifold
EDELBROCK RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 1500 to 6500 rpm; 5.05 in. x 5.64 in. height; 5.35 in. carburetor pad height; 0.98 x 2.72 in. port exit; Non-EGR; Includes timing control module; Delivers outstanding performance and broad torque band throughout its rpm range; Designed for LS1 engines.
| Part Number |
Brand |
Price |
|
| E117525 |
Edelbrock |
$371.08 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer EPS, Intake Manifold, Produces Peak Torque Increases At 3500 RPM, Power Where You Can Use It Daily, Non-EGR, Idle-5500 RPM, Endurashine, Recommended Gaskets FelPro Gasket Part number 1256
| Part Number |
Brand |
Price |
|
| E1127014 |
Edelbrock |
$226.02 |
|
|
|
|
|
1977 Pontiac Phoenix Edelbrock Intake Manifold
EDELBROCK PERFORMER SERIES MANIFOLD, ALUMINUM, ENDURASHINE, SOLD INDIVIDUALLY -- 50-state legal; Designed for street 307-330-350-403 c.i.d. Oldsmobile V8s, 1966-85; For non-EGR, comes with a universal pad to fit most carburetors with electric chokes For EGR; Use Performer 3701 for stock replacement; Will fit 1980-1/2 to 1985 307 c.i.d. V8s with 5A heads.
| Part Number |
Brand |
Price |
|
| E112711 |
Edelbrock |
$381.33 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; Not for exhaust heated or stock style chokes; Will not work on engines with reverse water flow.
| Part Number |
Brand |
Price |
|
| P8952025 |
Professional Products |
$255.99 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; Not for exhaust heated or stock style chokes; Will not work on engines with reverse water flow.
| Part Number |
Brand |
Price |
|
| P8952026 |
Professional Products |
$193.21 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Professional Products - Professional Products Hurricane Intake Manifold
PROFESSIONAL PRODUCTS HURRICANE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 3000 to 7500 RPM power range; Consistently outperformed all of the well known brands which are also much more expensive; Numerous dyno tests have proven over and over that there is no better manifold of this type for achieving maximum power and torque while actually using less fuel doing it.
| Part Number |
Brand |
Price |
|
| P8952030 |
Professional Products |
$250.85 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; Not for exhaust heated or stock style chokes; Will not work on engines with reverse water flow.
| Part Number |
Brand |
Price |
|
| P8952027 |
Professional Products |
$263.63 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Professional Products - Professional Products Hurricane Intake Manifold
PROFESSIONAL PRODUCTS HURRICANE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 3000 to 7500 RPM power range; A single plane 360-degree manifold design that provides optimum power in the mid to upper RPM ranges; Features a standard square bore carb flange, nitrous bosses, dual distributor hold-downs, four corner water ports and a special water flow divider; the ports are specifically positioned to provide an optimum starting point for custom porting.
| Part Number |
Brand |
Price |
|
| P8952031 |
Professional Products |
$185.10 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Professional Products - Professional Products Cyclone Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE INTAKE MANIFOLD, ALUMINUM -- 50-state legal; Idle to 5500 RPM power range; Casted from steel molds which provide a tighter grain casting; A great all-around street manifold for mild performance applications; Set up to accept a spread bore carburetor but comes with an adapter plane that permits the use of square bore carburetors; 100 percent pressure tested for leaks to eliminate installation problems; Features four corner water outlets and dual distributor hold-downs; With EGR provisions; Will work with a late model style water neck, alternator, HEI ignition system and air conditioning brackets.
| Part Number |
Brand |
Price |
|
| P8952009 |
Professional Products |
$163.20 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Professional Products - Professional Products Typhoon Intake Manifold
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; 0.70 in. taller than cyclone intake manifold; A high performance 180-degree dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; will not work on engines with reverse water flow; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8952022 |
Professional Products |
$269.00 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; Not for exhaust heated or stock style chokes; Will not work on engines with reverse water flow.
| Part Number |
Brand |
Price |
|
| P8952028 |
Professional Products |
$200.85 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Professional Products - Professional Products Cyclone Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE INTAKE MANIFOLD, ALUMINUM -- 50-state legal; Idle to 5500 RPM power range; Casted from steel molds which provide a tighter grain casting; A great all-around street manifold for mild performance applications; 100 percent pressure tested for leaks to eliminate installation problems; Set up to accept a spread bore carburetor but comes with an adapter plane that permits the use of square bore carburetors; No EGR provisions.
| Part Number |
Brand |
Price |
|
| P8952001 |
Professional Products |
$146.47 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Professional Products - Professional Products Super Hurricane Intake Manifold
PROFESSIONAL PRODUCTS SUPER HURRICANE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 3000 to 7500 RPM power range; Features a larger plenum and runners than hurricane or hurricane plus; Will outperform other leading intake manifolds from 5200 RPM to 7200 RPM and uses less fuel while making more power; Designed for use on very large small block engines using gas or alcohol or smaller engines running on alcohol.
| Part Number |
Brand |
Price |
|
| P8952036 |
Professional Products |
$286.93 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Professional Products - Professional Products Typhoon Intake Manifold
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; 0.70 in. taller than cyclone intake manifold; A high performance 180-degree dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; will not work on engines with reverse water flow; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8952020 |
Professional Products |
$206.27 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Professional Products - Professional Products Cyclone Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; Idle to 5500 RPM power range; Casted from steel molds which provide a tighter grain casting; A great all-around street manifold for mild performance applications; Set up to accept a spread bore carburetor but comes with an adapter plane that permits the use of square bore carburetors; 100 percent pressure tested for leaks to eliminate installation problems; No EGR provisions; For standard heads application.
| Part Number |
Brand |
Price |
|
| P8952000 |
Professional Products |
$193.86 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Professional Products - Professional Products Cyclone Plus Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE PLUS INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; Idle to 5500 RPM power range; 0.38 in. taller and has larger ports and runners than the standard cyclone intake manifold; Produces more power and torque; Features a built-in rear water crossover passage for better water flow and cooler engine operating temperatures, nitrous bosses and rear water ports; Uses a square bore carb flange which permits direct bolt-on of all popular holley carburetors.
| Part Number |
Brand |
Price |
|
| P8952010 |
Professional Products |
$230.59 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Spectre Intake Manifold Bolt Set
SPECTRE INTAKE BOLT AND WASHER SET, 12 PIECES -- 3/8"-16 x 1", Made Of Grade 5 Steel And Zinc Hex Head, With Manufacturer's Limited Warranty
| Part Number |
Brand |
Price |
|
| S714652 |
Spectre |
$2.78 |
|
|
|
|
|
1977-1978 Pontiac Phoenix Felpro Intake & Exhaust Manifold Gasket
FELPRO INTAKE AND EXHAUST MANIFOLD GASKET -- A high quality, direct fit OE replacement intake and exhaust manifold gasket.
| Part Number |
Brand |
Price |
|
| FPMS90376 |
Felpro |
$14.14 |
|
|
|
|
1982-1984 Pontiac Phoenix Victor Intake Manifold Gasket
VICTOR INTAKE MANIFOLD GASKET, SOLD INDIVIDUALLY -- A high quality, OE replacement intake manifold gasket; Replaces OE number 10066662.
| Part Number |
Brand |
Price |
|
| VICMS15668 |
Victor |
$11.45 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Victor Intake Manifold Gasket
VICTOR INTAKE MANIFOLD GASKET KIT -- A high quality, OE replacement intake manifold gasket kit; Replaces OE numbers MSZ1776, Z1695, 14038088, 14019844, 14034821, 345195, 356801, 356802, 3733878, 3734115, 3931600, 3957985, 476007, and 6258833.
| Part Number |
Brand |
Price |
|
| VICMS15315 |
Victor |
$10.93 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Weiand Intake Manifold
WEIAND X-CELERATOR SERIES INTAKE MANIFOLD, SATIN FINISH -- Front/Rear Height 3.09/4.06, Port Size 1.85 x 1.15 in., Power Band To 7000 RPM, Single 4 Barrel Manifold Which Features 360 Degree Single Plane Open Plenum, Square Carburetor Mounting Flange, IMCA Approved, 55-86 Bolt Pattern, Designed Primarily For High-Performance Street And Track Use, Works Best With A Modified Engine
| Part Number |
Brand |
Price |
|
| W2075471 |
Weiand |
$180.85 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Weiand - Weiand Action Plus Intake Manifold
WEIAND ACTION PLUS SERIES INTAKE MANIFOLD, SATIN FINISH -- Single 4 Barrel Manifold, Non-EGR, Square Flange Carburetor Mounting, 180 Degree Low-Rise Dual-Plane Manifold Designed As A Stock Replacement Manifold With Improved Power And Torque Characteristics, Effective RPM Range Idle-5500, Carburetor Mounting Pads Available, Satin Finish
| Part Number |
Brand |
Price |
|
| W208120 |
Weiand |
$127.88 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Weiand - Weiand Stealth Air Strike Intake Manifold
WEIAND STEALTH AIR STRIKE SERIES INTAKE MANIFOLD, SATIN FINISH -- Single 4 Barrel Manifold, Non-EGR, Power Band 1500-6700 RPM, Square Bore, High Rise And Dual Plane Design For Maximum Torque And Horsepower For Stout Street And Strip Engines, Isolated Runners Reduce Intake Charge Heating And Promote Airflow Between The Hot Engine And The Intake, 1987-Later With Aluminum Heads, Satin Finish
| Part Number |
Brand |
Price |
|
| W208501 |
Weiand |
$207.56 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Professional Products Intake Manifold Bolt Set
PROFESSIONAL PRODUCTS INTAKE MANIFOLD BOLT SET -- A 12-Point Stainless Steel Intake Manifold Bolt Kit With Polished Wrench Heads For Small Block Installations
| Part Number |
Brand |
Price |
|
| P8952120 |
Professional Products |
$23.12 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Weiand Intake Manifold
WEIAND STEALTH SERIES INTAKE MANIFOLD, EVERBRIGHT FINISH -- Single 4 Barrel Manifold, Non-EGR, Power Band 1500-6700 RPM, Square Bore, High Rise And Dual Plane, Combines The Low-End Throttle Response Of A 180 Degree Design With The Top-End Power Of A Single Plane Manifold, Everbright
| Part Number |
Brand |
Price |
|
| W208150C |
Weiand |
$277.44 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Weiand Intake Manifold
WEIAND STEALTH SERIES INTAKE MANIFOLD, SATIN FINISH -- Single 4 Barrel Manifold, Non-EGR, Power Band 1500-6700 RPM, Square Bore, High Rise And Dual Plane, Combines The Low-End Throttle Response Of A 180 Degree Design With The Top-End Power Of A Single Plane Manifold, Satin Finish
| Part Number |
Brand |
Price |
|
| W208150 |
Weiand |
$143.04 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Spectre Intake Manifold Gasket
SPECTRE INTAKE MANIFOLD GASKETS, STEEL, SET OF 2 -- Double beaded; Includes EGR restrictor plate; High quality, direct fit intake manifold gaskets; Fits to intake manifold with stock size ports.
| Part Number |
Brand |
Price |
|
| S71400 |
Spectre |
$13.89 |
|
|
|
|
|
1977-1979 Pontiac Phoenix Weiand Intake Manifold
WEIAND HI-RAM INTAKE MANIFOLD, SATIN -- Front Height 9.06, Rear Height 9.50, Port Height 1.89%X94, Port Width 1.18, Features A D-Shaped Port Runner Design, Large Plenum Chamber, And Square Bore Carburetor Mounting Flange, Provides Optimum Thrust Of The Air/Fuel Mixture To The Cylinder Head Intake Ports, Engineered To Produce A Power Band That Ranges From 2800 To 8000 RPM
| Part Number |
Brand |
Price |
|
| W201984 |
Weiand |
$378.03 |
|
|
|
|
|
1977-1979 Pontiac Phoenix DNJ Intake Manifold Gasket
DNJ INTAKE MANIFOLD GASKET KIT -- A high quality, OE replacement intake manifold gasket kit.
| Part Number |
Brand |
Price |
|
| DNJIG3101 |
DNJ |
$13.22 |
|
|
