|
|
1992-1995 BMW 325i Replacement Hood
HOOD, GALVANIZED STEEL, PRIMERED
This high quality, OE replacement hood is supplied by a CAPA certified, QS9001, and ISO9001 manufacturing facility. Comes with emblem provision, holes for vent and windshield washer nozzle, and backed by 1-year, unlimited-mileage warranty.Replacement hoods are stamp die cut for a perfect fit for your vehicle; It went through 500 hours salt sprayed test to make sure it is corrosion resistant and Electro Deposit Primer coated for strong and durable protection.
| Part Number |
Brand |
Price |
 |
| B193 |
Replacement |
$237.34 |
|
|
|
|
1992-1995 BMW 325i Replacement Hood
HOOD, GALVANIZED STEEL, PRIMERED -- With emblem provision and windshield washer nozzle holes; A high quality, OE replacement hood; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| B163 |
Replacement |
$321.72 |
|
|
|
|
2001 BMW 325i Replacement Hood
HOOD, GALVANIZED STEEL, PRIMERED
This high quality, OE replacement hood is supplied by a CAPA certified, QS9001, and ISO9001 manufacturing facility. Comes with provisions for emblem and grille, vent holes, and backed by 1-year, unlimited-mileage warranty.Replacement hoods are stamp die cut for a perfect fit for your vehicle; It went through 500 hours salt sprayed test to make sure it is corrosion resistant and Electro Deposit Primer coated for strong and durable protection.
| Part Number |
Brand |
Price |
|
| B215 |
Replacement |
$218.68 |
|
|
|
|
|
2001 BMW 325i Replacement Hood
HOOD, GALVANIZED STEEL, PRIMERED
This high quality, OE replacement hood is supplied by a CAPA certified, QS9001, and ISO9001 manufacturing facility. Comes with provisions for emblem and grille, vent holes, and backed by 1-year, unlimited-mileage warranty.Replacement hoods are stamp die cut for a perfect fit for your vehicle; It went through 500 hours salt sprayed test to make sure it is corrosion resistant and Electro Deposit Primer coated for strong and durable protection.
| Part Number |
Brand |
Price |
|
| B215 |
Replacement |
$218.68 |
|
|
|
|
1987-1993 BMW 325i Replacement Hood
HOOD, GALVANIZED STEEL, PRIMERED -- With emblem provision and windshield washer nozzle holes; A high quality, OE replacement hood; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| B102 |
Replacement |
$200.26 |
|
|
|
|
2002-2005 BMW 325i Replacement Hood
HOOD, GALVANIZED STEEL, PRIMERED -- With provisions for emblem and grille; With vent holes; A high quality, OE replacement hood; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| B130106 |
Replacement |
$171.18 |
|
|
|
|
|
2002-2005 BMW 325i Replacement Hood
HOOD, GALVANIZED STEEL, PRIMERED -- With provisions for emblem and grille; With vent holes; A high quality, OE replacement hood; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| B130106 |
Replacement |
$171.18 |
|
|
|
|
2006 BMW 325i Replacement Hood
HOOD, GALVANIZED STEEL, PRIMERED -- With emblem provision; CAPA certified; A high quality, OE replacement hood; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| B130110Q |
Replacement |
$147.89 |
|
|
|
|
2002-2005 BMW 325i Replacement Hood
CAPA CERTIFIED HOOD, GALVANIZED STEEL, PRIMERED
This high quality, OE replacement hood is supplied by a CAPA certified, QS9001, and ISO9001 manufacturing facility. Comes with provisions for emblem and grille, vent holes, and backed by 1-year, unlimited-mileage warranty.CAPA Certified Replacement hoods are zinc oxide coated and 1000 hours salt sprayed tested to make sure they are corrosion resistant. They are stamp die cut for a perfect fit for your vehicle and Electro Deposit Primered coated for strong and durable protection.
| Part Number |
Brand |
Price |
|
| B130106Q |
Replacement |
$150.38 |
|
|
|
|
|
2002-2005 BMW 325i Replacement Hood
CAPA CERTIFIED HOOD, GALVANIZED STEEL, PRIMERED
This high quality, OE replacement hood is supplied by a CAPA certified, QS9001, and ISO9001 manufacturing facility. Comes with provisions for emblem and grille, vent holes, and backed by 1-year, unlimited-mileage warranty.CAPA Certified Replacement hoods are zinc oxide coated and 1000 hours salt sprayed tested to make sure they are corrosion resistant. They are stamp die cut for a perfect fit for your vehicle and Electro Deposit Primered coated for strong and durable protection.
| Part Number |
Brand |
Price |
|
| B130106Q |
Replacement |
$150.38 |
|
|
|
|
2006 BMW 325i Replacement Hood
HOOD, GALVANIZED STEEL, PRIMERED -- With provisions for emblem and grille; A high quality, OE replacement hood; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| B130110 |
Replacement |
$153.00 |
|
|
|
|
2001 BMW 325i Replacement Hood
HOOD, GALVANIZED STEEL, PRIMERED -- With provisions for emblem and grille; With vent holes; CAPA certified; A high quality, OE replacement hood; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| B215Q |
Replacement |
$243.85 |
|
|
|
|
|
2001 BMW 325i Replacement Hood
HOOD, GALVANIZED STEEL, PRIMERED -- With provisions for emblem and grille; With vent holes; CAPA certified; A high quality, OE replacement hood; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| B215Q |
Replacement |
$243.85 |
|
|
|
|
2006 BMW 325i Replacement Lift Support
HOOD LIFT SUPPORT, BLACK, SOLD INDIVIDUALLY -- A high quality, OE replacement hood lift support; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| B131703 |
Replacement |
$11.92 |
|
|
|
|
1992-1995 BMW 325i Stabilus Lift Support
STABILUS GAS-CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- Allows effortless opening and safe closing of the hood; Hood stays reliably secure in position and cannot slam shut when open; Absolutely maintenance-free; A high quality, OE replacement gas-charged hood lift support; Easy installation; Typically ships in 1-2 business days; With lifetime Stabilus limited warranty.
| Part Number |
Brand |
Price |
|
| S2SG302009 |
Stabilus |
$18.39 |
|
|
|
|
2006 BMW 325i Stabilus Lift Support
STABILUS GAS-CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- Allows effortless opening and safe closing of the hood; Hood stays reliably secure in position and cannot slam shut when open; Absolutely maintenance-free; A high quality, OE replacement gas-charged hood lift support; Easy installation; Typically ships in 1-2 business days; With lifetime Stabilus limited warranty.
| Part Number |
Brand |
Price |
|
| S2SG402058 |
Stabilus |
$13.52 |
|
|
|
|
|
1987-1991 BMW 325i Stabilus Lift Support
STABILUS GAS-CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- Allows effortless opening and safe closing of the hood; Hood stays reliably secure in position and cannot slam shut when open; Absolutely maintenance-free; A high quality, OE replacement gas-charged hood lift support; Easy installation; Typically ships in 1-2 business days; With lifetime Stabilus limited warranty.
| Part Number |
Brand |
Price |
|
| S2SG402001 |
Stabilus |
$14.91 |
|
|
|
|
|
1988 BMW 325i Stabilus Lift Support
STABILUS GAS-CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- Allows effortless opening and safe closing of the hood; Hood stays reliably secure in position and cannot slam shut when open; Absolutely maintenance-free; A high quality, OE replacement gas-charged hood lift support; Easy installation; Typically ships in 1-2 business days; With lifetime Stabilus limited warranty.
| Part Number |
Brand |
Price |
|
| S2SG402001 |
Stabilus |
$14.91 |
|
|
|
|
1992-1995 BMW 325i Strong Arm Lift Support
STRONG ARM GAS CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- 5.4 in. stroke length; 9 in. compressed length; 14.4 in. extended length; 0.59 in. body diameter; 0.24 in. shaft diameter; With blade for shaft and body connections; Made from a chromium-plated hardened steel rod and glossy finish heavy gauge steel body; Designed with self-cleaning orifice that keeps the piston area free of contaminants, reduces clogging, and prevents lock up; Features a sealing system that uses a Triple-Lobe rubber seal and rubber O-ring piston seal that withstand high pressure, vibration, side-loading, and misalignment; Provided with nitrogen gas charge up to 2500 psi that does not affect any of the internal components and glycol fluid lubricant to slow down the movement prior to full open; Typically ships in 1-2 business days; With 2-year Strong Arm limited warranty.
| Part Number |
Brand |
Price |
|
| STA4637 |
Strong Arm |
$26.55 |
|
|
|
|
1987-2006 BMW 325i Strong Arm Lift Support
STRONG ARM GAS CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- 4.1 in. stroke length; 8.34 in. compressed length; 12.44 in. extended length; 0.75 in. body diameter; 0.31 in. shaft diameter; With steel ball socket for shaft and body connections; Made from a chromium-plated hardened steel rod and glossy finish heavy gauge steel body; Designed with self-cleaning orifice that keeps the piston area free of contaminants, reduces clogging, and prevents lock up; Features a sealing system that uses a Triple-Lobe rubber seal and rubber O-ring piston seal that withstand high pressure, vibration, side-loading, and misalignment; Provided with nitrogen gas charge up to 2500 psi that does not affect any of the internal components and glycol fluid lubricant to slow down the movement prior to full open; Typically ships in 1-2 business days; With 2-year Strong Arm limited warranty.
| Part Number |
Brand |
Price |
|
| STA4115 |
Strong Arm |
$15.38 |
|
|
|
|
|
2001-2003 BMW 325i Strong Arm Lift Support
STRONG ARM GAS CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- 4.1 in. stroke length; 8.34 in. compressed length; 12.44 in. extended length; 0.75 in. body diameter; 0.31 in. shaft diameter; With steel ball socket for shaft and body connections; Made from a chromium-plated hardened steel rod and glossy finish heavy gauge steel body; Designed with self-cleaning orifice that keeps the piston area free of contaminants, reduces clogging, and prevents lock up; Features a sealing system that uses a Triple-Lobe rubber seal and rubber O-ring piston seal that withstand high pressure, vibration, side-loading, and misalignment; Provided with nitrogen gas charge up to 2500 psi that does not affect any of the internal components and glycol fluid lubricant to slow down the movement prior to full open; Typically ships in 1-2 business days; With 2-year Strong Arm limited warranty.
| Part Number |
Brand |
Price |
|
| STA4115 |
Strong Arm |
$15.38 |
|
|
|
|
1987-1991 BMW 325i Strong Arm Lift Support
STRONG ARM GAS CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- 3.1 in. stroke length; 6.9 in. compressed length; 10 in. extended length; 0.59 in. body diameter; 0.24 in. shaft diameter; With blade for shaft and body connections; Made from a chromium-plated hardened steel rod and glossy finish heavy gauge steel body; Designed with self-cleaning orifice that keeps the piston area free of contaminants, reduces clogging, and prevents lock up; Features a sealing system that uses a Triple-Lobe rubber seal and rubber O-ring piston seal that withstand high pressure, vibration, side-loading, and misalignment; Provided with nitrogen gas charge up to 2500 psi that does not affect any of the internal components and glycol fluid lubricant to slow down the movement prior to full open; Typically ships in 1-2 business days; With 2-year Strong Arm limited warranty.
| Part Number |
Brand |
Price |
|
| STA4470 |
Strong Arm |
$10.82 |
|
|
|
|
1987-1991 BMW 325i Monroe Lift Support
MONROE MAX-LIFT GAS-CHARGED HOOD LIFT SUPPORT, SOLD INDIVIDUALLY -- 6.3 in. compressed length; 10 in. extended length; 3.7 in. travel; Includes installation instructions; Made of steel body pressure cylinder and nitro-carbonized rod for exceptional corrosion resistance and durability; Features plastic rod guide to reduce potential rod abrasion, main seal to provide positive closure for high pressure gas, and stop collar and limiting groove to assure precise extended length; High strength piston assembly with leak-proof seal helps prevent fluid leakage around the piston to allow fluid to pass efficiently through the piston valving components thus providing controlled lift and consistent performance; Exact replacement for worn out original unit.
| Part Number |
Brand |
Price |
|
| TS901339 |
Monroe |
$10.71 |
|
|
|
|
2006 BMW 325i Replacement Hood Molding
HOOD MOLDING, PLASTIC, CHROME -- A high quality, direct fit OE replacement hood molding; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| B132101 |
Replacement |
$6.02 |
|
|
|
|
1993-1995 BMW 325i Covercraft - Covercraft MM Car Bra
COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE
Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.
Features:- Made from heavy-gauge leather grain vinyl with soft padded protective backing
- Custom tailored for exact fit and allows hood to open with mask in place
- Provides protection from nicks, stones, and scratches
- Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
- Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
- Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59MM42038 |
Covercraft |
$93.66 |
|
|
|
|
|
1992 BMW 325i Covercraft - Covercraft MM Car Bra
COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE
Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.
Features:- Made from heavy-gauge leather grain vinyl with soft padded protective backing
- Custom tailored for exact fit and allows hood to open with mask in place
- Provides protection from nicks, stones, and scratches
- Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
- Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
- Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59MM42038 |
Covercraft |
$93.66 |
|
|
|
|
1993-1995 BMW 325i Covercraft Car Bra
COVERCRAFT MH SERIES DEFLECTOR-PROTECTOR HOOD SHIELD, VINYL, BLACK
Covercraft MD Series Deflector-Protector is a hood protector with a built-in bug deflector. Unlike hard plastic bug deflectors, Deflector-Protector can be removed in minutes and stored in your vehicle's trunk or behind the seat.
Features:- Made of tough vinyl material that has a soft fleeced backing
- The top of the hood curve is a styrene insert-reinforced bug deflector that creates a swirling wind to divert most bugs, dirt, and debris away from the windshield
- Custom-tailored to protect the front of the hood of most cars, vans, and pickups
- Can be used in any weather, including sun, snow or rain
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59MH038 |
Covercraft |
$43.75 |
|
|
|
|
|
1992 BMW 325i Covercraft Car Bra
COVERCRAFT MH SERIES DEFLECTOR-PROTECTOR HOOD SHIELD, VINYL, BLACK
Covercraft MD Series Deflector-Protector is a hood protector with a built-in bug deflector. Unlike hard plastic bug deflectors, Deflector-Protector can be removed in minutes and stored in your vehicle's trunk or behind the seat.
Features:- Made of tough vinyl material that has a soft fleeced backing
- The top of the hood curve is a styrene insert-reinforced bug deflector that creates a swirling wind to divert most bugs, dirt, and debris away from the windshield
- Custom-tailored to protect the front of the hood of most cars, vans, and pickups
- Can be used in any weather, including sun, snow or rain
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59MH038 |
Covercraft |
$43.75 |
|
|
|
|
2001 BMW 325i Covercraft Car Bra
COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE
Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.
Features:- Made from heavy-gauge leather grain vinyl with soft padded protective backing
- Custom tailored for exact fit and allows hood to open with mask in place
- Provides protection from nicks, stones, and scratches
- Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
- Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
- Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59MM42063 |
Covercraft |
$93.66 |
|
|
|
|
1987-1992 BMW 325i Covercraft Car Bra
COVERCRAFT MH SERIES DEFLECTOR-PROTECTOR HOOD SHIELD, VINYL, BLACK
Covercraft MD Series Deflector-Protector is a hood protector with a built-in bug deflector. Unlike hard plastic bug deflectors, Deflector-Protector can be removed in minutes and stored in your vehicle's trunk or behind the seat.
Features:- Made of tough vinyl material that has a soft fleeced backing
- The top of the hood curve is a styrene insert-reinforced bug deflector that creates a swirling wind to divert most bugs, dirt, and debris away from the windshield
- Custom-tailored to protect the front of the hood of most cars, vans, and pickups
- Can be used in any weather, including sun, snow or rain
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59MH044 |
Covercraft |
$43.75 |
|
|
|
|
1990-1992 BMW 325i Covercraft Car Bra
COVERCRAFT MM SERIES CUSTOM FRONT END MASK, VINYL, BLACK, 2-PIECE
Covercraft MM Series custom front end mask will give you maximum protection that you can't beat. It covers the bumper area and the leading portion of the hood area.
Features:- Made from heavy-gauge leather grain vinyl with soft padded protective backing
- Custom tailored for exact fit and allows hood to open with mask in place
- Provides protection from nicks, stones, and scratches
- Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
- Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
- Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59MM42044 |
Covercraft |
$93.66 |
|
|
|
|
1987-1989 BMW 325i Covercraft Car Bra
COVERCRAFT M SERIES FULL FRONT END MASK, VINYL, BLACK
Covercraft M Series custom front end masks are designed as one-piece units for ease of installation and maximum protection.
Features:- Made from heavy-gauge leather grain vinyl with soft padded protective backing
- Custom tailored for exact fit and allows hood to open with mask in place
- Provides protection from nicks, stones, and scratches
- Designed with protective air intake screens, covered aluminum adjustment tabs, and reinforced air foils that prevent flapping and lift
- Utilizes a micro-perforated finish that permits proper moisture control while allowing the mask to breathe
- Comes with overlapped finished seams with edges that are covered with soft and non-abrasive felt-rimmed bindings for strength and durability
- Easy no-drill installation
Notes:- This product will be shipped out from our facility 3-4 weeks after the order has been confirmed
| Part Number |
Brand |
Price |
|
| C59M39 |
Covercraft |
$111.23 |
|
|
|
|
1987-1993 BMW 325i Gemo Hood Cable
without Handle
| Part Number |
Brand |
Price |
|
| W0133-1636636 |
Gemo |
$27.95 |
|
|
|
|
1992-1995 BMW 325i OES Genuine Hood Bumper
| Part Number |
Brand |
Price |
|
| W0133-1636898 |
OES Genuine |
$16.13 |
|
|
|
|
2001-2005 BMW 325i OES Genuine Hood Release Handle
| Part Number |
Brand |
Price |
|
| W0133-1909803 |
OES Genuine |
$7.95 |
|
|
|
|
1992-1995 BMW 325i OES Genuine Hood Release Handle
| Part Number |
Brand |
Price |
|
| W0133-1909780 |
OES Genuine |
$4.95 |
|
|
|
|
2006 BMW 325i APS Hood Grille
APS ALUMINUM BILLET HOOD GRILLE, VERTICAL BAR, 2 PIECES -- Constructed Of Highly Polished 6060-T6 Billet Aluminum For Ultimate Corrosive Resistance, Adds Distinctive Styling For That Custom Look, Provides A Precise Fit, Installs Over Existing Grille, Easy Installation, No Drilling, Cutting Or Removal Of Any Grille Component Needed, Includes Complete Hardware And Mounting Instructions
| Part Number |
Brand |
Price |
|
| W65526V |
APS |
$91.73 |
|
|
|
|
2001-2005 BMW 325i APA/URO Parts Lift Support
APA/URO PARTS HOOD SHOCK LIFT SUPPORT, SOLD INDIVIDUALLY -- Meets or exceeds OE standards for fitment, function, durability, and design; A high quality, OE replacement hood shock lift support; With 2-year APA/URO Parts limited warranty.
| Part Number |
Brand |
Price |
|
| URO51238202688 |
APA/URO Parts |
$17.03 |
|
|
|
|
|
1995 BMW 325i APA/URO Parts Lift Support
APA/URO PARTS HOOD DAMPER LIFT SUPPORT, SOLD INDIVIDUALLY -- Meets or exceeds OE standards for fitment, function, durability, and design; A high quality, OE replacement hood damper lift support; With 2-year APA/URO Parts limited warranty.
| Part Number |
Brand |
Price |
|
| URO51231960852 |
APA/URO Parts |
$14.29 |
|
|
|
|
|
1994 BMW 325i APA/URO Parts Lift Support
APA/URO PARTS HOOD DAMPER LIFT SUPPORT, SOLD INDIVIDUALLY -- Meets or exceeds OE standards for fitment, function, durability, and design; A high quality, OE replacement hood damper lift support; With 2-year APA/URO Parts limited warranty.
| Part Number |
Brand |
Price |
|
| URO51231960852 |
APA/URO Parts |
$14.29 |
|
|
|
|
|
1992 BMW 325i APA/URO Parts Lift Support
APA/URO PARTS HOOD DAMPER LIFT SUPPORT, SOLD INDIVIDUALLY -- Meets or exceeds OE standards for fitment, function, durability, and design; A high quality, OE replacement hood damper lift support; With 2-year APA/URO Parts limited warranty.
| Part Number |
Brand |
Price |
|
| URO51231906286 |
APA/URO Parts |
$9.51 |
|
|
|
|
|
1987-1990 BMW 325i APA/URO Parts Lift Support
APA/URO PARTS HOOD DAMPER LIFT SUPPORT, SOLD INDIVIDUALLY -- Meets or exceeds OE standards for fitment, function, durability, and design; A high quality, OE replacement hood damper lift support; With 2-year APA/URO Parts limited warranty.
| Part Number |
Brand |
Price |
|
| URO51231906286 |
APA/URO Parts |
$9.51 |
|
|
|
