|
|
1964-1971 Oldsmobile 442 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
 |
| FPMS99471 |
Felpro |
$18.08 |
|
|
|
|
|
1968-1970 Oldsmobile 442 Edelbrock Intake Manifold
EDELBROCK PERFORMER OLDS 350 INTAKE MANIFOLD, CAST FINISH -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 2.5 in. Height A, 3.9 in. Height B, 1.18 in. X 1.86 in. Port Exit, Idle-5500 RPM, Dual-Plane Design With Runner Tuning, Designed To Increase Your Vehicles Horsepower And Torque Over A Wide RPM Range, For Non-EGR, Street Legal Part For 307, 350, And 403 V8s With OEM 4-bbl, Includes EGR Block-Off Plate, Factory Cruise Control Will Not Clear EGR Valve Without Linkage Alteration, Use Intake Gasket Fel-Pro MS96027, With Edelbrock's 90-Day Warranty
| Part Number |
Brand |
Price |
|
| E113711 |
Edelbrock |
$283.34 |
|
|
|
|
|
1968-1970 Oldsmobile 442 Edelbrock Intake Manifold
EDELBROCK PERFORMER SERIES MANIFOLD, ALUMINUM, ENDURASHINE, SOLD INDIVIDUALLY -- 50-state legal; Designed for street 307-330-350-403 c.i.d. Oldsmobile V8s, 1966-85; For non-EGR, comes with a universal pad to fit most carburetors with electric chokes For EGR; Use Performer 3701 for stock replacement; Will fit 1980-1/2 to 1985 307 c.i.d. V8s with 5A heads.
| Part Number |
Brand |
Price |
|
| E112711 |
Edelbrock |
$381.33 |
|
|
|
|
|
1965-1971 Oldsmobile 442 Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; Dual plane manifold; Features an open area under the plenum chamber that provides a flow of cooling air which keeps the temperature of the air/fuel charge lower to produce more power and torque; With spread bore carb flange and square bore adapter plane and gasket; Has a cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8957026 |
Professional Products |
$274.98 |
|
|
|
|
|
1965-1971 Oldsmobile 442 Edelbrock Intake Manifold Gasket
EDELBROCK INTAKE MANIFOLD GASKET -- 0.06 in. thickness; 1.44 in. x 2.44 in. port; Features MP-2N Microspore technology that does not use solvents; Has a synthetic fiber composite that is designed to conform to any imperfections on the sealing surface when compressed; Nitrile bead around each port opening makes the seal even better; Designed for use with Edelbrock Performer and Performer RPM cylinder heads and manifolds.
| Part Number |
Brand |
Price |
|
| E117284 |
Edelbrock |
$16.06 |
|
|
|
|
|
1965-1971 Oldsmobile 442 Mr Gasket Intake Manifold Gasket
MR GASKET INTAKE MANIFOLD GASKET SET, 2 PIECES -- 1.41'' x 2.49'' Port Dimensions, .0625'' Thick, Made From High-Quality Cellulose/Nitrile Composition Gasket Material, Provides Excellent Sealing And Durability, Can Be Trimmed If Needed For Modified Ports, Ideal For OE Replacement, High Performance Street Use, Drag Racing, Or Oval Track Racing, Includes Side Gaskets Only, Metal Valley Pan Not Included, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G12404 |
Mr Gasket |
$17.41 |
|
|
|
|
|
1968-1971 Oldsmobile 442 Mr Gasket Intake Manifold Gasket
MR GASKET SUPER ULTRA-SEAL III INTAKE MANIFOLD GASKET SET -- 1.41 in. x 2.49 in. port dimensions, 0.0625 in. thick; Stock port; Made from custom-engineered copolymer binder system which holds fibers and fillers together; Reinforced with synthetic fillers to produce a uniform, high-strength composite sealing material; Provides excellent sealing and durability; Can be trimmed if needed for modified ports; Ideal for OE replacement, high performance street use, drag racing, or oval track racing; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G124695G |
Mr Gasket |
$24.37 |
|
|
|
|
|
1968-1970 Oldsmobile 442 Mr Gasket Intake Manifold Gasket
MR GASKET SUPER ULTRA-SEAL III INTAKE MANIFOLD GASKET SET -- 1.38 in. x 2.03 in. port dimensions, 0.0625 in. thick; Stock port; Made from custom-engineered copolymer binder system which holds fibers and fillers together; Reinforced with synthetic fillers to produce a uniform, high-strength composite sealing material; Provides excellent sealing and durability; Can be trimmed if needed for modified ports; Ideal for OE replacement, high performance street use, drag racing, or oval track racing; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G124694G |
Mr Gasket |
$24.37 |
|
|
|
|
|
1968-1970 Oldsmobile 442 Mr Gasket Intake Manifold Gasket
MR GASKET INTAKE MANIFOLD GASKET SET, 2 PIECES -- 1.38' x 2.03' Port Dimensions, .0625' Thick, Made From High-Quality Cellulose/Nitrile Composition Gasket Material, Provides Excellent Sealing And Durability, Can Be Trimmed If Needed For Modified Ports, Ideal For OE Replacement, High Performance Street Use, Drag Racing, Or Oval Track Racing, Includes Side Gaskets Only, Metal Valley Pan Not Included, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G12405G |
Mr Gasket |
$16.53 |
|
|
|
|
|
1964-1969 Oldsmobile 442 Edelbrock Intake Manifold Bolt Set
EDELBROCK INTAKE MANIFOLD BOLT KIT -- Includes cadmium finished steel bolts and hardened washers; Feature reduced hex heads for easy wrench access; Designed specifically for use with Edelbrock part numbers 2711 and 3711.
| Part Number |
Brand |
Price |
|
| E118514 |
Edelbrock |
$22.16 |
|
|
|
