|
|
1987-1988 Chevrolet V20 Suburban Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
 |
| FPMS93317 |
Felpro |
$14.08 |
|
|
|
|
|
1987 Chevrolet V20 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS93317 |
Felpro |
$14.08 |
|
|
|
|
|
1987 Chevrolet V20 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set.
| Part Number |
Brand |
Price |
|
| FPMS91585 |
Felpro |
$13.52 |
|
|
|
|
|
1987-1988 Chevrolet V20 Suburban Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90240 |
Felpro |
$14.77 |
|
|
|
|
|
1987-1988 Chevrolet V20 Suburban Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS91586 |
Felpro |
$18.01 |
|
|
|
|
|
1987 Chevrolet V20 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS91586 |
Felpro |
$18.01 |
|
|
|
|
|
1987-1988 Chevrolet V20 Suburban Edelbrock Intake Manifold
EDELBROCK PERFORMER SERIES MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 50-state legal; Designed for 1987-95 305-350 c.i.d. chevy throttle body injected engines; A stock replacement part for 305-350 V8s with factory T.B.I.; Accepts all OEM equipment and small-bore 1.69 in. throttle body injectors only; No chip changes or computer mods required unless entire 5.7L power package is used; Computer chip is supplied free of charge with proof of purchase of manifold, cam and heads; Will not fit caprice, buick or cadillac B bodies.
| Part Number |
Brand |
Price |
|
| E113704 |
Edelbrock |
$367.26 |
|
|
|
|
|
1987-1988 Chevrolet V20 Suburban Edelbrock - Edelbrock Victor JR. Intake Manifold
EDELBROCK VICTOR JR. SERIES INTAKE MANIFOLD, ALUMINIZED STEEL, NATURAL FINISH -- For off-road use only - Not legal for use on public roads and highways; Features low-profile that works well with minimal hood clearance and where up to 2 in. spacers can be used for performance tuning; Provides maximum performance for engine with standard port location, iron, and aluminum cylinder heads.
| Part Number |
Brand |
Price |
|
| E112975 |
Edelbrock |
$255.10 |
|
|
|
|
|
1987-1988 Chevrolet V20 Suburban Edelbrock - Edelbrock Torker II Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Torker II 302, Intake Manifold, Non-EGR, 2500-6500 RPM, Cast Finish, Recommend FelPro Gasket Part number 1250 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E115021 |
Edelbrock |
$247.31 |
|
|
|
|
|
1987 Chevrolet V20 Edelbrock - Edelbrock Victor JR. Intake Manifold
EDELBROCK VICTOR JR. SERIES INTAKE MANIFOLD, ALUMINIZED STEEL, NATURAL FINISH -- For off-road use only - Not legal for use on public roads and highways; Features low-profile that works well with minimal hood clearance and where up to 2 in. spacers can be used for performance tuning; Provides maximum performance for engine with standard port location, iron, and aluminum cylinder heads.
| Part Number |
Brand |
Price |
|
| E112975 |
Edelbrock |
$255.10 |
|
|
|
|
|
1987 Chevrolet V20 Edelbrock - Edelbrock Torker II Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Torker II 302, Intake Manifold, Non-EGR, 2500-6500 RPM, Cast Finish, Recommend FelPro Gasket Part number 1250 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E115021 |
Edelbrock |
$247.31 |
|
|
|
|
|
1987 Chevrolet V20 Edelbrock Intake Manifold
EDELBROCK PERFORMER SERIES MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 50-state legal; Designed for 1987-95 305-350 c.i.d. chevy throttle body injected engines; A stock replacement part for 305-350 V8s with factory T.B.I.; Accepts all OEM equipment and small-bore 1.69 in. throttle body injectors only; No chip changes or computer mods required unless entire 5.7L power package is used; Computer chip is supplied free of charge with proof of purchase of manifold, cam and heads; Will not fit caprice, buick or cadillac B bodies.
| Part Number |
Brand |
Price |
|
| E113704 |
Edelbrock |
$367.26 |
|
|
|
|
|
1987-1988 Chevrolet V20 Suburban Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Includes twelve 0.375 in. -16 x 1 in. hex head bolts and washers; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G12955G |
Mr Gasket |
$6.72 |
|
|
|
|
|
1987-1988 Chevrolet V20 Suburban Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- 0.375 in. -16 x 1 in. socket head; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds.
| Part Number |
Brand |
Price |
|
| G12956G |
Mr Gasket |
$6.04 |
|
|
|
|
1987-1988 Chevrolet V20 Suburban Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .375-16 x 1 Hex Head Bolts And Twelve .375" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125002 |
Mr Gasket |
$23.50 |
|
|
|
|
|
1987 Chevrolet V20 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- 0.375 in. -16 x 1 in. socket head; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds.
| Part Number |
Brand |
Price |
|
| G12956G |
Mr Gasket |
$6.04 |
|
|
|
|
|
1987 Chevrolet V20 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Includes twelve 0.375 in. -16 x 1 in. hex head bolts and washers; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G12955G |
Mr Gasket |
$6.72 |
|
|
|
|
|
1987 Chevrolet V20 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .375-16 x 1 Hex Head Bolts And Twelve .375" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125002 |
Mr Gasket |
$23.50 |
|
|
|
|
|
1987-1988 Chevrolet V20 Suburban Mr Gasket Intake Manifold Bolt Set
MR GASKET SUPER INTAKE MANIFOLD BOLT KIT, BLACK OXIDE COATED -- 3/8"-16 X 1-1/16", Consists Of 12 Bolts And Washers, Made From Grade 5 Steel For Strength And Durability, Black Oxide Coated To Resist Corrosion And Provide A Clean Professional Appearance, Features A Wide Washer Face Hex Head To Spread Clamp Force Evenly For A Positive Seal, Comes With Extra Thick Flat Washers That Provide Uniform Clamp Load And Prevent Galling On Aluminum Intake Manifolds, With Mr. Gasket's Limited Warranty
| Part Number |
Brand |
Price |
|
| G126080 |
Mr Gasket |
$14.31 |
|
|
|
|
|
1987-1988 Chevrolet V20 Suburban Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Features Twelve Point Smaller-Than-Standard Head And Flange, Includes Twelve .375- 16 x 1' Bolts And Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G126091 |
Mr Gasket |
$17.40 |
|
|
|
|
|
1987-1988 Chevrolet V20 Suburban Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .375-16 x 1 Point Head Bolts And Twelve .375" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125003 |
Mr Gasket |
$34.84 |
|
|
|
|
|
1987 Chevrolet V20 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Features Twelve Point Smaller-Than-Standard Head And Flange, Includes Twelve .375- 16 x 1' Bolts And Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G126091 |
Mr Gasket |
$17.40 |
|
|
|
|
|
1987 Chevrolet V20 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .375-16 x 1 Point Head Bolts And Twelve .375" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125003 |
Mr Gasket |
$34.84 |
|
|
|
|
|
1987 Chevrolet V20 Mr Gasket Intake Manifold Bolt Set
MR GASKET SUPER INTAKE MANIFOLD BOLT KIT, BLACK OXIDE COATED -- 3/8"-16 X 1-1/16", Consists Of 12 Bolts And Washers, Made From Grade 5 Steel For Strength And Durability, Black Oxide Coated To Resist Corrosion And Provide A Clean Professional Appearance, Features A Wide Washer Face Hex Head To Spread Clamp Force Evenly For A Positive Seal, Comes With Extra Thick Flat Washers That Provide Uniform Clamp Load And Prevent Galling On Aluminum Intake Manifolds, With Mr. Gasket's Limited Warranty
| Part Number |
Brand |
Price |
|
| G126080 |
Mr Gasket |
$14.31 |
|
|
|
|
|
1987-1988 Chevrolet V20 Suburban Holley Intake Manifold
EFI HIGH RISE DUAL PLANE INTAKE MANIFOLD -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Satin Finish, Power Band Idle to 6,000 RPM, EGR Compatible, Cast Iron Head
| Part Number |
Brand |
Price |
|
| H1930066 |
Holley |
$211.78 |
|
|
|
|
|
1987 Chevrolet V20 Holley Intake Manifold
EFI HIGH RISE DUAL PLANE INTAKE MANIFOLD -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Satin Finish, Power Band Idle to 6,000 RPM, EGR Compatible, Cast Iron Head
| Part Number |
Brand |
Price |
|
| H1930066 |
Holley |
$211.78 |
|
|
|
|
|
1987-1988 Chevrolet V20 Suburban Professional Products - Professional Products Cyclone Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; Idle to 5500 RPM power range; Casted from steel molds which provide a tighter grain casting; A great all-around street manifold for mild performance applications; Set up to accept a spread bore carburetor but comes with an adapter plane that permits the use of square bore carburetors; 100 percent pressure tested for leaks to eliminate installation problems; No EGR provisions; For standard heads application.
| Part Number |
Brand |
Price |
|
| P8952000 |
Professional Products |
$193.86 |
|
|
|
|
|
1987-1988 Chevrolet V20 Suburban Professional Products - Professional Products Cyclone Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE INTAKE MANIFOLD, ALUMINUM -- 50-state legal; Idle to 5500 RPM power range; Casted from steel molds which provide a tighter grain casting; A great all-around street manifold for mild performance applications; 100 percent pressure tested for leaks to eliminate installation problems; Set up to accept a spread bore carburetor but comes with an adapter plane that permits the use of square bore carburetors; No EGR provisions.
| Part Number |
Brand |
Price |
|
| P8952001 |
Professional Products |
$146.47 |
|
|
|
|
|
1987-1988 Chevrolet V20 Suburban Professional Products - Professional Products Typhoon Intake Manifold
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; 0.70 in. taller than cyclone intake manifold; A high performance 180-degree dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; will not work on engines with reverse water flow; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8952020 |
Professional Products |
$206.27 |
|
|
|
|
|
1987-1988 Chevrolet V20 Suburban Professional Products - Professional Products Hurricane Intake Manifold
PROFESSIONAL PRODUCTS HURRICANE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 3000 to 7500 RPM power range; A single plane 360-degree manifold design that provides optimum power in the mid to upper RPM ranges; Features a standard square bore carb flange, nitrous bosses, dual distributor hold-downs, four corner water ports and a special water flow divider; the ports are specifically positioned to provide an optimum starting point for custom porting.
| Part Number |
Brand |
Price |
|
| P8952031 |
Professional Products |
$185.10 |
|
|
|
|
|
1987-1988 Chevrolet V20 Suburban Professional Products - Professional Products Cyclone Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE INTAKE MANIFOLD, ALUMINUM -- 50-state legal; Idle to 5500 RPM power range; Casted from steel molds which provide a tighter grain casting; A great all-around street manifold for mild performance applications; Set up to accept a spread bore carburetor but comes with an adapter plane that permits the use of square bore carburetors; 100 percent pressure tested for leaks to eliminate installation problems; Features four corner water outlets and dual distributor hold-downs; With EGR provisions; Will work with a late model style water neck, alternator, HEI ignition system and air conditioning brackets.
| Part Number |
Brand |
Price |
|
| P8952009 |
Professional Products |
$163.20 |
|
|
|
|
|
1987-1988 Chevrolet V20 Suburban Professional Products - Professional Products Typhoon Intake Manifold
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; 0.70 in. taller than cyclone intake manifold; A high performance 180-degree dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; will not work on engines with reverse water flow; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8952022 |
Professional Products |
$269.00 |
|
|
|
|
|
1987-1988 Chevrolet V20 Suburban Professional Products - Professional Products Cyclone Plus Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE PLUS INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; Idle to 5500 RPM power range; 0.38 in. taller and has larger ports and runners than the standard cyclone intake manifold; Produces more power and torque; Features a built-in rear water crossover passage for better water flow and cooler engine operating temperatures, nitrous bosses and rear water ports; Uses a square bore carb flange which permits direct bolt-on of all popular holley carburetors.
| Part Number |
Brand |
Price |
|
| P8952010 |
Professional Products |
$230.59 |
|
|
|
|
|
1987-1988 Chevrolet V20 Suburban Professional Products - Professional Products Hurricane Intake Manifold
PROFESSIONAL PRODUCTS HURRICANE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 3000 to 7500 RPM power range; Consistently outperformed all of the well known brands which are also much more expensive; Numerous dyno tests have proven over and over that there is no better manifold of this type for achieving maximum power and torque while actually using less fuel doing it.
| Part Number |
Brand |
Price |
|
| P8952030 |
Professional Products |
$250.85 |
|
|
|
|
|
1987-1988 Chevrolet V20 Suburban Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; Not for exhaust heated or stock style chokes; Will not work on engines with reverse water flow.
| Part Number |
Brand |
Price |
|
| P8952028 |
Professional Products |
$200.85 |
|
|
|
|
|
1987-1988 Chevrolet V20 Suburban Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; Not for exhaust heated or stock style chokes; Will not work on engines with reverse water flow.
| Part Number |
Brand |
Price |
|
| P8952027 |
Professional Products |
$263.63 |
|
|
|
|
|
1987-1988 Chevrolet V20 Suburban Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; Not for exhaust heated or stock style chokes; Will not work on engines with reverse water flow.
| Part Number |
Brand |
Price |
|
| P8952026 |
Professional Products |
$193.21 |
|
|
|
|
|
1987-1988 Chevrolet V20 Suburban Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; Not for exhaust heated or stock style chokes; Will not work on engines with reverse water flow.
| Part Number |
Brand |
Price |
|
| P8952025 |
Professional Products |
$255.99 |
|
|
|
|
|
1987 Chevrolet V20 Professional Products - Professional Products Cyclone Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE INTAKE MANIFOLD, ALUMINUM -- 50-state legal; Idle to 5500 RPM power range; Casted from steel molds which provide a tighter grain casting; A great all-around street manifold for mild performance applications; Set up to accept a spread bore carburetor but comes with an adapter plane that permits the use of square bore carburetors; 100 percent pressure tested for leaks to eliminate installation problems; Features four corner water outlets and dual distributor hold-downs; With EGR provisions; Will work with a late model style water neck, alternator, HEI ignition system and air conditioning brackets.
| Part Number |
Brand |
Price |
|
| P8952009 |
Professional Products |
$163.20 |
|
|
|
|
|
1987 Chevrolet V20 Professional Products - Professional Products Cyclone Plus Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE PLUS INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; Idle to 5500 RPM power range; 0.38 in. taller and has larger ports and runners than the standard cyclone intake manifold; Produces more power and torque; Features a built-in rear water crossover passage for better water flow and cooler engine operating temperatures, nitrous bosses and rear water ports; Uses a square bore carb flange which permits direct bolt-on of all popular holley carburetors.
| Part Number |
Brand |
Price |
|
| P8952010 |
Professional Products |
$230.59 |
|
|
|
|
|
1987 Chevrolet V20 Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; Not for exhaust heated or stock style chokes; Will not work on engines with reverse water flow.
| Part Number |
Brand |
Price |
|
| P8952026 |
Professional Products |
$193.21 |
|
|
|
|
|
1987 Chevrolet V20 Professional Products - Professional Products Typhoon Intake Manifold
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; 0.70 in. taller than cyclone intake manifold; A high performance 180-degree dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; will not work on engines with reverse water flow; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8952020 |
Professional Products |
$206.27 |
|
|
|
|
|
1987 Chevrolet V20 Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; Not for exhaust heated or stock style chokes; Will not work on engines with reverse water flow.
| Part Number |
Brand |
Price |
|
| P8952027 |
Professional Products |
$263.63 |
|
|
|
|
|
1987 Chevrolet V20 Professional Products - Professional Products Cyclone Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; Idle to 5500 RPM power range; Casted from steel molds which provide a tighter grain casting; A great all-around street manifold for mild performance applications; Set up to accept a spread bore carburetor but comes with an adapter plane that permits the use of square bore carburetors; 100 percent pressure tested for leaks to eliminate installation problems; No EGR provisions; For standard heads application.
| Part Number |
Brand |
Price |
|
| P8952000 |
Professional Products |
$193.86 |
|
|
|
|
|
1987 Chevrolet V20 Professional Products - Professional Products Typhoon Intake Manifold
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; 0.70 in. taller than cyclone intake manifold; A high performance 180-degree dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; will not work on engines with reverse water flow; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8952022 |
Professional Products |
$269.00 |
|
|
|
|
|
1987 Chevrolet V20 Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; Not for exhaust heated or stock style chokes; Will not work on engines with reverse water flow.
| Part Number |
Brand |
Price |
|
| P8952028 |
Professional Products |
$200.85 |
|
|
|
|
|
1987 Chevrolet V20 Professional Products - Professional Products Cyclone Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE INTAKE MANIFOLD, ALUMINUM -- 50-state legal; Idle to 5500 RPM power range; Casted from steel molds which provide a tighter grain casting; A great all-around street manifold for mild performance applications; 100 percent pressure tested for leaks to eliminate installation problems; Set up to accept a spread bore carburetor but comes with an adapter plane that permits the use of square bore carburetors; No EGR provisions.
| Part Number |
Brand |
Price |
|
| P8952001 |
Professional Products |
$146.47 |
|
|
|
|
|
1987 Chevrolet V20 Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; Not for exhaust heated or stock style chokes; Will not work on engines with reverse water flow.
| Part Number |
Brand |
Price |
|
| P8952025 |
Professional Products |
$255.99 |
|
|
|
|
|
1987 Chevrolet V20 Professional Products - Professional Products Hurricane Intake Manifold
PROFESSIONAL PRODUCTS HURRICANE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 3000 to 7500 RPM power range; A single plane 360-degree manifold design that provides optimum power in the mid to upper RPM ranges; Features a standard square bore carb flange, nitrous bosses, dual distributor hold-downs, four corner water ports and a special water flow divider; the ports are specifically positioned to provide an optimum starting point for custom porting.
| Part Number |
Brand |
Price |
|
| P8952031 |
Professional Products |
$185.10 |
|
|
|
|
|
1987 Chevrolet V20 Professional Products - Professional Products Hurricane Intake Manifold
PROFESSIONAL PRODUCTS HURRICANE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 3000 to 7500 RPM power range; Consistently outperformed all of the well known brands which are also much more expensive; Numerous dyno tests have proven over and over that there is no better manifold of this type for achieving maximum power and torque while actually using less fuel doing it.
| Part Number |
Brand |
Price |
|
| P8952030 |
Professional Products |
$250.85 |
|
|
