|
|
1968-1974 Ford E-300 Econoline Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
 |
| FPMS901031 |
Felpro |
$13.48 |
|
|
|
|
|
1963 Ford Ford 300 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90145 |
Felpro |
$12.05 |
|
|
|
|
|
1963 Ford Ford 300 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS901031 |
Felpro |
$13.48 |
|
|
|
|
|
1963 Ford Ford 300 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS901031 |
Felpro |
$13.48 |
|
|
|
|
|
1963 Ford Ford 300 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS901161 |
Felpro |
$17.09 |
|
|
|
|
|
1957-1960 Ford Custom 300 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS9361B1 |
Felpro |
$12.94 |
|
|
|
|
|
1959-1960 Ford Custom 300 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90145 |
Felpro |
$12.05 |
|
|
|
|
|
1958-1959 Ford Custom 300 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90145 |
Felpro |
$12.05 |
|
|
|
|
|
1968-1974 Ford E-300 Econoline Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer RPM 302, Intake Manifold, Designed For Great Top End Power With Good Throttle Response, High Rise, Dual Plane, Non-EGR, 1500-6500rpm, Air-Gap 302, Cast Finish, Recommend FelPro Gasket Part Number 1250 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117121 |
Edelbrock |
$215.61 |
|
|
|
|
|
1963 Ford Ford 300 Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer RPM 302, Intake Manifold, Designed For Great Top End Power With Good Throttle Response, High Rise, Dual Plane, Non-EGR, 1500-6500rpm, Air-Gap 302, Cast Finish, Recommend FelPro Gasket Part Number 1250 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117121 |
Edelbrock |
$215.61 |
|
|
|
|
|
1968-1974 Ford E-300 Econoline Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 289, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, OEM, Endurashine, Recommend FelPro Gasket Part number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121214 |
Edelbrock |
$314.15 |
|
|
|
|
|
1968-1974 Ford E-300 Econoline Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap 302, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, With Nitrous Bosses, Cast Finish, Recommend FelPro Gasket Part Number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117521 |
Edelbrock |
$291.45 |
|
|
|
|
|
1968-1974 Ford E-300 Econoline Edelbrock - Edelbrock Victor JR. Intake Manifold
EDELBROCK VICTOR JR. 302 MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 8000 rpm; 5.5 in. height; 1.9 x 1.08 in. port exit with enough extra material to open it up to 2.10 x 1.18 in.; Without rear water crossover; Designed for competition engines using modified stock cast iron or aftermarket Windsor style cylinder heads; Recommended to use Edelbrock intake gasket part number 7220 or Fel-Pro intake gasket part number 1262.
| Part Number |
Brand |
Price |
|
| E112921 |
Edelbrock |
$291.17 |
|
|
|
|
|
1968-1974 Ford E-300 Econoline Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 289, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, OEM, Polished Finish, Recommend FelPro Gasket Part number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121211 |
Edelbrock |
$426.38 |
|
|
|
|
|
1968-1974 Ford E-300 Econoline Edelbrock Intake Manifold
EDELBROCK PERFORMER SERIES MANIFOLD, ALUMINUM, ENDURASHINE, SOLD INDIVIDUALLY -- 50-state legal; Designed for street 289-302 c.i.d. Ford V8; Features dual-plane high rise manifold which provide excellent high rpm power while retaining throttle response; No provisions for exhaust heated choke; Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission unless used with Lokar bracket SRK-4000.
| Part Number |
Brand |
Price |
|
| E1171214 |
Edelbrock |
$354.88 |
|
|
|
|
|
1968-1974 Ford E-300 Econoline Edelbrock - Edelbrock Performer RPM Air-gap Intake Manifold
EDELBROCK PERFORMER RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 50-state legal; 4.85 in. x 5.7 in. height; Provides performance improvement throughout its rpm range; Taller than the low-profile F-28 intake; The large runners feature the unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge and more horsepower; Designed for 289-302 small-block Fords.
| Part Number |
Brand |
Price |
|
| E1175354 |
Edelbrock |
$409.04 |
|
|
|
|
|
1968-1974 Ford E-300 Econoline Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 289, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, OEM, Cast Finish, Recommend FelPro Gasket Part number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E112121 |
Edelbrock |
$192.87 |
|
|
|
|
|
1968-1974 Ford E-300 Econoline Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap 302, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, With Nitrous Bosses, Endurashine Chrome, Recommend FelPro Gasket Part Number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1175214 |
Edelbrock |
$419.91 |
|
|
|
|
|
1963 Ford Ford 300 Edelbrock - Edelbrock Victor FE Intake Manifold
EDELBROCK VICTOR FE MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 4000 to 8000 rpm; 6.49 in. height; Includes machined rear breather boss, unmachined nitrous bosses, and front oil fill tube boss; Single-plane manifold; Designed for high performance 390-406-410-427-428 c.i.d. Ford FE engines; Provides race-winning power for many types of competition; Runners have plenty of material for port matching to low or medium riser style heads; Carburetor flange height is equal to the Ford high-riser manifold part number C4AE-9424-G to fit under 427 Cobra hoods; For square-bore carburetors; Match perfectly with Edelbrock FE heads; Will not fit 427 high-riser and tunnel-port heads; Recommended to use Fel-Pro intake gasket part number 1247.
| Part Number |
Brand |
Price |
|
| E112936 |
Edelbrock |
$626.07 |
|
|
|
|
|
1963 Ford Ford 300 Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap 302, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, With Nitrous Bosses, Endurashine Chrome, Recommend FelPro Gasket Part Number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1175214 |
Edelbrock |
$419.91 |
|
|
|
|
|
1963 Ford Ford 300 Edelbrock - Edelbrock Victor FE Intake Manifold
EDELBROCK VICTOR FE MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 4000 to 8000 rpm; 6.49 in. height; Includes machined rear breather boss, unmachined nitrous bosses, and front oil fill tube boss; Single-plane manifold; Designed for high performance 390-406-410-427-428 c.i.d. Ford FE engines; Provides race-winning power for many types of competition; Runners have plenty of material for port matching to low or medium riser style heads; Carburetor flange height is equal to the Ford high-riser manifold part number C4AE-9424-G to fit under 427 Cobra hoods; For 4500 series carburetors; Match perfectly with Edelbrock FE heads; Will not fit 427 high-riser and tunnel-port heads; Recommended to use Fel-Pro intake gasket part number 1247.
| Part Number |
Brand |
Price |
|
| E112937 |
Edelbrock |
$638.16 |
|
|
|
|
|
1963 Ford 300 Edelbrock - Edelbrock Victor JR. Intake Manifold
EDELBROCK VICTOR JR. 302 MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 8000 rpm; 5.5 in. height; 1.9 x 1.08 in. port exit with enough extra material to open it up to 2.10 x 1.18 in.; Without rear water crossover; Designed for competition engines using modified stock cast iron or aftermarket Windsor style cylinder heads; Recommended to use Edelbrock intake gasket part number 7220 or Fel-Pro intake gasket part number 1262.
| Part Number |
Brand |
Price |
|
| E112921 |
Edelbrock |
$291.17 |
|
|
|
|
|
1963 Ford Ford 300 Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 289, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, OEM, Polished Finish, Recommend FelPro Gasket Part number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121211 |
Edelbrock |
$426.38 |
|
|
|
|
|
1963 Ford 300 Edelbrock - Edelbrock Victor FE Intake Manifold
EDELBROCK VICTOR FE MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 4000 to 8000 rpm; 6.49 in. height; Includes machined rear breather boss, unmachined nitrous bosses, and front oil fill tube boss; Single-plane manifold; Designed for high performance 390-406-410-427-428 c.i.d. Ford FE engines; Provides race-winning power for many types of competition; Runners have plenty of material for port matching to low or medium riser style heads; Carburetor flange height is equal to the Ford high-riser manifold part number C4AE-9424-G to fit under 427 Cobra hoods; For 4500 series carburetors; Match perfectly with Edelbrock FE heads; Will not fit 427 high-riser and tunnel-port heads; Recommended to use Fel-Pro intake gasket part number 1247.
| Part Number |
Brand |
Price |
|
| E112937 |
Edelbrock |
$638.16 |
|
|
|
|
|
1963 Ford Ford 300 Edelbrock - Edelbrock Victor JR. Intake Manifold
EDELBROCK VICTOR JR. 302 MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 8000 rpm; 5.5 in. height; 1.9 x 1.08 in. port exit with enough extra material to open it up to 2.10 x 1.18 in.; Without rear water crossover; Designed for competition engines using modified stock cast iron or aftermarket Windsor style cylinder heads; Recommended to use Edelbrock intake gasket part number 7220 or Fel-Pro intake gasket part number 1262.
| Part Number |
Brand |
Price |
|
| E112921 |
Edelbrock |
$291.17 |
|
|
|
|
|
1963 Ford 300 Edelbrock - Edelbrock Performer RPM Air-gap Intake Manifold
EDELBROCK PERFORMER RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 50-state legal; 4.85 in. x 5.7 in. height; Provides performance improvement throughout its rpm range; Taller than the low-profile F-28 intake; The large runners feature the unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge and more horsepower; Designed for 289-302 small-block Fords.
| Part Number |
Brand |
Price |
|
| E1175354 |
Edelbrock |
$409.04 |
|
|
|
|
|
1963 Ford Ford 300 Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 289, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, OEM, Cast Finish, Recommend FelPro Gasket Part number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E112121 |
Edelbrock |
$192.87 |
|
|
|
|
|
1963 Ford 300 Edelbrock - Edelbrock Victor FE Intake Manifold
EDELBROCK VICTOR FE MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 4000 to 8000 rpm; 6.49 in. height; Includes machined rear breather boss, unmachined nitrous bosses, and front oil fill tube boss; Single-plane manifold; Designed for high performance 390-406-410-427-428 c.i.d. Ford FE engines; Provides race-winning power for many types of competition; Runners have plenty of material for port matching to low or medium riser style heads; Carburetor flange height is equal to the Ford high-riser manifold part number C4AE-9424-G to fit under 427 Cobra hoods; For square-bore carburetors; Match perfectly with Edelbrock FE heads; Will not fit 427 high-riser and tunnel-port heads; Recommended to use Fel-Pro intake gasket part number 1247.
| Part Number |
Brand |
Price |
|
| E112936 |
Edelbrock |
$626.07 |
|
|
|
|
|
1963 Ford Ford 300 Edelbrock Intake Manifold
EDELBROCK PERFORMER SERIES MANIFOLD, ALUMINUM, ENDURASHINE, SOLD INDIVIDUALLY -- 50-state legal; Designed for street 289-302 c.i.d. Ford V8; Features dual-plane high rise manifold which provide excellent high rpm power while retaining throttle response; No provisions for exhaust heated choke; Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission unless used with Lokar bracket SRK-4000.
| Part Number |
Brand |
Price |
|
| E1171214 |
Edelbrock |
$354.88 |
|
|
|
|
|
1963 Ford Ford 300 Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 289, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, OEM, Endurashine, Recommend FelPro Gasket Part number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121214 |
Edelbrock |
$314.15 |
|
|
|
|
|
1963 Ford Ford 300 Edelbrock - Edelbrock Performer RPM Air-gap Intake Manifold
EDELBROCK PERFORMER RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 50-state legal; 4.85 in. x 5.7 in. height; Provides performance improvement throughout its rpm range; Taller than the low-profile F-28 intake; The large runners feature the unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge and more horsepower; Designed for 289-302 small-block Fords.
| Part Number |
Brand |
Price |
|
| E1175354 |
Edelbrock |
$409.04 |
|
|
|
|
|
1963 Ford Ford 300 Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap 302, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, With Nitrous Bosses, Cast Finish, Recommend FelPro Gasket Part Number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117521 |
Edelbrock |
$291.45 |
|
|
|
|
|
1959-1960 Ford Custom 300 Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 390, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, Cast Finish, Will not Accept Stock Motorcraft Spread-Bore Carburetor, Recommend FelPro Gasket Part number 1247 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E112105 |
Edelbrock |
$351.86 |
|
|
|
|
|
1968-1974 Ford E-300 Econoline Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- 0.31 in. -18 x 2 in. socket head; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds.
| Part Number |
Brand |
Price |
|
| G12958G |
Mr Gasket |
$11.48 |
|
|
|
|
|
1968-1974 Ford E-300 Econoline Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .3125-18 x 2 Hex Head Bolts And Twelve .3125" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125006 |
Mr Gasket |
$25.25 |
|
|
|
|
|
1968-1974 Ford E-300 Econoline Mr Gasket Intake Manifold Bolt Set
MR GASKET SUPER INTAKE MANIFOLD BOLTS, BLACK, SET OF 12 -- 5/16-18 in. thread size; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds.
| Part Number |
Brand |
Price |
|
| G126082 |
Mr Gasket |
$21.04 |
|
|
|
|
|
1963 Ford Ford 300 Mr Gasket Intake Manifold Bolt Set
MR GASKET SUPER INTAKE MANIFOLD BOLTS, BLACK, SET OF 12 -- 5/16-18 in. thread size; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds.
| Part Number |
Brand |
Price |
|
| G126082 |
Mr Gasket |
$21.04 |
|
|
|
|
|
1963 Ford Ford 300 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .3125-18 x 2 Hex Head Bolts And Twelve .3125" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125006 |
Mr Gasket |
$25.25 |
|
|
|
|
|
1963 Ford Ford 300 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- 0.31 in. -18 x 2 in. socket head; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds.
| Part Number |
Brand |
Price |
|
| G12958G |
Mr Gasket |
$11.48 |
|
|
|
|
|
1986-1993 Ford Mustang Holley Intake Manifold
HOLLEY SYSTEMAX II EFI SERIES INTAKE MANIFOLD KIT, MIRROR FINISH -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; A Complete Manifold Kit With External EGR Passage And Basic Operating Power Band Range Of 2,000-6,500 RPM, Provides Maximum Unrestricted Air Flow, Promotes Better Fuel Efficiency, For 5.0L Engine, May Require The Evacuation Of The Air Conditioning System If The Condenser Needs To Be Removed, With Holley's Limited Warranty
| Part Number |
Brand |
Price |
|
| H1930072S |
Holley |
$727.40 |
|
|
|
|
|
1986-1993 Ford Thunderbird Holley Intake Manifold
HOLLEY SYSTEMAX II EFI SERIES INTAKE MANIFOLD KIT, MIRROR FINISH -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; A Complete Manifold Kit With External EGR Passage And Basic Operating Power Band Range Of 2,000-6,500 RPM, Provides Maximum Unrestricted Air Flow, Promotes Better Fuel Efficiency, For 5.0L Engine, May Require The Evacuation Of The Air Conditioning System If The Condenser Needs To Be Removed, With Holley's Limited Warranty
| Part Number |
Brand |
Price |
|
| H1930072S |
Holley |
$727.40 |
|
|
|
|
|
1987-1991 Ford LTD Crown Victoria Holley Intake Manifold
HOLLEY SYSTEMAX II EFI SERIES INTAKE MANIFOLD KIT, MIRROR FINISH -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; A Complete Manifold Kit With External EGR Passage And Basic Operating Power Band Range Of 2,000-6,500 RPM, Provides Maximum Unrestricted Air Flow, Promotes Better Fuel Efficiency, For 5.0L Engine, May Require The Evacuation Of The Air Conditioning System If The Condenser Needs To Be Removed, With Holley's Limited Warranty
| Part Number |
Brand |
Price |
|
| H1930072S |
Holley |
$727.40 |
|
|
|
|
|
1987-1991 Ford Country Squire Holley Intake Manifold
HOLLEY SYSTEMAX II EFI SERIES INTAKE MANIFOLD KIT, MIRROR FINISH -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; A Complete Manifold Kit With External EGR Passage And Basic Operating Power Band Range Of 2,000-6,500 RPM, Provides Maximum Unrestricted Air Flow, Promotes Better Fuel Efficiency, For 5.0L Engine, May Require The Evacuation Of The Air Conditioning System If The Condenser Needs To Be Removed, With Holley's Limited Warranty
| Part Number |
Brand |
Price |
|
| H1930072S |
Holley |
$727.40 |
|
|
|
|
|
1986 Ford LTD Holley Intake Manifold
HOLLEY SYSTEMAX II EFI SERIES INTAKE MANIFOLD KIT, MIRROR FINISH -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; A Complete Manifold Kit With External EGR Passage And Basic Operating Power Band Range Of 2,000-6,500 RPM, Provides Maximum Unrestricted Air Flow, Promotes Better Fuel Efficiency, For 5.0L Engine, May Require The Evacuation Of The Air Conditioning System If The Condenser Needs To Be Removed, With Holley's Limited Warranty
| Part Number |
Brand |
Price |
|
| H1930072S |
Holley |
$727.40 |
|
|
|
|
|
1968-1974 Ford E-300 Econoline Professional Products - Professional Products Typhoon Intake Manifold
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- 50-state legal; 1500 to 6500 RPM power range; Rectangular port; A dual plane 180-degree medium high rise design that delivers outstanding street or race performance across while retaining good throttle response; Has a rear water crossover with the two extra NPT ports and features nitrous bosses; Uses a square bore 600 CFM carb for street performance and 750 CFM carb for race application; Non-EGR compatible; Used with intake gasket part number 54600; Torque manifold bolts to 15 to 18 lb.-ft. only.
| Part Number |
Brand |
Price |
|
| P8954000 |
Professional Products |
$218.32 |
|
|
|
|
|
1968-1974 Ford E-300 Econoline Professional Products - Professional Products Typhoon Intake Manifold
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- 50-state legal; 1500 to 6500 RPM power range; Rectangular port; This manifold is a dual plane 180-degree medium high rise design that delivers outstanding street or race performance across while retaining good throttle response; Has a rear water crossover with the two extra NPT ports and features nitrous bosses; Uses a square bore 600 CFM carb for street performance and 750 CFM carb for race application; Non-EGR compatible; Used with intake gasket part number 54600; Torque manifold bolts to 15 to 18 lb.-ft. only.
| Part Number |
Brand |
Price |
|
| P8954001 |
Professional Products |
$179.34 |
|
|
|
|
|
1968-1974 Ford E-300 Econoline Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; dual plane manifold; Features an open area under the plenum chamber that provides a flow of cooling air which keeps the temperature of the air/fuel charge lower to produce more power and torque; With cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8954025 |
Professional Products |
$268.03 |
|
|
|
|
|
1968-1974 Ford E-300 Econoline Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8954026 |
Professional Products |
$207.88 |
|
|
|
|
|
1968-1974 Ford E-300 Econoline Professional Products - Professional Products Hurricane Intake Manifold
PROFESSIONAL PRODUCTS HURRICANE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 3500 to 8000 RPM power range; 1.07 in. x 2.13 in. port size; Rectangular port; Single plane manifold; Designed for serious street application using stock cast-iron or windsor style cylinder heads; Features bosses that can be drilled and tapped for nitrous, rear water crossover passage, four corner tapped water ports, 1/8 NPT vacuum port under the carb flange; Recommended intake gasket part number 54600 or Fel-Pro part number 1250.
| Part Number |
Brand |
Price |
|
| P8954031 |
Professional Products |
$216.98 |
|
|
|
|
|
1963 Ford Ford 300 Professional Products - Professional Products Hurricane Intake Manifold
PROFESSIONAL PRODUCTS HURRICANE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 3500 to 8000 RPM power range; 1.07 in. x 2.13 in. port size; Rectangular port; Single plane manifold; Designed for serious street application using stock cast-iron or windsor style cylinder heads; Features bosses that can be drilled and tapped for nitrous, rear water crossover passage, four corner tapped water ports, 1/8 NPT vacuum port under the carb flange; Recommended intake gasket part number 54600 or Fel-Pro part number 1250.
| Part Number |
Brand |
Price |
|
| P8954031 |
Professional Products |
$216.98 |
|
|
