|
|
1997-2004 Buick Regal Replacement Hood
HOOD, GALVANIZED STEEL, PRIMERED
This high quality, OE replacement hood is supplied by a CAPA certified, QS9001, and ISO9001 manufacturing facility. Backed by 1-year, unlimited-mileage warranty.Replacement hoods are stamp die cut for a perfect fit for your vehicle; It went through 500 hours salt sprayed test to make sure it is corrosion resistant and Electro Deposit Primer coated for strong and durable protection.
| Part Number |
Brand |
Price |
 |
| 5330 |
Replacement |
$222.24 |
|
|
|
|
1997-2004 Buick Regal Replacement Hood
HOOD, GALVANIZED STEEL, PRIMERED -- CAPA certified; A high quality, OE replacement hood; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| 5330Q |
Replacement |
$144.07 |
|
|
|
|
1999-2004 Buick Regal Stabilus Lift Support
STABILUS GAS-CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- Allows effortless opening and safe closing of the hood; Hood stays reliably secure in position and cannot slam shut when open; Absolutely maintenance-free; A high quality, OE replacement gas-charged hood lift support; Easy installation; With lifetime Stabilus limited warranty.
| Part Number |
Brand |
Price |
|
| S2SG230023 |
Stabilus |
$16.80 |
|
|
|
|
|
1997-2000 Buick Regal Stabilus Lift Support
STABILUS GAS-CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- Allows effortless opening and safe closing of the hood; Hood stays reliably secure in position and cannot slam shut when open; Absolutely maintenance-free; A high quality, OE replacement gas-charged hood lift support; Easy installation; With lifetime Stabilus limited warranty.
| Part Number |
Brand |
Price |
|
| S2SG230023 |
Stabilus |
$16.80 |
|
|
|
|
|
1993-1996 Buick Regal Stabilus Lift Support
STABILUS GAS-CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- Allows effortless opening and safe closing of the hood; Hood stays reliably secure in position and cannot slam shut when open; Absolutely maintenance-free; A high quality, OE replacement gas-charged hood lift support; Easy installation; With lifetime Stabilus limited warranty.
| Part Number |
Brand |
Price |
|
| S2SG330034 |
Stabilus |
$18.29 |
|
|
|
|
|
1988-1992 Buick Regal Stabilus Lift Support
STABILUS GAS-CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- Allows effortless opening and safe closing of the hood; Hood stays reliably secure in position and cannot slam shut when open; Absolutely maintenance-free; A high quality, OE replacement gas-charged hood lift support; Easy installation; With lifetime Stabilus limited warranty.
| Part Number |
Brand |
Price |
|
| S2SG330010 |
Stabilus |
$14.55 |
|
|
|
|
|
1978-1987 Buick Regal Stabilus Lift Support
STABILUS GAS-CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- Allows effortless opening and safe closing of the hood; Hood stays reliably secure in position and cannot slam shut when open; Absolutely maintenance-free; A high quality, OE replacement gas-charged hood lift support; Easy installation; With lifetime Stabilus limited warranty.
| Part Number |
Brand |
Price |
|
| S2SG330004 |
Stabilus |
$12.77 |
|
|
|
|
|
1985 Buick Somerset Regal Stabilus Lift Support
STABILUS GAS-CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- Allows effortless opening and safe closing of the hood; Hood stays reliably secure in position and cannot slam shut when open; Absolutely maintenance-free; A high quality, OE replacement gas-charged hood lift support; Easy installation; With lifetime Stabilus limited warranty.
| Part Number |
Brand |
Price |
|
| S2SG430007 |
Stabilus |
$13.19 |
|
|
|
|
|
1978-1980 Buick Regal Stabilus Lift Support
STABILUS GAS-CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- Allows effortless opening and safe closing of the hood; Hood stays reliably secure in position and cannot slam shut when open; Absolutely maintenance-free; A high quality, OE replacement gas-charged hood lift support; Easy installation; With lifetime Stabilus limited warranty.
| Part Number |
Brand |
Price |
|
| S2SG330007 |
Stabilus |
$14.50 |
|
|
|
|
1997-2004 Buick Regal Strong Arm Lift Support
STRONG ARM GAS CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- 6.15 in. stroke length; 15.59 in. compressed length; 21.74 in. extended length; 0.59 in. body diameter; 0.24 in. shaft diameter; With nylon ball socket for shaft and body connections; Made from a chromium-plated hardened steel rod and glossy finish heavy gauge steel body; Designed with self-cleaning orifice that keeps the piston area free of contaminants, reduces clogging, and prevents lock up; Features a sealing system that uses a Triple-Lobe rubber seal and rubber O-ring piston seal that withstand high pressure, vibration, side-loading, and misalignment; Provided with nitrogen gas charge up to 2500 psi that does not affect any of the internal components and glycol fluid lubricant to slow down the movement prior to full open; With 2-year Strong Arm limited warranty.
| Part Number |
Brand |
Price |
|
| STA4295 |
Strong Arm |
$14.69 |
|
|
|
|
1988-1996 Buick Regal Strong Arm Lift Support
STRONG ARM GAS CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- 5.14 in. stroke length; 16.21 in. compressed length; 21.35 in. extended length; 0.59 in. body diameter; 0.24 in. shaft diameter; With blade for shaft connection and nylon ball socket for body connection; Made from a chromium-plated hardened steel rod and glossy finish heavy gauge steel body; Designed with self-cleaning orifice that keeps the piston area free of contaminants, reduces clogging, and prevents lock up; Features a sealing system that uses a Triple-Lobe rubber seal and rubber O-ring piston seal that withstand high pressure, vibration, side-loading, and misalignment; Provided with nitrogen gas charge up to 2500 psi that does not affect any of the internal components and glycol fluid lubricant to slow down the movement prior to full open; With 2-year Strong Arm limited warranty.
| Part Number |
Brand |
Price |
|
| STA4463 |
Strong Arm |
$14.69 |
|
|
|
|
1978-1987 Buick Regal Strong Arm Lift Support
STRONG ARM GAS CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- 5.57 in. stroke length; 9.76 in. compressed length; 15.33 in. extended length; 0.75 in. body diameter; 0.31 in. shaft diameter; With blade plus retainer for shaft connection and blade for body connection; Made from a chromium-plated hardened steel rod and glossy finish heavy gauge steel body; Designed with self-cleaning orifice that keeps the piston area free of contaminants, reduces clogging, and prevents lock up; Features a sealing system that uses a Triple-Lobe rubber seal and rubber O-ring piston seal that withstand high pressure, vibration, side-loading, and misalignment; Provided with nitrogen gas charge up to 2500 psi that does not affect any of the internal components and glycol fluid lubricant to slow down the movement prior to full open; With 2-year Strong Arm limited warranty.
| Part Number |
Brand |
Price |
|
| STA4428 |
Strong Arm |
$18.23 |
|
|
|
|
1982-1987 Buick Regal Strong Arm Lift Support
STRONG ARM GAS CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- 5.62 in. stroke length; 9.73 in. compressed length; 15.35 in. extended length; 0.75 in. body diameter; 0.31 in. shaft diameter; With blade for shaft and body connections; Made from a chromium-plated hardened steel rod and glossy finish heavy gauge steel body; Designed with self-cleaning orifice that keeps the piston area free of contaminants, reduces clogging, and prevents lock up; Features a sealing system that uses a Triple-Lobe rubber seal and rubber O-ring piston seal that withstand high pressure, vibration, side-loading, and misalignment; Provided with nitrogen gas charge up to 2500 psi that does not affect any of the internal components and glycol fluid lubricant to slow down the movement prior to full open; With 2-year Strong Arm limited warranty.
| Part Number |
Brand |
Price |
|
| STA4491 |
Strong Arm |
$13.31 |
|
|
|
|
1985 Buick Somerset Regal Strong Arm Lift Support
STRONG ARM GAS CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- 3.77 in. stroke length; 8.23 in. compressed length; 12 in. extended length; 0.75 in. body diameter; 0.31 in. shaft diameter; With blade for shaft connection and nylon ball socket for body connection; Made from a chromium-plated hardened steel rod and glossy finish heavy gauge steel body; Designed with self-cleaning orifice that keeps the piston area free of contaminants, reduces clogging, and prevents lock up; Features a sealing system that uses a Triple-Lobe rubber seal and rubber O-ring piston seal that withstand high pressure, vibration, side-loading, and misalignment; Provided with nitrogen gas charge up to 2500 psi that does not affect any of the internal components and glycol fluid lubricant to slow down the movement prior to full open; With 2-year Strong Arm limited warranty.
| Part Number |
Brand |
Price |
|
| STA4446 |
Strong Arm |
$13.61 |
|
|
|
|
|
1978-1981 Buick Regal Strong Arm Lift Support
STRONG ARM GAS CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- 5.62 in. stroke length; 9.73 in. compressed length; 15.35 in. extended length; 0.75 in. body diameter; 0.31 in. shaft diameter; With blade for shaft and body connections; Made from a chromium-plated hardened steel rod and glossy finish heavy gauge steel body; Designed with self-cleaning orifice that keeps the piston area free of contaminants, reduces clogging, and prevents lock up; Features a sealing system that uses a Triple-Lobe rubber seal and rubber O-ring piston seal that withstand high pressure, vibration, side-loading, and misalignment; Provided with nitrogen gas charge up to 2500 psi that does not affect any of the internal components and glycol fluid lubricant to slow down the movement prior to full open; With 2-year Strong Arm limited warranty.
| Part Number |
Brand |
Price |
|
| STA4491 |
Strong Arm |
$13.31 |
|
|
|
|
1998-2004 Buick Regal Lebra Car Bra
LEBRA CUSTOM FRONT END COVER, VINYL, BLACK
The easiest way to protect your vehicle from unexpected road damage. These LeBra custom front end covers have stylish protection that makes your vehicle look great.
Features:- Includes installation instructions
- Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
- Designed with a 2-piece design that allows hood to open without removing the cover and a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
- Provides protection against rock chips, bugs, road tar, and adverse weather conditions
- Adds a sporty look to your vehicle with its glove like, aerodynamic design
- Does not need to be removed when wet
- Molds to the contours of your vehicle's hood
- Accommodates for pop-up headlights, fog lights, air-intakes, and all factory design features
- Easy installation with no tools required
- All parts are pre-attached
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| L265567001 |
Lebra |
$58.41 |
|
|
|
|
|
1997 Buick Regal Lebra Car Bra
LEBRA CUSTOM FRONT END COVER, VINYL, BLACK
The easiest way to protect your vehicle from unexpected road damage. These LeBra custom front end covers have stylish protection that makes your vehicle look great.
Features:- Includes installation instructions
- Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
- Designed with a 2-piece design that allows hood to open without removing the cover and a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
- Provides protection against rock chips, bugs, road tar, and adverse weather conditions
- Adds a sporty look to your vehicle with its glove like, aerodynamic design
- Does not need to be removed when wet
- Molds to the contours of your vehicle's hood
- Accommodates for pop-up headlights, fog lights, air-intakes, and all factory design features
- Easy installation with no tools required
- All parts are pre-attached
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| L265567001 |
Lebra |
$58.41 |
|
|
|
|
1998-2004 Buick Regal Lebra Car Bra
LEBRA CUSTOM HOOD PROTECTOR, VINYL, BLACK
The stylish and affordable way to protect your vehicle's hood from common road hazards such as rock chips, bugs, and tar.
Features:- Includes installation instructions
- Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
- Designed with a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
- Provides protection against rock chips, bugs, road tar, and adverse weather conditions
- Adds a sporty look to your vehicle with its glove like, aerodynamic design
- Does not need to be removed when wet
- Molds to the contours of your vehicle's hood
- Easy installation with no tools required
- Just pop the hood, slip it on and tighten the straps
- All parts are pre-attached
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| L264504101 |
Lebra |
$21.53 |
|
|
|
|
|
1997 Buick Regal Lebra Car Bra
LEBRA CUSTOM HOOD PROTECTOR, VINYL, BLACK
The stylish and affordable way to protect your vehicle's hood from common road hazards such as rock chips, bugs, and tar.
Features:- Includes installation instructions
- Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
- Designed with a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
- Provides protection against rock chips, bugs, road tar, and adverse weather conditions
- Adds a sporty look to your vehicle with its glove like, aerodynamic design
- Does not need to be removed when wet
- Molds to the contours of your vehicle's hood
- Easy installation with no tools required
- Just pop the hood, slip it on and tighten the straps
- All parts are pre-attached
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| L264504101 |
Lebra |
$21.53 |
|
|
|
|
1991-1994 Buick Regal Lebra Car Bra
LEBRA CUSTOM FRONT END COVER, VINYL, BLACK
The easiest way to protect your vehicle from unexpected road damage. These LeBra custom front end covers have stylish protection that makes your vehicle look great.
Features:- Includes installation instructions
- Made of durable, micro-perforated leather grain vinyl that dries itself while you drive
- Designed with a 2-piece design that allows hood to open without removing the cover and a special knit backing that absorbs less moisture and is gentle on your vehicle's finish
- Provides protection against rock chips, bugs, road tar, and adverse weather conditions
- Adds a sporty look to your vehicle with its glove like, aerodynamic design
- Does not need to be removed when wet
- Molds to the contours of your vehicle's hood
- Accommodates for pop-up headlights, fog lights, air-intakes, and all factory design features
- Easy installation with no tools required
- All parts are pre-attached
| Part Number |
Brand |
Price |
|
| L265539301 |
Lebra |
$63.42 |
|
|
|
|
1999-2004 Buick Regal Monroe Lift Support
MONROE MAX-LIFT GAS-CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- Includes installation instructions; Made of steel body pressure cylinder and nitro-carbonized rod for exceptional corrosion resistance and durability; Features plastic rod guide to reduce potential rod abrasion, main seal to provide positive closure for high pressure gas, and stop collar and limiting groove to assure precise extended length; High strength piston assembly with leak-proof seal helps prevent fluid leakage around the piston to allow fluid to pass efficiently through the piston valving components thus providing controlled lift and consistent performance; Exact replacement for worn out original unit.
| Part Number |
Brand |
Price |
|
| TS901357 |
Monroe |
$16.25 |
|
|
|
|
1997-2004 Buick Regal Monroe Lift Support
MONROE MAX-LIFT GAS-CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- Includes installation instructions; Made of steel body pressure cylinder and nitro-carbonized rod for exceptional corrosion resistance and durability; Features plastic rod guide to reduce potential rod abrasion, main seal to provide positive closure for high pressure gas, and stop collar and limiting groove to assure precise extended length; High strength piston assembly with leak-proof seal helps prevent fluid leakage around the piston to allow fluid to pass efficiently through the piston valving components thus providing controlled lift and consistent performance; Exact replacement for worn out original unit.
| Part Number |
Brand |
Price |
|
| TS901356 |
Monroe |
$20.47 |
|
|
|
|
1988-1996 Buick Regal Monroe Lift Support
MONROE MAX-LIFT GAS-CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- 16.5 in. compressed length; 20.38 in. extended length; 3.88 in. travel; Includes installation instructions; Made of steel body pressure cylinder and nitro-carbonized rod for exceptional corrosion resistance and durability; Features plastic rod guide to reduce potential rod abrasion, main seal to provide positive closure for high pressure gas, and stop collar and limiting groove to assure precise extended length; High strength piston assembly with leak-proof seal helps prevent fluid leakage around the piston to allow fluid to pass efficiently through the piston valving components thus providing controlled lift and consistent performance; Exact replacement for worn out original unit.
| Part Number |
Brand |
Price |
|
| TS901162 |
Monroe |
$26.93 |
|
|
|
|
1988-1992 Buick Regal Monroe Lift Support
MONROE MAX-LIFT GAS-CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- 16.5 in. compressed length; 21.38 in. extended length; 4.88 in. travel; Includes installation instructions; Made of steel body pressure cylinder and nitro-carbonized rod for exceptional corrosion resistance and durability; Features plastic rod guide to reduce potential rod abrasion, main seal to provide positive closure for high pressure gas, and stop collar and limiting groove to assure precise extended length; High strength piston assembly with leak-proof seal helps prevent fluid leakage around the piston to allow fluid to pass efficiently through the piston valving components thus providing controlled lift and consistent performance; Exact replacement for worn out original unit.
| Part Number |
Brand |
Price |
|
| TS901253 |
Monroe |
$25.57 |
|
|
|
|
1981-1987 Buick Regal Monroe Lift Support
MONROE MAX-LIFT GAS-CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- 9.5 in. compressed length; 15.38 in. extended length; 5.88 in. travel; Includes installation instructions; Made of steel body pressure cylinder and nitro-carbonized rod for exceptional corrosion resistance and durability; Features plastic rod guide to reduce potential rod abrasion, main seal to provide positive closure for high pressure gas, and stop collar and limiting groove to assure precise extended length; High strength piston assembly with leak-proof seal helps prevent fluid leakage around the piston to allow fluid to pass efficiently through the piston valving components thus providing controlled lift and consistent performance; Exact replacement for worn out original unit.
| Part Number |
Brand |
Price |
|
| TS901203 |
Monroe |
$14.45 |
|
|
|
|
1985 Buick Somerset Regal Monroe Lift Support
MONROE MAX-LIFT GAS-CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- 7.88 in. compressed length; 12 in. extended length; 4.13 in. travel; Includes installation instructions; Made of steel body pressure cylinder and nitro-carbonized rod for exceptional corrosion resistance and durability; Features plastic rod guide to reduce potential rod abrasion, main seal to provide positive closure for high pressure gas, and stop collar and limiting groove to assure precise extended length; High strength piston assembly with leak-proof seal helps prevent fluid leakage around the piston to allow fluid to pass efficiently through the piston valving components thus providing controlled lift and consistent performance; Exact replacement for worn out original unit.
| Part Number |
Brand |
Price |
|
| TS901318 |
Monroe |
$16.56 |
|
|
|
|
|
1978-1980 Buick Regal Monroe Lift Support
MONROE MAX-LIFT GAS-CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- 9.5 in. compressed length; 15.38 in. extended length; 5.88 in. travel; Includes installation instructions; Made of steel body pressure cylinder and nitro-carbonized rod for exceptional corrosion resistance and durability; Features plastic rod guide to reduce potential rod abrasion, main seal to provide positive closure for high pressure gas, and stop collar and limiting groove to assure precise extended length; High strength piston assembly with leak-proof seal helps prevent fluid leakage around the piston to allow fluid to pass efficiently through the piston valving components thus providing controlled lift and consistent performance; Exact replacement for worn out original unit.
| Part Number |
Brand |
Price |
|
| TS901203 |
Monroe |
$14.45 |
|
|
|
|
1997-2003 Buick Regal Covercraft Car Bra
COVERCRAFT MN SERIES MINI-MASK HOOD PROTECTOR, VINYL, BLACK
Covercraft MN Series Mini-Mask hood protector offers an economical alternative to a full front mask. It is designed to protect the area of the hood that takes the most abuse.
Features:- Made of heavy-gauge leather grain vinyl with soft, protective backing
- Designed with micro-perforated finish that allows the mask to breathe and permits moisture vapor to evaporate when the vehicle is driven in wet weather
- Has protective air intake screens that are sewn into the outside of the mask to avoid loosing pieces of material inside which can abrade the paint surface
- Its reinforced air foils prevent the mask from flapping and lifting
- A white non-woven fleece is also used in this protector for easier back-side cleaning
- Has seams that are overlapped and finished with a strong, durable top stitch and edges that are covered with soft, non-abrasive felt-rimmed bindings
- Protects the area of the hood that takes the most abuse
- Allows hood opening and easy engine access
- Can be stored easily in the trunk or under the seat
- Easy installation with no tools or hardware required
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59MN920 |
Covercraft |
$31.80 |
|
|
|
|
1997-2003 Buick Regal Covercraft Car Bra
COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE
Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.
Features:- Made from heavy-gauge leather grain vinyl with soft padded protective backing
- Custom tailored for exact fit and allows hood to open with mask in place
- Provides protection from nicks, stones, and scratches
- Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
- Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
- Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59MM42921 |
Covercraft |
$93.66 |
|
|
|
|
1995-1996 Buick Regal Covercraft Car Bra
COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE
Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.
Features:- Made from heavy-gauge leather grain vinyl with soft padded protective backing
- Custom tailored for exact fit and allows hood to open with mask in place
- Provides protection from nicks, stones, and scratches
- Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
- Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
- Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59MM42518 |
Covercraft |
$93.66 |
|
|
|
|
1995-1996 Buick Regal Covercraft Car Bra
COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE
Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.
Features:- Made from heavy-gauge leather grain vinyl with soft padded protective backing
- Custom tailored for exact fit and allows hood to open with mask in place
- Provides protection from nicks, stones, and scratches
- Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
- Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
- Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59MM42519 |
Covercraft |
$93.66 |
|
|
|
|
1992-1994 Buick Regal Covercraft Car Bra
COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE
Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.
Features:- Made from heavy-gauge leather grain vinyl with soft padded protective backing
- Custom tailored for exact fit and allows hood to open with mask in place
- Provides protection from nicks, stones, and scratches
- Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
- Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
- Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59MM42528 |
Covercraft |
$93.66 |
|
|
|
|
1993-1994 Buick Regal Covercraft Car Bra
COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE
Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.
Features:- Made from heavy-gauge leather grain vinyl with soft padded protective backing
- Custom tailored for exact fit and allows hood to open with mask in place
- Provides protection from nicks, stones, and scratches
- Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
- Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
- Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59MM42522 |
Covercraft |
$93.66 |
|
|
|
|
1993-1994 Buick Regal Covercraft Car Bra
COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE
Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.
Features:- Made from heavy-gauge leather grain vinyl with soft padded protective backing
- Custom tailored for exact fit and allows hood to open with mask in place
- Provides protection from nicks, stones, and scratches
- Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
- Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
- Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
- Easy no-drill installation
| Part Number |
Brand |
Price |
|
| C59MM42523 |
Covercraft |
$93.66 |
|
|
|
|
1988-1994 Buick Regal Covercraft Car Bra
COVERCRAFT MH SERIES DEFLECTOR-PROTECTOR HOOD SHIELD, VINYL, BLACK
Covercraft MD Series Deflector-Protector is a hood protector with a built-in bug deflector. Unlike hard plastic bug deflectors, Deflector-Protector can be removed in minutes and stored in your vehicle's trunk or behind the seat.
Features:- Made of tough vinyl material that has a soft fleeced backing
- The top of the hood curve is a styrene insert-reinforced bug deflector that creates a swirling wind to divert most bugs, dirt, and debris away from the windshield
- Custom-tailored to protect the front of the hood of most cars, vans, and pickups
- Can be used in any weather, including sun, snow or rain
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59MH525 |
Covercraft |
$43.75 |
|
|
|
|
1991-1994 Buick Regal Covercraft Car Bra
COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE
Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.
Features:- Made from heavy-gauge leather grain vinyl with soft padded protective backing
- Custom tailored for exact fit and allows hood to open with mask in place
- Provides protection from nicks, stones, and scratches
- Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
- Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
- Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59MM42527 |
Covercraft |
$93.66 |
|
|
|
|
|
1991-1994 Buick Regal Covercraft Car Bra
COVERCRAFT MH SERIES DEFLECTOR-PROTECTOR HOOD SHIELD, VINYL, BLACK
Covercraft MD Series Deflector-Protector is a hood protector with a built-in bug deflector. Unlike hard plastic bug deflectors, Deflector-Protector can be removed in minutes and stored in your vehicle's trunk or behind the seat.
Features:- Made of tough vinyl material that has a soft fleeced backing
- The top of the hood curve is a styrene insert-reinforced bug deflector that creates a swirling wind to divert most bugs, dirt, and debris away from the windshield
- Custom-tailored to protect the front of the hood of most cars, vans, and pickups
- Can be used in any weather, including sun, snow or rain
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59MH525 |
Covercraft |
$43.75 |
|
|
|
|
1991-1992 Buick Regal Covercraft Car Bra
COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE
Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.
Features:- Made from heavy-gauge leather grain vinyl with soft padded protective backing
- Custom tailored for exact fit and allows hood to open with mask in place
- Provides protection from nicks, stones, and scratches
- Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
- Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
- Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59MM42530 |
Covercraft |
$93.66 |
|
|
|
|
1992 Buick Regal Covercraft Car Bra
COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE
Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.
Features:- Made from heavy-gauge leather grain vinyl with soft padded protective backing
- Custom tailored for exact fit and allows hood to open with mask in place
- Provides protection from nicks, stones, and scratches
- Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
- Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
- Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59MM42531 |
Covercraft |
$93.66 |
|
|
|
|
1989-1990 Buick Regal Covercraft Car Bra
COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE
Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.
Features:- Made from heavy-gauge leather grain vinyl with soft padded protective backing
- Custom tailored for exact fit and allows hood to open with mask in place
- Provides protection from nicks, stones, and scratches
- Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
- Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
- Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59MM42526 |
Covercraft |
$93.66 |
|
|
|
|
1988 Buick Regal Covercraft Car Bra
COVERCRAFT M SERIES FULL FRONT END MASK, VINYL, BLACK
Covercraft M Series custom front end masks are designed as one-piece units for ease of installation and maximum protection.
Features:- Made from heavy-gauge leather grain vinyl with soft padded protective backing
- Custom tailored for exact fit and allows hood to open with mask in place
- Provides protection from nicks, stones, and scratches
- Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
- Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
- Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59M525 |
Covercraft |
$111.23 |
|
|
|
|
1988 Buick Regal Covercraft Car Bra
COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE
Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.
Features:- Made from heavy-gauge leather grain vinyl with soft padded protective backing
- Custom tailored for exact fit and allows hood to open with mask in place
- Provides protection from nicks, stones, and scratches
- Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
- Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
- Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59MM42525 |
Covercraft |
$93.66 |
|
|
|
|
1984-1987 Buick Regal Covercraft Car Bra
COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE
Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.
Features:- Made from heavy-gauge leather grain vinyl with soft padded protective backing
- Custom tailored for exact fit and allows hood to open with mask in place
- Provides protection from nicks, stones, and scratches
- Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
- Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
- Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
- Easy no-drill installation
| Part Number |
Brand |
Price |
|
| C59MM42125 |
Covercraft |
$93.66 |
|
|
|
|
1987 Buick Regal Covercraft Car Bra
COVERCRAFT M SERIES FULL FRONT END MASK, VINYL, BLACK
Covercraft M Series custom front end masks are designed as one-piece units for ease of installation and maximum protection.
Features:- Made from heavy-gauge leather grain vinyl with soft padded protective backing
- Custom tailored for exact fit and allows hood to open with mask in place
- Provides protection from nicks, stones, and scratches
- Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
- Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
- Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59M124 |
Covercraft |
$111.23 |
|
|
|
|
1985 Buick Somerset Regal Covercraft Car Bra
COVERCRAFT M SERIES FULL FRONT END MASK, VINYL, BLACK
Covercraft M Series custom front end masks are designed as one-piece units for ease of installation and maximum protection.
Features:- Made from heavy-gauge leather grain vinyl with soft padded protective backing
- Custom tailored for exact fit and allows hood to open with mask in place
- Provides protection from nicks, stones, and scratches
- Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
- Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
- Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59M120 |
Covercraft |
$111.23 |
|
|
|
|
1982-1984 Buick Regal Replacement Hood Latch
HOOD LATCH, STEEL, BLACK -- A high quality, OE replacement hood latch; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| C132301 |
Replacement |
$12.92 |
|
|
|
|
|
1982-1983 Buick Regal Replacement Hood Latch
HOOD LATCH, STEEL, BLACK -- A high quality, OE replacement hood latch; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| C132301 |
Replacement |
$12.92 |
|
|
|
|
1982-1987 Buick Regal Dorman Hood Latch
DORMAN HOOD LATCH, STEEL, BLACK, SOLD INDIVIDUALLY -- A high quality, OE replacement hood latch; Replaces OE number 15757371; With lifetime Dorman limited warranty.
| Part Number |
Brand |
Price |
|
| RB315100 |
Dorman |
$38.62 |
|
|
|
|
|
1997-2004 Buick Regal Lund - Lund Eclipse Hood Scoop
LUND ECLIPSE HOOD SCOOP, ABS PLASTIC, BLACK, SOLD INDIVIDUALLY -- 20.5 in. L x 13.5 in. W x 1.75 in. H; Large-sized; Made from durable, high impact molded ABS material; Features unique stylized scoop; Paintable to match factory color; Mounts using concealed adhesive acrylic foam tape; Easy no drill installation.
| Part Number |
Brand |
Price |
|
| L3280004 |
Lund |
$57.45 |
|
|
|
|
1997-2004 Buick Regal AC Delco Lift Support
AC DELCO HOOD STRUT ASSEMBLY, SOLD INDIVIDUALLY -- A high quality, OE replacement hood strut assembly; Replaces OE number 88947677; With lifetime AC Delco limited warranty.
| Part Number |
Brand |
Price |
|
| AC510374 |
AC Delco |
$30.49 |
|
|
|
