|
|
|
|
Intake Manifold Chevrolet K20 Pickup |
|
|
1969-1974 Chevrolet K20 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
 |
| FPMS903142 |
Felpro |
$10.67 |
|
|
|
|
|
1974 Chevrolet K20 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS903143 |
Felpro |
$13.51 |
|
|
|
|
|
1966-1974 Chevrolet K20 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90323 |
Felpro |
$23.27 |
|
|
|
|
|
1969-1974 Chevrolet K20 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90322 |
Felpro |
$15.52 |
|
|
|
|
|
1968-1974 Chevrolet K20 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS902402 |
Felpro |
$14.30 |
|
|
|
|
|
1973-1974 Chevrolet K20 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS90240 |
Felpro |
$14.77 |
|
|
|
|
|
1970-1972 Chevrolet K20 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set; Use with installation aid red3, blu4, and yel5.
| Part Number |
Brand |
Price |
|
| FPMS902402 |
Felpro |
$14.30 |
|
|
|
|
|
1960-1968 Chevrolet K20 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets
| Part Number |
Brand |
Price |
|
| FPMS9617 |
Felpro |
$14.56 |
|
|
|
|
|
1966-1967 Chevrolet K20 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set.
| Part Number |
Brand |
Price |
|
| FPMS902403 |
Felpro |
$14.94 |
|
|
|
|
|
1960-1965 Chevrolet K20 Pickup Felpro Intake Manifold Gasket
FELPRO INTAKE MANIFOLD GASKET SET -- A high quality, direct fit OE replacement intake manifold gasket set.
| Part Number |
Brand |
Price |
|
| FPMS9459B |
Felpro |
$21.00 |
|
|
|
|
|
1961-1974 Chevrolet K20 Pickup Edelbrock - Edelbrock Thunder Intake Manifold
EDELBROCK PERFORMER EPS INTAKE MANIFOLD -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Non-EGR, A Dual-Plane Manifold That Is Optimized To Deliver Superior Performance With Edelbrock Square-Bore Performer Series Or Thunder Series AVS Carburetors, Has A Runner Design That Is Tuned For Peak Torque Around 3500 RPM On A 350-Inch Engine And It Is Ideal For Power From Off-Idle To 5500 RPM, Dyno Tested To Increase Power By Up To 5 Hp And 9 lb.-ft. of Torque Over The Edelbrock Performer Manifold 2101, Can Be Matched With A Dependable Edelbrock Square-Bore Carburetor For Maximum Performance Gains
| Part Number |
Brand |
Price |
|
| E112701 |
Edelbrock |
$173.59 |
|
|
|
|
|
1961-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, EGR, Idle-5500 RPM, Cast Finish, Recommended Gaskets FelPro Gasket Part number 1256 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E113701 |
Edelbrock |
$194.67 |
|
|
|
|
|
1968-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air-Gap 2-R, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For High-Performance Rectangular Port Cylinder Heads Only, Cast Finish, Will Not Fit Under Stock Hood, Recommend FelPro Gasket Part Number 1211 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117562 |
Edelbrock |
$306.15 |
|
|
|
|
|
1961-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For OEM 4 Barrel Or Edelbrock Carb, Polished Finish, Recommend FelPro Gasket Part number 1256 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121011 |
Edelbrock |
$313.77 |
|
|
|
|
|
1968-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
EDELBROCK RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 50-state legal; Designed for street 396-502 c.i.d. Chevy V8s with large oval-port cylinder heads, 1975 and earlier; Incorporates the same race-winning technology that been used on our Victor Series competition intakes for years; Features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power; Includes rear water outlets, two distributor clamp locations and nitrous bosses; Accepts all late model alternator and A/C brackets for the street; For square bore carburetors only; No provision for exhaust heated chokes and no exhaust crossover; Will not fit under stock hood of Corvette, 1965-67 Chevelle or 1967-81 Camaro.
| Part Number |
Brand |
Price |
|
| E117520 |
Edelbrock |
$434.84 |
|
|
|
|
|
1968-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 2-0, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, Non-EGR, Idle-5500 RPM, 4 Barrel Carb Manifold, Polished Finish, Recommended Gaskets FelPro Gasket Part number 1212 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121611 |
Edelbrock |
$405.33 |
|
|
|
|
|
1960-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Air-Gap Series, Intake Manifold, Cooler Air Charge For More Horsepower, Increased Torque And Horsepower At RPM Ranges You Use Daily, Non-EGR, Idle-5500 RPM, Cast Finish, Recommended Gaskets Fel
| Part Number |
Brand |
Price |
|
| E112601 |
Edelbrock |
$256.91 |
|
|
|
|
|
1960-1974 Chevrolet K20 Pickup Edelbrock - Edelbrock Pro-flo XT Intake Manifold
EDELBROCK PRO-FLO XT MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 1500 to 6500 rpm; Features large plenum and long tapered runners to deliver maximum horsepower and broad torque band throughout the rpm range; For use with front mount 90 mm throttle body for maximum performance.
| Part Number |
Brand |
Price |
|
| E1171373 |
Edelbrock |
$439.45 |
|
|
|
|
|
1960-1974 Chevrolet K20 Pickup Edelbrock - Edelbrock Torker II Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Torker II 302, Intake Manifold, Non-EGR, 2500-6500 RPM, Cast Finish, Recommend FelPro Gasket Part number 1250 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E115021 |
Edelbrock |
$247.31 |
|
|
|
|
|
1968-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
EDELBROCK RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 50-state legal; Designed for street 396-502 c.i.d. Chevy V8s with large oval-port cylinder heads, 1975 and earlier; Incorporates the same race-winning technology that been used on our Victor Series competition intakes for years; Features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power; Includes rear water outlets, two distributor clamp locations and nitrous bosses; Accepts all late model alternator and A/C brackets for the street; For square bore carburetors only; No provision for exhaust heated chokes and no exhaust crossover; Will not fit under stock hood of Corvette, 1965-67 Chevelle or 1967-81 Camaro.
| Part Number |
Brand |
Price |
|
| E117522 |
Edelbrock |
$460.24 |
|
|
|
|
|
1960-1974 Chevrolet K20 Pickup Edelbrock - Edelbrock Victor JR. Intake Manifold
EDELBROCK VICTOR JR. SERIES INTAKE MANIFOLD, ALUMINIZED STEEL, NATURAL FINISH -- For off-road use only - Not legal for use on public roads and highways; Features low-profile that works well with minimal hood clearance and where up to 2 in. spacers can be used for performance tuning; Provides maximum performance for engine with standard port location, iron, and aluminum cylinder heads.
| Part Number |
Brand |
Price |
|
| E112975 |
Edelbrock |
$255.10 |
|
|
|
|
|
1961-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For Square-Bore Carbs, Endurashine Chrome, Recommend FelPro Gasket Part Number 1205 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1175014 |
Edelbrock |
$382.40 |
|
|
|
|
|
1961-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer EPS, Intake Manifold, Produces Peak Torque Increases At 3500 RPM, Power Where You Can Use It Daily, Non-EGR, Idle-5500 RPM, Polished Finish, Recommended Gaskets FelPro Gasket Part number 1256 for
| Part Number |
Brand |
Price |
|
| E1127011 |
Edelbrock |
$283.94 |
|
|
|
|
|
1961-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For Square-Bore Carbs, Cast Finish, Recommend FelPro Gasket Part Number 1205 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117501 |
Edelbrock |
$264.52 |
|
|
|
|
|
1961-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
EDELBROCK RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 1500 to 6500 rpm; 5.05 in. x 5.64 in. height; 5.35 in. carburetor pad height; 0.98 x 2.72 in. port exit; Non-EGR; Includes timing control module; Delivers outstanding performance and broad torque band throughout its rpm range; Designed for LS1 engines.
| Part Number |
Brand |
Price |
|
| E117525 |
Edelbrock |
$371.08 |
|
|
|
|
|
1961-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; C357-B Three-Deuce, Intake Manifold, Includes Front Oil Filler Boss, Exhaust Heat Riser, Carb Center To Carb Center 5.5, Non-EGR, Idle-5500 RPM, Use Edelbrock Camshaft Kit Part number 213 For Low-Torque Needs, Part number 52 For Top-End Power, Recommend Edelbrock Intake Gasket Kit Part number 721 Or Fel-Pro Part number 1256
| Part Number |
Brand |
Price |
|
| E115419 |
Edelbrock |
$329.45 |
|
|
|
|
|
1968-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
EDELBROCK STREET TUNNEL RAM 2-0 MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; 3500 to 7500 rpm; Designed for use on 396 to 502 c.i.d. big block Chevy V8 with large oval port heads; Ideal for applications such as pro street or marine where low-end torque is not a prime factor; Use with Performer RPM cam/kit part number 7162 for maximum top-end power.
| Part Number |
Brand |
Price |
|
| E117115 |
Edelbrock |
$464.60 |
|
|
|
|
|
1968-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
EDELBROCK RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 50-state legal; Designed for street 396-502 c.i.d. Chevy V8s with large oval-port cylinder heads, 1975 and earlier; Incorporates the same race-winning technology that been used on our Victor Series competition intakes for years; Features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power; Includes rear water outlets, two distributor clamp locations and nitrous bosses; Accepts all late model alternator and A/C brackets for the street; For square bore carburetors only; No provision for exhaust heated chokes and no exhaust crossover; Will not fit under stock hood of Corvette, 1965-67 Chevelle or 1967-81 Camaro.
| Part Number |
Brand |
Price |
|
| E1175224 |
Edelbrock |
$552.40 |
|
|
|
|
|
1968-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air-Gap 2-0, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, Cast Finish, Will Not Fit Under Stock Hood, Recommend FelPro Gasket Part Number 1212 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117561 |
Edelbrock |
$291.57 |
|
|
|
|
|
1961-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, EGR, Idle-5500 RPM, Cast Finish, Use OE Gasket Part number GM10159409 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E113706 |
Edelbrock |
$257.33 |
|
|
|
|
|
1968-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
EDELBROCK RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Designed for street 396-502 c.i.d. Chevy V8s with large oval-port cylinder heads, 1975 and earlier; Incorporates the same race-winning technology that been used on our Victor Series competition intakes for years; Features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power; Includes rear water outlets, two distributor clamp locations and nitrous bosses; Accepts all late model alternator and A/C brackets for the street; For square bore carburetors only; No provision for exhaust heated chokes and no exhaust crossover; Will not fit under stock hood of Corvette, 1965-67 Chevelle or 1967-81 Camaro.
| Part Number |
Brand |
Price |
|
| E1175613 |
Edelbrock |
$426.06 |
|
|
|
|
|
1961-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air Gap, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, For Square-Bore Carbs, Polished Finish, Recommend FelPro Gasket Part Number 1205 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1175011 |
Edelbrock |
$413.45 |
|
|
|
|
|
1961-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer Series, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, Non-EGR, Idle-5500 RPM, For OEM 4 Barrel Or Edelbrock Carb, Cast Finish, Recommend FelPro Gasket Part number 1256 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E112101 |
Edelbrock |
$157.86 |
|
|
|
|
|
1961-1974 Chevrolet K20 Pickup Edelbrock - Edelbrock Performer EPS Intake Manifold
EDELBROCK PERFORMER EPS MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Provides up to 5 h.p. and 9 lb.-ft. of torque; Optimized for maximum power from idle to 5500 rpm; 3.74 in. A x 4.80 in. B height; 1.15 x 1.87 in. port exit; Includes oil fill tube and matching push-in breather cap; Dual-plane manifold; Non-EGR; Optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors.
| Part Number |
Brand |
Price |
|
| E1127034 |
Edelbrock |
$258.61 |
|
|
|
|
|
1962-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Street Tunnel Ram, Dual Quad, Intake Manifold, Designed For Maximum Top End Power, EGR, 3500-7500rpm, Cast Finish, Use Edelbrock Camshaft Kit Part Number 5002 For Low-Torque Needs, Part Number 7102 For Top-End Power, Recommend FelPro Gasket Part Number 1205 For Manifold Gasket
| Part Number |
Brand |
Price |
|
| E117110 |
Edelbrock |
$428.04 |
|
|
|
|
|
1968-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 2-0, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, Non-EGR, Idle-5500 RPM, 4 Barrel Carb Manifold, Endurashine, Recommended Gaskets FelPro Gasket Part number 1212 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1121614 |
Edelbrock |
$371.19 |
|
|
|
|
|
1961-1974 Chevrolet K20 Pickup Edelbrock - Edelbrock Performer EPS Intake Manifold
EDELBROCK PERFORMER EPS MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Provides up to 5 h.p. and 5 lb.-ft. of torque at up to 4500 rpm; 3.74 in. A x 4.80 in. B height; 1.15 x 1.87 in. port exit; Includes oil fill tube and matching push-in breather cap; Dual-plane manifold; Non-EGR; Optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder AVS series carburetors; Features modern runner design for those who want the vintage look of Edelbrock classic valve covers with no breathers; Recommended to use Edelbrock intake gasket part number 7201.
| Part Number |
Brand |
Price |
|
| E112703 |
Edelbrock |
$182.16 |
|
|
|
|
|
1961-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer EPS, Intake Manifold, Produces Peak Torque Increases At 3500 RPM, Power Where You Can Use It Daily, Non-EGR, Idle-5500 RPM, Endurashine, Recommended Gaskets FelPro Gasket Part number 1256
| Part Number |
Brand |
Price |
|
| E1127014 |
Edelbrock |
$226.02 |
|
|
|
|
|
1961-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
EDELBROCK RPM AIR-GAP DUAL QUAD MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Designed for street 396-502 c.i.d. Chevy V8s with large oval-port cylinder heads, 1975 and earlier; Incorporates the same race-winning technology that been used on our Victor Series competition intakes for years; Features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power; Includes rear water outlets, two distributor clamp locations and nitrous bosses; Accepts all late model alternator and A/C brackets for the street; For square bore carburetors only; No provision for exhaust heated chokes and no exhaust crossover; Will not fit under stock hood of Corvette, 1965-67 Chevelle or 1967-81 Camaro.
| Part Number |
Brand |
Price |
|
| E1154251 |
Edelbrock |
$575.37 |
|
|
|
|
|
1968-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; RPM Air-Gap 2-0, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, Endurashine Chrome, Will Not Fit Under Stock Hood, Recommend FelPro Gasket Part Number 1212 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E1175614 |
Edelbrock |
$409.61 |
|
|
|
|
|
1968-1974 Chevrolet K20 Pickup Edelbrock Intake Manifold
49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Performer 2-0, Intake Manifold, Increased Torque And Horsepower At RPM Ranges You Use Daily, Non-EGR, Idle-5500 RPM, 4 Barrel Carb Manifold, Cast Finish, Recommended Gaskets FelPro Gasket Part number 1212 for Manifold Gasket
| Part Number |
Brand |
Price |
|
| E112161 |
Edelbrock |
$238.52 |
|
|
|
|
|
1968-1969 Chevrolet K20 Pickup Edelbrock - Edelbrock Victor 454-r Intake Manifold
EDELBROCK VICTOR 454-R MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 8000 rpm; 5.9 in. height; Offers superior performance for drag racing and marine; Fits rectangular port heads; Accepts 4500 series carburetor or standard flange double pumpers with Edelbrock adapter part number 8716; To provide maximum horsepower with 4500 series carburetor, use 1 in. spacer part number 8717; Fits to Edelbrock Victor race heads part number 77609; Recommended to use Fel-Pro intake gasket part number 1275.
| Part Number |
Brand |
Price |
|
| E112907 |
Edelbrock |
$310.44 |
|
|
|
|
|
1968-1969 Chevrolet K20 Pickup Edelbrock - Edelbrock Performer RPM Intake Manifold
EDELBROCK PERFORMER RPM 2-0 MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 1500 to 6500 rpm; 4.45 in. x 6 in. height; 1.6 x 1.94 in. port exit; Non-EGR; Delivers outstanding horsepower while maintaining good torque and driveability; Accepts late-model water neck, air-conditioning, alternator and HEI equipment; No provisions for exhaust heated chokes; Designed for street 396-502 c.i.d. Chevy V8s with large oval-port cylinder heads.
| Part Number |
Brand |
Price |
|
| E1171614 |
Edelbrock |
$345.46 |
|
|
|
|
|
1968-1969 Chevrolet K20 Pickup Edelbrock - Edelbrock Victor JR. Intake Manifold
EDELBROCK VICTOR JR. 454-R MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 7500 rpm; 5.9 in. height; Designed to optimize the flow characteristic of an 850 CFM standard flange carburetor; Features extended runner dividers, smaller plenum chambers, and unique runner design for better 60 foot times; Especially suited to 502 c.i.d. and smaller competition engines; Fits rectangular port heads; Fits to Edelbrock Victor race heads part number 77609 and Victor 24-degree part number 77409; Recommended to use Fel-Pro intake gasket part number 1275.
| Part Number |
Brand |
Price |
|
| E112902 |
Edelbrock |
$290.25 |
|
|
|
|
|
1968-1969 Chevrolet K20 Pickup Edelbrock - Edelbrock Super Victor Intake Manifold
EDELBROCK SUPER VICTOR BBC MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 8500 rpm; 6.2 in. height; Single-plane manifold; Designed for rectangular port cylinder heads; Ideal for any big-block drag race engine with high air flow requirements; Outperformed the competition out of the box with just a port match and minor blending of critical surfaces; Recommended to use Fel-Pro intake gasket part number 1275.
| Part Number |
Brand |
Price |
|
| E112927 |
Edelbrock |
$315.66 |
|
|
|
|
|
1968-1969 Chevrolet K20 Pickup Edelbrock - Edelbrock Victor JR. Intake Manifold
EDELBROCK VICTOR JR. 454-O MANIFOLD, ALUMINUM, SOLD INDIVIDUALLY -- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses; Optimized for maximum power from 3500 to 7500 rpm; 5.9 in. height; Designed to optimize the flow characteristic of an 850 CFM standard flange carburetor; Features extended runner dividers, smaller plenum chambers, and unique runner design for better 60 foot times; Especially suited to 502 c.i.d. and smaller competition engines; Fits large oval port heads; Recommended to use Edelbrock intake gasket part number 7203.
| Part Number |
Brand |
Price |
|
| E112904 |
Edelbrock |
$290.25 |
|
|
|
|
|
1961-1974 Chevrolet K20 Pickup Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- 0.375 in. -16 x 1 in. socket head; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds.
| Part Number |
Brand |
Price |
|
| G12956G |
Mr Gasket |
$6.04 |
|
|
|
|
|
1961-1974 Chevrolet K20 Pickup Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- Includes twelve 0.375 in. -16 x 1 in. hex head bolts and washers; Made from high grade 5 steel for strength and durability; Zinc plated to resist corrosion and provides a clean professional appearance; Hardened flat washers provide uniform torque and prevents galling on aluminum intake manifolds; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G12955G |
Mr Gasket |
$6.72 |
|
|
|
|
1961-1974 Chevrolet K20 Pickup Mr Gasket Intake Manifold Bolt Set
MR GASKET INTAKE MANIFOLD BOLT KIT, CHROME PLATED -- Includes Twelve .375-16 x 1 Hex Head Bolts And Twelve .375" AN Washers, With Manufacturer's Limited 90-Day Warranty
| Part Number |
Brand |
Price |
|
| G125002 |
Mr Gasket |
$23.50 |
|
|
|
|
|
1961-1974 Chevrolet K20 Pickup Mr Gasket Intake Manifold Bolt Set
MR GASKET SUPER INTAKE MANIFOLD BOLT KIT, BLACK OXIDE COATED -- 3/8"-16 X 1-1/16", Consists Of 12 Bolts And Washers, Made From Grade 5 Steel For Strength And Durability, Black Oxide Coated To Resist Corrosion And Provide A Clean Professional Appearance, Features A Wide Washer Face Hex Head To Spread Clamp Force Evenly For A Positive Seal, Comes With Extra Thick Flat Washers That Provide Uniform Clamp Load And Prevent Galling On Aluminum Intake Manifolds, With Mr. Gasket's Limited Warranty
| Part Number |
Brand |
Price |
|
| G126080 |
Mr Gasket |
$14.31 |
|
|
|
|
More Chevrolet K20 Pickup Air Intake Parts
|
|
|
|
