|
|
1997 Oldsmobile Cutlass Supreme Replacement Intake Manifold Gasket
INTAKE MANIFOLD GASKETS, RUBBER, SET OF 4 -- Includes upper set; With push rod guides on intake gasket; A high quality, OE replacement intake manifold gasket set; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
 |
| REPB312401 |
Replacement |
$27.01 |
|
|
|
|
|
1995-1996 Oldsmobile Cutlass Supreme Replacement Intake Manifold Gasket
INTAKE MANIFOLD GASKETS, RUBBER, SET OF 4 -- Includes upper set; With push rod guides on intake gasket; A high quality, OE replacement intake manifold gasket set; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| REPB312401 |
Replacement |
$27.01 |
|
|
|
|
1997 Oldsmobile Cutlass Supreme Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Includes upper set; A high quality, direct fit OE replacement intake manifold gasket set; Second design with push rod guides on intake gasket.
| Part Number |
Brand |
Price |
|
| FPMS90562 |
Felpro |
$43.39 |
|
|
|
|
|
1995-1996 Oldsmobile Cutlass Supreme Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Includes upper set; A high quality, direct fit OE replacement intake manifold gasket set; Second design with push rod guides on intake gasket.
| Part Number |
Brand |
Price |
|
| FPMS90562 |
Felpro |
$43.39 |
|
|
|
|
|
1995-1996 Oldsmobile Cutlass Supreme Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Includes upper set; A high quality, direct fit OE replacement intake manifold gasket set; First design without push rod guides on intake gasket with ball and pivot rocker arms.
| Part Number |
Brand |
Price |
|
| FPMS95536 |
Felpro |
$32.74 |
|
|
|
|
|
1993-1994 Oldsmobile Cutlass Supreme Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Includes upper set; A high quality, direct fit OE replacement intake manifold gasket set; First design without push rod guides on intake gasket with ball and pivot rocker arms.
| Part Number |
Brand |
Price |
|
| FPMS95536 |
Felpro |
$32.74 |
|
|
|
|
|
1987 Oldsmobile Cutlass Supreme Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS93317 |
Felpro |
$14.08 |
|
|
|
|
|
1978-1986 Oldsmobile Cutlass Supreme Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS903142 |
Felpro |
$10.67 |
|
|
|
|
|
1979-1984 Oldsmobile Cutlass Supreme Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS96033 |
Felpro |
$25.49 |
|
|
|
|
|
1993-1997 Oldsmobile Cutlass Supreme Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Perma dry plus; A high quality, direct fit OE replacement intake manifold gasket set.
| Part Number |
Brand |
Price |
|
| FPMS98004T |
Felpro |
$82.78 |
|
|
|
|
|
1995-1996 Oldsmobile Cutlass Supreme Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Perma dry plus; A high quality, direct fit OE replacement intake manifold gasket set.
| Part Number |
Brand |
Price |
|
| FPMS98004T |
Felpro |
$82.78 |
|
|
|
|
|
1996 Oldsmobile Cutlass Supreme Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Upper Set Included, Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS95804 |
Felpro |
$41.18 |
|
|
|
|
|
1995 Oldsmobile Cutlass Supreme Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Perma dry plus; A high quality, direct fit OE replacement intake manifold gasket set.
| Part Number |
Brand |
Price |
|
| FPMS98004T |
Felpro |
$82.78 |
|
|
|
|
|
1991-1995 Oldsmobile Cutlass Supreme Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Upper Set Included, Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS95822 |
Felpro |
$23.45 |
|
|
|
|
|
1991-1993 Oldsmobile Cutlass Supreme Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Includes upper set; Valley pan; A high quality, direct fit OE replacement intake manifold gasket set.
| Part Number |
Brand |
Price |
|
| FPMS96046 |
Felpro |
$26.42 |
|
|
|
|
|
1990-1991 Oldsmobile Cutlass Supreme Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS90573 |
Felpro |
$7.77 |
|
|
|
|
|
1984-1987 Oldsmobile Cutlass Supreme Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS96037 |
Felpro |
$21.24 |
|
|
|
|
|
1981-1985 Oldsmobile Cutlass Supreme Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- With Internal EGR, With 2 Stud Air Cleaner, Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS92328 |
Felpro |
$21.97 |
|
|
|
|
|
1979-1981 Oldsmobile Cutlass Supreme Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Includes external EGR and one stud air cleaner; A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS99472 |
Felpro |
$21.52 |
|
|
|
|
|
1978 Oldsmobile Cutlass Supreme Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- With freeze plugs on ends of heads; A high quality, direct fit OE replacement intake manifold gasket set; Even firing; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS96032 |
Felpro |
$30.02 |
|
|
|
|
|
1967-1972 Oldsmobile Cutlass Supreme Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS99471 |
Felpro |
$18.08 |
|
|
|
|
|
1967-1985 Oldsmobile Cutlass Supreme Edelbrock Intake Manifold
EDELBROCK PERFORMER OLDS 350 INTAKE MANIFOLD, CAST FINISH -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 2.5 in. Height A, 3.9 in. Height B, 1.18 in. X 1.86 in. Port Exit, Idle-5500 RPM, Dual-Plane Design With Runner Tuning, Designed To Increase Your Vehicles Horsepower And Torque Over A Wide RPM Range, For Non-EGR, Street Legal Part For 307, 350, And 403 V8s With OEM 4-bbl, Includes EGR Block-Off Plate, Factory Cruise Control Will Not Clear EGR Valve Without Linkage Alteration, Use Intake Gasket Fel-Pro MS96027, With Edelbrock's 90-Day Warranty
| Part Number |
Brand |
Price |
|
| E113711 |
Edelbrock |
$283.34 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Supreme Edelbrock - Edelbrock Thunder Intake Manifold
EDELBROCK PERFORMER EPS INTAKE MANIFOLD -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Non-EGR, A Dual-Plane Manifold That Is Optimized To Deliver Superior Performance With Edelbrock Square-Bore Performer Series Or Thunder Series AVS Carburetors, Has A Runner Design That Is Tuned For Peak Torque Around 3500 RPM On A 350-Inch Engine And It Is Ideal For Power From Off-Idle To 5500 RPM, Dyno Tested To Increase Power By Up To 5 Hp And 9 lb.-ft. of Torque Over The Edelbrock Performer Manifold 2101, Can Be Matched With A Dependable Edelbrock Square-Bore Carburetor For Maximum Performance Gains
| Part Number |
Brand |
Price |
|
| E112701 |
Edelbrock |
$173.59 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Supreme Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, EGR, Idle-5500 RPM, Cast Finish, Recommended Gaskets FelPro Gasket Part number 1256 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E113701 |
Edelbrock |
$194.67 |
|
|
|
|
|
1967-1985 Oldsmobile Cutlass Supreme Edelbrock Intake Manifold
EDELBROCK PERFORMER SERIES MANIFOLD, ALUMINUM, ENDURASHINE, SOLD INDIVIDUALLY -- 50-state legal; Designed for street 307-330-350-403 c.i.d. Oldsmobile V8s, 1966-85; For non-EGR, comes with a universal pad to fit most carburetors with electric chokes For EGR; Use Performer 3701 for stock replacement; Will fit 1980-1/2 to 1985 307 c.i.d. V8s with 5A heads.
| Part Number |
Brand |
Price |
|
| E112711 |
Edelbrock |
$381.33 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Supreme Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For Square-Bore Carbs, Cast Finish, Recommend FelPro Gasket Part Number 1205 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117501 |
Edelbrock |
$264.52 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Supreme Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For OEM 4 Barrel Or Edelbrock Carb, Polished Finish, Recommend FelPro Gasket Part number 1256 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121011 |
Edelbrock |
$313.77 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Supreme Edelbrock Intake Manifold
EDELBROCK RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 1500 to 6500 rpm; 5.05 in. x 5.64 in. height; 5.35 in. carburetor pad height; 0.98 x 2.72 in. port exit; Non-EGR; Includes timing control module; Delivers outstanding performance and broad torque band throughout its rpm range; Designed for LS1 engines.
| Part Number |
Brand |
Price |
|
| E117525 |
Edelbrock |
$371.08 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Supreme Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer EPS, Intake Manifold, Produces Peak Torque Increases At 3500 RPM, Power Where You Can Use It Daily, Non-EGR, Idle-5500 RPM, Polished Finish, Recommended Gaskets FelPro Gasket Part number 1256 for
| Part Number |
Brand |
Price |
|
| E1127011 |
Edelbrock |
$283.94 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Supreme Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer EPS, Intake Manifold, Produces Peak Torque Increases At 3500 RPM, Power Where You Can Use It Daily, Non-EGR, Idle-5500 RPM, Endurashine, Recommended Gaskets FelPro Gasket Part number 1256
| Part Number |
Brand |
Price |
|
| E1127014 |
Edelbrock |
$226.02 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Supreme Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For Square-Bore Carbs, Polished Finish, Recommend FelPro Gasket Part Number 1205 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1175011 |
Edelbrock |
$413.45 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Supreme Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, EGR, Idle-5500 RPM, Cast Finish, Use OE Gasket Part number GM10159409 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E113706 |
Edelbrock |
$257.33 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Supreme Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; C357-B Three-Deuce, Intake Manifold, Includes Front Oil Filler Boss, Exhaust Heat Riser, Carb Center To Carb Center 5.5, Non-EGR, Idle-5500 RPM, Use Edelbrock Camshaft Kit Part number 213 For Low-Torque Needs, Part number 52 For Top-End Power, Recommend Edelbrock Intake Gasket Kit Part number 721 Or Fel-Pro Part number 1256
| Part Number |
Brand |
Price |
|
| E115419 |
Edelbrock |
$329.45 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Supreme Edelbrock - Edelbrock Performer EPS Intake Manifold
EDELBROCK PERFORMER EPS MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Provides up to 5 h.p. and 9 lb.-ft. of torque; Optimized for maximum power from idle to 5500 rpm; 3.74 in. A x 4.80 in. B height; 1.15 x 1.87 in. port exit; Includes oil fill tube and matching push-in breather cap; Dual-plane manifold; Non-EGR; Optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors.
| Part Number |
Brand |
Price |
|
| E1127034 |
Edelbrock |
$258.61 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Supreme Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For OEM 4 Barrel Or Edelbrock Carb, Cast Finish, Recommend FelPro Gasket Part number 1256 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E112101 |
Edelbrock |
$157.86 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Supreme Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For Square-Bore Carbs, Endurashine Chrome, Recommend FelPro Gasket Part Number 1205 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1175014 |
Edelbrock |
$382.40 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Supreme Edelbrock - Edelbrock Performer EPS Intake Manifold
EDELBROCK PERFORMER EPS MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Provides up to 5 h.p. and 5 lb.-ft. of torque at up to 4500 rpm; 3.74 in. A x 4.80 in. B height; 1.15 x 1.87 in. port exit; Includes oil fill tube and matching push-in breather cap; Dual-plane manifold; Non-EGR; Optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder AVS series carburetors; Features modern runner design for those who want the vintage look of Edelbrock classic valve covers with no breathers; Recommended to use Edelbrock intake gasket part number 7201.
| Part Number |
Brand |
Price |
|
| E112703 |
Edelbrock |
$182.16 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Supreme Edelbrock Intake Manifold
EDELBROCK RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Designed for street 396-502 c.i.d. Chevy V8s with large oval-port cylinder heads, 1975 and earlier; Incorporates the same race-winning technology that been used on our Victor Series competition intakes for years; Features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power; Includes rear water outlets, two distributor clamp locations and nitrous bosses; Accepts all late model alternator and A/C brackets for the street; For square bore carburetors only; No provision for exhaust heated chokes and no exhaust crossover; Will not fit under stock hood of Corvette, 1965-67 Chevelle or 1967-81 Camaro.
| Part Number |
Brand |
Price |
|
| E1154251 |
Edelbrock |
$575.37 |
|
|
|
|
|
1978 Oldsmobile Cutlass Supreme Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Street Tunnel Ram, Dual Quad, Intake Manifold, Designed For Maximum Top End Power, EGR, 3500-7500rpm, Cast Finish, Use Edelbrock Camshaft Kit Part Number 5002 For Low-Torque Needs, Part Number 7102 For Top-End Power, Recommend FelPro Gasket Part Number 1205 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117110 |
Edelbrock |
$428.04 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Supreme Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- 0.375 in. -16 x 1 in. socket head; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds.
| Part Number |
Brand |
Price |
|
| G12956G |
Mr Gasket |
$6.04 |
|
|
|
|
1978-1980 Oldsmobile Cutlass Supreme Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .375-16 x 1 Hex Head Bolts And Twelve .375" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125002 |
Mr Gasket |
$23.50 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Supreme Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Includes twelve 0.375 in. -16 x 1 in. hex head bolts and washers; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G12955G |
Mr Gasket |
$6.72 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Supreme Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .375-16 x 1 Point Head Bolts And Twelve .375" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125003 |
Mr Gasket |
$34.84 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Supreme Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Features Twelve Point Smaller-Than-Standard Head And Flange, Includes Twelve .375- 16 x 1' Bolts And Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G126091 |
Mr Gasket |
$17.40 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Supreme Mr Gasket Intake Manifold Bolt Set
MR GASKET SUPER INTAKE MANIFOLD BOLT KIT, BLACK OXIDE COATED -- 3/8"-16 X 1-1/16", Consists Of 12 Bolts And Washers, Made From Grade 5 Steel For Strength And Durability, Black Oxide Coated To Resist Corrosion And Provide A Clean Professional Appearance, Features A Wide Washer Face Hex Head To Spread Clamp Force Evenly For A Positive Seal, Comes With Extra Thick Flat Washers That Provide Uniform Clamp Load And Prevent Galling On Aluminum Intake Manifolds, With Mr. Gasket's Limited Warranty
| Part Number |
Brand |
Price |
|
| G126080 |
Mr Gasket |
$14.31 |
|
|
|
|
|
1972-1980 Oldsmobile Cutlass Supreme Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; Not for exhaust heated or stock style chokes; Will not work on engines with reverse water flow.
| Part Number |
Brand |
Price |
|
| P8952026 |
Professional Products |
$193.21 |
|
|
|
|
|
1972-1980 Oldsmobile Cutlass Supreme Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; Not for exhaust heated or stock style chokes; Will not work on engines with reverse water flow.
| Part Number |
Brand |
Price |
|
| P8952027 |
Professional Products |
$263.63 |
|
|
|
|
|
1972-1980 Oldsmobile Cutlass Supreme Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; Not for exhaust heated or stock style chokes; Will not work on engines with reverse water flow.
| Part Number |
Brand |
Price |
|
| P8952028 |
Professional Products |
$200.85 |
|
|
|
|
|
1972-1980 Oldsmobile Cutlass Supreme Professional Products - Professional Products Hurricane Intake Manifold
PROFESSIONAL PRODUCTS HURRICANE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 3000 to 7500 RPM power range; Consistently outperformed all of the well known brands which are also much more expensive; Numerous dyno tests have proven over and over that there is no better manifold of this type for achieving maximum power and torque while actually using less fuel doing it.
| Part Number |
Brand |
Price |
|
| P8952030 |
Professional Products |
$250.85 |
|
|
|
|
|
1972-1980 Oldsmobile Cutlass Supreme Professional Products - Professional Products Cyclone Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE INTAKE MANIFOLD, ALUMINUM -- 50-state legal; Idle to 5500 RPM power range; Casted from steel molds which provide a tighter grain casting; A great all-around street manifold for mild performance applications; Set up to accept a spread bore carburetor but comes with an adapter plane that permits the use of square bore carburetors; 100 percent pressure tested for leaks to eliminate installation problems; Features four corner water outlets and dual distributor hold-downs; With EGR provisions; Will work with a late model style water neck, alternator, HEI ignition system and air conditioning brackets.
| Part Number |
Brand |
Price |
|
| P8952009 |
Professional Products |
$163.20 |
|
|
