|
|
1975-1980 Chevrolet K5 Blazer Replacement Hood
HOOD, GALVANIZED STEEL, PRIMERED -- With vent holes; A high quality, OE replacement hood; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
 |
| 6711 |
Replacement |
$221.87 |
|
|
|
|
1981-1986 Chevrolet K5 Blazer Replacement Hood
HOOD, GALVANIZED STEEL, PRIMERED -- A high quality, OE replacement hood; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| 6712 |
Replacement |
$114.27 |
|
|
|
|
1981-1986 Chevrolet K5 Blazer Lebra Car Bra
LEBRA CUSTOM HOOD PROTECTOR, VINYL, BLACK
The stylish and affordable way to protect your vehicle's hood from common road hazards such as rock chips, bugs, and tar.
Features:- Includes installation instructions
- Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
- Designed with a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
- Provides protection against rock chips, bugs, road tar, and adverse weather conditions
- Adds a sporty look to your vehicle with its glove like, aerodynamic design
- Does not need to be removed when wet
- Molds to the contours of your vehicle's hood
- Easy installation with no tools required
- Just pop the hood, slip it on and tighten the straps
- All parts are pre-attached
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| L264512001 |
Lebra |
$22.97 |
|
|
|
|
1981-1986 Chevrolet K5 Blazer Lebra Car Bra
LEBRA CUSTOM FRONT END COVER, VINYL, BLACK
The easiest way to protect your vehicle from unexpected road damage. These LeBra custom front end covers have stylish protection that makes your vehicle look great.
Features:- Includes installation instructions
- Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
- Designed with a 2-piece design that allows hood to open without removing the cover and a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
- Provides protection against rock chips, bugs, road tar, and adverse weather conditions
- Adds a sporty look to your vehicle with its glove like, aerodynamic design
- Does not need to be removed when wet
- Molds to the contours of your vehicle's hood
- Accommodates for pop-up headlights, fog lights, air-intakes, and all factory design features
- Easy installation with no tools required
- All parts are pre-attached
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| L265505401 |
Lebra |
$61.74 |
|
|
|
|
1981-1986 Chevrolet K5 Blazer Covercraft Car Bra
COVERCRAFT MD SERIES DEFLECTOR-PROTECTOR HOOD SHIELD, VINYL, BLACK
Covercraft MD Series Deflector-Protector is a hood protector with a built-in bug deflector. Unlike hard plastic bug deflectors, Deflector-Protector can be removed in minutes and stored in your vehicle's trunk or behind the seat.
Features:- Made of tough vinyl material that has a soft fleeced backing
- The top of the hood curve is a styrene insert-reinforced bug deflector that creates a swirling wind to divert most bugs, dirt, and debris away from the windshield
- Custom-tailored to protect the front of the hood of most cars, vans, and pickups
- Can be used in any weather, including sun, snow or rain
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59MD201 |
Covercraft |
$43.75 |
|
|
|
|
1981-1986 Chevrolet K5 Blazer Covercraft Car Bra
COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE
Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.
Features:- Made from heavy-gauge leather grain vinyl with soft padded protective backing
- Custom tailored for exact fit and allows hood to open with mask in place
- Provides protection from nicks, stones, and scratches
- Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
- Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
- Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59MM42205 |
Covercraft |
$93.66 |
|
|
|
|
1975-1980 Chevrolet K5 Blazer Covercraft Car Bra
COVERCRAFT M SERIES FULL FRONT END MASK, VINYL, BLACK
Covercraft M Series custom front end masks are designed as one-piece units for ease of installation and maximum protection.
Features:- Made from heavy-gauge leather grain vinyl with soft padded protective backing
- Custom tailored for exact fit and allows hood to open with mask in place
- Provides protection from nicks, stones, and scratches
- Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
- Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
- Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59M202 |
Covercraft |
$111.23 |
|
|
|
|
1981-1986 Chevrolet K5 Blazer Replacement Hood Latch
HOOD LATCH, STEEL, BLACK -- A high quality, OE replacement hood latch; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| C132301 |
Replacement |
$12.92 |
|
|
|
|
1981-1986 Chevrolet K5 Blazer Keyparts Hoods Cowl Hood
KEYPARTS HOODS COWL INDUCTION STYLE HOOD, STEEL, PRIMERED -- 2 in.; Reverse cowl; Made from die-stamped 19-gauge steel sheet; Designed and constructed using precision tooling for high standard fit, style, and finish; Features black EDP coating for rust protection, strength, and durability; Extensively tested to ensure quality; Paintable to match vehicle color; Uses factory hardware and fasteners for easy installation.
| Part Number |
Brand |
Price |
|
| KPH0851-035H |
Keyparts Hoods |
$449.00 |
|
|
|
|
1975-1980 Chevrolet K5 Blazer Keyparts Hoods Cowl Hood
KEYPARTS HOODS COWL INDUCTION STYLE HOOD, STEEL, PRIMERED -- 2 in.; Reverse cowl; Made from die-stamped 19-gauge steel sheet; Designed and constructed using precision tooling for high standard fit, style, and finish; Features black EDP coating for rust protection, strength, and durability; Extensively tested to ensure quality; Paintable to match vehicle color; Uses factory hardware and fasteners for easy installation.
| Part Number |
Brand |
Price |
|
| KPH0850-035H |
Keyparts Hoods |
$459.00 |
|
|
|
|
1985-1986 Chevrolet K5 Blazer Dorman Hood Latch
DORMAN HOOD LATCH, STEEL, BLACK, SOLD INDIVIDUALLY -- A high quality, OE replacement hood latch; Replaces OE number 15757371; With lifetime Dorman limited warranty.
| Part Number |
Brand |
Price |
|
| RB315100 |
Dorman |
$38.62 |
|
|
|
|
1975-1986 Chevrolet K5 Blazer EFX Cowl Hood
EFX STRAIGHT COWL STYLE HOOD, STEEL -- Made of durable steel with factory-style internal framing; Comes primed and ready to paint to match your vehicle's color; Easy bolt-on installation using all of your factory hardware.
| Part Number |
Brand |
Price |
|
| EFXEFXC1073V1 |
EFX |
$313.10 |
|
|
|
|
1981-1986 Chevrolet K5 Blazer Dorman Hood Cable
DORMAN HOOD RELEASE CABLE -- With handle; A high quality, OE replacement hood release cable; Replaces OE number 14039963; With lifetime Dorman limited warranty.
| Part Number |
Brand |
Price |
|
| RB912020 |
Dorman |
$39.79 |
|
|
|
|
1975-1986 Chevrolet K5 Blazer SLP Performance Parts Hood Scoop
SLP PERFORMANCE PARTS HOOD SCOOP, ABS PLASTIC, UNPAINTED, SOLD INDIVIDUALLY -- 25.5 in. length; 20 in. front width; 25.25 in. back width; 1-7/8 in. height; Includes tape, hardware, and installation instructions; Made of OEM-quality composite ABS material that is UV stable to prevent distortion due to heat and cold; Designed to enhance the aggressive looks of your vehicle; Paintable to match the color of your vehicle.
| Part Number |
Brand |
Price |
|
| SLP10005 |
SLP Performance Parts |
$129.47 |
|
|
|
