|
|
1974 Ford F-100 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
 |
| FPMS901101 |
Felpro |
$30.80 |
|
|
|
|
|
1974 Ford F-100 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90145 |
Felpro |
$12.05 |
|
|
|
|
|
1960-1974 Ford F-100 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90145 |
Felpro |
$12.05 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS901031 |
Felpro |
$13.48 |
|
|
|
|
|
1973 Ford F-100 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS901101 |
Felpro |
$30.80 |
|
|
|
|
|
1955-1965 Ford F-100 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS9361B1 |
Felpro |
$12.94 |
|
|
|
|
|
1954-1955 Ford F-100 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS9243B |
Felpro |
$9.05 |
|
|
|
|
|
1953-1954 Ford F-100 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS8903 |
Felpro |
$11.86 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer RPM 302, Intake Manifold, Designed For Great Top End Power With Good Throttle Response, High Rise, Dual Plane, Non-EGR, 1500-6500rpm, Air-Gap 302, Cast Finish, Recommend FelPro Gasket Part Number 1250 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117121 |
Edelbrock |
$215.61 |
|
|
|
|
|
1973-1974 Ford F-100 Pickup Edelbrock - Edelbrock Victor 460 Intake Manifold
EDELBROCK VICTOR 460 MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 8000 rpm; 6.3 in. height; 2.16 x 1.88 in. port exit with enough extra material to open it up to the cast iron Cobra-Jet heads; Ideal for drag racing, marine or any application requiring maximum power up to 8000 rpm; Designed for Ford 429/460 competition engines using Cobra-Jet cast iron, SVO Cobra-Jet aluminum (M-6049-A429), or the Edelbrock 460 CJ aluminum heads; Standard 429/460 cast iron heads will require port matching of the head to fit manifold; For 4500 series carburetors; Will not fit late-model production heads 1988 and later.
| Part Number |
Brand |
Price |
|
| E112966 |
Edelbrock |
$337.96 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap 302, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, With Nitrous Bosses, Endurashine Chrome, Recommend FelPro Gasket Part Number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1175214 |
Edelbrock |
$419.91 |
|
|
|
|
|
1974 Ford F-100 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 390, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, Cast Finish, Will not Accept Stock Motorcraft Spread-Bore Carburetor, Recommend FelPro Gasket Part number 1247 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E112105 |
Edelbrock |
$351.86 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Edelbrock Intake Manifold
EDELBROCK PERFORMER SERIES MANIFOLD, ALUMINUM, ENDURASHINE, SOLD INDIVIDUALLY -- 50-state legal; Designed for street 289-302 c.i.d. Ford V8; Features dual-plane high rise manifold which provide excellent high rpm power while retaining throttle response; No provisions for exhaust heated choke; Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission unless used with Lokar bracket SRK-4000.
| Part Number |
Brand |
Price |
|
| E1171214 |
Edelbrock |
$354.88 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 289, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, OEM, Cast Finish, Recommend FelPro Gasket Part number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E112121 |
Edelbrock |
$192.87 |
|
|
|
|
|
1968-1974 Ford F-100 Pickup Edelbrock - Edelbrock Victor FE Intake Manifold
EDELBROCK VICTOR FE MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 4000 to 8000 rpm; 6.49 in. height; Includes machined rear breather boss, unmachined nitrous bosses, and front oil fill tube boss; Single-plane manifold; Designed for high performance 390-406-410-427-428 c.i.d. Ford FE engines; Provides race-winning power for many types of competition; Runners have plenty of material for port matching to low or medium riser style heads; Carburetor flange height is equal to the Ford high-riser manifold part number C4AE-9424-G to fit under 427 Cobra hoods; For 4500 series carburetors; Match perfectly with Edelbrock FE heads; Will not fit 427 high-riser and tunnel-port heads; Recommended to use Fel-Pro intake gasket part number 1247.
| Part Number |
Brand |
Price |
|
| E112937 |
Edelbrock |
$638.16 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap 302, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, With Nitrous Bosses, Cast Finish, Recommend FelPro Gasket Part Number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117521 |
Edelbrock |
$291.45 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 289, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, OEM, Endurashine, Recommend FelPro Gasket Part number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121214 |
Edelbrock |
$314.15 |
|
|
|
|
|
1968-1974 Ford F-100 Pickup Edelbrock - Edelbrock Victor FE Intake Manifold
EDELBROCK VICTOR FE MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 4000 to 8000 rpm; 6.49 in. height; Includes machined rear breather boss, unmachined nitrous bosses, and front oil fill tube boss; Single-plane manifold; Designed for high performance 390-406-410-427-428 c.i.d. Ford FE engines; Provides race-winning power for many types of competition; Runners have plenty of material for port matching to low or medium riser style heads; Carburetor flange height is equal to the Ford high-riser manifold part number C4AE-9424-G to fit under 427 Cobra hoods; For square-bore carburetors; Match perfectly with Edelbrock FE heads; Will not fit 427 high-riser and tunnel-port heads; Recommended to use Fel-Pro intake gasket part number 1247.
| Part Number |
Brand |
Price |
|
| E112936 |
Edelbrock |
$626.07 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 289, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, OEM, Polished Finish, Recommend FelPro Gasket Part number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121211 |
Edelbrock |
$426.38 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Edelbrock - Edelbrock Victor JR. Intake Manifold
EDELBROCK VICTOR JR. 302 MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 8000 rpm; 5.5 in. height; 1.9 x 1.08 in. port exit with enough extra material to open it up to 2.10 x 1.18 in.; Without rear water crossover; Designed for competition engines using modified stock cast iron or aftermarket Windsor style cylinder heads; Recommended to use Edelbrock intake gasket part number 7220 or Fel-Pro intake gasket part number 1262.
| Part Number |
Brand |
Price |
|
| E112921 |
Edelbrock |
$291.17 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Edelbrock - Edelbrock Performer RPM Air-gap Intake Manifold
EDELBROCK PERFORMER RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 50-state legal; 4.85 in. x 5.7 in. height; Provides performance improvement throughout its rpm range; Taller than the low-profile F-28 intake; The large runners feature the unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge and more horsepower; Designed for 289-302 small-block Fords.
| Part Number |
Brand |
Price |
|
| E1175354 |
Edelbrock |
$409.04 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- 0.31 in. -18 x 2 in. socket head; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds.
| Part Number |
Brand |
Price |
|
| G12958G |
Mr Gasket |
$11.48 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Mr Gasket Intake Manifold Bolt Set
MR GASKET SUPER INTAKE MANIFOLD BOLTS, BLACK, SET OF 12 -- 5/16-18 in. thread size; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds.
| Part Number |
Brand |
Price |
|
| G126082 |
Mr Gasket |
$21.04 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .3125-18 x 2 Hex Head Bolts And Twelve .3125" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125006 |
Mr Gasket |
$25.25 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Professional Products - Professional Products Typhoon Intake Manifold
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- 50-state legal; 1500 to 6500 RPM power range; Rectangular port; This manifold is a dual plane 180-degree medium high rise design that delivers outstanding street or race performance across while retaining good throttle response; Has a rear water crossover with the two extra NPT ports and features nitrous bosses; Uses a square bore 600 CFM carb for street performance and 750 CFM carb for race application; Non-EGR compatible; Used with intake gasket part number 54600; Torque manifold bolts to 15 to 18 lb.-ft. only.
| Part Number |
Brand |
Price |
|
| P8954001 |
Professional Products |
$179.34 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Professional Products - Professional Products Hurricane Intake Manifold
PROFESSIONAL PRODUCTS HURRICANE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 3500 to 8000 RPM power range; 1.07 in. x 2.13 in. port size; Rectangular port; Single plane manifold; Designed for serious street application using stock cast-iron or windsor style cylinder heads; Features bosses that can be drilled and tapped for nitrous, rear water crossover passage, four corner tapped water ports, 1/8 NPT vacuum port under the carb flange; Recommended intake gasket part number 54600 or Fel-Pro part number 1250.
| Part Number |
Brand |
Price |
|
| P8954031 |
Professional Products |
$216.98 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Professional Products - Professional Products Typhoon Intake Manifold
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- 50-state legal; 1500 to 6500 RPM power range; Rectangular port; A dual plane 180-degree medium high rise design that delivers outstanding street or race performance across while retaining good throttle response; Has a rear water crossover with the two extra NPT ports and features nitrous bosses; Uses a square bore 600 CFM carb for street performance and 750 CFM carb for race application; Non-EGR compatible; Used with intake gasket part number 54600; Torque manifold bolts to 15 to 18 lb.-ft. only.
| Part Number |
Brand |
Price |
|
| P8954000 |
Professional Products |
$218.32 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8954026 |
Professional Products |
$207.88 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; dual plane manifold; Features an open area under the plenum chamber that provides a flow of cooling air which keeps the temperature of the air/fuel charge lower to produce more power and torque; With cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8954025 |
Professional Products |
$268.03 |
|
|
|
|
|
1965-1974 Ford F-100 Pickup Felpro Intake & Exhaust Manifold Gasket
FELPRO INTAKE AND EXHAUST MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake and exhaust manifold gasket set.
| Part Number |
Brand |
Price |
|
| FPMS901571 |
Felpro |
$10.94 |
|
|
|
|
|
1965-1974 Ford F-100 Pickup Edelbrock Intake Manifold Gasket
EDELBROCK INTAKE MANIFOLD GASKET -- 0.06 in. thickness; 1.20 in. x 2.10 in. port; Features MP-2N Microspore technology that does not use solvents; Has a synthetic fiber composite that is designed to conform to any imperfections on the sealing surface when compressed; Nitrile bead around each port opening makes the seal even better; Designed for use with Edelbrock Performer and Performer RPM cylinder heads and manifolds.
| Part Number |
Brand |
Price |
|
| E117224 |
Edelbrock |
$15.69 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Edelbrock Intake Manifold Gasket
EDELBROCK BASE AND PLENUM COVER GASKETS, SET OF 2 -- High quality base and plenum cover gaskets; For use with Edelbrock part numbers 2945 and 3887.
| Part Number |
Brand |
Price |
|
| E117232 |
Edelbrock |
$8.99 |
|
|
|
|
|
1973-1974 Ford F-100 Pickup Edelbrock Intake Manifold Gasket
Intake Manifold Gasket, Designed To Match With Performer Series Manifolds And Heads, Offer A Perfect Fit For Better Flow, Sealing, Easier Installation And Removal
| Part Number |
Brand |
Price |
|
| E117223 |
Edelbrock |
$14.86 |
|
|
|
|
1969-1974 Ford F-100 Pickup Edelbrock Intake Manifold Gasket
Intake Manifold Gasket, Designed To Match With Performer Series Manifolds And Heads, Offer A Perfect Fit For Better Flow, Sealing, Easier Installation And Removal
| Part Number |
Brand |
Price |
|
| E117220 |
Edelbrock |
$16.45 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Holley Intake Manifold Gasket
INTAKE MANIFOLD GASKET, FOR SYSTEMAX MANIFOLD -- Excellent Seating And Sealing Characteristics, Made Kormetal, Goes Between Upper And Lower Manifold
| Part Number |
Brand |
Price |
|
| H1910880 |
Holley |
$19.78 |
|
|
|
|
|
1970-1974 Ford F-100 Pickup Victor Intake Manifold Gasket
VICTOR INTAKE MANIFOLD GASKET KIT -- A high quality, OE replacement intake manifold gasket kit; Replaces OE numbers Z1806, Z2713, C2OE 9441, C2OE 9441-B, C2OE 9441-D, C2OE 9441C, C2OZ 9433-A, C2OZ 9441-A, C2OZ 9441-A2, C3AZ 9433-B, C3AZ 9433-D, C3AZ 9433-H, C3AZ 9441-A, C3AZ 9441-C, C5OE 9439-A4, and D1AZ 9433-B.
| Part Number |
Brand |
Price |
|
| VICMS15172 |
Victor |
$9.62 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Mr Gasket Intake Manifold Gasket
MR GASKET ULTRA-SEAL INTAKE MANIFOLD GASKET SET -- 1.20 in. x 2.13 in. port dimensions, 0.0625 in. thick; Stock port; Manufactured from cellulose/nitrile composition gasket material; Provides excellent sealing and durability; Features silicone beading on both sides of each gasket; Gasket sealer not required for installation; For OE replacement, high performance street, drag race, and oval track; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G125831 |
Mr Gasket |
$18.70 |
|
|
|
|
|
1973-1974 Ford F-100 Pickup Mr Gasket Intake Manifold Gasket
MR GASKET ULTRA-SEAL INTAKE MANIFOLD GASKET SET -- 2.00 in. x 2.26 in. port dimensions, 0.0625 in. thick; Stock port; Made of a new material that is less compressible; Has an anti-stick graphite coating; Do not have the silicone bead around the ports; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G125838 |
Mr Gasket |
$24.38 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Mr Gasket Intake Manifold Gasket
MR GASKET ULTRA-SEAL INTAKE MANIFOLD GASKET SET -- 1.21 in. x 2.11 in. port dimensions, 0.0625 in. thick; Stock port; Manufactured from cellulose/nitrile composition gasket material; Provides excellent sealing and durability; Features silicone beading on both sides of each gasket; Gasket sealer not required for installation; For OE replacement, high performance street, drag race, and oval track; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G125832 |
Mr Gasket |
$22.64 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Professional Products Intake Manifold Bolt Set
PROFESSIONAL PRODUCTS INTAKE MANIFOLD BOLT SET -- A 12-Point Stainless Steel Intake Manifold Bolt Kit For Big Block, Includes Manufacturer's One Year Limited Warranty
| Part Number |
Brand |
Price |
|
| P8954120 |
Professional Products |
$21.57 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup DNJ Intake Manifold Gasket
DNJ INTAKE MANIFOLD GASKET KIT -- A high quality, OE replacement intake manifold gasket kit.
| Part Number |
Brand |
Price |
|
| DNJIG4112 |
DNJ |
$14.03 |
|
|
|
|
|
1961-1974 Ford F-100 Pickup Edelbrock Intake Manifold Bolt Set
EDELBROCK INTAKE MANIFOLD BOLT KIT -- Includes cadmium finished steel bolts and hardened washers; Feature reduced hex heads for easy wrench access; Designed specifically for Edelbrock manifolds.
| Part Number |
Brand |
Price |
|
| E118524 |
Edelbrock |
$26.78 |
|
|
|
|
|
1965-1974 Ford F-100 Pickup Mr Gasket Intake Manifold Gasket
MR GASKET INTAKE MANIFOLD GASKET SET, 2 PIECES -- 1.55' x 1.78' Port Dimensions, Made From High-Quality Cellulose/Nitrile Composition Gasket Material, Provides Excellent Sealing And Durability, Can Be Trimmed If Needed For Modified Ports, Ideal For OE Replacement, High Performance Street Use, Drag Racing, Or Oval Track Racing, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G12260 |
Mr Gasket |
$14.89 |
|
|
|
|
|
1973-1974 Ford F-100 Pickup Edelbrock Intake Manifold Bolt Set
EDELBROCK INTAKE MANIFOLD BOLT KIT -- Includes cadmium finished steel bolts and hardened washers; Feature reduced hex heads for easy wrench access; Designed specifically for Edelbrock manifolds.
| Part Number |
Brand |
Price |
|
| E118569 |
Edelbrock |
$32.06 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Mr Gasket Intake Manifold Gasket
MR GASKET INTAKE MANIFOLD GASKET SET, 2 PIECES -- 1.20' x 2.13' Port Dimensions, .125 Thick, Made From High-Quality Cellulose/Nitrile Composition Gasket Material, Provides Excellent Sealing And Durability, Can Be Trimmed If Needed For Modified Ports, Ideal For OE Replacement, High Performance Street Use, Drag Racing, Or Oval Track Racing, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G12213 |
Mr Gasket |
$26.13 |
|
|
|
|
|
1973-1974 Ford F-100 Pickup Weiand Intake Manifold
WEIAND STEALTH SERIES INTAKE MANIFOLD, SATIN FINISH -- Single 4 Barrel Manifold, Non-EGR, Power Band To 6800 RPM, Combines The Low-End Throttle Response Of A 180 Degree Design With The Top-End Power Of A Single Plane Manifold, Everbright
| Part Number |
Brand |
Price |
|
| W208012 |
Weiand |
$236.07 |
|
|
|
|
|
1973-1974 Ford F-100 Pickup Mr Gasket Intake Manifold Gasket
MR GASKET SUPER ULTRA-SEAL III INTAKE MANIFOLD GASKET SET -- 2 in. x 2.26 in. port dimensions, 0.0625 in. thick; Stock port; Made from custom-engineered copolymer binder system which holds fibers and fillers together; Reinforced with synthetic fillers to produce a uniform, high-strength composite sealing material; Provides excellent sealing and durability; Can be trimmed if needed for modified ports; Ideal for OE replacement, high performance street use, drag racing, or oval track racing; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G124685G |
Mr Gasket |
$24.37 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Weiand - Weiand Air RAM EFI Intake Manifold
WEIAND ACTION PLUS INTAKE MANIFOLD, SATIN FINISH -- 3.82 in. height x 4.75 in. rear; 1.82 in. x 1.02 in. port size; Idle to 5500 RPM power band; Square bore carburetor flange; A completely new design optimized for bigger engines; Features the industry's leading Computational Fluid Dynamics or CFD airflow design software used for maximized air-fuel distribution and power; Its low rise and 180 degrees dual plane intake style builds maximum torque for street performance engines; Offers lighter, smoother, better looking, and more consistent castings constructed through permanent mold casting process; With Fully CNC machined structure for a perfect fit; Designed to accept most stock hardware or all aftermarket square-bore carburetors with manual or electric chokes; Few alterations may be required; Has additional vacuum tap off of runner for brake booster/AC needs; Legal only for off-highway use, racing use, or for use on pre-emission controlled motor vehicles; Not legal for street use with a 4-barrel in California on vehicles equipped with a 2-barrel carburetor, for which there was no 4-barrel option; Recommended Fel-Pro Gasket part number 1250; Use Holley Street Avenger carb series in 570 or 670 CFM or universal carburetor installation kit part number 20-124 for best performance; With Weiand's limited warranty.
| Part Number |
Brand |
Price |
|
| W208124 |
Weiand |
$145.51 |
|
|
|
|
|
1973-1974 Ford F-100 Pickup Mr Gasket Intake Manifold Gasket
MR GASKET INTAKE MANIFOLD GASKET SET, 2 PIECES -- 2.00'' x 2.26'' Port Dimensions, .0625'' Thick, Made From High-Quality Cellulose/Nitrile Composition Gasket Material, Provides Excellent Sealing And Durability, Can Be Trimmed If Needed For Modified Ports, Ideal For OE Replacement, High Performance Street Use, Drag Racing, Or Oval Track Racing, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G12208G |
Mr Gasket |
$18.28 |
|
|
|
|
|
1969-1974 Ford F-100 Pickup Mr Gasket Intake Manifold Gasket
MR GASKET INTAKE MANIFOLD GASKET SET, 2 PIECES -- 1.20'' x 2.13'' Port Dimensions, .0625 Thick, Made From High-Quality Cellulose/Nitrile Composition Gasket Material, Provides Excellent Sealing And Durability, Can Be Trimmed If Needed For Modified Ports, Ideal For OE Replacement, High Performance Street Use, Drag Racing, Or Oval Track Racing, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G12203G |
Mr Gasket |
$13.04 |
|
|
