Replacement hoods are stamp die cut for a perfect fit for your vehicle; It went through 500 hours salt sprayed test to make sure it is corrosion resistant and Electro Deposit Primer coated for strong and durable protection.

Part Number	Brand	Price
3905	Replacement	$119.64

CAPA Certified Replacement hoods are zinc oxide coated and 1000 hours salt sprayed tested to make sure they are corrosion resistant. They are stamp die cut for a perfect fit for your vehicle and Electro Deposit Primered coated for strong and durable protection.

Part Number	Brand	Price
T130105Q	Replacement	$206.96

• Includes installation instructions
• Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
• Designed with a 2-piece design that allows hood to open without removing the cover and a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
• Provides protection against rock chips, bugs, road tar, and adverse weather conditions
• Adds a sporty look to your vehicle with its glove like, aerodynamic design
• Does not need to be removed when wet
• Molds to the contours of your vehicle's hood
• Accommodates for pop-up headlights, fog lights, air-intakes, and all factory design features
• Easy installation with no tools required
• All parts are pre-attached

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
L2655100901	Lebra	$58.41

• Includes installation instructions
• Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
• Designed with a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
• Provides protection against rock chips, bugs, road tar, and adverse weather conditions
• Adds a sporty look to your vehicle with its glove like, aerodynamic design
• Does not need to be removed when wet
• Molds to the contours of your vehicle's hood
• Easy installation with no tools required
• Just pop the hood, slip it on and tighten the straps
• All parts are pre-attached

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
L264592301	Lebra	$22.97

• Includes installation instructions
• Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
• Designed with a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
• Provides protection against rock chips, bugs, road tar, and adverse weather conditions
• Adds a sporty look to your vehicle with its glove like, aerodynamic design
• Does not need to be removed when wet
• Molds to the contours of your vehicle's hood
• Easy installation with no tools required
• Just pop the hood, slip it on and tighten the straps
• All parts are pre-attached

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
L264592301	Lebra	$22.97

• Includes installation instructions
• Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
• Designed with a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
• Provides protection against rock chips, bugs, road tar, and adverse weather conditions
• Adds a sporty look to your vehicle with its glove like, aerodynamic design
• Does not need to be removed when wet
• Molds to the contours of your vehicle's hood
• Easy installation with no tools required
• Just pop the hood, slip it on and tighten the straps
• All parts are pre-attached

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
L264592301	Lebra	$22.97

• Includes installation instructions
• Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
• Designed with a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
• Provides protection against rock chips, bugs, road tar, and adverse weather conditions
• Adds a sporty look to your vehicle with its glove like, aerodynamic design
• Does not need to be removed when wet
• Molds to the contours of your vehicle's hood
• Easy installation with no tools required
• Just pop the hood, slip it on and tighten the straps
• All parts are pre-attached

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
L264592301	Lebra	$22.97

• Includes installation instructions
• Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
• Designed with a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
• Provides protection against rock chips, bugs, road tar, and adverse weather conditions
• Adds a sporty look to your vehicle with its glove like, aerodynamic design
• Does not need to be removed when wet
• Molds to the contours of your vehicle's hood
• Easy installation with no tools required
• Just pop the hood, slip it on and tighten the straps
• All parts are pre-attached

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
L264592301	Lebra	$22.97

• Includes installation instructions
• Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
• Designed with a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
• Provides protection against rock chips, bugs, road tar, and adverse weather conditions
• Adds a sporty look to your vehicle with its glove like, aerodynamic design
• Does not need to be removed when wet
• Molds to the contours of your vehicle's hood
• Easy installation with no tools required
• Just pop the hood, slip it on and tighten the straps
• All parts are pre-attached

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
L264592301	Lebra	$22.97

• Includes installation instructions
• Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
• Designed with a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
• Provides protection against rock chips, bugs, road tar, and adverse weather conditions
• Adds a sporty look to your vehicle with its glove like, aerodynamic design
• Does not need to be removed when wet
• Molds to the contours of your vehicle's hood
• Easy installation with no tools required
• Just pop the hood, slip it on and tighten the straps
• All parts are pre-attached

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
L264592401	Lebra	$22.97

• Includes installation instructions
• Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
• Designed with a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
• Provides protection against rock chips, bugs, road tar, and adverse weather conditions
• Adds a sporty look to your vehicle with its glove like, aerodynamic design
• Does not need to be removed when wet
• Molds to the contours of your vehicle's hood
• Easy installation with no tools required
• Just pop the hood, slip it on and tighten the straps
• All parts are pre-attached

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
L264592401	Lebra	$22.97

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

Part Number	Brand	Price
C59MM43039	Covercraft	$93.66

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MM43144	Covercraft	$93.66

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MM43143	Covercraft	$93.66

• Made of heavy-gauge leather grain vinyl with soft, protective backing
• Designed with micro-perforated finish that allows the mask to breathe and permits moisture vapor to evaporate when the vehicle is driven in wet weather
• Has protective air intake screens that are sewn into the outside of the mask to avoid loosing pieces of material inside which can abrade the paint surface
• Its reinforced air foils prevent the mask from flapping and lifting
• A white non-woven fleece is also used in this protector for easier back-side cleaning
• Has seams that are overlapped and finished with a strong, durable top stitch and edges that are covered with soft, non-abrasive felt-rimmed bindings
• Protects the area of the hood that takes the most abuse
• Allows hood opening and easy engine access
• Can be stored easily in the trunk or under the seat
• Easy installation with no tools or hardware required

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MN3039	Covercraft	$31.80

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

Part Number	Brand	Price
C59MM42588	Covercraft	$93.66

• Made of tough vinyl material that has a soft fleeced backing
• The top of the hood curve is a styrene insert-reinforced bug deflector that creates a swirling wind to divert most bugs, dirt, and debris away from the windshield
• Custom-tailored to protect the front of the hood of most cars, vans, and pickups
• Can be used in any weather, including sun, snow or rain
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MD452	Covercraft	$43.75

• Made of heavy-gauge leather grain vinyl with soft, protective backing
• Designed with micro-perforated finish that allows the mask to breathe and permits moisture vapor to evaporate when the vehicle is driven in wet weather
• Has protective air intake screens that are sewn into the outside of the mask to avoid loosing pieces of material inside which can abrade the paint surface
• Its reinforced air foils prevent the mask from flapping and lifting
• A white non-woven fleece is also used in this protector for easier back-side cleaning
• Has seams that are overlapped and finished with a strong, durable top stitch and edges that are covered with soft, non-abrasive felt-rimmed bindings
• Protects the area of the hood that takes the most abuse
• Allows hood opening and easy engine access
• Can be stored easily in the trunk or under the seat
• Easy installation with no tools or hardware required

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MN452	Covercraft	$31.80

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MM42454	Covercraft	$93.66

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MM42453	Covercraft	$93.66

• Made of tough vinyl material that has a soft fleeced backing
• The top of the hood curve is a styrene insert-reinforced bug deflector that creates a swirling wind to divert most bugs, dirt, and debris away from the windshield
• Custom-tailored to protect the front of the hood of most cars, vans, and pickups
• Can be used in any weather, including sun, snow or rain
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MD452	Covercraft	$43.75

• Made of heavy-gauge leather grain vinyl with soft, protective backing
• Designed with micro-perforated finish that allows the mask to breathe and permits moisture vapor to evaporate when the vehicle is driven in wet weather
• Has protective air intake screens that are sewn into the outside of the mask to avoid loosing pieces of material inside which can abrade the paint surface
• Its reinforced air foils prevent the mask from flapping and lifting
• A white non-woven fleece is also used in this protector for easier back-side cleaning
• Has seams that are overlapped and finished with a strong, durable top stitch and edges that are covered with soft, non-abrasive felt-rimmed bindings
• Protects the area of the hood that takes the most abuse
• Allows hood opening and easy engine access
• Can be stored easily in the trunk or under the seat
• Easy installation with no tools or hardware required

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MN452	Covercraft	$31.80

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MM42452	Covercraft	$93.66

• Includes gel screen decals
• Made of flexible high-pressure injected polyurethane
• Requires prepping, priming, and painting prior to installation

Give your vehicle the sleek style of an American muscle car with 3d Carbon Hood Scoop. Fits perfectly and installs easily.

Part Number	Brand	Price
3DC691248	3dCarbon	$179.04