|
|
1991-1995 Toyota MR2 K&N - K&N 57 Generation I Cold Air Intake
K&N 57 SERIES GENERATION I FIPK COLD AIR INTAKE SYSTEM
K&N's 57 Series Generation I FIPK (Fuel Injection Performance Kit) cold air intake system is designed to significantly reduce intake restriction as it smoothens and straightens air flow resulting to additional power and torque. It is custom engineered and aerodynamically designed to drive more air into your engine. Its air filter is made of multiple interwoven layers of surgical cotton gauze infused or charged with oil for outstanding filtration and airflow.
Specifications- Cotton gauze filter material
- Oiled filter element
- Without heat shield
- Without tube
Features- Washable and reusable air filter
- Can go up to 100,000 miles between cleanings depending on driving conditions
Notes- Product legal for sale in California under Executive Order (EO) number D-269-8. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.
| Part Number |
Brand |
Price |
 |
| K33579001 |
K&N |
$149.96 |
|
|
|
|
2000-2005 Toyota MR2 Spyder K&N - K&N 57I Generation II Cold Air Intake
K&N 57I SERIES PERFORMANCE INDUCTION KIT, GENERATION II -- Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states; Built Primarily For European Vehicles, Uses Only Non-Metallic Rotationally Molded Tubes, Reduces Air Temperature And Decreases Intake Sound Over A Metal Tube, Engineered To Increase Power And Acceleration, Replaces The Restrictive Factory Air Filter And Air Intake Housing, Comes With A Washable And Reusable Cone Air Filter That Lasts Longer, Works With Original Equipment Manufacturer Computer System, Easy Installation, With Manufacturer's Limited Million Mile Warranty
| Part Number |
Brand |
Price |
|
| K3357I9002 |
K&N |
$179.83 |
|
|
|
|
1987-1989 Toyota MR2 K&N - K&N 57I Generation I Cold Air Intake
K&N 57I SERIES GENERATION I PERFORMANCE INDUCTION KIT
K&N's 57i Series Generation I performance induction kit is designed to increase your vehicle's power and acceleration throughout the RPM range. It features an extra surface area that captures and holds more dirt. It works with OE computer system and replaces your restrictive OE air filter and box. It also features a washable and reusable air filter made of multiple interwoven layers of surgical cotton gauze that is infused or charged with oil for outstanding filtration and airflow.
Specifications- Cotton gauze filter material
- Oiled filter element
- Without heat shield
- Black tube finish
- Plastic tube material
Features- Washable and reusable air filter
- Can go up to 100,000 miles between cleanings depending on driving conditions
Notes- Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
| Part Number |
Brand |
Price |
|
| K33570120 |
K&N |
$108.23 |
|
|
|
|
1985 Toyota MR2 K&N - K&N 57I Generation I Cold Air Intake
K&N 57I SERIES GENERATION I PERFORMANCE INDUCTION KIT
K&N's 57i Series Generation I performance induction kit is designed to increase your vehicle's power and acceleration throughout the RPM range. It features an extra surface area that captures and holds more dirt. It works with OE computer system and replaces your restrictive OE air filter and box. It also features a washable and reusable air filter made of multiple interwoven layers of surgical cotton gauze that is infused or charged with oil for outstanding filtration and airflow.
Specifications- Cotton gauze filter material
- Oiled filter element
- Without heat shield
- Black tube finish
- Plastic tube material
Features- Washable and reusable air filter
- Can go up to 100,000 miles between cleanings depending on driving conditions
Notes- Not legal in California and other states adopting California Emissions Standards; Not for sale or use in California and other states adopting California Emissions Standards; Cannot be shipped to California and such states
| Part Number |
Brand |
Price |
|
| K33570063 |
K&N |
$66.41 |
|
|
|
|
2000-2005 Toyota MR2 Spyder AEM Air Cold Air Intake
AEM COLD AIR INDUCTION SYSTEM -- Up to 99.52 percent filtration efficiency; Includes polished intake tube, gray synthetic air filter, and a complete mounting kit with comprehensive installation instructions for a perfect fit; Engineered to produce maximum horsepower and torque by strategically locating the air filter in the coolest and safest section of the engine compartment; Features Dryflow Synthetic Air Filter that is proven to be highly efficient in fine dust testing, filtering dirt as small as one micron; Its mandrel-bent inlet pipe is constructed out of light but durable T-6063 aluminum with reinforced TIG-welded brackets and fittings for maximum flow and added durability; Manufactured and assembled in the USA. Product legal for sale in California under Executive Order (EO) number D-670. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.
| Part Number |
Brand |
Price |
|
| A1821462P |
AEM Air |
$260.01 |
|
|
|
|
|
2000-2005 Toyota MR2 Spyder AEM Air Cold Air Intake
AEM COLD AIR INDUCTION SYSTEM
AEM's Cold Air Induction System is engineered to produce maximum horsepower and torque by strategically locating the air filter in the coolest and safest section of the engine compartment. It features dry flow synthetic air filter that is proven to be highly efficient in fine dust testing and filtering dirt as small as one micron. Its mandrel-bent inlet pipe is constructed out of light but durable T-6063 aluminum with reinforced TIG-welded brackets and fittings for maximum flow and added durability.
Specifications- Synthetic filter material
- Dry filter element
- Without heat shield
- Red tube finish
- T-6063 aluminum tube material
Features- Mandrel-bent tubing
- Washable and reusable air filter
- Manufactured and assembled in the U.S.A.
Notes- Product legal for sale in California under Executive Order (EO) number D-670. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.
| Part Number |
Brand |
Price |
|
| A1821462R |
AEM Air |
$260.01 |
|
|
|
|
|
2000-2005 Toyota MR2 Spyder AEM Air Cold Air Intake
AEM COLD AIR INDUCTION SYSTEM
AEM's Cold Air Induction System is engineered to produce maximum horsepower and torque by strategically locating the air filter in the coolest and safest section of the engine compartment. It features dry flow synthetic air filter that is proven to be highly efficient in fine dust testing and filtering dirt as small as one micron. Its mandrel-bent inlet pipe is constructed out of light but durable T-6063 aluminum with reinforced TIG-welded brackets and fittings for maximum flow and added durability.
Specifications- Synthetic filter material
- Dry filter element
- Without heat shield
- Gunmetal gray tube finish
- T-6063 aluminum tube material
Features- Mandrel-bent tubing
- Washable and reusable air filter
- Manufactured and assembled in the U.S.A.
Notes- Product legal for sale in California under Executive Order (EO) number D-670. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.
| Part Number |
Brand |
Price |
|
| A1821462C |
AEM Air |
$260.01 |
|
|
|
|
|
2000-2005 Toyota MR2 Spyder AEM Air Cold Air Intake
AEM COLD AIR INDUCTION SYSTEM
AEM's Cold Air Induction System is engineered to produce maximum horsepower and torque by strategically locating the air filter in the coolest and safest section of the engine compartment. It features dry flow synthetic air filter that is proven to be highly efficient in fine dust testing and filtering dirt as small as one micron. Its mandrel-bent inlet pipe is constructed out of light but durable T-6063 aluminum with reinforced TIG-welded brackets and fittings for maximum flow and added durability.
Specifications- Synthetic filter material
- Dry filter element
- Without heat shield
- Blue tube finish
- T-6063 aluminum tube material
Features- Mandrel-bent tubing
- Washable and reusable air filter
- Manufactured and assembled in the U.S.A.
Notes- Product legal for sale in California under Executive Order (EO) number D-670. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.
| Part Number |
Brand |
Price |
|
| A1821462B |
AEM Air |
$260.01 |
|
|
