CAPA Certified Replacement hoods are zinc oxide coated and 1000 hours salt sprayed tested to make sure they are corrosion resistant. They are stamp die cut for a perfect fit for your vehicle and Electro Deposit Primered coated for strong and durable protection.

Part Number	Brand	Price
3205Q	Replacement	$75.65

• Includes installation instructions
• Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
• Designed with a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
• Provides protection against rock chips, bugs, road tar, and adverse weather conditions
• Adds a sporty look to your vehicle with its glove like, aerodynamic design
• Does not need to be removed when wet
• Molds to the contours of your vehicle's hood
• Easy installation with no tools required
• Just pop the hood, slip it on and tighten the straps
• All parts are pre-attached

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
L264592001	Lebra	$22.09

• Includes installation instructions
• Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
• Designed with a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
• Provides protection against rock chips, bugs, road tar, and adverse weather conditions
• Adds a sporty look to your vehicle with its glove like, aerodynamic design
• Does not need to be removed when wet
• Molds to the contours of your vehicle's hood
• Easy installation with no tools required
• Just pop the hood, slip it on and tighten the straps
• All parts are pre-attached

Part Number	Brand	Price
L264592501	Lebra	$22.97

• Includes installation instructions
• Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
• Designed with a 2-piece design that allows hood to open without removing the cover and a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
• Provides protection against rock chips, bugs, road tar, and adverse weather conditions
• Adds a sporty look to your vehicle with its glove like, aerodynamic design
• Does not need to be removed when wet
• Molds to the contours of your vehicle's hood
• Accommodates for pop-up headlights, fog lights, air-intakes, and all factory design features
• Easy installation with no tools required
• All parts are pre-attached

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
L265510401	Lebra	$61.74

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MM43196	Covercraft	$93.66

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MM43093	Covercraft	$93.66

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MM43093	Covercraft	$93.66

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MM43093	Covercraft	$93.66

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MM42584	Covercraft	$93.66

• Made of heavy-gauge leather grain vinyl with soft, protective backing
• Designed with micro-perforated finish that allows the mask to breathe and permits moisture vapor to evaporate when the vehicle is driven in wet weather
• Has protective air intake screens that are sewn into the outside of the mask to avoid loosing pieces of material inside which can abrade the paint surface
• Its reinforced air foils prevent the mask from flapping and lifting
• A white non-woven fleece is also used in this protector for easier back-side cleaning
• Has seams that are overlapped and finished with a strong, durable top stitch and edges that are covered with soft, non-abrasive felt-rimmed bindings
• Protects the area of the hood that takes the most abuse
• Allows hood opening and easy engine access
• Can be stored easily in the trunk or under the seat
• Easy installation with no tools or hardware required

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MN246	Covercraft	$31.80

• Made of tough vinyl material that has a soft fleeced backing
• The top of the hood curve is a styrene insert-reinforced bug deflector that creates a swirling wind to divert most bugs, dirt, and debris away from the windshield
• Custom-tailored to protect the front of the hood of most cars, vans, and pickups
• Can be used in any weather, including sun, snow or rain
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MD246	Covercraft	$43.75

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MM42246	Covercraft	$93.66

• Made of heavy-gauge leather grain vinyl with soft, protective backing
• Designed with micro-perforated finish that allows the mask to breathe and permits moisture vapor to evaporate when the vehicle is driven in wet weather
• Has protective air intake screens that are sewn into the outside of the mask to avoid loosing pieces of material inside which can abrade the paint surface
• Its reinforced air foils prevent the mask from flapping and lifting
• A white non-woven fleece is also used in this protector for easier back-side cleaning
• Has seams that are overlapped and finished with a strong, durable top stitch and edges that are covered with soft, non-abrasive felt-rimmed bindings
• Protects the area of the hood that takes the most abuse
• Allows hood opening and easy engine access
• Can be stored easily in the trunk or under the seat
• Easy installation with no tools or hardware required

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MN222	Covercraft	$31.80

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MM42222	Covercraft	$93.66

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59M222	Covercraft	$111.23

• Made of tough vinyl material that has a soft fleeced backing
• The top of the hood curve is a styrene insert-reinforced bug deflector that creates a swirling wind to divert most bugs, dirt, and debris away from the windshield
• Custom-tailored to protect the front of the hood of most cars, vans, and pickups
• Can be used in any weather, including sun, snow or rain
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MD222	Covercraft	$43.75

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MM42229	Covercraft	$93.66

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59M229	Covercraft	$111.23

• Made of tough vinyl material that has a soft fleeced backing
• The top of the hood curve is a styrene insert-reinforced bug deflector that creates a swirling wind to divert most bugs, dirt, and debris away from the windshield
• Custom-tailored to protect the front of the hood of most cars, vans, and pickups
• Can be used in any weather, including sun, snow or rain
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MD229	Covercraft	$43.75

Making your vehicle presentable as ever creates a big impact to what kind of owner you are. Plus a big factor they are - if their well maintained not just from the outside but to the small and tiniest part that can be found inside your vehicles such as hood hinges. Once they are damaged, they will be difficult for you to open and close your hood and perform some engine works. Make sure that your hood hinge are made from durable material for longer life and it should be a Replacement Hood Hinges.

Notes:

• Replaces OE numbers 5341048020 and 5342048020

Location/Orientation:

• Driver and passenger side

Replacement brand parts are the most affordable solution for all of your replacement needs! Replacement specializes in body parts and lighting products; it also stocks a wide array of Original Equipment (OE) quality electrical, brakes, suspension, intake, exhaust, cooling and heating parts. Unlike more expensive items from your dealer, the brand new parts we offer are the most economical in the market and are the perfect replacement for your old, broken or damaged OEM parts. Best of all, all Replacement brand items are backed by a 1-year, unlimited-mileage warranty.

Part Number	Brand	Price
L130505-PLK	Replacement	$32.32

Making your vehicle presentable as ever creates a big impact to what kind of owner you are. Plus a big factor they are - if their well maintained not just from the outside but to the small and tiniest part that can be found inside your vehicles such as hood hinges. Once they are damaged, they will be difficult for you to open and close your hood and perform some engine works. Make sure that your hood hinge are made from durable material for longer life and it should be a Replacement Hood Hinges.

Notes:

• Replaces OE numbers 5342189104 and 5342289103

Location/Orientation:

• Driver and passenger side

Replacement brand parts are the most affordable solution for all of your replacement needs! Replacement specializes in body parts and lighting products; it also stocks a wide array of Original Equipment (OE) quality electrical, brakes, suspension, intake, exhaust, cooling and heating parts. Unlike more expensive items from your dealer, the brand new parts we offer are the most economical in the market and are the perfect replacement for your old, broken or damaged OEM parts. Best of all, all Replacement brand items are backed by a 1-year, unlimited-mileage warranty.

Part Number	Brand	Price
T130513-PLK	Replacement	$5.09

Making your vehicle presentable as ever creates a big impact to what kind of owner you are. Plus a big factor they are - if their well maintained not just from the outside but to the small and tiniest part that can be found inside your vehicles such as hood hinges. Once they are damaged, they will be difficult for you to open and close your hood and perform some engine works. Make sure that your hood hinge are made from durable material for longer life and it should be a Replacement Hood Hinges.

Notes:

• Replaces OE numbers 5341089105 and 5341089105

Location/Orientation:

• Driver and passenger side

Replacement brand parts are the most affordable solution for all of your replacement needs! Replacement specializes in body parts and lighting products; it also stocks a wide array of Original Equipment (OE) quality electrical, brakes, suspension, intake, exhaust, cooling and heating parts. Unlike more expensive items from your dealer, the brand new parts we offer are the most economical in the market and are the perfect replacement for your old, broken or damaged OEM parts. Best of all, all Replacement brand items are backed by a 1-year, unlimited-mileage warranty.

Part Number	Brand	Price
3205-1-PLK	Replacement	$21.90

• Includes gel screen decals
• Made of flexible high-pressure injected polyurethane
• Requires prepping, priming, and painting prior to installation

Give your vehicle the sleek style of an American muscle car with 3d Carbon Hood Scoop. Fits perfectly and installs easily.

Part Number	Brand	Price
3DC691248	3dCarbon	$179.04