|
|
|
|
Intake Manifold Oldsmobile Cutlass Salon |
|
|
1979-1981 Oldsmobile Cutlass Salon Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
 |
| FPMS96033 |
Felpro |
$25.49 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Salon Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS903142 |
Felpro |
$10.67 |
|
|
|
|
|
1985-1987 Oldsmobile Cutlass Salon Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS96037 |
Felpro |
$21.24 |
|
|
|
|
|
1981-1985 Oldsmobile Cutlass Salon Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- With Internal EGR, With 2 Stud Air Cleaner, Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS92328 |
Felpro |
$21.97 |
|
|
|
|
|
1979-1981 Oldsmobile Cutlass Salon Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Includes external EGR and one stud air cleaner; A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS99472 |
Felpro |
$21.52 |
|
|
|
|
|
1978 Oldsmobile Cutlass Salon Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- With freeze plugs on ends of heads; A high quality, direct fit OE replacement intake manifold gasket set; Even firing; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS96032 |
Felpro |
$30.02 |
|
|
|
|
|
1976-1985 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
EDELBROCK PERFORMER OLDS 350 INTAKE MANIFOLD, CAST FINISH -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 2.5 in. Height A, 3.9 in. Height B, 1.18 in. X 1.86 in. Port Exit, Idle-5500 RPM, Dual-Plane Design With Runner Tuning, Designed To Increase Your Vehicles Horsepower And Torque Over A Wide RPM Range, For Non-EGR, Street Legal Part For 307, 350, And 403 V8s With OEM 4-bbl, Includes EGR Block-Off Plate, Factory Cruise Control Will Not Clear EGR Valve Without Linkage Alteration, Use Intake Gasket Fel-Pro MS96027, With Edelbrock's 90-Day Warranty
| Part Number |
Brand |
Price |
|
| E113711 |
Edelbrock |
$283.34 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Salon Edelbrock - Edelbrock Thunder Intake Manifold
EDELBROCK PERFORMER EPS INTAKE MANIFOLD -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Non-EGR, A Dual-Plane Manifold That Is Optimized To Deliver Superior Performance With Edelbrock Square-Bore Performer Series Or Thunder Series AVS Carburetors, Has A Runner Design That Is Tuned For Peak Torque Around 3500 RPM On A 350-Inch Engine And It Is Ideal For Power From Off-Idle To 5500 RPM, Dyno Tested To Increase Power By Up To 5 Hp And 9 lb.-ft. of Torque Over The Edelbrock Performer Manifold 2101, Can Be Matched With A Dependable Edelbrock Square-Bore Carburetor For Maximum Performance Gains
| Part Number |
Brand |
Price |
|
| E112701 |
Edelbrock |
$173.59 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, EGR, Idle-5500 RPM, Cast Finish, Recommended Gaskets FelPro Gasket Part number 1256 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E113701 |
Edelbrock |
$194.67 |
|
|
|
|
|
1978 Oldsmobile Cutlass Salon Edelbrock - Edelbrock Thunder Intake Manifold
EDELBROCK PERFORMER EPS INTAKE MANIFOLD -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Non-EGR, A Dual-Plane Manifold That Is Optimized To Deliver Superior Performance With Edelbrock Square-Bore Performer Series Or Thunder Series AVS Carburetors, Has A Runner Design That Is Tuned For Peak Torque Around 3500 RPM On A 350-Inch Engine And It Is Ideal For Power From Off-Idle To 5500 RPM, Dyno Tested To Increase Power By Up To 5 Hp And 9 lb.-ft. of Torque Over The Edelbrock Performer Manifold 2101, Can Be Matched With A Dependable Edelbrock Square-Bore Carburetor For Maximum Performance Gains
| Part Number |
Brand |
Price |
|
| E112701 |
Edelbrock |
$173.59 |
|
|
|
|
|
1978 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, EGR, Idle-5500 RPM, Cast Finish, Recommended Gaskets FelPro Gasket Part number 1256 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E113701 |
Edelbrock |
$194.67 |
|
|
|
|
|
1976-1985 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
EDELBROCK PERFORMER SERIES MANIFOLD, ALUMINUM, ENDURASHINE, SOLD INDIVIDUALLY -- 50-state legal; Designed for street 307-330-350-403 c.i.d. Oldsmobile V8s, 1966-85; For non-EGR, comes with a universal pad to fit most carburetors with electric chokes For EGR; Use Performer 3701 for stock replacement; Will fit 1980-1/2 to 1985 307 c.i.d. V8s with 5A heads.
| Part Number |
Brand |
Price |
|
| E112711 |
Edelbrock |
$381.33 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For OEM 4 Barrel Or Edelbrock Carb, Polished Finish, Recommend FelPro Gasket Part number 1256 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121011 |
Edelbrock |
$313.77 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For OEM 4 Barrel Or Edelbrock Carb, Cast Finish, Recommend FelPro Gasket Part number 1256 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E112101 |
Edelbrock |
$157.86 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Salon Edelbrock - Edelbrock Performer EPS Intake Manifold
EDELBROCK PERFORMER EPS MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Provides up to 5 h.p. and 9 lb.-ft. of torque; Optimized for maximum power from idle to 5500 rpm; 3.74 in. A x 4.80 in. B height; 1.15 x 1.87 in. port exit; Includes oil fill tube and matching push-in breather cap; Dual-plane manifold; Non-EGR; Optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors.
| Part Number |
Brand |
Price |
|
| E1127034 |
Edelbrock |
$258.61 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
EDELBROCK RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 1500 to 6500 rpm; 5.05 in. x 5.64 in. height; 5.35 in. carburetor pad height; 0.98 x 2.72 in. port exit; Non-EGR; Includes timing control module; Delivers outstanding performance and broad torque band throughout its rpm range; Designed for LS1 engines.
| Part Number |
Brand |
Price |
|
| E117525 |
Edelbrock |
$371.08 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For Square-Bore Carbs, Polished Finish, Recommend FelPro Gasket Part Number 1205 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1175011 |
Edelbrock |
$413.45 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Salon Edelbrock - Edelbrock Performer EPS Intake Manifold
EDELBROCK PERFORMER EPS MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Provides up to 5 h.p. and 5 lb.-ft. of torque at up to 4500 rpm; 3.74 in. A x 4.80 in. B height; 1.15 x 1.87 in. port exit; Includes oil fill tube and matching push-in breather cap; Dual-plane manifold; Non-EGR; Optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder AVS series carburetors; Features modern runner design for those who want the vintage look of Edelbrock classic valve covers with no breathers; Recommended to use Edelbrock intake gasket part number 7201.
| Part Number |
Brand |
Price |
|
| E112703 |
Edelbrock |
$182.16 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
EDELBROCK RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Designed for street 396-502 c.i.d. Chevy V8s with large oval-port cylinder heads, 1975 and earlier; Incorporates the same race-winning technology that been used on our Victor Series competition intakes for years; Features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power; Includes rear water outlets, two distributor clamp locations and nitrous bosses; Accepts all late model alternator and A/C brackets for the street; For square bore carburetors only; No provision for exhaust heated chokes and no exhaust crossover; Will not fit under stock hood of Corvette, 1965-67 Chevelle or 1967-81 Camaro.
| Part Number |
Brand |
Price |
|
| E1154251 |
Edelbrock |
$575.37 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer EPS, Intake Manifold, Produces Peak Torque Increases At 3500 RPM, Power Where You Can Use It Daily, Non-EGR, Idle-5500 RPM, Polished Finish, Recommended Gaskets FelPro Gasket Part number 1256 for
| Part Number |
Brand |
Price |
|
| E1127011 |
Edelbrock |
$283.94 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, EGR, Idle-5500 RPM, Cast Finish, Use OE Gasket Part number GM10159409 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E113706 |
Edelbrock |
$257.33 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer EPS, Intake Manifold, Produces Peak Torque Increases At 3500 RPM, Power Where You Can Use It Daily, Non-EGR, Idle-5500 RPM, Endurashine, Recommended Gaskets FelPro Gasket Part number 1256
| Part Number |
Brand |
Price |
|
| E1127014 |
Edelbrock |
$226.02 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For Square-Bore Carbs, Endurashine Chrome, Recommend FelPro Gasket Part Number 1205 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1175014 |
Edelbrock |
$382.40 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; C357-B Three-Deuce, Intake Manifold, Includes Front Oil Filler Boss, Exhaust Heat Riser, Carb Center To Carb Center 5.5, Non-EGR, Idle-5500 RPM, Use Edelbrock Camshaft Kit Part number 213 For Low-Torque Needs, Part number 52 For Top-End Power, Recommend Edelbrock Intake Gasket Kit Part number 721 Or Fel-Pro Part number 1256
| Part Number |
Brand |
Price |
|
| E115419 |
Edelbrock |
$329.45 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For Square-Bore Carbs, Cast Finish, Recommend FelPro Gasket Part Number 1205 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117501 |
Edelbrock |
$264.52 |
|
|
|
|
|
1978 Oldsmobile Cutlass Salon Edelbrock - Edelbrock Performer EPS Intake Manifold
EDELBROCK PERFORMER EPS MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Provides up to 5 h.p. and 5 lb.-ft. of torque at up to 4500 rpm; 3.74 in. A x 4.80 in. B height; 1.15 x 1.87 in. port exit; Includes oil fill tube and matching push-in breather cap; Dual-plane manifold; Non-EGR; Optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder AVS series carburetors; Features modern runner design for those who want the vintage look of Edelbrock classic valve covers with no breathers; Recommended to use Edelbrock intake gasket part number 7201.
| Part Number |
Brand |
Price |
|
| E112703 |
Edelbrock |
$182.16 |
|
|
|
|
|
1978 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For OEM 4 Barrel Or Edelbrock Carb, Polished Finish, Recommend FelPro Gasket Part number 1256 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121011 |
Edelbrock |
$313.77 |
|
|
|
|
|
1978 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
EDELBROCK RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Designed for street 396-502 c.i.d. Chevy V8s with large oval-port cylinder heads, 1975 and earlier; Incorporates the same race-winning technology that been used on our Victor Series competition intakes for years; Features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power; Includes rear water outlets, two distributor clamp locations and nitrous bosses; Accepts all late model alternator and A/C brackets for the street; For square bore carburetors only; No provision for exhaust heated chokes and no exhaust crossover; Will not fit under stock hood of Corvette, 1965-67 Chevelle or 1967-81 Camaro.
| Part Number |
Brand |
Price |
|
| E1154251 |
Edelbrock |
$575.37 |
|
|
|
|
|
1978 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer EPS, Intake Manifold, Produces Peak Torque Increases At 3500 RPM, Power Where You Can Use It Daily, Non-EGR, Idle-5500 RPM, Polished Finish, Recommended Gaskets FelPro Gasket Part number 1256 for
| Part Number |
Brand |
Price |
|
| E1127011 |
Edelbrock |
$283.94 |
|
|
|
|
|
1978 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For OEM 4 Barrel Or Edelbrock Carb, Cast Finish, Recommend FelPro Gasket Part number 1256 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E112101 |
Edelbrock |
$157.86 |
|
|
|
|
|
1978 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, EGR, Idle-5500 RPM, Cast Finish, Use OE Gasket Part number GM10159409 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E113706 |
Edelbrock |
$257.33 |
|
|
|
|
|
1978 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer EPS, Intake Manifold, Produces Peak Torque Increases At 3500 RPM, Power Where You Can Use It Daily, Non-EGR, Idle-5500 RPM, Endurashine, Recommended Gaskets FelPro Gasket Part number 1256
| Part Number |
Brand |
Price |
|
| E1127014 |
Edelbrock |
$226.02 |
|
|
|
|
|
1978 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For Square-Bore Carbs, Endurashine Chrome, Recommend FelPro Gasket Part Number 1205 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1175014 |
Edelbrock |
$382.40 |
|
|
|
|
|
1978 Oldsmobile Cutlass Salon Edelbrock - Edelbrock Performer EPS Intake Manifold
EDELBROCK PERFORMER EPS MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Provides up to 5 h.p. and 9 lb.-ft. of torque; Optimized for maximum power from idle to 5500 rpm; 3.74 in. A x 4.80 in. B height; 1.15 x 1.87 in. port exit; Includes oil fill tube and matching push-in breather cap; Dual-plane manifold; Non-EGR; Optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors.
| Part Number |
Brand |
Price |
|
| E1127034 |
Edelbrock |
$258.61 |
|
|
|
|
|
1978 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
EDELBROCK RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 1500 to 6500 rpm; 5.05 in. x 5.64 in. height; 5.35 in. carburetor pad height; 0.98 x 2.72 in. port exit; Non-EGR; Includes timing control module; Delivers outstanding performance and broad torque band throughout its rpm range; Designed for LS1 engines.
| Part Number |
Brand |
Price |
|
| E117525 |
Edelbrock |
$371.08 |
|
|
|
|
|
1978 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; C357-B Three-Deuce, Intake Manifold, Includes Front Oil Filler Boss, Exhaust Heat Riser, Carb Center To Carb Center 5.5, Non-EGR, Idle-5500 RPM, Use Edelbrock Camshaft Kit Part number 213 For Low-Torque Needs, Part number 52 For Top-End Power, Recommend Edelbrock Intake Gasket Kit Part number 721 Or Fel-Pro Part number 1256
| Part Number |
Brand |
Price |
|
| E115419 |
Edelbrock |
$329.45 |
|
|
|
|
|
1978 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For Square-Bore Carbs, Polished Finish, Recommend FelPro Gasket Part Number 1205 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1175011 |
Edelbrock |
$413.45 |
|
|
|
|
|
1978 Oldsmobile Cutlass Salon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For Square-Bore Carbs, Cast Finish, Recommend FelPro Gasket Part Number 1205 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117501 |
Edelbrock |
$264.52 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Salon Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Includes twelve 0.375 in. -16 x 1 in. hex head bolts and washers; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G12955G |
Mr Gasket |
$6.72 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Salon Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- 0.375 in. -16 x 1 in. socket head; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds.
| Part Number |
Brand |
Price |
|
| G12956G |
Mr Gasket |
$6.04 |
|
|
|
|
1978-1980 Oldsmobile Cutlass Salon Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .375-16 x 1 Hex Head Bolts And Twelve .375" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125002 |
Mr Gasket |
$23.50 |
|
|
|
|
|
1978 Oldsmobile Cutlass Salon Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .375-16 x 1 Hex Head Bolts And Twelve .375" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125002 |
Mr Gasket |
$23.50 |
|
|
|
|
|
1978 Oldsmobile Cutlass Salon Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Includes twelve 0.375 in. -16 x 1 in. hex head bolts and washers; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G12955G |
Mr Gasket |
$6.72 |
|
|
|
|
|
1978 Oldsmobile Cutlass Salon Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- 0.375 in. -16 x 1 in. socket head; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds.
| Part Number |
Brand |
Price |
|
| G12956G |
Mr Gasket |
$6.04 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Salon Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .375-16 x 1 Point Head Bolts And Twelve .375" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125003 |
Mr Gasket |
$34.84 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Salon Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Features Twelve Point Smaller-Than-Standard Head And Flange, Includes Twelve .375- 16 x 1' Bolts And Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G126091 |
Mr Gasket |
$17.40 |
|
|
|
|
|
1978-1980 Oldsmobile Cutlass Salon Mr Gasket Intake Manifold Bolt Set
MR GASKET SUPER INTAKE MANIFOLD BOLT KIT, BLACK OXIDE COATED -- 3/8"-16 X 1-1/16", Consists Of 12 Bolts And Washers, Made From Grade 5 Steel For Strength And Durability, Black Oxide Coated To Resist Corrosion And Provide A Clean Professional Appearance, Features A Wide Washer Face Hex Head To Spread Clamp Force Evenly For A Positive Seal, Comes With Extra Thick Flat Washers That Provide Uniform Clamp Load And Prevent Galling On Aluminum Intake Manifolds, With Mr. Gasket's Limited Warranty
| Part Number |
Brand |
Price |
|
| G126080 |
Mr Gasket |
$14.31 |
|
|
|
|
|
1978 Oldsmobile Cutlass Salon Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .375-16 x 1 Point Head Bolts And Twelve .375" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125003 |
Mr Gasket |
$34.84 |
|
|
|
|
|
1978 Oldsmobile Cutlass Salon Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Features Twelve Point Smaller-Than-Standard Head And Flange, Includes Twelve .375- 16 x 1' Bolts And Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G126091 |
Mr Gasket |
$17.40 |
|
|
|
|
|
1978 Oldsmobile Cutlass Salon Mr Gasket Intake Manifold Bolt Set
MR GASKET SUPER INTAKE MANIFOLD BOLT KIT, BLACK OXIDE COATED -- 3/8"-16 X 1-1/16", Consists Of 12 Bolts And Washers, Made From Grade 5 Steel For Strength And Durability, Black Oxide Coated To Resist Corrosion And Provide A Clean Professional Appearance, Features A Wide Washer Face Hex Head To Spread Clamp Force Evenly For A Positive Seal, Comes With Extra Thick Flat Washers That Provide Uniform Clamp Load And Prevent Galling On Aluminum Intake Manifolds, With Mr. Gasket's Limited Warranty
| Part Number |
Brand |
Price |
|
| G126080 |
Mr Gasket |
$14.31 |
|
|
|
|
More Oldsmobile Cutlass Salon Air Intake Parts
|
|
|
|
