|
|
1964-1972 Oldsmobile F85 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
 |
| FPMS99471 |
Felpro |
$18.08 |
|
|
|
|
|
1964-1965 Oldsmobile F85 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set.
| Part Number |
Brand |
Price |
|
| FPMS9943 |
Felpro |
$11.49 |
|
|
|
|
|
1968-1971 Oldsmobile F85 Edelbrock Intake Manifold
EDELBROCK PERFORMER OLDS 350 INTAKE MANIFOLD, CAST FINISH -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 2.5 in. Height A, 3.9 in. Height B, 1.18 in. X 1.86 in. Port Exit, Idle-5500 RPM, Dual-Plane Design With Runner Tuning, Designed To Increase Your Vehicles Horsepower And Torque Over A Wide RPM Range, For Non-EGR, Street Legal Part For 307, 350, And 403 V8s With OEM 4-bbl, Includes EGR Block-Off Plate, Factory Cruise Control Will Not Clear EGR Valve Without Linkage Alteration, Use Intake Gasket Fel-Pro MS96027, With Edelbrock's 90-Day Warranty
| Part Number |
Brand |
Price |
|
| E113711 |
Edelbrock |
$283.34 |
|
|
|
|
|
1968-1971 Oldsmobile F85 Edelbrock Intake Manifold
EDELBROCK PERFORMER SERIES MANIFOLD, ALUMINUM, ENDURASHINE, SOLD INDIVIDUALLY -- 50-state legal; Designed for street 307-330-350-403 c.i.d. Oldsmobile V8s, 1966-85; For non-EGR, comes with a universal pad to fit most carburetors with electric chokes For EGR; Use Performer 3701 for stock replacement; Will fit 1980-1/2 to 1985 307 c.i.d. V8s with 5A heads.
| Part Number |
Brand |
Price |
|
| E112711 |
Edelbrock |
$381.33 |
|
|
|
|
|
1961-1963 Oldsmobile F85 Edelbrock - Edelbrock Performer Intake Manifold
EDELBROCK PERFORMER SERIES MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 5 in. A x 5.92 in. B height; 0.88 in. x 1.54 in. port exit; Designed for 1968 and later Rover 3500cc V8s; Also fits 1961-63 Buick and Oldsmobile aluminum 215 c.i.d. V8s; Will not work with stock Stromberg carburetors; Recommended to use Fel-Pro intake gasket part number MS96002.
| Part Number |
Brand |
Price |
|
| E112198 |
Edelbrock |
$240.29 |
|
|
|
|
|
1972 Oldsmobile F85 Professional Products - Professional Products Hurricane Intake Manifold
PROFESSIONAL PRODUCTS HURRICANE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 3000 to 7500 RPM power range; Consistently outperformed all of the well known brands which are also much more expensive; Numerous dyno tests have proven over and over that there is no better manifold of this type for achieving maximum power and torque while actually using less fuel doing it.
| Part Number |
Brand |
Price |
|
| P8952030 |
Professional Products |
$250.85 |
|
|
|
|
|
1972 Oldsmobile F85 Professional Products - Professional Products Hurricane Intake Manifold
PROFESSIONAL PRODUCTS HURRICANE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 3000 to 7500 RPM power range; A single plane 360-degree manifold design that provides optimum power in the mid to upper RPM ranges; Features a standard square bore carb flange, nitrous bosses, dual distributor hold-downs, four corner water ports and a special water flow divider; the ports are specifically positioned to provide an optimum starting point for custom porting.
| Part Number |
Brand |
Price |
|
| P8952031 |
Professional Products |
$185.10 |
|
|
|
|
|
1972 Oldsmobile F85 Professional Products - Professional Products Super Hurricane Intake Manifold
PROFESSIONAL PRODUCTS SUPER HURRICANE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 3000 to 7500 RPM power range; Features a larger plenum and runners than hurricane or hurricane plus; Will outperform other leading intake manifolds from 5200 RPM to 7200 RPM and uses less fuel while making more power; Designed for use on very large small block engines using gas or alcohol or smaller engines running on alcohol.
| Part Number |
Brand |
Price |
|
| P8952036 |
Professional Products |
$286.93 |
|
|
|
|
|
1972 Oldsmobile F85 Professional Products - Professional Products Cyclone Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE INTAKE MANIFOLD, ALUMINUM -- 50-state legal; Idle to 5500 RPM power range; Casted from steel molds which provide a tighter grain casting; A great all-around street manifold for mild performance applications; 100 percent pressure tested for leaks to eliminate installation problems; Set up to accept a spread bore carburetor but comes with an adapter plane that permits the use of square bore carburetors; No EGR provisions.
| Part Number |
Brand |
Price |
|
| P8952001 |
Professional Products |
$146.47 |
|
|
|
|
|
1972 Oldsmobile F85 Professional Products - Professional Products Cyclone Plus Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE PLUS INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; Idle to 5500 RPM power range; 0.38 in. taller and has larger ports and runners than the standard cyclone intake manifold; Produces more power and torque; Features a built-in rear water crossover passage for better water flow and cooler engine operating temperatures, nitrous bosses and rear water ports; Uses a square bore carb flange which permits direct bolt-on of all popular holley carburetors.
| Part Number |
Brand |
Price |
|
| P8952010 |
Professional Products |
$230.59 |
|
|
|
|
|
1972 Oldsmobile F85 Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; Not for exhaust heated or stock style chokes; Will not work on engines with reverse water flow.
| Part Number |
Brand |
Price |
|
| P8952028 |
Professional Products |
$200.85 |
|
|
|
|
|
1972 Oldsmobile F85 Professional Products - Professional Products Cyclone Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; Idle to 5500 RPM power range; Casted from steel molds which provide a tighter grain casting; A great all-around street manifold for mild performance applications; Set up to accept a spread bore carburetor but comes with an adapter plane that permits the use of square bore carburetors; 100 percent pressure tested for leaks to eliminate installation problems; No EGR provisions; For standard heads application.
| Part Number |
Brand |
Price |
|
| P8952000 |
Professional Products |
$193.86 |
|
|
|
|
|
1972 Oldsmobile F85 Professional Products - Professional Products Cyclone Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE INTAKE MANIFOLD, ALUMINUM -- 50-state legal; Idle to 5500 RPM power range; Casted from steel molds which provide a tighter grain casting; A great all-around street manifold for mild performance applications; Set up to accept a spread bore carburetor but comes with an adapter plane that permits the use of square bore carburetors; 100 percent pressure tested for leaks to eliminate installation problems; Features four corner water outlets and dual distributor hold-downs; With EGR provisions; Will work with a late model style water neck, alternator, HEI ignition system and air conditioning brackets.
| Part Number |
Brand |
Price |
|
| P8952009 |
Professional Products |
$163.20 |
|
|
|
|
|
1972 Oldsmobile F85 Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; Not for exhaust heated or stock style chokes; Will not work on engines with reverse water flow.
| Part Number |
Brand |
Price |
|
| P8952027 |
Professional Products |
$263.63 |
|
|
|
|
|
1965-1972 Oldsmobile F85 Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; Dual plane manifold; Features an open area under the plenum chamber that provides a flow of cooling air which keeps the temperature of the air/fuel charge lower to produce more power and torque; With spread bore carb flange and square bore adapter plane and gasket; Has a cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8957026 |
Professional Products |
$274.98 |
|
|
|
|
|
1972 Oldsmobile F85 Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; Not for exhaust heated or stock style chokes; Will not work on engines with reverse water flow.
| Part Number |
Brand |
Price |
|
| P8952026 |
Professional Products |
$193.21 |
|
|
|
|
|
1972 Oldsmobile F85 Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; Not for exhaust heated or stock style chokes; Will not work on engines with reverse water flow.
| Part Number |
Brand |
Price |
|
| P8952025 |
Professional Products |
$255.99 |
|
|
|
|
|
1972 Oldsmobile F85 Professional Products - Professional Products Typhoon Intake Manifold
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; 0.70 in. taller than cyclone intake manifold; A high performance 180-degree dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; will not work on engines with reverse water flow; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8952022 |
Professional Products |
$269.00 |
|
|
|
|
|
1972 Oldsmobile F85 Professional Products - Professional Products Typhoon Intake Manifold
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; 0.70 in. taller than cyclone intake manifold; A high performance 180-degree dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; will not work on engines with reverse water flow; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8952020 |
Professional Products |
$206.27 |
|
|
|
|
|
1972 Oldsmobile F85 Spectre Intake Manifold Bolt Set
SPECTRE INTAKE BOLT AND WASHER SET, 12 PIECES -- 3/8"-16 x 1", Made Of Grade 5 Steel And Zinc Hex Head, With Manufacturer's Limited Warranty
| Part Number |
Brand |
Price |
|
| S714652 |
Spectre |
$2.78 |
|
|
|
|
|
1966-1972 Oldsmobile F85 Felpro Intake & Exhaust Manifold Gasket
FELPRO INTAKE AND EXHAUST MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake and exhaust manifold gasket set.
| Part Number |
Brand |
Price |
|
| FPMS9786 |
Felpro |
$8.31 |
|
|
|
|
|
1965-1972 Oldsmobile F85 Edelbrock Intake Manifold Gasket
EDELBROCK INTAKE MANIFOLD GASKET -- 0.06 in. thickness; 1.44 in. x 2.44 in. port; Features MP-2N Microspore technology that does not use solvents; Has a synthetic fiber composite that is designed to conform to any imperfections on the sealing surface when compressed; Nitrile bead around each port opening makes the seal even better; Designed for use with Edelbrock Performer and Performer RPM cylinder heads and manifolds.
| Part Number |
Brand |
Price |
|
| E117284 |
Edelbrock |
$16.06 |
|
|
|
|
|
1967 Oldsmobile F85 Victor Intake Manifold Gasket
VICTOR INTAKE MANIFOLD GASKET KIT -- A high quality, OE replacement intake manifold gasket kit; Replaces OE numbers MSZ3962, 230108, 230522, 382497, 401447, and 561116.
| Part Number |
Brand |
Price |
|
| VICMS15122 |
Victor |
$25.68 |
|
|
|
|
|
1964-1966 Oldsmobile F85 Victor Intake Manifold Gasket
VICTOR INTAKE MANIFOLD GASKET KIT -- A high quality, OE replacement intake manifold gasket kit; Replaces OE numbers MSZ3962, 230108, 230522, 382497, 401447, and 561116.
| Part Number |
Brand |
Price |
|
| VICMS15122 |
Victor |
$25.68 |
|
|
|
|
|
1972 Oldsmobile F85 Professional Products Intake Manifold Bolt Set
PROFESSIONAL PRODUCTS INTAKE MANIFOLD BOLT SET -- A 12-Point Stainless Steel Intake Manifold Bolt Kit With Polished Wrench Heads For Small Block Installations
| Part Number |
Brand |
Price |
|
| P8952120 |
Professional Products |
$23.12 |
|
|
|
|
|
1965-1972 Oldsmobile F85 Mr Gasket Intake Manifold Gasket
MR GASKET INTAKE MANIFOLD GASKET SET, 2 PIECES -- 1.41'' x 2.49'' Port Dimensions, .0625'' Thick, Made From High-Quality Cellulose/Nitrile Composition Gasket Material, Provides Excellent Sealing And Durability, Can Be Trimmed If Needed For Modified Ports, Ideal For OE Replacement, High Performance Street Use, Drag Racing, Or Oval Track Racing, Includes Side Gaskets Only, Metal Valley Pan Not Included, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G12404 |
Mr Gasket |
$17.41 |
|
|
|
|
|
1964-1972 Oldsmobile F85 Mr Gasket Intake Manifold Gasket
MR GASKET INTAKE MANIFOLD GASKET SET, 2 PIECES -- 1.38' x 2.03' Port Dimensions, .0625' Thick, Made From High-Quality Cellulose/Nitrile Composition Gasket Material, Provides Excellent Sealing And Durability, Can Be Trimmed If Needed For Modified Ports, Ideal For OE Replacement, High Performance Street Use, Drag Racing, Or Oval Track Racing, Includes Side Gaskets Only, Metal Valley Pan Not Included, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G12405G |
Mr Gasket |
$16.53 |
|
|
|
|
|
1970-1972 Oldsmobile F85 Mr Gasket Intake Manifold Gasket
MR GASKET SUPER ULTRA-SEAL III INTAKE MANIFOLD GASKET SET -- 1.41 in. x 2.49 in. port dimensions, 0.0625 in. thick; Stock port; Made from custom-engineered copolymer binder system which holds fibers and fillers together; Reinforced with synthetic fillers to produce a uniform, high-strength composite sealing material; Provides excellent sealing and durability; Can be trimmed if needed for modified ports; Ideal for OE replacement, high performance street use, drag racing, or oval track racing; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G124695G |
Mr Gasket |
$24.37 |
|
|
|
|
|
1968-1972 Oldsmobile F85 Mr Gasket Intake Manifold Gasket
MR GASKET SUPER ULTRA-SEAL III INTAKE MANIFOLD GASKET SET -- 1.38 in. x 2.03 in. port dimensions, 0.0625 in. thick; Stock port; Made from custom-engineered copolymer binder system which holds fibers and fillers together; Reinforced with synthetic fillers to produce a uniform, high-strength composite sealing material; Provides excellent sealing and durability; Can be trimmed if needed for modified ports; Ideal for OE replacement, high performance street use, drag racing, or oval track racing; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G124694G |
Mr Gasket |
$24.37 |
|
|
|
|
|
1964-1969 Oldsmobile F85 Edelbrock Intake Manifold Bolt Set
EDELBROCK INTAKE MANIFOLD BOLT KIT -- Includes cadmium finished steel bolts and hardened washers; Feature reduced hex heads for easy wrench access; Designed specifically for use with Edelbrock part numbers 2711 and 3711.
| Part Number |
Brand |
Price |
|
| E118514 |
Edelbrock |
$22.16 |
|
|
