|
|
1996-2004 Chevrolet S10 Dorman Intake Manifold
DORMAN INTAKE MANIFOLD KIT, PLASTIC -- 50-state legal; Includes plastic vacuum manifold, gaskets, and O-rings; Features reinforced aluminum coolant crossover that means there will be no repeat failure due to corrosion and vibration, integrated silicone gasket that means no separate gasket to deal with and fewer leak paths at cylinder heads and throttle body, and reinforced coolant passages that means stronger protection against recurring leaks; It also has thicker intake walls and better fillet design to prevent warping of the manifold at the gasket mounting surfaces; Designed to eliminate the double sided throttle body gasket; Replaces OE number 17113542.
| Part Number |
Brand |
Price |
 |
| RB615182 |
Dorman |
$89.63 |
|
|
|
|
1996-2004 Chevrolet S10 Replacement Intake Manifold Gasket
INTAKE MANIFOLD GASKETS, RUBBER, SET OF 2 -- Includes upper set; A high quality, OE replacement intake manifold gasket set; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
 |
| REPC312404 |
Replacement |
$28.35 |
|
|
|
|
1996-2004 Chevrolet S10 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKETS, SET OF 2 -- Includes upper set; A high quality, OE replacement intake manifold gasket set.
| Part Number |
Brand |
Price |
 |
| FPMS95817 |
Felpro |
$31.67 |
|
|
|
|
1996-2004 Chevrolet S10 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Includes valve cover gasket and upper set; A high quality, direct fit OE replacement intake manifold gasket set; With Felpro's limited 1-year warranty.
| Part Number |
Brand |
Price |
 |
| FPMS98002T |
Felpro |
$74.49 |
|
|
|
|
1998-2003 Chevrolet S10 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
 |
| FPMS90543 |
Felpro |
$11.57 |
|
|
|
|
1994-1997 Chevrolet S10 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
 |
| FPMS95393 |
Felpro |
$11.82 |
|
|
|
|
1993-1995 Chevrolet S10 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
 |
| FPMS933461 |
Felpro |
$16.86 |
|
|
|
|
1994-1995 Chevrolet S10 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Lower Set, Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
 |
| FPMS95832 |
Felpro |
$10.74 |
|
|
|
|
1993-1994 Chevrolet S10 Blazer Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
 |
| FPMS933461 |
Felpro |
$16.86 |
|
|
|
|
1992-1994 Chevrolet S10 Blazer Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Lower Set, Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
 |
| FPMS95832 |
Felpro |
$10.74 |
|
|
|
|
1991-1993 Chevrolet S10 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
 |
| FPMS94278 |
Felpro |
$14.27 |
|
|
|
|
1982-1993 Chevrolet S10 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
 |
| FPMS91022 |
Felpro |
$21.69 |
|
|
|
|
1988-1992 Chevrolet S10 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
 |
| FPMS93346 |
Felpro |
$16.60 |
|
|
|
|
1988-1992 Chevrolet S10 Blazer Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
 |
| FPMS93346 |
Felpro |
$16.60 |
|
|
|
|
1987-1991 Chevrolet S10 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
 |
| FPMS93688 |
Felpro |
$9.95 |
|
|
|
|
1983-1989 Chevrolet S10 Blazer Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
 |
| FPMS91022 |
Felpro |
$21.69 |
|
|
|
|
1987-1988 Chevrolet S10 Blazer Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
 |
| FPMS93688 |
Felpro |
$9.95 |
|
|
|
|
1985-1986 Chevrolet S10 Blazer Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
 |
| FPMS90563 |
Felpro |
$8.99 |
|
|
|
|
1985-1986 Chevrolet S10 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
 |
| FPMS90563 |
Felpro |
$8.99 |
|
|
|
|
1982-1985 Chevrolet S10 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
 |
| FPMS90394 |
Felpro |
$4.62 |
|
|
|
|
1983-1984 Chevrolet S10 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
 |
| FPMS91390 |
Felpro |
$6.52 |
|
|
|
|
1983-1984 Chevrolet S10 Blazer Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
 |
| FPMS90394 |
Felpro |
$4.62 |
|
|
|
|
1983-1984 Chevrolet S10 Blazer Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
 |
| FPMS91390 |
Felpro |
$6.52 |
|
|
|
|
1996-2004 Chevrolet S10 Edelbrock - Edelbrock Performer Intake Manifold
EDELBROCK PERFORMER SERIES MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 3.87 in. A x 5.28 in. B height; 2.05 in. port exit; Dual-plane type; Non-EGR; Designed for use with street rod, industrial, and engine swap market utilizing 262 to 400 c.i.d. Chevy V8s with 1996 and later Vortec (L31) cast iron or the Edelbrock E-Tec aluminum heads; Has provision for external water bypass and may be used on either Vortec blocks or 1995 and earlier blocks; No provision for exhaust heated chokes; Accepts square-bore and spread-bore carburetors, late model water neck, alternator, HEI, and air conditioning brackets; Will not fit under stock Corvette hood; Recommended to use Edelbrock intake gasket part number 7235.
| Part Number |
Brand |
Price |
 |
| E112116 |
Edelbrock |
$196.67 |
|
|
|
|
1996-2004 Chevrolet S10 Edelbrock - Edelbrock Performer Intake Manifold
EDELBROCK PERFORMER VORTEC MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from idle to 5500 rpm; 3.87 in. A x 5.28 in. B height; 2.05 in. port exit; Dual-plane manifold; Non-EGR; Designed for use with street rod, industrial, and engine swap market utilizing 262-400 c.i.d. Chevy V8s with 1996 and later Vortec cast iron or the Edelbrock E-Tec aluminum heads; Provisions for external water bypass and may be used on either Vortec blocks or 1995 and earlier blocks; No provision for exhaust heated chokes; Accepts both square-bore and spread-bore carbs and late model water neck, alternator, HEI and air conditioning brackets; Will not fit under stock Corvette hood.
| Part Number |
Brand |
Price |
 |
| E1121164 |
Edelbrock |
$273.11 |
|
|
|
|
1994-2004 Chevrolet S10 Edelbrock - Edelbrock Super Victor Intake Manifold
EDELBROCK SUPER VICTOR MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 50-state legal; Features 3.2 square in. large runner cross-sectional area and highly efficient cloverleaf plenum design; Designed for raised port heads; Recommended to use Edelbrock intake gasket part number 7235 or GM intake gasket part number 89017465.
| Part Number |
Brand |
Price |
 |
| E112913 |
Edelbrock |
$278.17 |
|
|
|
|
1988-1994 Chevrolet S10 Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 4.3L T.B.I.. V6, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, EGR, Idle-5500 RPM, Free Computer Chip Provided, Cast Finish, Not For Vehicles With Flash Memory Computer, Use GM Intake Gasket Part number 101594
| Part Number |
Brand |
Price |
 |
| E113713 |
Edelbrock |
$402.55 |
|
|
|
|
1992-1994 Chevrolet S10 Blazer Edelbrock - Edelbrock Super Victor Intake Manifold
EDELBROCK SUPER VICTOR MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 50-state legal; Features 3.2 square in. large runner cross-sectional area and highly efficient cloverleaf plenum design; Designed for raised port heads; Recommended to use Edelbrock intake gasket part number 7235 or GM intake gasket part number 89017465.
| Part Number |
Brand |
Price |
 |
| E112913 |
Edelbrock |
$278.17 |
|
|
|
|
1988-1994 Chevrolet S10 Blazer Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 4.3L T.B.I.. V6, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, EGR, Idle-5500 RPM, Free Computer Chip Provided, Cast Finish, Not For Vehicles With Flash Memory Computer, Use GM Intake Gasket Part number 101594
| Part Number |
Brand |
Price |
 |
| E113713 |
Edelbrock |
$402.55 |
|
|
|
|
1996-2004 Chevrolet S10 AC Delco Intake Manifold Gasket
AC DELCO INTAKE MANIFOLD GASKET KIT -- A high quality, OE replacement intake manifold gasket kit.
| Part Number |
Brand |
Price |
 |
| AC89017866 |
AC Delco |
$45.22 |
|
|
|
|
1996-2001 Chevrolet S10 OES Genuine Intake Manifold Gasket
| Part Number |
Brand |
Price |
 |
| W0133-1828843 |
OES Genuine |
$42.95 |
|
|
|
|
1996-2003 Chevrolet S10 Delphi Intake Manifold
Delphi Delphi is an Original Equipment supplier to over 25 vehicle manufacturers and is the largest and most diversified supplier of automotive parts to the global aftermarket.
| Part Number |
Brand |
Price |
 |
| W0133-1687771 |
Delphi |
$64.95 |
|
|
|
|
1996-2004 Chevrolet S10 Delphi Intake Manifold
DELPHI INTAKE MANIFOLD -- 50-state legal; A high quality, direct fit OE replacement intake manifold.
| Part Number |
Brand |
Price |
 |
| DELFH10114 |
Delphi |
$62.28 |
|
|
|
|
1996-2001 Chevrolet S10 Delphi Intake Manifold
DELPHI INTAKE MANIFOLD -- 50-state legal; A high quality, direct fit OE replacement intake manifold.
| Part Number |
Brand |
Price |
 |
| DELFH10110 |
Delphi |
$216.94 |
|
|
|
|
1988-1995 Chevrolet S10 Spectre Intake Manifold Bolt Set
SPECTRE INTAKE BOLT AND WASHER SET, 12 PIECES -- 3/8"-16 x 1", Made Of Grade 5 Steel And Zinc Hex Head, With Manufacturer's Limited Warranty
| Part Number |
Brand |
Price |
 |
| S714652 |
Spectre |
$2.78 |
|
|
|
|
1988-1994 Chevrolet S10 Blazer Spectre Intake Manifold Bolt Set
SPECTRE INTAKE BOLT AND WASHER SET, 12 PIECES -- 3/8"-16 x 1", Made Of Grade 5 Steel And Zinc Hex Head, With Manufacturer's Limited Warranty
| Part Number |
Brand |
Price |
 |
| S714652 |
Spectre |
$2.78 |
|
|
|
|
1983-1985 Chevrolet S10 Felpro Intake & Exhaust Manifold Gasket
FELPRO INTAKE AND EXHAUST MANIFOLD GASKET -- A high quality, direct fit OE replacement intake and exhaust manifold gasket.
| Part Number |
Brand |
Price |
 |
| FPMS93344 |
Felpro |
$15.24 |
|
|
|
|
1984 Chevrolet S10 Blazer Felpro Intake & Exhaust Manifold Gasket
FELPRO INTAKE AND EXHAUST MANIFOLD GASKET -- A high quality, direct fit OE replacement intake and exhaust manifold gasket.
| Part Number |
Brand |
Price |
 |
| FPMS93344 |
Felpro |
$15.24 |
|
|
|
|
1996-2004 Chevrolet S10 Dorman Intake Manifold Gasket
DORMAN REPLACEMENT GASKET KIT -- A high quality, direct fit OE replacement gasket kit; With Dorman's limited warranty.
| Part Number |
Brand |
Price |
 |
| RB615182G |
Dorman |
$17.16 |
|
|
|
|
1996-2004 Chevrolet S10 Victor Intake Manifold Gasket
VICTOR INTAKE MANIFOLD GASKET KIT, VICTO-TECH -- A high quality, OE replacement intake manifold gasket kit; Replaces OE numbers 89017866, 12529196, and 89017460.
| Part Number |
Brand |
Price |
 |
| VICMS16168P |
Victor |
$40.66 |
|
|
|
|
1996-2004 Chevrolet S10 Victor Intake Manifold Gasket
VICTOR INTAKE MANIFOLD GASKET KIT, VICTO-TECH -- A high quality, OE replacement intake manifold gasket kit; Replaces OE numbers 89017866, 12529196, and 89017460.
| Part Number |
Brand |
Price |
 |
| VICMS16168 |
Victor |
$21.09 |
|
|
|
|
1996-2004 Chevrolet S10 Victor Intake Manifold Gasket
VICTOR INTAKE MANIFOLD GASKET KIT, VICTO-TECH -- A high quality, OE replacement intake manifold gasket kit; Replaces OE numbers 12529196, 89017460 and 89017866.
| Part Number |
Brand |
Price |
 |
| VICMIS16168 |
Victor |
$75.15 |
|
|
|
|
1998-2003 Chevrolet S10 Victor Intake Manifold Gasket
VICTOR INTAKE MANIFOLD GASKET, VICTO-TECH, SOLD INDIVIDUALLY -- A high quality, OE replacement intake manifold gasket; Replaces OE numbers 12564499 and 24575614.
| Part Number |
Brand |
Price |
 |
| VICMS16507 |
Victor |
$8.90 |
|
|
|
|
1994-1997 Chevrolet S10 Victor Intake Manifold Gasket
VICTOR INTAKE MANIFOLD GASKETS, SET OF 2 -- A high quality, OE replacement intake manifold gasket set; Replaces OE numbers 10103647, 10112334, and 24574409.
| Part Number |
Brand |
Price |
 |
| VICMS15687 |
Victor |
$11.77 |
|
|
|
|
1993-1995 Chevrolet S10 Victor Intake Manifold Gasket
VICTOR INTAKE MANIFOLD GASKET KIT -- A high quality, OE replacement intake manifold gasket kit; Replaces OE number 12518285.
| Part Number |
Brand |
Price |
 |
| VICMS15622 |
Victor |
$11.80 |
|
|
|
|
1994-1995 Chevrolet S10 Victor Intake Manifold Gasket
VICTOR INTAKE MANIFOLD GASKET KIT -- A high quality, OE replacement intake manifold gasket kit; Replaces OE number 12510908.
| Part Number |
Brand |
Price |
 |
| VICMS15497 |
Victor |
$12.40 |
|
|
|
|
1993-1994 Chevrolet S10 Blazer Victor Intake Manifold Gasket
VICTOR INTAKE MANIFOLD GASKET KIT -- A high quality, OE replacement intake manifold gasket kit; Replaces OE number 12518285.
| Part Number |
Brand |
Price |
 |
| VICMS15622 |
Victor |
$11.80 |
|
|
|
|
1992-1994 Chevrolet S10 Blazer Victor Intake Manifold Gasket
VICTOR INTAKE MANIFOLD GASKET KIT -- A high quality, OE replacement intake manifold gasket kit; Replaces OE number 12510908.
| Part Number |
Brand |
Price |
 |
| VICMS15497 |
Victor |
$12.40 |
|
|
|
|
1991-1993 Chevrolet S10 Victor Intake Manifold Gasket
VICTOR INTAKE MANIFOLD GASKET, SOLD INDIVIDUALLY -- A high quality, OE replacement intake manifold gasket; Replaces OE number 10066662.
| Part Number |
Brand |
Price |
 |
| VICMS15668 |
Victor |
$11.45 |
|
|
|
|
1990-1993 Chevrolet S10 Victor Intake Manifold Gasket
VICTOR INTAKE MANIFOLD GASKET KIT -- A high quality, OE replacement intake manifold gasket kit; Replaces OE numbers 12520756, 10048963, 10147928, and 14033476.
| Part Number |
Brand |
Price |
 |
| VICMS15307 |
Victor |
$15.81 |
|
|