Replacement hoods are stamp die cut for a perfect fit for your vehicle; It went through 500 hours salt sprayed test to make sure it is corrosion resistant and Electro Deposit Primer coated for strong and durable protection.

Part Number	Brand	Price
D130104	Replacement	$260.48

• Includes installation instructions
• Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
• Designed with a 2-piece design that allows hood to open without removing the cover and a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
• Provides protection against rock chips, bugs, road tar, and adverse weather conditions
• Adds a sporty look to your vehicle with its glove like, aerodynamic design
• Does not need to be removed when wet
• Molds to the contours of your vehicle's hood
• Accommodates for pop-up headlights, fog lights, air-intakes, and all factory design features
• Easy installation with no tools required
• All parts are pre-attached

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
L2655114401	Lebra	$62.31

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MM43216	Covercraft	$93.66

• Made of heavy-gauge leather grain vinyl with soft, protective backing
• Designed with micro-perforated finish that allows the mask to breathe and permits moisture vapor to evaporate when the vehicle is driven in wet weather
• Has protective air intake screens that are sewn into the outside of the mask to avoid loosing pieces of material inside which can abrade the paint surface
• Its reinforced air foils prevent the mask from flapping and lifting
• A white non-woven fleece is also used in this protector for easier back-side cleaning
• Has seams that are overlapped and finished with a strong, durable top stitch and edges that are covered with soft, non-abrasive felt-rimmed bindings
• Protects the area of the hood that takes the most abuse
• Allows hood opening and easy engine access
• Can be stored easily in the trunk or under the seat
• Easy installation with no tools or hardware required

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MN3216	Covercraft	$31.80

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MM43132	Covercraft	$93.66

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MM43029	Covercraft	$93.66

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MM43102	Covercraft	$93.66

• Made of tough vinyl material that has a soft fleeced backing
• The top of the hood curve is a styrene insert-reinforced bug deflector that creates a swirling wind to divert most bugs, dirt, and debris away from the windshield
• Custom-tailored to protect the front of the hood of most cars, vans, and pickups
• Can be used in any weather, including sun, snow or rain
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MD496	Covercraft	$43.75

• Made of heavy-gauge leather grain vinyl with soft, protective backing
• Designed with micro-perforated finish that allows the mask to breathe and permits moisture vapor to evaporate when the vehicle is driven in wet weather
• Has protective air intake screens that are sewn into the outside of the mask to avoid loosing pieces of material inside which can abrade the paint surface
• Its reinforced air foils prevent the mask from flapping and lifting
• A white non-woven fleece is also used in this protector for easier back-side cleaning
• Has seams that are overlapped and finished with a strong, durable top stitch and edges that are covered with soft, non-abrasive felt-rimmed bindings
• Protects the area of the hood that takes the most abuse
• Allows hood opening and easy engine access
• Can be stored easily in the trunk or under the seat
• Easy installation with no tools or hardware required

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MN496	Covercraft	$31.80

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MM42583	Covercraft	$93.66

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MM42496	Covercraft	$93.66

• Made of tough vinyl material that has a soft fleeced backing
• The top of the hood curve is a styrene insert-reinforced bug deflector that creates a swirling wind to divert most bugs, dirt, and debris away from the windshield
• Custom-tailored to protect the front of the hood of most cars, vans, and pickups
• Can be used in any weather, including sun, snow or rain
• Easy no-drill installation

Part Number	Brand	Price
C59MD420	Covercraft	$43.75

• Made of heavy-gauge leather grain vinyl with soft, protective backing
• Designed with micro-perforated finish that allows the mask to breathe and permits moisture vapor to evaporate when the vehicle is driven in wet weather
• Has protective air intake screens that are sewn into the outside of the mask to avoid loosing pieces of material inside which can abrade the paint surface
• Its reinforced air foils prevent the mask from flapping and lifting
• A white non-woven fleece is also used in this protector for easier back-side cleaning
• Has seams that are overlapped and finished with a strong, durable top stitch and edges that are covered with soft, non-abrasive felt-rimmed bindings
• Protects the area of the hood that takes the most abuse
• Allows hood opening and easy engine access
• Can be stored easily in the trunk or under the seat
• Easy installation with no tools or hardware required

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MN420	Covercraft	$31.80

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MM42410	Covercraft	$93.66

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

Part Number	Brand	Price
C59MM42413	Covercraft	$93.66

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

Part Number	Brand	Price
C59MM42411	Covercraft	$93.66

• Made of tough vinyl material that has a soft fleeced backing
• The top of the hood curve is a styrene insert-reinforced bug deflector that creates a swirling wind to divert most bugs, dirt, and debris away from the windshield
• Custom-tailored to protect the front of the hood of most cars, vans, and pickups
• Can be used in any weather, including sun, snow or rain
• Easy no-drill installation

Part Number	Brand	Price
C59MD420	Covercraft	$43.75

• Made of heavy-gauge leather grain vinyl with soft, protective backing
• Designed with micro-perforated finish that allows the mask to breathe and permits moisture vapor to evaporate when the vehicle is driven in wet weather
• Has protective air intake screens that are sewn into the outside of the mask to avoid loosing pieces of material inside which can abrade the paint surface
• Its reinforced air foils prevent the mask from flapping and lifting
• A white non-woven fleece is also used in this protector for easier back-side cleaning
• Has seams that are overlapped and finished with a strong, durable top stitch and edges that are covered with soft, non-abrasive felt-rimmed bindings
• Protects the area of the hood that takes the most abuse
• Allows hood opening and easy engine access
• Can be stored easily in the trunk or under the seat
• Easy installation with no tools or hardware required

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MN420	Covercraft	$31.80

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

• This product will be shipped out from our facility 3-4 weeks after the order has been confirmed

Part Number	Brand	Price
C59MM42420	Covercraft	$93.66

• Made from heavy-gauge leather grain vinyl with soft padded protective backing
• Custom tailored for exact fit and allows hood to open with mask in place
• Provides protection from nicks, stones, and scratches
• Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
• Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
• Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
• Easy no-drill installation

Part Number	Brand	Price
C59M437	Covercraft	$111.23