|
|
1968-1970 Ford Falcon Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
 |
| FPMS901031 |
Felpro |
$13.48 |
|
|
|
|
|
1964-1970 Ford Falcon Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS901161 |
Felpro |
$17.09 |
|
|
|
|
|
1970 Ford Falcon Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS901101 |
Felpro |
$30.80 |
|
|
|
|
|
1969-1970 Ford Falcon Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS90116 |
Felpro |
$14.29 |
|
|
|
|
|
1964-1968 Ford Falcon Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS901031 |
Felpro |
$13.48 |
|
|
|
|
|
1962-1965 Ford Falcon Sedan Delivery Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS901031 |
Felpro |
$13.48 |
|
|
|
|
|
1962-1965 Ford Falcon Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS901031 |
Felpro |
$13.48 |
|
|
|
|
|
1964-1970 Ford Falcon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer RPM 302, Intake Manifold, Designed For Great Top End Power With Good Throttle Response, High Rise, Dual Plane, Non-EGR, 1500-6500rpm, Air-Gap 302, Cast Finish, Recommend FelPro Gasket Part Number 1250 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117121 |
Edelbrock |
$215.61 |
|
|
|
|
|
1965 Ford Falcon Sedan Delivery Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer RPM 302, Intake Manifold, Designed For Great Top End Power With Good Throttle Response, High Rise, Dual Plane, Non-EGR, 1500-6500rpm, Air-Gap 302, Cast Finish, Recommend FelPro Gasket Part Number 1250 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117121 |
Edelbrock |
$215.61 |
|
|
|
|
|
1964-1970 Ford Falcon Edelbrock Intake Manifold
EDELBROCK PERFORMER SERIES MANIFOLD, ALUMINUM, ENDURASHINE, SOLD INDIVIDUALLY -- 50-state legal; Designed for street 289-302 c.i.d. Ford V8; Features dual-plane high rise manifold which provide excellent high rpm power while retaining throttle response; No provisions for exhaust heated choke; Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission unless used with Lokar bracket SRK-4000.
| Part Number |
Brand |
Price |
|
| E1171214 |
Edelbrock |
$354.88 |
|
|
|
|
|
1970 Ford Falcon Edelbrock - Edelbrock Victor FE Intake Manifold
EDELBROCK VICTOR FE MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 4000 to 8000 rpm; 6.49 in. height; Includes machined rear breather boss, unmachined nitrous bosses, and front oil fill tube boss; Single-plane manifold; Designed for high performance 390-406-410-427-428 c.i.d. Ford FE engines; Provides race-winning power for many types of competition; Runners have plenty of material for port matching to low or medium riser style heads; Carburetor flange height is equal to the Ford high-riser manifold part number C4AE-9424-G to fit under 427 Cobra hoods; For 4500 series carburetors; Match perfectly with Edelbrock FE heads; Will not fit 427 high-riser and tunnel-port heads; Recommended to use Fel-Pro intake gasket part number 1247.
| Part Number |
Brand |
Price |
|
| E112937 |
Edelbrock |
$638.16 |
|
|
|
|
|
1964-1970 Ford Falcon Edelbrock - Edelbrock Victor JR. Intake Manifold
EDELBROCK VICTOR JR. 302 MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 8000 rpm; 5.5 in. height; 1.9 x 1.08 in. port exit with enough extra material to open it up to 2.10 x 1.18 in.; Without rear water crossover; Designed for competition engines using modified stock cast iron or aftermarket Windsor style cylinder heads; Recommended to use Edelbrock intake gasket part number 7220 or Fel-Pro intake gasket part number 1262.
| Part Number |
Brand |
Price |
|
| E112921 |
Edelbrock |
$291.17 |
|
|
|
|
|
1970 Ford Falcon Edelbrock - Edelbrock Victor 460 Intake Manifold
EDELBROCK VICTOR 460 MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 8000 rpm; 6.3 in. height; 2.16 x 1.88 in. port exit with enough extra material to open it up to the cast iron Cobra-Jet heads; Ideal for drag racing, marine or any application requiring maximum power up to 8000 rpm; Designed for Ford 429/460 competition engines using Cobra-Jet cast iron, SVO Cobra-Jet aluminum (M-6049-A429), or the Edelbrock 460 CJ aluminum heads; Standard 429/460 cast iron heads will require port matching of the head to fit manifold; For 4500 series carburetors; Will not fit late-model production heads 1988 and later.
| Part Number |
Brand |
Price |
|
| E112966 |
Edelbrock |
$337.96 |
|
|
|
|
|
1969-1970 Ford Falcon Edelbrock - Edelbrock Super Victor 351-w Intake Manifold
EDELBROCK SUPER VICTOR 351-W MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 4500 to 8500 rpm; 6.25 in. height; Designed for high rpm or large displacement competition 351 Windsor Ford V8s with a deck height of 9.5 in. which are used in drag racing or oval track engines; Features 3.2 square in. runners for cross sectional area; Can be used with ported factory cast iron heads; Aftermarket aluminum heads are recommended, such as Edelbrock Victor Jr. part number 77169 or Victor heads part number 77219 for ultra high-horsepower; Recommended to use Fel-Pro intake gasket part numbers 1262 or 1262R; MSD distributor part number 8578 must be used to clear the front water crossover.
| Part Number |
Brand |
Price |
|
| E112924 |
Edelbrock |
$346.17 |
|
|
|
|
|
1963-1970 Ford Falcon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 289, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, OEM, Endurashine, Recommend FelPro Gasket Part number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121214 |
Edelbrock |
$314.15 |
|
|
|
|
|
1970 Ford Falcon Edelbrock - Edelbrock Victor FE Intake Manifold
EDELBROCK VICTOR FE MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 4000 to 8000 rpm; 6.49 in. height; Includes machined rear breather boss, unmachined nitrous bosses, and front oil fill tube boss; Single-plane manifold; Designed for high performance 390-406-410-427-428 c.i.d. Ford FE engines; Provides race-winning power for many types of competition; Runners have plenty of material for port matching to low or medium riser style heads; Carburetor flange height is equal to the Ford high-riser manifold part number C4AE-9424-G to fit under 427 Cobra hoods; For square-bore carburetors; Match perfectly with Edelbrock FE heads; Will not fit 427 high-riser and tunnel-port heads; Recommended to use Fel-Pro intake gasket part number 1247.
| Part Number |
Brand |
Price |
|
| E112936 |
Edelbrock |
$626.07 |
|
|
|
|
|
1964-1970 Ford Falcon Edelbrock - Edelbrock Performer RPM Air-gap Intake Manifold
EDELBROCK PERFORMER RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 50-state legal; 4.85 in. x 5.7 in. height; Provides performance improvement throughout its rpm range; Taller than the low-profile F-28 intake; The large runners feature the unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge and more horsepower; Designed for 289-302 small-block Fords.
| Part Number |
Brand |
Price |
|
| E1175354 |
Edelbrock |
$409.04 |
|
|
|
|
|
1964-1970 Ford Falcon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap 302, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, With Nitrous Bosses, Cast Finish, Recommend FelPro Gasket Part Number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117521 |
Edelbrock |
$291.45 |
|
|
|
|
|
1969-1970 Ford Falcon Edelbrock - Edelbrock Glidden Victor 351w Intake Manifold
EDELBROCK GLIDDEN VICTOR 351W MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 6.97 in. A x 6.97 in. B height; Developed in conjunction with noted drag racer Billy Glidden; Features 4500 series carburetor pad for use with high rpm and large displacement Windsor headed small-block Ford with 9.5 in. deck height; Has 3.6 square in. runner area; Plenum has been increased to produce more high rpm power; Eliminates the front water cross-over to maintain optimum runner shape and location; Recommended to use Fel-Pro intake gasket part numbers 1262 or 1262R.
| Part Number |
Brand |
Price |
|
| E112828 |
Edelbrock |
$405.95 |
|
|
|
|
|
1964-1970 Ford Falcon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap 302, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, With Nitrous Bosses, Endurashine Chrome, Recommend FelPro Gasket Part Number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1175214 |
Edelbrock |
$419.91 |
|
|
|
|
|
1963-1970 Ford Falcon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 289, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, OEM, Polished Finish, Recommend FelPro Gasket Part number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121211 |
Edelbrock |
$426.38 |
|
|
|
|
|
1969-1970 Ford Falcon Edelbrock - Edelbrock Super Victor Intake Manifold
EDELBROCK SUPER VICTOR 9.2 MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 4500 to 8500 rpm; 5.95 in. height; Includes nitrous and rear cooling water bosses; Single-plane manifold; Designed for high-rpm, large displacement, and competition 351-Windsor Fords; Engineered for square-bore carburetor; Runners have 3.10 square in. cross sectional area; Has 0.34 in. carburetor pad; Ideal for drag racing or oval track engines; For engines with 9.2 in. deck height; Recommended to use Fel-Pro intake gasket part numbers 1262 or 1262R.
| Part Number |
Brand |
Price |
|
| E112929 |
Edelbrock |
$426.17 |
|
|
|
|
|
1969-1970 Ford Falcon Edelbrock - Edelbrock Victor JR. Intake Manifold
EDELBROCK VICTOR JR. 351-W MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 7500 rpm; 5.75 in. height; Features 2.70 square in. runners cross sectional area; Ideal for both oval track and drag racing engines; Designed for competition 351 Windsor Ford V8s from 1969 and later with Edelbrock Performer RPM heads number 60259, Victor Jr. head number 77169, Victor head number 77219 or similar heads; Fits standard 351W blocks with a 9.5 in. deck height.
| Part Number |
Brand |
Price |
|
| E112981 |
Edelbrock |
$339.25 |
|
|
|
|
|
1963-1970 Ford Falcon Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 289, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, OEM, Cast Finish, Recommend FelPro Gasket Part number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E112121 |
Edelbrock |
$192.87 |
|
|
|
|
|
1969-1970 Ford Falcon Edelbrock - Edelbrock Super Victor Intake Manifold
EDELBROCK SUPER VICTOR EFI MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 4500 to 8500 rpm; 6.25 in. height; Designed for high rpm or large displacement competition 351 Windsor Ford V8s with a deck height of 9.5 in. which are used in drag racing or oval track engines; Features 3.5 square in. runners cross sectional area.
| Part Number |
Brand |
Price |
|
| E1129245 |
Edelbrock |
$380.93 |
|
|
|
|
|
1965 Ford Falcon Sedan Delivery Edelbrock Intake Manifold
EDELBROCK PERFORMER SERIES MANIFOLD, ALUMINUM, ENDURASHINE, SOLD INDIVIDUALLY -- 50-state legal; Designed for street 289-302 c.i.d. Ford V8; Features dual-plane high rise manifold which provide excellent high rpm power while retaining throttle response; No provisions for exhaust heated choke; Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission unless used with Lokar bracket SRK-4000.
| Part Number |
Brand |
Price |
|
| E1171214 |
Edelbrock |
$354.88 |
|
|
|
|
|
1963-1965 Ford Falcon Sedan Delivery Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 289, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, OEM, Cast Finish, Recommend FelPro Gasket Part number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E112121 |
Edelbrock |
$192.87 |
|
|
|
|
|
1965 Ford Falcon Sedan Delivery Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap 302, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, With Nitrous Bosses, Cast Finish, Recommend FelPro Gasket Part Number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117521 |
Edelbrock |
$291.45 |
|
|
|
|
|
1964-1965 Ford Falcon Sedan Delivery Edelbrock - Edelbrock Performer RPM Air-gap Intake Manifold
EDELBROCK PERFORMER RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 50-state legal; 4.85 in. x 5.7 in. height; Provides performance improvement throughout its rpm range; Taller than the low-profile F-28 intake; The large runners feature the unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge and more horsepower; Designed for 289-302 small-block Fords.
| Part Number |
Brand |
Price |
|
| E1175354 |
Edelbrock |
$409.04 |
|
|
|
|
|
1963-1965 Ford Falcon Sedan Delivery Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 289, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, OEM, Polished Finish, Recommend FelPro Gasket Part number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121211 |
Edelbrock |
$426.38 |
|
|
|
|
|
1964-1965 Ford Falcon Sedan Delivery Edelbrock - Edelbrock Victor JR. Intake Manifold
EDELBROCK VICTOR JR. 302 MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 8000 rpm; 5.5 in. height; 1.9 x 1.08 in. port exit with enough extra material to open it up to 2.10 x 1.18 in.; Without rear water crossover; Designed for competition engines using modified stock cast iron or aftermarket Windsor style cylinder heads; Recommended to use Edelbrock intake gasket part number 7220 or Fel-Pro intake gasket part number 1262.
| Part Number |
Brand |
Price |
|
| E112921 |
Edelbrock |
$291.17 |
|
|
|
|
|
1963-1965 Ford Falcon Sedan Delivery Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 289, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, OEM, Endurashine, Recommend FelPro Gasket Part number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121214 |
Edelbrock |
$314.15 |
|
|
|
|
|
1965 Ford Falcon Sedan Delivery Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap 302, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, With Nitrous Bosses, Endurashine Chrome, Recommend FelPro Gasket Part Number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1175214 |
Edelbrock |
$419.91 |
|
|
|
|
|
1963-1970 Ford Falcon Mr Gasket Intake Manifold Bolt Set
MR GASKET SUPER INTAKE MANIFOLD BOLTS, BLACK, SET OF 12 -- 5/16-18 in. thread size; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds.
| Part Number |
Brand |
Price |
|
| G126082 |
Mr Gasket |
$21.04 |
|
|
|
|
|
1963-1970 Ford Falcon Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- 0.31 in. -18 x 2 in. socket head; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds.
| Part Number |
Brand |
Price |
|
| G12958G |
Mr Gasket |
$11.48 |
|
|
|
|
|
1964-1970 Ford Falcon Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .3125-18 x 2 Hex Head Bolts And Twelve .3125" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125006 |
Mr Gasket |
$25.25 |
|
|
|
|
|
1965 Ford Falcon Sedan Delivery Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .3125-18 x 2 Hex Head Bolts And Twelve .3125" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125006 |
Mr Gasket |
$25.25 |
|
|
|
|
|
1963-1965 Ford Falcon Sedan Delivery Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- 0.31 in. -18 x 2 in. socket head; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds.
| Part Number |
Brand |
Price |
|
| G12958G |
Mr Gasket |
$11.48 |
|
|
|
|
|
1963-1965 Ford Falcon Sedan Delivery Mr Gasket Intake Manifold Bolt Set
MR GASKET SUPER INTAKE MANIFOLD BOLTS, BLACK, SET OF 12 -- 5/16-18 in. thread size; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds.
| Part Number |
Brand |
Price |
|
| G126082 |
Mr Gasket |
$21.04 |
|
|
|
|
|
1964-1970 Ford Falcon Professional Products - Professional Products Typhoon Intake Manifold
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- 50-state legal; 1500 to 6500 RPM power range; Rectangular port; A dual plane 180-degree medium high rise design that delivers outstanding street or race performance across while retaining good throttle response; Has a rear water crossover with the two extra NPT ports and features nitrous bosses; Uses a square bore 600 CFM carb for street performance and 750 CFM carb for race application; Non-EGR compatible; Used with intake gasket part number 54600; Torque manifold bolts to 15 to 18 lb.-ft. only.
| Part Number |
Brand |
Price |
|
| P8954000 |
Professional Products |
$218.32 |
|
|
|
|
|
1964-1970 Ford Falcon Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8954026 |
Professional Products |
$207.88 |
|
|
|
|
|
1964-1970 Ford Falcon Professional Products - Professional Products Typhoon Intake Manifold
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- 50-state legal; 1500 to 6500 RPM power range; Rectangular port; This manifold is a dual plane 180-degree medium high rise design that delivers outstanding street or race performance across while retaining good throttle response; Has a rear water crossover with the two extra NPT ports and features nitrous bosses; Uses a square bore 600 CFM carb for street performance and 750 CFM carb for race application; Non-EGR compatible; Used with intake gasket part number 54600; Torque manifold bolts to 15 to 18 lb.-ft. only.
| Part Number |
Brand |
Price |
|
| P8954001 |
Professional Products |
$179.34 |
|
|
|
|
|
1964-1970 Ford Falcon Professional Products - Professional Products Hurricane Intake Manifold
PROFESSIONAL PRODUCTS HURRICANE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 3500 to 8000 RPM power range; 1.07 in. x 2.13 in. port size; Rectangular port; Single plane manifold; Designed for serious street application using stock cast-iron or windsor style cylinder heads; Features bosses that can be drilled and tapped for nitrous, rear water crossover passage, four corner tapped water ports, 1/8 NPT vacuum port under the carb flange; Recommended intake gasket part number 54600 or Fel-Pro part number 1250.
| Part Number |
Brand |
Price |
|
| P8954031 |
Professional Products |
$216.98 |
|
|
|
|
|
1964-1970 Ford Falcon Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; dual plane manifold; Features an open area under the plenum chamber that provides a flow of cooling air which keeps the temperature of the air/fuel charge lower to produce more power and torque; With cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8954025 |
Professional Products |
$268.03 |
|
|
|
|
|
1965 Ford Falcon Sedan Delivery Professional Products - Professional Products Hurricane Intake Manifold
PROFESSIONAL PRODUCTS HURRICANE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 3500 to 8000 RPM power range; 1.07 in. x 2.13 in. port size; Rectangular port; Single plane manifold; Designed for serious street application using stock cast-iron or windsor style cylinder heads; Features bosses that can be drilled and tapped for nitrous, rear water crossover passage, four corner tapped water ports, 1/8 NPT vacuum port under the carb flange; Recommended intake gasket part number 54600 or Fel-Pro part number 1250.
| Part Number |
Brand |
Price |
|
| P8954031 |
Professional Products |
$216.98 |
|
|
|
|
|
1965 Ford Falcon Sedan Delivery Professional Products - Professional Products Typhoon Intake Manifold
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- 50-state legal; 1500 to 6500 RPM power range; Rectangular port; This manifold is a dual plane 180-degree medium high rise design that delivers outstanding street or race performance across while retaining good throttle response; Has a rear water crossover with the two extra NPT ports and features nitrous bosses; Uses a square bore 600 CFM carb for street performance and 750 CFM carb for race application; Non-EGR compatible; Used with intake gasket part number 54600; Torque manifold bolts to 15 to 18 lb.-ft. only.
| Part Number |
Brand |
Price |
|
| P8954001 |
Professional Products |
$179.34 |
|
|
|
|
|
1965 Ford Falcon Sedan Delivery Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8954026 |
Professional Products |
$207.88 |
|
|
|
|
|
1965 Ford Falcon Sedan Delivery Professional Products - Professional Products Typhoon Intake Manifold
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- 50-state legal; 1500 to 6500 RPM power range; Rectangular port; A dual plane 180-degree medium high rise design that delivers outstanding street or race performance across while retaining good throttle response; Has a rear water crossover with the two extra NPT ports and features nitrous bosses; Uses a square bore 600 CFM carb for street performance and 750 CFM carb for race application; Non-EGR compatible; Used with intake gasket part number 54600; Torque manifold bolts to 15 to 18 lb.-ft. only.
| Part Number |
Brand |
Price |
|
| P8954000 |
Professional Products |
$218.32 |
|
|
|
|
|
1965 Ford Falcon Sedan Delivery Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; dual plane manifold; Features an open area under the plenum chamber that provides a flow of cooling air which keeps the temperature of the air/fuel charge lower to produce more power and torque; With cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8954025 |
Professional Products |
$268.03 |
|
|
|
|
|
1968-1970 Ford Falcon Edelbrock Intake Manifold Gasket
EDELBROCK BASE AND PLENUM COVER GASKETS, SET OF 2 -- High quality base and plenum cover gaskets; For use with Edelbrock part numbers 2945 and 3887.
| Part Number |
Brand |
Price |
|
| E117232 |
Edelbrock |
$8.99 |
|
|
