|
|
1965-1967 Chevrolet P10 Series Coverking - Coverking Custom Floor Mats
COVERKING CUSTOM FLOOR MAT
- Made of 70 oz. luxurious high density nylon carpet with stain and wear resistant agents added to the fiber to provide complete protection
- Designed with a thick, non-slip nibbed backing to effectively prevent slipping
- Fits better than factory mats
- Made in the USA for guaranteed quality craftsmanship and durability
Coverking Custom Floor Mats are more than just simple carpet cut to fit your vehicle's floor area. They protect factory original mats or original floor carpet from daily wear and tear, as well as permanent discoloration from dirt and mud. CAD designed, these high quality floor mats provide a consistent, perfect fit.
| Part Number |
Brand |
Price |
 |
| C37CFMAX17CH9004 |
Coverking |
$124.67 |
|
|
|
|
1965-1967 Chevrolet P10 Series Coverking - Coverking Custom Floor Mats
COVERKING CUSTOM FLOOR MAT
- Made of 22 oz. premium high density nylon carpet with stain and wear resistant agents added to the fiber to provide complete protection
- Designed with a thick, non-slip nibbed backing to effectively prevent slipping
- Fits better than factory mats
- Made in the USA for guaranteed quality craftsmanship and durability
Coverking Premium Custom Floor Mats are more than just simple carpet cut to fit your vehicle's floor area. They protect factory original mats or original floor carpet from daily wear and tear, as well as permanent discoloration from dirt and mud. CAD designed, these high quality floor mats provide a consistent, perfect fit.
| Part Number |
Brand |
Price |
|
| C37CFMAL17CH9004 |
Coverking |
$44.55 |
|
|
|
|
1965-1967 Chevrolet P10 Series Coverking - Coverking Custom Floor Mats
COVERKING CUSTOM FLOOR MATS, NYLON CARPET, LIGHT OAK, SET OF 2
Coverking Custom Floor Mats are more than just simple carpet cut to fit your vehicle's floor area. They protect factory original mats or original floor carpet from daily wear and tear, as well as permanent discoloration from dirt and mud. CAD designed, these high quality floor mats provide a consistent, perfect fit.
Features:- Made of 40 oz. premium high density nylon carpet with stain and wear resistant agents added to the fiber to provide complete protection
- Designed with a thick, non-slip nibbed backing to effectively prevent slipping
- Fits better than factory mats
- Made in the USA
| Part Number |
Brand |
Price |
|
| C37CFMAM17CH9004 |
Coverking |
$74.59 |
|
|
|
|
|
1966-1967 Chevrolet P10 Series Standard Brake Light Switch
STANDARD STOPLIGHT SWITCHStandard Brake Light switches are constructed using brass or high-impact composite housings as specified for optimum performance and durability. It has copper alloy conductors for guaranteed superior electrical conductivity with low resistive losses. Standard Engine Management is a leading producer and distributor of a complete line of engine management related products which include ignition and emission parts, on-board computers, ignition wires, battery cables, and fuel system parts. Their products are output of intensive research and development to guarantee that it will meet technician's needs. Features: - Meets or exceeds OE specifications
- Specially designed spring and contact arrangement reduces arcing for long service life
- 100% tested to check both mechanical and electrical switching performance
- Designed for strength using high-quality materials to match the needs of service professionals
- No Connector
- 1 Electrical Connector
- 4 Male Blade-Type Terminals
| Part Number |
Brand |
Price |
|
| SISLS159 |
Standard |
$16.08 |
|
|
|
|
|
1967 Chevrolet P10 Series Standard Brake Light Switch
STANDARD STOPLIGHT SWITCHStandard Brake Light switches are constructed using brass or high-impact composite housings as specified for optimum performance and durability. It has copper alloy conductors for guaranteed superior electrical conductivity with low resistive losses. Standard Engine Management is a leading producer and distributor of a complete line of engine management related products which include ignition and emission parts, on-board computers, ignition wires, battery cables, and fuel system parts. Their products are output of intensive research and development to guarantee that it will meet technician's needs. Features: - Meets or exceeds OE specifications
- Specially designed spring and contact arrangement reduces arcing for long service life
- 100% tested to check both mechanical and electrical switching performance
- Designed for strength using high-quality materials to match the needs of service professionals
- Female Connector
- 1 Electrical Connector
- 2 Male Stud-Type Terminals
| Part Number |
Brand |
Price |
|
| SISLS65 |
Standard |
$18.00 |
|
|
|
|
|
1966 Chevrolet P10 Series Standard Brake Light Switch
STANDARD STOPLIGHT SWITCHStandard Brake Light switches are constructed using brass or high-impact composite housings as specified for optimum performance and durability. It has copper alloy conductors for guaranteed superior electrical conductivity with low resistive losses. Standard Engine Management is a leading producer and distributor of a complete line of engine management related products which include ignition and emission parts, on-board computers, ignition wires, battery cables, and fuel system parts. Their products are output of intensive research and development to guarantee that it will meet technician's needs. Features: - Meets or exceeds OE specifications
- Specially designed spring and contact arrangement reduces arcing for long service life
- 100% tested to check both mechanical and electrical switching performance
- Designed for strength using high-quality materials to match the needs of service professionals
- Male Connector
- 1 Electrical Connector
- 2 Male Stud-Type Terminals
| Part Number |
Brand |
Price |
|
| SISLS43 |
Standard |
$19.00 |
|
|
|
|
|
1963-1965 Chevrolet P10 Series Standard Brake Light Switch
STANDARD STOPLIGHT SWITCHStandard Brake Light switches are constructed using brass or high-impact composite housings as specified for optimum performance and durability. It has copper alloy conductors for guaranteed superior electrical conductivity with low resistive losses. Standard Engine Management is a leading producer and distributor of a complete line of engine management related products which include ignition and emission parts, on-board computers, ignition wires, battery cables, and fuel system parts. Their products are output of intensive research and development to guarantee that it will meet technician's needs. Features: - Meets or exceeds OE specifications
- Specially designed spring and contact arrangement reduces arcing for long service life
- 100% tested to check both mechanical and electrical switching performance
- Designed for strength using high-quality materials to match the needs of service professionals
- Male Connector
- 1 Electrical Connector
- 2 Male Stud-Type Terminals
| Part Number |
Brand |
Price |
|
| SISLS43 |
Standard |
$19.00 |
|
|
|
|
1966-1967 Chevrolet P10 Series AC Delco Brake Light Switch
AC DELCO BRAKE LIGHT SWITCH -- Features high standard engineering and extreme condition testing to ensure quality, dependability, and efficiency; A high quality, OE replacement brake light switch; Replaces OE number 1261219; With 1-year or 12,000-mile AC Delco limited warranty.
| Part Number |
Brand |
Price |
|
| ACD885 |
AC Delco |
$7.74 |
|
|
|
|
1966-1967 Chevrolet P10 Series AC Delco Brake Light Switch
AC DELCO BRAKE LIGHT SWITCH -- Features high standard engineering and extreme condition testing to ensure quality, dependability, and efficiency; A high quality, OE replacement brake light switch; Replaces OE number 19107006; With 1-year or 12,000-mile AC Delco limited warranty.
| Part Number |
Brand |
Price |
|
| ACD866C |
AC Delco |
$24.53 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 5500 SERIES HID DRIVING LIGHT, ROUND, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 9 to 32 volts; 2.9 ampere draw; 3,500 lumens; 5,000 K; 5.5 x 6.56 x 5.25 in.; DOT approved; Spot beam; Includes 35 watts HID bulb with 2500-hour lifespan, weatherproof deutsch connector with wire harness, internal ballast, and starter; With adjustable single stud mount base, clear borosilicate hardened glass lens, and an IP-65 rated, hi-impact, black nylon housing; Features a parabolic aluminized reflector for 30 percent more light output than conventional reflectors; Easy installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXHID-5502 |
Vision X |
$219.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 10 WATT SOLSTICE SOLO LED DRIVING LIGHT POD, ROUND, CLEAR PLASTIC LENS, SOLD INDIVIDUALLY -- 9 to 50 volts; 10 watts; 0.75 ampere draw; 900 lumens; 3.25 x 2.44 x 2.05 in.; DOT approved; Wide 35 degree beam; Includes one 88 percent 10-watt LEDs with 50,000-hour lifespan, weatherproof deutsch connector with plug-and-play harness, omni-link mounts, and adjustable trunnion bracket mount; With clear polycarbonate lens, and an IP-68 rated, black die-cast aluminum housing; Designed and optimized for cold weather conditions, and for low power consumption; Features vertical fins to maximize heat dissipation; Easy 2-wire installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXXIL-S1101 |
Vision X |
$119.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 5510 SERIES HALOGEN DRIVING LIGHT, ROUND, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 12 volts; 8.33 ampere draw; 1,800 lumens; 5,000 K; 5.25 x 5.5 x 6.56 in.; DOT approved; Spot beam; Includes 100 watts tungsten halogen-hybrid bulb with 2500-hour lifespan, weatherproof deutsch connector with wire harness, internal ballast, and starter; With adjustable single stud mount base, clear borosilicate hardened glass lens, parabolic aluminized reflector for 30 percent more light output than conventional reflectors, and an IP-65 rated, hi-impact, black nylon housing; Features a long-life pure tungsten filament, and a tungsten halogen-hybrid light with an oversized glass globe for better heat dissipation; Upgradable to HID and is 100 percent compatible with HID accessories; Easy 2-wire installation; With 1-year Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXVX-5512 |
Vision X |
$35.30 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 4410 SERIES HALOGEN DRIVING LIGHT, SQUARE, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 12 volts; 8.33 ampere draw; 1,800 lumens; 5 x 5.75 x 4.75 in.; DOT approved; Euro beam; Includes 100 watts halogen bulb with 250-hour lifespan; With adjustable single stud mount base, clear borosilicate hardened glass lens, parabolic aluminized reflector for 30 percent more light output than conventional reflectors, and an IP-65 rated, hi-impact, black nylon housing; Features a long-life pure tungsten filament, and a tungsten halogen-hybrid light with an oversized glass globe for better heat dissipation; Upgradable to HID and is 100 percent compatible with HID accessories; Easy 2-wire installation; With 1-year Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXVX-4410 |
Vision X |
$27.15 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 10 WATT SOLSTICE SOLO LED DRIVING LIGHT POD, ROUND, CLEAR PLASTIC LENS, SOLD INDIVIDUALLY -- 9 to 50 volts; 10 watts; 0.75 ampere draw; 900 lumens; 3.25 x 2.44 x 2.05 in.; DOT approved; Medium 15 degree beam; Includes one 88 percent 10-watt LEDs with 50,000-hour lifespan, weatherproof deutsch connector with plug-and-play harness, omni-link mounts, and adjustable trunnion bracket mount; With clear polycarbonate lens, and an IP-68 rated, black die-cast aluminum housing; Designed and optimized for cold weather conditions, and for low power consumption; Features vertical fins to maximize heat dissipation; Easy 2-wire installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXXIL-S1102 |
Vision X |
$119.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 4410 SERIES HALOGEN DRIVING LIGHT, SQUARE, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 12 volts; 8.33 ampere draw; 1,800 lumens; 5 x 5.75 x 4.75 in.; DOT approved; Flood beam; Includes 100 watts halogen bulb with 250-hour lifespan; With adjustable single stud mount base, clear borosilicate hardened glass lens, parabolic aluminized reflector for 30 percent more light output than conventional reflectors, and an IP-65 rated, hi-impact, black nylon housing; Features a long-life pure tungsten filament, and a tungsten halogen-hybrid light with an oversized glass globe for better heat dissipation; Upgradable to HID and is 100 percent compatible with HID accessories; Easy 2-wire installation; With 1-year Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXVX-4411 |
Vision X |
$27.15 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X XMITTER LED DRIVING LIGHT BAR, RECTANGULAR, CLEAR PLASTIC LENS, SOLD INDIVIDUALLY -- 9 to 32 volts; 120 watts; 10 ampere draw at 12 volts; 7,200 lumens; 21.70 in.; DOT approved; Euro beam; Includes forty 3-watts LED lights with 100 percent acrylic lens and 50,000-hour lifespan, and weatherproof deutsch connector with plug-and-play harness; With clear polycarbonate lens, stainless steel U bracket stud mount, and rubber shock isolator for vibration control; Made with die-cast aluminum end caps and an IP-67 rated, black, extruded 6061 aluminum housing; Features a patent pending integrated mounting system, allowing each mount to slide along the lower extrusion to match any existing mounting holes, and for horizontal and vertical adjustment; Tubing or roll cage mounts sold separately in pairs; Easy 2-wire installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXXIL-400 |
Vision X |
$699.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 4410 SERIES HALOGEN DRIVING LIGHT, SQUARE, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 12 volts; 8.33 ampere draw; 1,800 lumens; 5 x 5.75 x 4.75 in.; DOT approved; Spot beam; Includes 100 watts halogen bulb with 250-hour lifespan; With adjustable single stud mount base, clear borosilicate hardened glass lens, parabolic aluminized reflector for 30 percent more light output than conventional reflectors, and an IP-65 rated, hi-impact, black nylon housing; Features a long-life pure tungsten filament, and a tungsten halogen-hybrid light with an oversized glass globe for better heat dissipation; Upgradable to HID and is 100 percent compatible with HID accessories; Easy 2-wire installation; With 1-year Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXVX-4412 |
Vision X |
$27.15 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 6500 SERIES HID DRIVING LIGHT, ROUND, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 9 to 32 volts; 4.17 ampere draw; 5,000 lumens; 5,000 K; 6.7 x 7 x 6 in.; DOT approved; Flood beam; Includes 50 watts HID bulb with 2500-hour lifespan, black street legal cover, weatherproof deutsch connector with plug-and-play harness, internal ballast, and starter; With clear borosilicate hardened glass lens, knurled aiming knob for a 15 degree adjustment, and an IP-65 rated, chrome finished die-cast aluminum housing; Features a parabolic aluminized reflector for 30 percent more light output than conventional reflectors; Easy installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXHID-6551C |
Vision X |
$499.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X XMITTER LED DRIVING LIGHT BAR, RECTANGULAR, CLEAR PLASTIC LENS, SOLD INDIVIDUALLY -- 9 to 32 volts; 180 watts; 15 ampere draw at 12 volts; 10,800 lumens; 31.80 in.; DOT approved; Euro beam; Includes sixty 3-watts LED lights with 100 percent acrylic lens and 50,000-hour lifespan, and weatherproof deutsch connector with plug-and-play harness; With clear polycarbonate lens, stainless steel U bracket stud mount, and rubber shock isolator for vibration control; Made with die-cast aluminum end caps and an IP-67 rated, black, extruded 6061 aluminum housing; Features a patent pending integrated mounting system, allowing each mount to slide along the lower extrusion to match any existing mounting holes, and for horizontal and vertical adjustment; Tubing or roll cage mounts sold separately in pairs; Easy 2-wire installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXXIL-600 |
Vision X |
$999.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 6500 SERIES HID DRIVING LIGHT, ROUND, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 9 to 32 volts; 4.17 ampere draw; 5,000 lumens; 5,000 K; 6.7 x 7 x 6 in.; DOT approved; Euro beam; Includes 50 watts HID bulb with 2500-hour lifespan, black street legal cover, weatherproof deutsch connector with plug-and-play harness, internal ballast, and starter; With clear borosilicate hardened glass lens, knurled aiming knob for a 15 degree adjustment, and an IP-65 rated, black die-cast aluminum housing; Features a parabolic aluminized reflector for 30 percent more light output than conventional reflectors; Easy installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXHID-6550 |
Vision X |
$399.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 4610 SERIES HALOGEN DRIVING LIGHT, OVAL, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 9 to 32 volts; 8.3 ampere draw; 1,800 lumens; 5,000 K; 5.5 x 6.69 x 6.38 in.; DOT approved; Flood beam; Includes 100 watts tungsten halogen-hybrid bulb with 2500-hour lifespan, weatherproof deutsch connector with wire harness, internal ballast, and starter; With adjustable single stud mount base, clear borosilicate hardened glass lens, parabolic aluminized reflector for 30 percent more light output than conventional reflectors, and an IP-65 rated, hi-impact, black nylon housing; Features a long-life pure tungsten filament, and a tungsten halogen-hybrid light with an oversized glass globe for better heat dissipation; Easy installation; With 1-year Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXVX-4611 |
Vision X |
$35.30 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 60 WATT SOLSTICE SERIES LED DRIVING LIGHT, ROUND, CLEAR PLASTIC LENS, SOLD INDIVIDUALLY -- 9 to 50 volts; 60 watts; 5 ampere draw; 4,800 lumens; 3.5 x 4 x 6.75 in.; 6 in. diameter; DOT approved; Wide 35 degree beam; Includes six 88 percent 10-watt LEDs with 50,000-hour lifespan, weatherproof deutsch connector with plug-and-play harness, and adjustable trunnion bracket mount; With clear polycarbonate lens, and an IP-68 rated, black die-cast aluminum housing; Designed and optimized for cold weather conditions, and for low power consumption; Features vertical fins to maximize heat dissipation; Easy 2-wire installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXXIL-S6101 |
Vision X |
$599.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 4400 SERIES HID DRIVING LIGHT, SQUARE, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 9 to 32 volts; 2.9 ampere draw; 3,500 lumens; 5,000 K; 4.75 x 5.75 x 5 in.; DOT approved; Euro beam; Includes 35 watts HID bulb with 2500-hour lifespan, weatherproof deutsch connector with wire harness, internal ballast, and starter; With adjustable single stud mount base, clear borosilicate hardened glass lens, and an IP-65 rated, hi-impact, black nylon housing; Features a parabolic aluminized reflector for 30 percent more light output than conventional reflectors; Easy installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXHID-4400 |
Vision X |
$199.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 6500 SERIES HID DRIVING LIGHT, ROUND, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 9 to 32 volts; 4.17 ampere draw; 5,000 lumens; 5,000 K; 6.7 x 7 x 6 in.; DOT approved; Spot beam; Includes 50 watts HID bulb with 2500-hour lifespan, black street legal cover, weatherproof deutsch connector with plug-and-play harness, internal ballast, and starter; With clear borosilicate hardened glass lens, knurled aiming knob for a 15 degree adjustment, and an IP-65 rated, black die-cast aluminum housing; Features a parabolic aluminized reflector for 30 percent more light output than conventional reflectors; Easy installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXHID-6552 |
Vision X |
$399.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 5710 SERIES HALOGEN DRIVING LIGHT, SQUARE, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 12 volts; 8.3 ampere draw; 1,800 lumens; 7 x 5.5 x 4.75 in.; DOT approved; Flood beam; Includes 100 watts halogen bulb with 400-hour lifespan, black street legal cover, and weatherproof deutsch connector with plug-and-play harness; With clear borosilicate hardened glass lens, parabolic aluminized reflector for 30 percent more light output than conventional reflectors, knurled aiming knob for a 15 degree adjustment, and an IP-65 rated, hi-impact, black nylon housing; Features a long-life pure tungsten filament, and a tungsten halogen-hybrid light with an oversized glass globe for better heat dissipation; Upgradable to HID and is 100 percent compatible with HID accessories; Easy 2-wire installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXVX-5711NH |
Vision X |
$80.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X XMITTER LED DRIVING LIGHT BAR, RECTANGULAR, CLEAR PLASTIC LENS, SOLD INDIVIDUALLY -- 9 to 32 volts; 24 watts; 2 ampere draw at 12 volts; 1,440 lumens; 5.8 in.; DOT approved; Euro beam; Includes eight 3-watts LED lights with 100 percent acrylic lens and 50,000-hour lifespan, and weatherproof deutsch connector with plug-and-play harness; With clear polycarbonate lens, stainless steel U bracket stud mount, and rubber shock isolator for vibration control; Made with die-cast aluminum end caps and an IP-67 rated, black, extruded 6061 aluminum housing; Features a patent pending integrated mounting system, allowing each mount to slide along the lower extrusion to match any existing mounting holes, and for horizontal and vertical adjustment; Tubing or roll cage mounts sold separately in pairs; Easy 2-wire installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXXIL-80 |
Vision X |
$219.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 5700 SERIES HID DRIVING LIGHT, RECTANGULAR, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 9 to 32 volts; 4.17 ampere draw; 5,000 lumens; 5,000 K; 7 x 5.5 x 4.75 in.; DOT approved; Euro beam; Includes 50 watts HID bulb with 2500-hour lifespan, black street legal cover, weatherproof deutsch connector with plug-and-play harness, internal ballast, and starter; With clear borosilicate hardened glass lens, knurled aiming knob for a 15 degree adjustment, and an IP-65 rated, black die-cast aluminum housing; Features a parabolic aluminized reflector for 30 percent more light output than conventional reflectors; Easy installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXHID-5750 |
Vision X |
$399.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X XMITTER LED DRIVING LIGHT BAR, RECTANGULAR, CLEAR PLASTIC LENS, SOLD INDIVIDUALLY -- 9 to 32 volts; 240 watts; 20 ampere draw at 12 volts; 14,400 lumens; 41.8 in.; DOT approved; Euro beam; Includes eighty 3-watts LED lights with 100 percent acrylic lens and 50,000-hour lifespan, and weatherproof deutsch connector with plug-and-play harness; With clear polycarbonate lens, stainless steel U bracket stud mount, and rubber shock isolator for vibration control; Made with die-cast aluminum end caps and an IP-67 rated, black, extruded 6061 aluminum housing; Features a patent pending integrated mounting system, allowing each mount to slide along the lower extrusion to match any existing mounting holes, and for horizontal and vertical adjustment; Tubing or roll cage mounts sold separately in pairs; Easy 2-wire installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXXIL-800 |
Vision X |
$1,299.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 5510 SERIES HALOGEN DRIVING LIGHT, OVAL, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 12 volts; 8.33 ampere draw; 1,800 lumens; 5,000 K; 5.25 x 5.5 x 6.56 in.; DOT approved; Flood beam; Includes 100 watts tungsten halogen-hybrid bulb with 2500-hour lifespan, weatherproof deutsch connector with wire harness, internal ballast, and starter; With adjustable single stud mount base, clear borosilicate hardened glass lens, parabolic aluminized reflector for 30 percent more light output than conventional reflectors, and an IP-65 rated, hi-impact, black nylon housing; Features a long-life pure tungsten filament, and a tungsten halogen-hybrid light with an oversized glass globe for better heat dissipation; Upgradable to HID and is 100 percent compatible with HID accessories; Easy 2-wire installation; With 1-year Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXVX-5511 |
Vision X |
$35.30 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 6500 SERIES HID DRIVING LIGHT, ROUND, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 9 to 32 volts; 4.17 ampere draw; 5,000 lumens; 5,000 K; 6.7 x 7 x 6 in.; DOT approved; Euro beam; Includes 50 watts HID bulb with 2500-hour lifespan, black street legal cover, weatherproof deutsch connector with plug-and-play harness, internal ballast, and starter; With clear borosilicate hardened glass lens, knurled aiming knob for a 15 degree adjustment, and an IP-65 rated, chrome finished, die-cast aluminum housing; Features a parabolic aluminized reflector for 30 percent more light output than conventional reflectors; Easy installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXHID-6550C |
Vision X |
$499.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 4410 SERIES HALOGEN DRIVING LIGHT, SQUARE, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 12 volts; 8.33 ampere draw; 1,800 lumens; 5 x 5.75 x 4.75 in.; DOT approved; Flood beam; Includes 100 watts halogen bulb with 250-hour lifespan; With adjustable single stud mount base, clear borosilicate hardened glass lens, parabolic aluminized reflector for 30 percent more light output than conventional reflectors, and an IP-65 rated, hi-impact, black nylon housing; Features a long-life pure tungsten filament, and a tungsten halogen-hybrid light with an oversized glass globe for better heat dissipation; Upgradable to HID and is 100 percent compatible with HID accessories; Easy 2-wire installation; With 1-year Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXVX-4401 |
Vision X |
$27.15 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 6500 SERIES HID DRIVING LIGHT, ROUND, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 9 to 32 volts; 2.92 ampere draw; 3,500 lumens; 5,000 K; 6.7 x 7 x 6 in.; DOT approved; Spot beam; Includes 35 watts HID bulb with 2500-hour lifespan, black street legal cover, weatherproof deutsch connector with plug-and-play harness, internal ballast, and starter; With clear borosilicate hardened glass lens, knurled aiming knob for a 15 degree adjustment, and an IP-65 rated, black die-cast aluminum housing; Features a parabolic aluminized reflector for 30 percent more light output than conventional reflectors; Easy installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXHID-6502 |
Vision X |
$349.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 5710 SERIES HALOGEN DRIVING LIGHT, SQUARE, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 12 volts; 8.3 ampere draw; 1,800 lumens; 7 x 5.5 x 4.75 in.; DOT approved; Euro beam; Includes 100 watts halogen bulb with 400-hour lifespan, black street legal cover, and weatherproof deutsch connector with plug-and-play harness; With clear borosilicate hardened glass lens, parabolic aluminized reflector for 30 percent more light output than conventional reflectors, knurled aiming knob for a 15 degree adjustment, and an IP-65 rated, hi-impact, black nylon housing; Features a long-life pure tungsten filament, and a tungsten halogen-hybrid light with an oversized glass globe for better heat dissipation; Upgradable to HID and is 100 percent compatible with HID accessories; Easy 2-wire installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXVX-5710NH |
Vision X |
$80.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X XMITTER LED DRIVING LIGHT BAR, SQUARE, CLEAR PLASTIC LENS, SOLD INDIVIDUALLY -- 9 to 32 volts; 12 watts; 1 ampere draw at 12 volts; 720 lumens; 4 in.; DOT approved; Euro beam; Includes four 3-watts LED lights with 100 percent acrylic lens and 50,000-hour lifespan, and weatherproof deutsch connector with plug-and-play harness; With clear polycarbonate lens, stainless steel U bracket stud mount, and rubber shock isolator for vibration control; Made with die-cast aluminum end caps and an IP-67 rated, black, extruded 6061 aluminum housing; Features a patent pending integrated mounting system, allowing each mount to slide along the lower extrusion to match any existing mounting holes, and for horizontal and vertical adjustment; Tubing or roll cage mounts sold separately in pairs; Easy 2-wire installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXXIL-40 |
Vision X |
$139.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 6500 SERIES HID DRIVING LIGHT, ROUND, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 9 to 32 volts; 2.92 ampere draw; 3,500 lumens; 5,000 K; 6.7 x 7 x 6 in.; DOT approved; Flood beam; Includes 35 watts HID bulb with 2500-hour lifespan, black street legal cover, weatherproof deutsch connector with plug-and-play harness, internal ballast, and starter; With clear borosilicate hardened glass lens, knurled aiming knob for a 15 degree adjustment, and an IP-65 rated, black die-cast aluminum housing; Features a parabolic aluminized reflector for 30 percent more light output than conventional reflectors; Easy installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXHID-6501 |
Vision X |
$349.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 6510 SERIES HALOGEN DRIVING LIGHT, ROUND, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 12 volts; 8.3 ampere draw; 1,800 lumens; 6.7 x 7 x 6 in.; DOT approved; Euro beam; Includes 100 watts halogen bulb with 400-hour lifespan, black street legal cover, and weatherproof deutsch connector with plug-and-play harness; With clear borosilicate hardened glass lens, parabolic aluminized reflector for 30 percent more light output than conventional reflectors, knurled aiming knob for a 15 degree adjustment, and an IP-65 rated, black die-cast aluminum housing; Features a long-life pure tungsten filament, and a tungsten halogen-hybrid light with an oversized glass globe for better heat dissipation; Upgradable to HID and is 100 percent compatible with HID accessories; Easy installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXVX-6510 |
Vision X |
$150.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 5500 SERIES HID DRIVING LIGHT, ROUND, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 9 to 32 volts; 2.9 ampere draw; 3,500 lumens; 5,000 K; 5.5 x 6.56 x 5.25 in.; DOT approved; Euro beam; Includes 35 watts HID bulb with 2500-hour lifespan, weatherproof deutsch connector with wire harness, internal ballast, and starter; With adjustable single stud mount base, clear borosilicate hardened glass lens, and an IP-65 rated, hi-impact, black nylon housing; Features a parabolic aluminized reflector for 30 percent more light output than conventional reflectors; Easy installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXHID-5500 |
Vision X |
$219.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 6600 SERIES HID DRIVING LIGHT, SQUARE, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 9 to 32 volts; 4.17 ampere draw; 5,000 lumens; 5,000 K; 6.38 x 7.75 x 8.25 in.; DOT approved; Spot beam; Includes 50 watts HID bulb with 2500-hour lifespan, weatherproof deutsch connector with wire harness, internal ballast, and starter; With adjustable single stud mount base, clear borosilicate hardened glass lens, and an IP-65 rated, hi-impact, black nylon housing; Features a parabolic aluminized reflector for 30 percent more light output than conventional reflectors; Easy installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXHID-6602 |
Vision X |
$339.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X HALOGEN DRIVING LIGHTS, ROUND, CLEAR GLASS LENS, SET OF 2 -- 12 volts; 4.58 ampere draw; 3 x 2.4 x 2.7 in.; DOT approved; Includes replaceable 55 watts superwhite beam halogen bulbs with 250-hour lifespan, and wiring harness; With clear borosilicate hardened glass lenses and waterproof, black die-cast aluminum housings; Features multi-surface reflectors for 30 percent more light output than conventional ones; Easy installation; With 1-year Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXVX-5B |
Vision X |
$60.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 60 WATT SOLSTICE SERIES LED DRIVING LIGHT, ROUND, CLEAR PLASTIC LENS, SOLD INDIVIDUALLY -- 9 to 50 volts; 60 watts; 5 ampere draw; 4,800 lumens; 3.5 x 4 x 6.75 in.; 6 in. diameter; DOT approved; Medium 15 degree beam; Includes six 88 percent 10-watt LEDs with 50,000-hour lifespan, weatherproof deutsch connector with plug-and-play harness, and adjustable trunnion bracket mount; With clear polycarbonate lens, and an IP-68 rated, black die-cast aluminum housing; Designed and optimized for cold weather conditions, and for low power consumption; Features vertical fins to maximize heat dissipation; Easy 2-wire installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXXIL-S6102 |
Vision X |
$599.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 4400 SERIES HID DRIVING LIGHT, SQUARE, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 9 to 32 volts; 2.9 ampere draw; 3,500 lumens; 5,000 K; 4.75 x 5.75 x 5 in.; DOT approved; Vertical flood beam; Includes 35 watts HID bulb with 2500-hour lifespan, weatherproof deutsch connector with wire harness, internal ballast, and starter; With adjustable single stud mount base, clear borosilicate hardened glass lens, and an IP-65 rated, hi-impact, black nylon housing; Features a parabolic aluminized reflector for 30 percent more light output than conventional reflectors; Easy installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXHID-4401 |
Vision X |
$199.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 8500 SERIES HID DRIVING LIGHT, ROUND, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 9 to 32 volts; 2.92 ampere draw; 3,500 lumens; 5,000 K; 8.7 x 9 x 5.25 in.; DOT approved; Euro beam; Includes 35 watts HID bulb with 2500-hour lifespan, black street legal cover, weatherproof deutsch connector with plug-and-play harness, internal ballast, and starter; With clear borosilicate hardened glass lens, knurled aiming knob for a 15 degree adjustment, and an IP-65 rated, chrome finished, die-cast aluminum housing; Features a parabolic aluminized reflector for 30 percent more light output than conventional reflectors; Easy 2-wire installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXHID-8500C |
Vision X |
$499.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 4510 SERIES HALOGEN DRIVING LIGHT, SQUARE, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 12 volts; 8.3 ampere draw; 1,800 lumens; 4.25 x 5.13 x 5.63 in.; DOT approved; Flood beam; Includes 100 watts halogen bulb with 400-hour lifespan, black street legal cover, and weatherproof deutsch connector with plug-and-play harness; With clear borosilicate hardened glass lens, multi-surface reflector for 30 percent more light output than conventional reflectors, and an IP-65 rated, black die-cast aluminum housing; Features a long-life pure tungsten filament, and a tungsten halogen-hybrid light with an oversized glass globe for better heat dissipation; Upgradable to HID and is 100 percent compatible with HID accessories; Easy 2-wire installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXVX-4511 |
Vision X |
$140.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 6500 SERIES HID DRIVING LIGHT, ROUND, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 9 to 32 volts; 4.17 ampere draw; 5,000 lumens; 5,000 K; 6.7 x 7 x 6 in.; DOT approved; Spot beam; Includes 50 watts HID bulb with 2500-hour lifespan, black street legal cover, weatherproof deutsch connector with plug-and-play harness, internal ballast, and starter; With clear borosilicate hardened glass lens, knurled aiming knob for a 15 degree adjustment, and an IP-65 rated, chrome finished, die-cast aluminum housing; Features a parabolic aluminized reflector for 30 percent more light output than conventional reflectors; Easy installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXHID-6552C |
Vision X |
$499.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 8550 SERIES HID DRIVING LIGHT, ROUND, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 9 to 32 volts; 4.17 ampere draw; 5,000 lumens; 5,000 K; 8.7 x 9 x 5.25 in.; DOT approved; Euro beam; Includes 35 watts HID bulb with 2500-hour lifespan, black street legal cover, weatherproof deutsch connector with plug-and-play harness, internal ballast, and starter; With clear borosilicate hardened glass lens, knurled aiming knob for a 15 degree adjustment, and an IP-65 rated, black die-cast aluminum housing; Features a parabolic aluminized reflector for 30 percent more light output than conventional reflectors; Easy 2-wire installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXHID-8550 |
Vision X |
$449.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 5710 SERIES HALOGEN DRIVING LIGHT, SQUARE, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 12 volts; 8.3 ampere draw; 1,800 lumens; 7 x 5.5 x 4.75 in.; DOT approved; Spot beam; Includes 100 watts halogen bulb with 400-hour lifespan, black street legal cover, and weatherproof deutsch connector with plug-and-play harness; With clear borosilicate hardened glass lens, parabolic aluminized reflector for 30 percent more light output than conventional reflectors, knurled aiming knob for a 15 degree adjustment, and an IP-65 rated, black die-cast aluminum housing; Features a long-life pure tungsten filament, and a tungsten halogen-hybrid light with an oversized glass globe for better heat dissipation; Upgradable to HID and is 100 percent compatible with HID accessories; Easy 2-wire installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXVX-5712 |
Vision X |
$175.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 8510 SERIES HALOGEN DRIVING LIGHT, ROUND, CLEAR GLASS LENS, SOLD INDIVIDUALLY -- 12 volts; 8.3 ampere draw; 1,800 lumens; 8.7 x 7 x 5.25 in.; DOT approved; Euro beam; Includes 100 watts halogen bulb with 400-hour lifespan, black street legal cover, and weatherproof deutsch connector with plug-and-play harness; With clear borosilicate hardened glass lens, parabolic aluminized reflector for 30 percent more light output than conventional reflectors, knurled aiming knob for a 15 degree adjustment, and an IP-65 rated, black die-cast aluminum housing; Features a long-life pure tungsten filament, and a tungsten halogen-hybrid light with an oversized glass globe for better heat dissipation; Upgradable to HID and is 100 percent compatible with HID accessories; Easy installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXVX-8510 |
Vision X |
$175.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X XMITTER LED DRIVING LIGHT BAR, RECTANGULAR, CLEAR PLASTIC LENS, SOLD INDIVIDUALLY -- 9 to 32 volts; 36 watts; 3 ampere draw at 12 volts; 2,160 lumens; 7.8 in.; DOT approved; Euro beam; Includes twelve 3-watts LED lights with 100 percent acrylic lens and 50,000-hour lifespan, and weatherproof deutsch connector with plug-and-play harness; With clear polycarbonate lens, stainless steel U bracket stud mount, and rubber shock isolator for vibration control; Made with die-cast aluminum end caps and an IP-67 rated, black, extruded 6061 aluminum housing; Features a patent pending integrated mounting system, allowing each mount to slide along the lower extrusion to match any existing mounting holes, and for horizontal and vertical adjustment; Tubing or roll cage mounts sold separately in pairs; Easy 2-wire installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXXIL-120 |
Vision X |
$279.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X 40 WATT SOLSTICE SERIES LED DRIVING LIGHT, SQUARE, CLEAR PLASTIC LENS, SOLD INDIVIDUALLY -- 9 to 50 volts; 40 watts; 3.33 ampere draw; 3,200 lumens; 3.5 x 4 x 6.75 in.; DOT approved; Narrow 10 degree beam; Includes four 88 percent 10-watt LEDs with 50,000-hour lifespan, weatherproof deutsch connector with plug-and-play harness, and adjustable trunnion bracket mount; With clear polycarbonate lens, and an IP-68 rated, black die-cast aluminum housing; Designed and optimized for cold weather conditions, and for low power consumption; Features vertical fins to maximize heat dissipation; Easy 2-wire installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXXIL-S4100 |
Vision X |
$449.00 |
|
|
|
|
|
1975-1980 Chevrolet P10 Vision X Driving Light
VISION X XMITTER LED DRIVING LIGHT BAR, RECTANGULAR, CLEAR PLASTIC LENS, SOLD INDIVIDUALLY -- 9 to 32 volts; 300 watts; 25 ampere draw at 12 volts; 18,000 lumens; 51.8 in.; DOT approved; Euro beam; Includes one hundred 3-watts LED lights with 100 percent acrylic lens and 50,000-hour lifespan, and weatherproof deutsch connector with plug-and-play harness; With clear polycarbonate lens, stainless steel U bracket stud mount, and rubber shock isolator for vibration control; Made with die-cast aluminum end caps and an IP-67 rated, black, extruded 6061 aluminum housing; Features a patent pending integrated mounting system, allowing each mount to slide along the lower extrusion to match any existing mounting holes, and for horizontal and vertical adjustment; Tubing or roll cage mounts sold separately in pairs; Easy 2-wire installation; With lifetime Vision X limited warranty.
| Part Number |
Brand |
Price |
|
| VSXXIL-1000 |
Vision X |
$1,599.00 |
|
|
|
