|
|
1987-1991 Ford Country Squire Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Lower Set, Upper Set Included, Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
 |
| FPMS93334 |
Felpro |
$14.23 |
|
|
|
|
|
1969-1974 Ford Country Squire Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS901101 |
Felpro |
$30.80 |
|
|
|
|
|
1974 Ford Country Squire Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS90116 |
Felpro |
$14.29 |
|
|
|
|
|
1974 Ford Country Squire Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS901031 |
Felpro |
$13.48 |
|
|
|
|
|
1962-1973 Ford Country Squire Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS901031 |
Felpro |
$13.48 |
|
|
|
|
|
1969-1973 Ford Country Squire Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS90116 |
Felpro |
$14.29 |
|
|
|
|
|
1963-1971 Ford Country Squire Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS901161 |
Felpro |
$17.09 |
|
|
|
|
|
1958-1971 Ford Country Squire Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90145 |
Felpro |
$12.05 |
|
|
|
|
|
1968-1971 Ford Country Squire Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS901031 |
Felpro |
$13.48 |
|
|
|
|
|
1964-1968 Ford Country Squire Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90145 |
Felpro |
$12.05 |
|
|
|
|
|
1963-1968 Ford Country Squire Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS901031 |
Felpro |
$13.48 |
|
|
|
|
|
1955-1962 Ford Country Squire Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS9361B1 |
Felpro |
$12.94 |
|
|
|
|
|
1958-1960 Ford Country Squire Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90145 |
Felpro |
$12.05 |
|
|
|
|
|
1954 Ford Country Squire Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS9243B |
Felpro |
$9.05 |
|
|
|
|
|
1950-1953 Ford Country Squire Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS8903 |
Felpro |
$11.86 |
|
|
|
|
|
1969-1972 Ford Country Squire Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 351-W, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, Non-EGR, Idle-5500 RPM, Cast Finish, Recommended Gaskets FelPro Gasket Part number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E112181 |
Edelbrock |
$244.50 |
|
|
|
|
|
1963-1972 Ford Country Squire Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer RPM 302, Intake Manifold, Designed For Great Top End Power With Good Throttle Response, High Rise, Dual Plane, Non-EGR, 1500-6500rpm, Air-Gap 302, Cast Finish, Recommend FelPro Gasket Part Number 1250 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117121 |
Edelbrock |
$215.61 |
|
|
|
|
|
1963-1991 Ford Country Squire Edelbrock - Edelbrock Victor JR. Intake Manifold
EDELBROCK VICTOR JR. 302 MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 8000 rpm; 5.5 in. height; 1.9 x 1.08 in. port exit with enough extra material to open it up to 2.10 x 1.18 in.; Without rear water crossover; Designed for competition engines using modified stock cast iron or aftermarket Windsor style cylinder heads; Recommended to use Edelbrock intake gasket part number 7220 or Fel-Pro intake gasket part number 1262.
| Part Number |
Brand |
Price |
|
| E112921 |
Edelbrock |
$291.17 |
|
|
|
|
|
1963-1991 Ford Country Squire Edelbrock - Edelbrock Performer RPM Air-gap Intake Manifold
EDELBROCK PERFORMER RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 50-state legal; 4.85 in. x 5.7 in. height; Provides performance improvement throughout its rpm range; Taller than the low-profile F-28 intake; The large runners feature the unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge and more horsepower; Designed for 289-302 small-block Fords.
| Part Number |
Brand |
Price |
|
| E1175354 |
Edelbrock |
$409.04 |
|
|
|
|
|
1969-1974 Ford Country Squire Edelbrock - Edelbrock Super Victor Intake Manifold
EDELBROCK SUPER VICTOR 9.2 MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 4500 to 8500 rpm; 5.95 in. height; Includes nitrous and rear cooling water bosses; Single-plane manifold; Designed for high-rpm, large displacement, and competition 351-Windsor Fords; Engineered for square-bore carburetor; Runners have 3.10 square in. cross sectional area; Has 0.34 in. carburetor pad; Ideal for drag racing or oval track engines; For engines with 9.2 in. deck height; Recommended to use Fel-Pro intake gasket part numbers 1262 or 1262R.
| Part Number |
Brand |
Price |
|
| E112929 |
Edelbrock |
$426.17 |
|
|
|
|
|
1971-1974 Ford Country Squire Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 400, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, Non-EGR, Idle-5500 RPM, Cast Finish, Recommended Gaskets FelPro Gasket Part number MS96020 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E112171 |
Edelbrock |
$270.54 |
|
|
|
|
|
1968-1974 Ford Country Squire Edelbrock - Edelbrock Victor 460 Intake Manifold
EDELBROCK VICTOR 460 MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 8000 rpm; 6.3 in. height; 2.16 x 1.88 in. port exit with enough extra material to open it up to the cast iron Cobra-Jet heads; Ideal for drag racing, marine or any application requiring maximum power up to 8000 rpm; Designed for Ford 429/460 competition engines using Cobra-Jet cast iron, SVO Cobra-Jet aluminum (M-6049-A429), or the Edelbrock 460 CJ aluminum heads; Standard 429/460 cast iron heads will require port matching of the head to fit manifold; For 4500 series carburetors; Will not fit late-model production heads 1988 and later.
| Part Number |
Brand |
Price |
|
| E112966 |
Edelbrock |
$337.96 |
|
|
|
|
|
1969-1974 Ford Country Squire Edelbrock - Edelbrock Super Victor 351-w Intake Manifold
EDELBROCK SUPER VICTOR 351-W MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 4500 to 8500 rpm; 6.25 in. height; Designed for high rpm or large displacement competition 351 Windsor Ford V8s with a deck height of 9.5 in. which are used in drag racing or oval track engines; Features 3.2 square in. runners for cross sectional area; Can be used with ported factory cast iron heads; Aftermarket aluminum heads are recommended, such as Edelbrock Victor Jr. part number 77169 or Victor heads part number 77219 for ultra high-horsepower; Recommended to use Fel-Pro intake gasket part numbers 1262 or 1262R; MSD distributor part number 8578 must be used to clear the front water crossover.
| Part Number |
Brand |
Price |
|
| E112924 |
Edelbrock |
$346.17 |
|
|
|
|
|
1969-1974 Ford Country Squire Edelbrock - Edelbrock Victor JR. Intake Manifold
EDELBROCK VICTOR JR. 351-W MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 7500 rpm; 5.75 in. height; Features 2.70 square in. runners cross sectional area; Ideal for both oval track and drag racing engines; Designed for competition 351 Windsor Ford V8s from 1969 and later with Edelbrock Performer RPM heads number 60259, Victor Jr. head number 77169, Victor head number 77219 or similar heads; Fits standard 351W blocks with a 9.5 in. deck height.
| Part Number |
Brand |
Price |
|
| E112981 |
Edelbrock |
$339.25 |
|
|
|
|
|
1969-1974 Ford Country Squire Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 460, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb With Electric Choke, Cast Finish, Will not Accept Stock Motorcraft Spread-Bore Carburetor, Recommend Gasket FelPro Gasket Part number MS96018 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E112166 |
Edelbrock |
$276.56 |
|
|
|
|
|
1969-1974 Ford Country Squire Edelbrock - Edelbrock Super Victor Intake Manifold
EDELBROCK SUPER VICTOR EFI MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 4500 to 8500 rpm; 6.25 in. height; Designed for high rpm or large displacement competition 351 Windsor Ford V8s with a deck height of 9.5 in. which are used in drag racing or oval track engines; Features 3.5 square in. runners cross sectional area.
| Part Number |
Brand |
Price |
|
| E1129245 |
Edelbrock |
$380.93 |
|
|
|
|
|
1972-1974 Ford Country Squire Edelbrock Intake Manifold
EDELBROCK RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Designed for street and high performance 351-400 c.i.d. 351-W Ford V8s, the RPM Air-Gap incorporates the same race-winning design that's been used on our Victor Series competition intakes for years; The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power; Larger cross sectional area and a taller carb flange with large displacement, stroker 351-W based engines; Includes nitrous bosses; No provision for exhaust heated chokes and no exhaust crossover; Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission unless used with Lokar bracket SRK-4000.
| Part Number |
Brand |
Price |
|
| E1175814 |
Edelbrock |
$447.35 |
|
|
|
|
|
1971-1974 Ford Country Squire Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap 351-C, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, Ford 351C
| Part Number |
Brand |
Price |
|
| E117564 |
Edelbrock |
$400.92 |
|
|
|
|
|
1969-1974 Ford Country Squire Edelbrock - Edelbrock Glidden Victor 351w Intake Manifold
EDELBROCK GLIDDEN VICTOR 351W MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 6.97 in. A x 6.97 in. B height; Developed in conjunction with noted drag racer Billy Glidden; Features 4500 series carburetor pad for use with high rpm and large displacement Windsor headed small-block Ford with 9.5 in. deck height; Has 3.6 square in. runner area; Plenum has been increased to produce more high rpm power; Eliminates the front water cross-over to maintain optimum runner shape and location; Recommended to use Fel-Pro intake gasket part numbers 1262 or 1262R.
| Part Number |
Brand |
Price |
|
| E112828 |
Edelbrock |
$405.95 |
|
|
|
|
|
1969-1974 Ford Country Squire Edelbrock Intake Manifold
EDELBROCK RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 50-state legal; 4.85/5.70 in. taller than the 5435; Carb center to center is 6 7/16 in.; Because of carb clearance, only the MSD Small-cap distributor can be used; We used MSD 8579 in our dyno testing, but MSD 8352 may also work (fit with an 8352 has NOT been verified, but it is the same diameter as 8352, only taller to accommodate the vacuum advance module).
| Part Number |
Brand |
Price |
|
| E1175854 |
Edelbrock |
$468.01 |
|
|
|
|
|
1974 Ford Country Squire Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 400 EGR, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Idle-5500 RPM, For 2 or 4 Barrel Carbs With Adapter, Cast Finish, For Off-Highway Non-EGR Apps, Use Part number 8714 Spacer
| Part Number |
Brand |
Price |
|
| E113771 |
Edelbrock |
$367.45 |
|
|
|
|
|
1969-1974 Ford Country Squire Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 460, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, EGR, Idle-5500 RPM, For 4 Barrel Carb, With Electric Choke, Cast Finish, Will not Accept Stock Motorcraft Spread-Bore Carburetor, Must Use Stock EGR Plate
| Part Number |
Brand |
Price |
|
| E113766 |
Edelbrock |
$353.41 |
|
|
|
|
|
1972-1974 Ford Country Squire Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap 351-W, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For Stroker 351W Based Engines, Cast Finish, No Provisions For Choke Or Rear Water Crossover, Recommend FelPro Gasket Part Number 1250 for Manifold Gasket, Use 12-Bolt Intake Gasket Set, Recommend Part Number 7220
| Part Number |
Brand |
Price |
|
| E117581 |
Edelbrock |
$324.38 |
|
|
|
|
|
1961-1973 Ford Country Squire Edelbrock - Edelbrock Victor FE Intake Manifold
EDELBROCK VICTOR FE MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 4000 to 8000 rpm; 6.49 in. height; Includes machined rear breather boss, unmachined nitrous bosses, and front oil fill tube boss; Single-plane manifold; Designed for high performance 390-406-410-427-428 c.i.d. Ford FE engines; Provides race-winning power for many types of competition; Runners have plenty of material for port matching to low or medium riser style heads; Carburetor flange height is equal to the Ford high-riser manifold part number C4AE-9424-G to fit under 427 Cobra hoods; For square-bore carburetors; Match perfectly with Edelbrock FE heads; Will not fit 427 high-riser and tunnel-port heads; Recommended to use Fel-Pro intake gasket part number 1247.
| Part Number |
Brand |
Price |
|
| E112936 |
Edelbrock |
$626.07 |
|
|
|
|
|
1961-1973 Ford Country Squire Edelbrock - Edelbrock Victor FE Intake Manifold
EDELBROCK VICTOR FE MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 4000 to 8000 rpm; 6.49 in. height; Includes machined rear breather boss, unmachined nitrous bosses, and front oil fill tube boss; Single-plane manifold; Designed for high performance 390-406-410-427-428 c.i.d. Ford FE engines; Provides race-winning power for many types of competition; Runners have plenty of material for port matching to low or medium riser style heads; Carburetor flange height is equal to the Ford high-riser manifold part number C4AE-9424-G to fit under 427 Cobra hoods; For 4500 series carburetors; Match perfectly with Edelbrock FE heads; Will not fit 427 high-riser and tunnel-port heads; Recommended to use Fel-Pro intake gasket part number 1247.
| Part Number |
Brand |
Price |
|
| E112937 |
Edelbrock |
$638.16 |
|
|
|
|
|
1963-1972 Ford Country Squire Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 289, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, OEM, Cast Finish, Recommend FelPro Gasket Part number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E112121 |
Edelbrock |
$192.87 |
|
|
|
|
|
1963-1972 Ford Country Squire Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 289, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, OEM, Polished Finish, Recommend FelPro Gasket Part number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121211 |
Edelbrock |
$426.38 |
|
|
|
|
|
1963-1972 Ford Country Squire Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 289, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, OEM, Endurashine, Recommend FelPro Gasket Part number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121214 |
Edelbrock |
$314.15 |
|
|
|
|
|
1963-1972 Ford Country Squire Edelbrock Intake Manifold
EDELBROCK PERFORMER SERIES MANIFOLD, ALUMINUM, ENDURASHINE, SOLD INDIVIDUALLY -- 50-state legal; Designed for street 289-302 c.i.d. Ford V8; Features dual-plane high rise manifold which provide excellent high rpm power while retaining throttle response; No provisions for exhaust heated choke; Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission unless used with Lokar bracket SRK-4000.
| Part Number |
Brand |
Price |
|
| E1171214 |
Edelbrock |
$354.88 |
|
|
|
|
|
1963-1972 Ford Country Squire Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap 302, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, With Nitrous Bosses, Cast Finish, Recommend FelPro Gasket Part Number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117521 |
Edelbrock |
$291.45 |
|
|
|
|
|
1963-1972 Ford Country Squire Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap 302, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, With Nitrous Bosses, Endurashine Chrome, Recommend FelPro Gasket Part Number 1250 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1175214 |
Edelbrock |
$419.91 |
|
|
|
|
|
1958-1970 Ford Country Squire Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 390, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For 4 Barrel Carb, Cast Finish, Will not Accept Stock Motorcraft Spread-Bore Carburetor, Recommend FelPro Gasket Part number 1247 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E112105 |
Edelbrock |
$351.86 |
|
|
|
|
|
1963-1991 Ford Country Squire Mr Gasket Intake Manifold Bolt Set
MR GASKET SUPER INTAKE MANIFOLD BOLTS, BLACK, SET OF 12 -- 5/16-18 in. thread size; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds.
| Part Number |
Brand |
Price |
|
| G126082 |
Mr Gasket |
$21.04 |
|
|
|
|
|
1963-1991 Ford Country Squire Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- 0.31 in. -18 x 2 in. socket head; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds.
| Part Number |
Brand |
Price |
|
| G12958G |
Mr Gasket |
$11.48 |
|
|
|
|
|
1963-1974 Ford Country Squire Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .3125-18 x 2 Hex Head Bolts And Twelve .3125" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125006 |
Mr Gasket |
$25.25 |
|
|
|
|
|
1987-1991 Ford Country Squire Holley Intake Manifold
HOLLEY SYSTEMAX II EFI SERIES INTAKE MANIFOLD KIT, MIRROR FINISH -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; A Complete Manifold Kit With External EGR Passage And Basic Operating Power Band Range Of 2,000-6,500 RPM, Provides Maximum Unrestricted Air Flow, Promotes Better Fuel Efficiency, For 5.0L Engine, May Require The Evacuation Of The Air Conditioning System If The Condenser Needs To Be Removed, With Holley's Limited Warranty
| Part Number |
Brand |
Price |
|
| H1930072S |
Holley |
$727.40 |
|
|
|
|
|
1963-1991 Ford Country Squire Professional Products - Professional Products Typhoon Intake Manifold
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- 50-state legal; 1500 to 6500 RPM power range; Rectangular port; A dual plane 180-degree medium high rise design that delivers outstanding street or race performance across while retaining good throttle response; Has a rear water crossover with the two extra NPT ports and features nitrous bosses; Uses a square bore 600 CFM carb for street performance and 750 CFM carb for race application; Non-EGR compatible; Used with intake gasket part number 54600; Torque manifold bolts to 15 to 18 lb.-ft. only.
| Part Number |
Brand |
Price |
|
| P8954000 |
Professional Products |
$218.32 |
|
|
|
|
|
1963-1991 Ford Country Squire Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; dual plane manifold; Features an open area under the plenum chamber that provides a flow of cooling air which keeps the temperature of the air/fuel charge lower to produce more power and torque; With cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8954025 |
Professional Products |
$268.03 |
|
|
|
|
|
1963-1991 Ford Country Squire Professional Products - Professional Products Typhoon Intake Manifold
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- 50-state legal; 1500 to 6500 RPM power range; Rectangular port; This manifold is a dual plane 180-degree medium high rise design that delivers outstanding street or race performance across while retaining good throttle response; Has a rear water crossover with the two extra NPT ports and features nitrous bosses; Uses a square bore 600 CFM carb for street performance and 750 CFM carb for race application; Non-EGR compatible; Used with intake gasket part number 54600; Torque manifold bolts to 15 to 18 lb.-ft. only.
| Part Number |
Brand |
Price |
|
| P8954001 |
Professional Products |
$179.34 |
|
|
|
|
|
1963-1991 Ford Country Squire Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8954026 |
Professional Products |
$207.88 |
|
|
