|
|
1987-1991 Ford LTD Crown Victoria Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Lower Set, Upper Set Included, Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
 |
| FPMS93334 |
Felpro |
$14.23 |
|
|
|
|
|
1987-1991 Ford LTD Crown Victoria Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90361 |
Felpro |
$13.38 |
|
|
|
|
|
1983-1986 Ford LTD Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set.
| Part Number |
Brand |
Price |
|
| FPMS902661 |
Felpro |
$8.67 |
|
|
|
|
|
1984-1986 Ford LTD Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS92430 |
Felpro |
$9.75 |
|
|
|
|
|
1975-1986 Ford LTD Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90361 |
Felpro |
$13.38 |
|
|
|
|
|
1986 Ford LTD Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Lower Set, Upper Set Included, Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS93334 |
Felpro |
$14.23 |
|
|
|
|
|
1983-1985 Ford LTD Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Lower Set, Upper Set Not Included, Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS91806 |
Felpro |
$10.58 |
|
|
|
|
|
1983 Ford LTD Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS91240 |
Felpro |
$8.44 |
|
|
|
|
|
1982 Ford LTD Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS91225 |
Felpro |
$10.30 |
|
|
|
|
|
1981 Ford LTD Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS91225 |
Felpro |
$10.30 |
|
|
|
|
|
1977-1979 Ford LTD II Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90361 |
Felpro |
$13.38 |
|
|
|
|
|
1974 Ford LTD Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS901031 |
Felpro |
$13.48 |
|
|
|
|
|
1969-1974 Ford LTD Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS901101 |
Felpro |
$30.80 |
|
|
|
|
|
1974 Ford LTD Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS90116 |
Felpro |
$14.29 |
|
|
|
|
|
1972-1973 Ford LTD Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS901031 |
Felpro |
$13.48 |
|
|
|
|
|
1969-1973 Ford LTD Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS90116 |
Felpro |
$14.29 |
|
|
|
|
|
1965-1971 Ford LTD Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90145 |
Felpro |
$12.05 |
|
|
|
|
|
1968-1971 Ford LTD Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS901031 |
Felpro |
$13.48 |
|
|
|
|
|
1965-1971 Ford LTD Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS901161 |
Felpro |
$17.09 |
|
|
|
|
|
1965-1968 Ford LTD Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90145 |
Felpro |
$12.05 |
|
|
|
|
|
1965-1968 Ford LTD Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS901031 |
Felpro |
$13.48 |
|
|
|
|
|
1965-1985 Ford LTD Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer RPM 302, Intake Manifold, Designed For Great Top End Power With Good Throttle Response, High Rise, Dual Plane, Non-EGR, 1500-6500rpm, Air-Gap 302, Cast Finish, Recommend FelPro Gasket Part Number 1250 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117121 |
Edelbrock |
$215.61 |
|
|
|
|
|
1977-1979 Ford LTD II Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer RPM 302, Intake Manifold, Designed For Great Top End Power With Good Throttle Response, High Rise, Dual Plane, Non-EGR, 1500-6500rpm, Air-Gap 302, Cast Finish, Recommend FelPro Gasket Part Number 1250 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117121 |
Edelbrock |
$215.61 |
|
|
|
|
|
1969-1972 Ford LTD Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 351-W, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, Non-EGR, Idle-5500 RPM, Cast Finish, Recommended Gaskets FelPro Gasket Part number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E112181 |
Edelbrock |
$244.50 |
|
|
|
|
|
1987-1991 Ford LTD Crown Victoria Edelbrock - Edelbrock Super Victor Intake Manifold
EDELBROCK SUPER VICTOR 9.2 MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 4500 to 8500 rpm; 5.95 in. height; Includes nitrous and rear cooling water bosses; Single-plane manifold; Designed for high-rpm, large displacement, and competition 351-Windsor Fords; Engineered for square-bore carburetor; Runners have 3.10 square in. cross sectional area; Has 0.34 in. carburetor pad; Ideal for drag racing or oval track engines; For engines with 9.2 in. deck height; Recommended to use Fel-Pro intake gasket part numbers 1262 or 1262R.
| Part Number |
Brand |
Price |
|
| E112929 |
Edelbrock |
$426.17 |
|
|
|
|
|
1987-1991 Ford LTD Crown Victoria Edelbrock - Edelbrock Victor JR. Intake Manifold
EDELBROCK VICTOR JR. 351-W MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 7500 rpm; 5.75 in. height; Features 2.70 square in. runners cross sectional area; Ideal for both oval track and drag racing engines; Designed for competition 351 Windsor Ford V8s from 1969 and later with Edelbrock Performer RPM heads number 60259, Victor Jr. head number 77169, Victor head number 77219 or similar heads; Fits standard 351W blocks with a 9.5 in. deck height.
| Part Number |
Brand |
Price |
|
| E112981 |
Edelbrock |
$339.25 |
|
|
|
|
|
1987-1991 Ford LTD Crown Victoria Edelbrock - Edelbrock Glidden Victor 351w Intake Manifold
EDELBROCK GLIDDEN VICTOR 351W MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 6.97 in. A x 6.97 in. B height; Developed in conjunction with noted drag racer Billy Glidden; Features 4500 series carburetor pad for use with high rpm and large displacement Windsor headed small-block Ford with 9.5 in. deck height; Has 3.6 square in. runner area; Plenum has been increased to produce more high rpm power; Eliminates the front water cross-over to maintain optimum runner shape and location; Recommended to use Fel-Pro intake gasket part numbers 1262 or 1262R.
| Part Number |
Brand |
Price |
|
| E112828 |
Edelbrock |
$405.95 |
|
|
|
|
|
1987-1991 Ford LTD Crown Victoria Edelbrock - Edelbrock Performer RPM Air-gap Intake Manifold
EDELBROCK PERFORMER RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 50-state legal; 4.85 in. x 5.7 in. height; Provides performance improvement throughout its rpm range; Taller than the low-profile F-28 intake; The large runners feature the unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge and more horsepower; Designed for 289-302 small-block Fords.
| Part Number |
Brand |
Price |
|
| E1175354 |
Edelbrock |
$409.04 |
|
|
|
|
|
1987-1991 Ford LTD Crown Victoria Edelbrock - Edelbrock Super Victor Intake Manifold
EDELBROCK SUPER VICTOR EFI MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 4500 to 8500 rpm; 6.25 in. height; Designed for high rpm or large displacement competition 351 Windsor Ford V8s with a deck height of 9.5 in. which are used in drag racing or oval track engines; Features 3.5 square in. runners cross sectional area.
| Part Number |
Brand |
Price |
|
| E1129245 |
Edelbrock |
$380.93 |
|
|
|
|
|
1987-1991 Ford LTD Crown Victoria Edelbrock - Edelbrock Super Victor 351-w Intake Manifold
EDELBROCK SUPER VICTOR 351-W MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 4500 to 8500 rpm; 6.25 in. height; Designed for high rpm or large displacement competition 351 Windsor Ford V8s with a deck height of 9.5 in. which are used in drag racing or oval track engines; Features 3.2 square in. runners for cross sectional area; Can be used with ported factory cast iron heads; Aftermarket aluminum heads are recommended, such as Edelbrock Victor Jr. part number 77169 or Victor heads part number 77219 for ultra high-horsepower; Recommended to use Fel-Pro intake gasket part numbers 1262 or 1262R; MSD distributor part number 8578 must be used to clear the front water crossover.
| Part Number |
Brand |
Price |
|
| E112924 |
Edelbrock |
$346.17 |
|
|
|
|
|
1988-1991 Ford LTD Crown Victoria Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap 351-W, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For Stroker 351W Based Engines, Cast Finish, No Provisions For Choke Or Rear Water Crossover, Recommend FelPro Gasket Part Number 1250 for Manifold Gasket, Use 12-Bolt Intake Gasket Set, Recommend Part Number 7220
| Part Number |
Brand |
Price |
|
| E117581 |
Edelbrock |
$324.38 |
|
|
|
|
|
1987-1991 Ford LTD Crown Victoria Edelbrock - Edelbrock Victor JR. Intake Manifold
EDELBROCK VICTOR JR. 302 MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 8000 rpm; 5.5 in. height; 1.9 x 1.08 in. port exit with enough extra material to open it up to 2.10 x 1.18 in.; Without rear water crossover; Designed for competition engines using modified stock cast iron or aftermarket Windsor style cylinder heads; Recommended to use Edelbrock intake gasket part number 7220 or Fel-Pro intake gasket part number 1262.
| Part Number |
Brand |
Price |
|
| E112921 |
Edelbrock |
$291.17 |
|
|
|
|
|
1988-1991 Ford LTD Crown Victoria Edelbrock Intake Manifold
EDELBROCK RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 50-state legal; 4.85/5.70 in. taller than the 5435; Carb center to center is 6 7/16 in.; Because of carb clearance, only the MSD Small-cap distributor can be used; We used MSD 8579 in our dyno testing, but MSD 8352 may also work (fit with an 8352 has NOT been verified, but it is the same diameter as 8352, only taller to accommodate the vacuum advance module).
| Part Number |
Brand |
Price |
|
| E1175854 |
Edelbrock |
$468.01 |
|
|
|
|
|
1988-1991 Ford LTD Crown Victoria Edelbrock Intake Manifold
EDELBROCK RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Designed for street and high performance 351-400 c.i.d. 351-W Ford V8s, the RPM Air-Gap incorporates the same race-winning design that's been used on our Victor Series competition intakes for years; The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power; Larger cross sectional area and a taller carb flange with large displacement, stroker 351-W based engines; Includes nitrous bosses; No provision for exhaust heated chokes and no exhaust crossover; Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission unless used with Lokar bracket SRK-4000.
| Part Number |
Brand |
Price |
|
| E1175814 |
Edelbrock |
$447.35 |
|
|
|
|
|
1965-1986 Ford LTD Edelbrock - Edelbrock Victor JR. Intake Manifold
EDELBROCK VICTOR JR. 302 MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 8000 rpm; 5.5 in. height; 1.9 x 1.08 in. port exit with enough extra material to open it up to 2.10 x 1.18 in.; Without rear water crossover; Designed for competition engines using modified stock cast iron or aftermarket Windsor style cylinder heads; Recommended to use Edelbrock intake gasket part number 7220 or Fel-Pro intake gasket part number 1262.
| Part Number |
Brand |
Price |
|
| E112921 |
Edelbrock |
$291.17 |
|
|
|
|
|
1972-1986 Ford LTD Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap 351-W, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For Stroker 351W Based Engines, Cast Finish, No Provisions For Choke Or Rear Water Crossover, Recommend FelPro Gasket Part Number 1250 for Manifold Gasket, Use 12-Bolt Intake Gasket Set, Recommend Part Number 7220
| Part Number |
Brand |
Price |
|
| E117581 |
Edelbrock |
$324.38 |
|
|
|
|
|
1969-1986 Ford LTD Edelbrock Intake Manifold
EDELBROCK RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 50-state legal; 4.85/5.70 in. taller than the 5435; Carb center to center is 6 7/16 in.; Because of carb clearance, only the MSD Small-cap distributor can be used; We used MSD 8579 in our dyno testing, but MSD 8352 may also work (fit with an 8352 has NOT been verified, but it is the same diameter as 8352, only taller to accommodate the vacuum advance module).
| Part Number |
Brand |
Price |
|
| E1175854 |
Edelbrock |
$468.01 |
|
|
|
|
|
1965-1986 Ford LTD Edelbrock - Edelbrock Performer RPM Air-gap Intake Manifold
EDELBROCK PERFORMER RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 50-state legal; 4.85 in. x 5.7 in. height; Provides performance improvement throughout its rpm range; Taller than the low-profile F-28 intake; The large runners feature the unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge and more horsepower; Designed for 289-302 small-block Fords.
| Part Number |
Brand |
Price |
|
| E1175354 |
Edelbrock |
$409.04 |
|
|
|
|
|
1972-1986 Ford LTD Edelbrock Intake Manifold
EDELBROCK RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Designed for street and high performance 351-400 c.i.d. 351-W Ford V8s, the RPM Air-Gap incorporates the same race-winning design that's been used on our Victor Series competition intakes for years; The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power; Larger cross sectional area and a taller carb flange with large displacement, stroker 351-W based engines; Includes nitrous bosses; No provision for exhaust heated chokes and no exhaust crossover; Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission unless used with Lokar bracket SRK-4000.
| Part Number |
Brand |
Price |
|
| E1175814 |
Edelbrock |
$447.35 |
|
|
|
|
|
1965-1985 Ford LTD Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap 302, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, With Nitrous Bosses, Cast Finish, Recommend FelPro Gasket Part Number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117521 |
Edelbrock |
$291.45 |
|
|
|
|
|
1984-1985 Ford LTD Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 302, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, EGR, Idle-5500 RPM, For 4 Barrel Carb Cast Finish, Recommend FelPro Gasket Part number 1250 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E113721 |
Edelbrock |
$279.44 |
|
|
|
|
|
1965-1985 Ford LTD Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 289, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, OEM, Cast Finish, Recommend FelPro Gasket Part number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E112121 |
Edelbrock |
$192.87 |
|
|
|
|
|
1965-1985 Ford LTD Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 289, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, OEM, Polished Finish, Recommend FelPro Gasket Part number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121211 |
Edelbrock |
$426.38 |
|
|
|
|
|
1965-1985 Ford LTD Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 289, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, OEM, Endurashine, Recommend FelPro Gasket Part number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121214 |
Edelbrock |
$314.15 |
|
|
|
|
|
1965-1985 Ford LTD Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap 302, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, With Nitrous Bosses, Endurashine Chrome, Recommend FelPro Gasket Part Number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1175214 |
Edelbrock |
$419.91 |
|
|
|
|
|
1965-1985 Ford LTD Edelbrock Intake Manifold
EDELBROCK PERFORMER SERIES MANIFOLD, ALUMINUM, ENDURASHINE, SOLD INDIVIDUALLY -- 50-state legal; Designed for street 289-302 c.i.d. Ford V8; Features dual-plane high rise manifold which provide excellent high rpm power while retaining throttle response; No provisions for exhaust heated choke; Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission unless used with Lokar bracket SRK-4000.
| Part Number |
Brand |
Price |
|
| E1171214 |
Edelbrock |
$354.88 |
|
|
|
|
|
1969-1984 Ford LTD Edelbrock - Edelbrock Super Victor 351-w Intake Manifold
EDELBROCK SUPER VICTOR 351-W MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 4500 to 8500 rpm; 6.25 in. height; Designed for high rpm or large displacement competition 351 Windsor Ford V8s with a deck height of 9.5 in. which are used in drag racing or oval track engines; Features 3.2 square in. runners for cross sectional area; Can be used with ported factory cast iron heads; Aftermarket aluminum heads are recommended, such as Edelbrock Victor Jr. part number 77169 or Victor heads part number 77219 for ultra high-horsepower; Recommended to use Fel-Pro intake gasket part numbers 1262 or 1262R; MSD distributor part number 8578 must be used to clear the front water crossover.
| Part Number |
Brand |
Price |
|
| E112924 |
Edelbrock |
$346.17 |
|
|
|
|
|
1969-1984 Ford LTD Edelbrock - Edelbrock Glidden Victor 351w Intake Manifold
EDELBROCK GLIDDEN VICTOR 351W MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 6.97 in. A x 6.97 in. B height; Developed in conjunction with noted drag racer Billy Glidden; Features 4500 series carburetor pad for use with high rpm and large displacement Windsor headed small-block Ford with 9.5 in. deck height; Has 3.6 square in. runner area; Plenum has been increased to produce more high rpm power; Eliminates the front water cross-over to maintain optimum runner shape and location; Recommended to use Fel-Pro intake gasket part numbers 1262 or 1262R.
| Part Number |
Brand |
Price |
|
| E112828 |
Edelbrock |
$405.95 |
|
|
|
|
|
1969-1984 Ford LTD Edelbrock - Edelbrock Super Victor Intake Manifold
EDELBROCK SUPER VICTOR EFI MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 4500 to 8500 rpm; 6.25 in. height; Designed for high rpm or large displacement competition 351 Windsor Ford V8s with a deck height of 9.5 in. which are used in drag racing or oval track engines; Features 3.5 square in. runners cross sectional area.
| Part Number |
Brand |
Price |
|
| E1129245 |
Edelbrock |
$380.93 |
|
|
|
|
|
1969-1984 Ford LTD Edelbrock - Edelbrock Victor JR. Intake Manifold
EDELBROCK VICTOR JR. 351-W MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 7500 rpm; 5.75 in. height; Features 2.70 square in. runners cross sectional area; Ideal for both oval track and drag racing engines; Designed for competition 351 Windsor Ford V8s from 1969 and later with Edelbrock Performer RPM heads number 60259, Victor Jr. head number 77169, Victor head number 77219 or similar heads; Fits standard 351W blocks with a 9.5 in. deck height.
| Part Number |
Brand |
Price |
|
| E112981 |
Edelbrock |
$339.25 |
|
|
