|
|
|
|
Intake Manifold Plymouth PB300 Van |
|
|
1974 Plymouth PB300 Van Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Supplementary fiber port gaskets; A high quality, direct fit OE replacement intake manifold gasket set; Must be used with valley pan.
| Part Number |
Brand |
Price |
 |
| FPMS90175 |
Felpro |
$20.86 |
|
|
|
|
|
1974 Plymouth PB300 Van Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- 0.875 in. x 2 in. port dimensions; Small port size; A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS900411 |
Felpro |
$13.78 |
|
|
|
|
|
1974 Plymouth PB300 Van Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Valley pan; A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS96000 |
Felpro |
$21.84 |
|
|
|
|
|
1974 Plymouth PB300 Van Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- 1 in. x 2.1875 in. port dimensions; Large port size; A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90109 |
Felpro |
$18.55 |
|
|
|
|
|
1974 Plymouth PB300 Van Edelbrock Intake Manifold
EDELBROCK RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Designed for 340-360 c.i.d. Chrysler V8s and 318 c.i.d. engines with 340-360 cylinder heads, the RPM Air-Gap incorporates the same race-winning technology that been used on our Victor Series competition intakes for years; The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power; Accepts early-style waterneck only; Will not accept stock Thermo-Quad carburetor; Will not fit 1992 and later Magnum engines; Includes nitrous bosses; No provision for exhaust heated chokes and no exhaust crossover.
| Part Number |
Brand |
Price |
|
| E1175764 |
Edelbrock |
$442.72 |
|
|
|
|
|
1974 Plymouth PB300 Van Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 318/360, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, EGR, Idle-5500 RPM, For 4 Barrel Carb, Cast Finish
| Part Number |
Brand |
Price |
|
| E113776 |
Edelbrock |
$320.85 |
|
|
|
|
|
1974 Plymouth PB300 Van Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap 340/360, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, Accepts Early-Style Waterneck Only, With Nitrous Bosses, Cast Finish, Recommend FelPro Gasket Part Number 1213 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117576 |
Edelbrock |
$307.37 |
|
|
|
|
|
1974 Plymouth PB300 Van Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- 0.375 in. -16 x 1 in. socket head; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds.
| Part Number |
Brand |
Price |
|
| G12956G |
Mr Gasket |
$6.04 |
|
|
|
|
|
1974 Plymouth PB300 Van Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Includes twelve 0.375 in. -16 x 1 in. hex head bolts and washers; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G12955G |
Mr Gasket |
$6.72 |
|
|
|
|
|
1974 Plymouth PB300 Van Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Features Twelve Point Smaller-Than-Standard Head And Flange, Includes Twelve .375- 16 x 1' Bolts And Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G126091 |
Mr Gasket |
$17.40 |
|
|
|
|
|
1974 Plymouth PB300 Van Edelbrock Intake Manifold Gasket
EDELBROCK INTAKE MANIFOLD GASKET -- 0.06 in. thickness; 1.17 in. x 2.30 in. port; Features MP-2N Microspore technology that does not use solvents; Has a synthetic fiber composite that is designed to conform to any imperfections on the sealing surface when compressed; Nitrile bead around each port opening makes the seal even better; Designed for use with Edelbrock Performer and Performer RPM cylinder heads and manifolds.
| Part Number |
Brand |
Price |
|
| E117276 |
Edelbrock |
$15.62 |
|
|
|
|
|
1974 Plymouth PB300 Van Mr Gasket Intake Manifold Gasket
MR GASKET INTAKE MANIFOLD GASKET SET, 2 PIECES -- 1.43' x 2.05' Port Dimensions, .0625' Thick, Made From High-Quality Cellulose/Nitrile Composition Gasket Material, Provides Excellent Sealing And Durability, Can Be Trimmed If Needed For Modified Ports, Ideal For OE Replacement, High Performance Street Use, Drag Racing, Or Oval Track Racing, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G12316 |
Mr Gasket |
$11.91 |
|
|
|
|
|
1974 Plymouth PB300 Van Mr Gasket Intake Manifold Gasket
MR GASKET INTAKE MANIFOLD GASKET SET, 2 PIECES -- 1.05' x 2.07' Port Dimensions, .0625 Thick, Made From High-Quality Cellulose/Nitrile Composition Gasket Material, Provides Excellent Sealing And Durability, Can Be Trimmed If Needed For Modified Ports, Ideal For OE Replacement, High Performance Street Use, Drag Racing, Or Oval Track Racing, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G12306G |
Mr Gasket |
$17.40 |
|
|
|
|
|
1974 Plymouth PB300 Van Mr Gasket Intake Manifold Gasket
MR GASKET SUPER ULTRA-SEAL III INTAKE MANIFOLD GASKET SET -- 1.17 in. x 2.27 in. port dimensions, 0.0625 in. thick; BBL stock port; Made from custom-engineered copolymer binder system which holds fibers and fillers together; Reinforced with synthetic fillers to produce a uniform, high-strength composite sealing material; Provides excellent sealing and durability; Can be trimmed if needed for modified ports; Ideal for OE replacement, high performance street use, drag racing, or oval track racing; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G124690G |
Mr Gasket |
$24.37 |
|
|
|
|
|
1974 Plymouth PB300 Van Weiand - Weiand Action Plus Intake Manifold
WEIAND ACTION PLUS SERIES INTAKE MANIFOLD, SATIN FINISH -- Front/Rear Height 4.88/5.94, Port Size 1.96 x 1", Power Band Idle-6000 RPM, Single 4 Barrel Manifold That Features Spread Bore And Square Bore Carburetor Mounting Flange, 180 Degree High-Rise Dual-Plane Manifold, Designed As A Stock Replacement Manifold With Improved Power And Torque Characteristics, Effective RPM Range Idle-5500, Carburetor Mounting Pads Available, Non-EGR Provision
| Part Number |
Brand |
Price |
|
| W208007 |
Weiand |
$217.46 |
|
|
|
|
|
1974 Plymouth PB300 Van Weiand Intake Manifold
WEIAND HI-RAM INTAKE MANIFOLD, SATIN -- Front Height 8.93, Rear Height 9.37, Port Height 2.08%X94, Port Width 1.08, Features A D-Shaped Port Runner Design, Large Plenum Chamber, And Square Bore Carburetor Mounting Flange, Provides Optimum Thrust Of The Air/Fuel Mixture To The Cylinder Head Intake Ports, Engineered To Produce A Power Band That Ranges From 3000 To 9000 RPM
| Part Number |
Brand |
Price |
|
| W201995 |
Weiand |
$494.21 |
|
|
|
|
More Plymouth PB300 Van Air Intake Parts
|
|
|
|
