|
|
1987-1988 Chevrolet R30 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
 |
| FPMS903142 |
Felpro |
$10.67 |
|
|
|
|
|
1987-1988 Chevrolet R30 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS93317 |
Felpro |
$14.08 |
|
|
|
|
|
1987-1988 Chevrolet R30 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90240 |
Felpro |
$14.77 |
|
|
|
|
|
1987-1988 Chevrolet R30 Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS91586 |
Felpro |
$18.01 |
|
|
|
|
|
1987-1988 Chevrolet R30 Edelbrock Intake Manifold
EDELBROCK PERFORMER SERIES MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 50-state legal; Delivers outstanding performance for the street with complete emissions compatibility; Add our Performer High-Compression heads part number 60499 for even greater power gains; Stock replacement/street legal part for 1987-90 Chevy/GMC trucks with Mark IV 454 c.i.d. throttle body injected V8 engines; Accepts stock EGR in stock location.
| Part Number |
Brand |
Price |
|
| E113764 |
Edelbrock |
$397.54 |
|
|
|
|
|
1987-1988 Chevrolet R30 Edelbrock - Edelbrock Torker II Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Torker II 302, Intake Manifold, Non-EGR, 2500-6500 RPM, Cast Finish, Recommend FelPro Gasket Part number 1250 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E115021 |
Edelbrock |
$247.31 |
|
|
|
|
|
1987-1988 Chevrolet R30 Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air-Gap 2-R, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For High-Performance Rectangular Port Cylinder Heads Only, Cast Finish, Will Not Fit Under Stock Hood, Recommend FelPro Gasket Part Number 1211 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117562 |
Edelbrock |
$306.15 |
|
|
|
|
|
1987-1988 Chevrolet R30 Edelbrock - Edelbrock Victor JR. Intake Manifold
EDELBROCK VICTOR JR. SERIES INTAKE MANIFOLD, ALUMINIZED STEEL, NATURAL FINISH -- For off-road use only - Not legal for use on public roads and highways; Features low-profile that works well with minimal hood clearance and where up to 2 in. spacers can be used for performance tuning; Provides maximum performance for engine with standard port location, iron, and aluminum cylinder heads.
| Part Number |
Brand |
Price |
|
| E112975 |
Edelbrock |
$255.10 |
|
|
|
|
|
1987-1988 Chevrolet R30 Edelbrock Intake Manifold
EDELBROCK PERFORMER SERIES MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 50-state legal; Designed for 1987-95 305-350 c.i.d. chevy throttle body injected engines; A stock replacement part for 305-350 V8s with factory T.B.I.; Accepts all OEM equipment and small-bore 1.69 in. throttle body injectors only; No chip changes or computer mods required unless entire 5.7L power package is used; Computer chip is supplied free of charge with proof of purchase of manifold, cam and heads; Will not fit caprice, buick or cadillac B bodies.
| Part Number |
Brand |
Price |
|
| E113704 |
Edelbrock |
$367.26 |
|
|
|
|
|
1987-1988 Chevrolet R30 Edelbrock - Edelbrock Performer Intake Manifold
EDELBROCK PERFORMER SERIES INTAKE MANIFOLD, ALUMINUM, CAST FINISH -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from idle to 5500 RPM; Dual plane; Square bore; With runner tuning; Designed to increase your vehicle's horsepower and torque over a wide RPM range; Non-EGR; With Edelbrock's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| E112104 |
Edelbrock |
$212.83 |
|
|
|
|
|
1987-1988 Chevrolet R30 Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, EGR, Idle-5500 RPM, Cast Finish, Use OE Gasket Part number GM10159409 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E113706 |
Edelbrock |
$257.33 |
|
|
|
|
|
1987-1988 Chevrolet R30 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- 0.375 in. -16 x 1 in. socket head; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds.
| Part Number |
Brand |
Price |
|
| G12956G |
Mr Gasket |
$6.04 |
|
|
|
|
1987-1988 Chevrolet R30 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .375-16 x 1 Hex Head Bolts And Twelve .375" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125002 |
Mr Gasket |
$23.50 |
|
|
|
|
|
1987-1988 Chevrolet R30 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Includes twelve 0.375 in. -16 x 1 in. hex head bolts and washers; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G12955G |
Mr Gasket |
$6.72 |
|
|
|
|
|
1987-1988 Chevrolet R30 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Includes Sixteen .375-16 x 1.25 Hex Head Bolts And Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G12954G |
Mr Gasket |
$9.58 |
|
|
|
|
|
1987-1988 Chevrolet R30 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Includes Sixteen .375-16 x 1.25 Socket Head Bolts And Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G12957G |
Mr Gasket |
$8.07 |
|
|
|
|
|
1987-1988 Chevrolet R30 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .375-16 x 1 Point Head Bolts And Twelve .375" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125003 |
Mr Gasket |
$34.84 |
|
|
|
|
|
1987-1988 Chevrolet R30 Mr Gasket Intake Manifold Bolt Set
MR GASKET SUPER INTAKE MANIFOLD BOLT KIT, BLACK OXIDE COATED -- 3/8"-16 X 1-1/16", Consists Of 12 Bolts And Washers, Made From Grade 5 Steel For Strength And Durability, Black Oxide Coated To Resist Corrosion And Provide A Clean Professional Appearance, Features A Wide Washer Face Hex Head To Spread Clamp Force Evenly For A Positive Seal, Comes With Extra Thick Flat Washers That Provide Uniform Clamp Load And Prevent Galling On Aluminum Intake Manifolds, With Mr. Gasket's Limited Warranty
| Part Number |
Brand |
Price |
|
| G126080 |
Mr Gasket |
$14.31 |
|
|
|
|
|
1987-1988 Chevrolet R30 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Features Twelve Point Smaller-Than-Standard Head And Flange, Includes Twelve .375- 16 x 1' Bolts And Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G126091 |
Mr Gasket |
$17.40 |
|
|
|
|
|
1987-1988 Chevrolet R30 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Sixteen .375-16 x 1.25 Hex Head Bolts And Sixteen .375 in. AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125004 |
Mr Gasket |
$30.49 |
|
|
|
|
|
1987-1988 Chevrolet R30 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Sixteen .375-16 x 1.25 Point Head Bolts And Sixteen .375" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125005 |
Mr Gasket |
$45.23 |
|
|
|
|
|
1987-1988 Chevrolet R30 Mr Gasket Intake Manifold Bolt Set
MR GASKET SUPER INTAKE MANIFOLD BOLT KIT, BLACK OXIDE -- Features Twelve Point Smaller-Than-Standard Head And Flange, Includes Twelve .375'-16 x 1.25' Bolts And Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G126081 |
Mr Gasket |
$21.76 |
|
|
|
|
|
1987-1988 Chevrolet R30 Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Features Twelve Point Smaller-Than-Standard Head And Flange, Includes Four .375- 16 x 1.75' Bolts And Twelve .375-16 x 1.25' Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G126093 |
Mr Gasket |
$27.86 |
|
|
|
|
|
1987-1988 Chevrolet R30 Holley Intake Manifold
EFI HIGH RISE DUAL PLANE INTAKE MANIFOLD -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Satin Finish, Power Band Idle to 6,000 RPM, EGR Compatible, Cast Iron Head
| Part Number |
Brand |
Price |
|
| H1930066 |
Holley |
$211.78 |
|
|
|
|
|
1987-1988 Chevrolet R30 Holley Intake Manifold
STRIP DOMINATOR INTAKE MANIFOLD -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Satin Finish, Power Band Idle To 6,000 RPM, High Rise And Dual Plane Design, Increases Power And Torque In The Low To Mid Range Of The Power Band, Perfect For Towing Use And Heavier Vehicles, Square Flange, 1987 And Later With Cast Iron Heads
| Part Number |
Brand |
Price |
|
| H1930064 |
Holley |
$191.50 |
|
|
|
|
|
1987-1988 Chevrolet R30 Professional Products - Professional Products Cyclone Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE INTAKE MANIFOLD, ALUMINUM -- 50-state legal; Idle to 5500 RPM power range; Casted from steel molds which provide a tighter grain casting; A great all-around street manifold for mild performance applications; 100 percent pressure tested for leaks to eliminate installation problems; Set up to accept a spread bore carburetor but comes with an adapter plane that permits the use of square bore carburetors; No EGR provisions.
| Part Number |
Brand |
Price |
|
| P8952001 |
Professional Products |
$146.47 |
|
|
|
|
|
1987-1988 Chevrolet R30 Professional Products - Professional Products Cyclone Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE INTAKE MANIFOLD, ALUMINUM -- 50-state legal; Idle to 5500 RPM power range; Casted from steel molds which provide a tighter grain casting; A great all-around street manifold for mild performance applications; Set up to accept a spread bore carburetor but comes with an adapter plane that permits the use of square bore carburetors; 100 percent pressure tested for leaks to eliminate installation problems; Features four corner water outlets and dual distributor hold-downs; With EGR provisions; Will work with a late model style water neck, alternator, HEI ignition system and air conditioning brackets.
| Part Number |
Brand |
Price |
|
| P8952009 |
Professional Products |
$163.20 |
|
|
|
|
|
1987-1988 Chevrolet R30 Professional Products - Professional Products Cyclone Plus Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE PLUS INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; Idle to 5500 RPM power range; 0.38 in. taller and has larger ports and runners than the standard cyclone intake manifold; Produces more power and torque; Features a built-in rear water crossover passage for better water flow and cooler engine operating temperatures, nitrous bosses and rear water ports; Uses a square bore carb flange which permits direct bolt-on of all popular holley carburetors.
| Part Number |
Brand |
Price |
|
| P8952010 |
Professional Products |
$230.59 |
|
|
|
|
|
1987-1988 Chevrolet R30 Professional Products - Professional Products Typhoon Intake Manifold
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; 0.70 in. taller than cyclone intake manifold; A high performance 180-degree dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; will not work on engines with reverse water flow; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8952020 |
Professional Products |
$206.27 |
|
|
|
|
|
1987-1988 Chevrolet R30 Professional Products - Professional Products Typhoon Intake Manifold
PROFESSIONAL PRODUCTS TYPHOON INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; 0.70 in. taller than cyclone intake manifold; A high performance 180-degree dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; will not work on engines with reverse water flow; Not for exhaust heated or stock style chokes.
| Part Number |
Brand |
Price |
|
| P8952022 |
Professional Products |
$269.00 |
|
|
|
|
|
1987-1988 Chevrolet R30 Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; Not for exhaust heated or stock style chokes; Will not work on engines with reverse water flow.
| Part Number |
Brand |
Price |
|
| P8952025 |
Professional Products |
$255.99 |
|
|
|
|
|
1987-1988 Chevrolet R30 Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; Not for exhaust heated or stock style chokes; Will not work on engines with reverse water flow.
| Part Number |
Brand |
Price |
|
| P8952026 |
Professional Products |
$193.21 |
|
|
|
|
|
1987-1988 Chevrolet R30 Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; Not for exhaust heated or stock style chokes; Will not work on engines with reverse water flow.
| Part Number |
Brand |
Price |
|
| P8952027 |
Professional Products |
$263.63 |
|
|
|
|
|
1987-1988 Chevrolet R30 Professional Products - Professional Products Crosswind Intake Manifold
PROFESSIONAL PRODUCTS CROSSWIND INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 1500 to 6500 RPM power range; A high performance 180-degree dual plane manifold; Features an open area under the plenum chamber that provides for a flow of cooling air which keeps the temperature of the air-fuel charge lower to produce more power and torque; 0.70 in. taller than cyclone intake manifold; Produces power comparable to some single plane manifolds yet retains the throttle response and drive ability typical of a dual plane manifold; Uses a square bore carburetor flange and is designed for 600-700 CFM vacuum secondary carb on street applications or 700-800 CFM double pumper carburetors on high performance applications; Features cast-in nitrous bosses with water outlets at all four corner plus dual distributor hold downs; Has a provision to add an oil fill tube; Not for exhaust heated or stock style chokes; Will not work on engines with reverse water flow.
| Part Number |
Brand |
Price |
|
| P8952028 |
Professional Products |
$200.85 |
|
|
|
|
|
1987-1988 Chevrolet R30 Professional Products - Professional Products Hurricane Intake Manifold
PROFESSIONAL PRODUCTS HURRICANE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 3000 to 7500 RPM power range; Consistently outperformed all of the well known brands which are also much more expensive; Numerous dyno tests have proven over and over that there is no better manifold of this type for achieving maximum power and torque while actually using less fuel doing it.
| Part Number |
Brand |
Price |
|
| P8952030 |
Professional Products |
$250.85 |
|
|
|
|
|
1987-1988 Chevrolet R30 Professional Products - Professional Products Hurricane Intake Manifold
PROFESSIONAL PRODUCTS HURRICANE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 3000 to 7500 RPM power range; A single plane 360-degree manifold design that provides optimum power in the mid to upper RPM ranges; Features a standard square bore carb flange, nitrous bosses, dual distributor hold-downs, four corner water ports and a special water flow divider; the ports are specifically positioned to provide an optimum starting point for custom porting.
| Part Number |
Brand |
Price |
|
| P8952031 |
Professional Products |
$185.10 |
|
|
|
|
|
1987-1988 Chevrolet R30 Professional Products - Professional Products Cyclone Intake Manifold
PROFESSIONAL PRODUCTS CYCLONE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; Idle to 5500 RPM power range; Casted from steel molds which provide a tighter grain casting; A great all-around street manifold for mild performance applications; Set up to accept a spread bore carburetor but comes with an adapter plane that permits the use of square bore carburetors; 100 percent pressure tested for leaks to eliminate installation problems; No EGR provisions; For standard heads application.
| Part Number |
Brand |
Price |
|
| P8952000 |
Professional Products |
$193.86 |
|
|
|
|
|
1987-1988 Chevrolet R30 Professional Products - Professional Products Super Hurricane Intake Manifold
PROFESSIONAL PRODUCTS SUPER HURRICANE INTAKE MANIFOLD, ALUMINUM -- For off road use - Not legal for use on public roads and highways; 3000 to 7500 RPM power range; Features a larger plenum and runners than hurricane or hurricane plus; Will outperform other leading intake manifolds from 5200 RPM to 7200 RPM and uses less fuel while making more power; Designed for use on very large small block engines using gas or alcohol or smaller engines running on alcohol.
| Part Number |
Brand |
Price |
|
| P8952036 |
Professional Products |
$286.93 |
|
|
|
|
|
1987-1988 Chevrolet R30 Spectre Intake Manifold Bolt Set
SPECTRE INTAKE BOLT AND WASHER SET, 12 PIECES -- 3/8"-16 x 1", Made Of Grade 5 Steel And Zinc Hex Head, With Manufacturer's Limited Warranty
| Part Number |
Brand |
Price |
|
| S714652 |
Spectre |
$2.78 |
|
|
|
|
1987-1988 Chevrolet R30 Edelbrock Intake Manifold Gasket
Intake Manifold Gasket, Rectangular Port, Designed To Match With Performer Series Manifolds And Heads, Offer A Perfect Fit For Better Flow, Sealing, Easier Installation And Removal
| Part Number |
Brand |
Price |
|
| E117202 |
Edelbrock |
$14.04 |
|
|
|
|
|
1987-1988 Chevrolet R30 Edelbrock Intake Manifold Gasket
EDELBROCK MANIFOLD GASKETS, SET OF 5 -- High quality manifold gaskets; Designed for runners part number 3865 and 3870.
| Part Number |
Brand |
Price |
|
| E113866 |
Edelbrock |
$31.74 |
|
|
|
|
1987-1988 Chevrolet R30 Edelbrock Intake Manifold Gasket
Intake Manifold Gasket, Oval Port, Designed To Match With Performer Series Manifolds And Heads, Offer A Perfect Fit For Better Flow, Sealing, Easier Installation And Removal
| Part Number |
Brand |
Price |
|
| E117203 |
Edelbrock |
$17.35 |
|
|
|
|
|
1987-1988 Chevrolet R30 Edelbrock Intake Manifold Gasket
EDELBROCK BASE TO TOP MANIFOLD GASKETS, SET OF 2 -- High quality manifold gaskets; Base to top gaskets for Edelbrock part number 7110.
| Part Number |
Brand |
Price |
|
| E116999 |
Edelbrock |
$5.82 |
|
|
|
|
|
1987-1988 Chevrolet R30 Felpro Intake & Exhaust Manifold Gasket
FELPRO INTAKE AND EXHAUST MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake and exhaust manifold gasket set.
| Part Number |
Brand |
Price |
|
| FPMS9786 |
Felpro |
$8.31 |
|
|
|
|
|
1987-1988 Chevrolet R30 Victor Intake Manifold Gasket
VICTOR INTAKE MANIFOLD GASKETS, SET OF 7 -- A high quality, OE replacement intake manifold gasket set; Replaces OE numbers 15633464, 14033952, and 14044976.
| Part Number |
Brand |
Price |
|
| VICMS15335 |
Victor |
$14.59 |
|
|
|
|
|
1987-1988 Chevrolet R30 Victor Intake Manifold Gasket
VICTOR INTAKE MANIFOLD GASKET KIT -- A high quality, OE replacement intake manifold gasket kit; Replaces OE numbers MSZ1776, Z1695, 14038088, 14019844, 14034821, 345195, 356801, 356802, 3733878, 3734115, 3931600, 3957985, 476007, and 6258833.
| Part Number |
Brand |
Price |
|
| VICMS15315 |
Victor |
$10.93 |
|
|
|
|
|
1987-1988 Chevrolet R30 Mr Gasket Intake Manifold Gasket
MR GASKET INTAKE MANIFOLD GASKET SET, 2 PIECES -- 1.31'' x 2.10'' Port Dimensions, .125 Thick, Made From High-Quality Cellulose/Nitrile Composition Gasket Material, Provides Excellent Sealing And Durability, Can Be Trimmed If Needed For Modified Ports, Ideal For OE Replacement, High Performance Street Use, Drag Racing, Or Oval Track Racing, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G12106 |
Mr Gasket |
$16.53 |
|
|
|
|
|
1987-1988 Chevrolet R30 Mr Gasket Intake Manifold Gasket
MR GASKET INTAKE MANIFOLD GASKET SET, 2 PIECES -- 1.75'' x 2.16'' Port Dimensions, .0625'' Thick, Made From High-Quality Cellulose/Nitrile Composition Gasket Material, Provides Excellent Sealing And Durability, Can Be Trimmed If Needed For Modified Ports, Ideal For OE Replacement, High Performance Street Use, Drag Racing, Or Oval Track Racing, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G12107 |
Mr Gasket |
$14.78 |
|
|
|
|
|
1987-1988 Chevrolet R30 Mr Gasket Intake Manifold Gasket
MR GASKET ULTRA-SEAL INTAKE MANIFOLD GASKET SET -- 1.31 in. x 2.19 in. port dimensions, 0.125 in. thick; Medium race port; Manufactured from cellulose/nitrile composition gasket material; Provides excellent sealing and durability; Features silicone beading on both sides of each gasket; Gasket sealer not required for installation; For OE replacement, high performance street, drag race, and oval track; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G125812 |
Mr Gasket |
$23.50 |
|
|
|
|
|
1987-1988 Chevrolet R30 Mr Gasket Intake Manifold Gasket
MR GASKET INTAKE MANIFOLD GASKET SET, 2 PIECES -- 1.75'' x 2.50'' Port Dimensions, .0625'' Thick, Made From High-Quality Cellulose/Nitrile Composition Gasket Material, Provides Excellent Sealing And Durability, Can Be Trimmed If Needed For Modified Ports, Ideal For OE Replacement, High Performance Street Use, Drag Racing, Or Oval Track Racing, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G12108 |
Mr Gasket |
$14.78 |
|
|
