|
|
1988-1992 Audi 80 Quattro Eastern Catalytic Converter
EASTERN CATALYTIC CONVERTER
Eastern catalytic converters are constructed using Eastern's proprietary NANO technology chemistry that yields highly efficient loadings for lower cost and better converter efficiency. It features high flow design that maximizes engine output and catalytic efficiency.
Specifications- 3-way catalyst style
- 4,250 lb GVW
- Without air tube provision and oxygen sensor port
- Round body
- 5 x 5 x 8 in. body, 12 in. overall length
- 2 in. inlet diameter
- 2 in. outlet diameter
- Single inlet and outlet configuration
Notes- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses
- Non-directional and can be installed either way
- Modification of the exhaust is required
| Part Number |
Brand |
Price |
 |
| EAST70247 |
Eastern |
$56.01 |
|
|
|
|
1988-1992 Audi 80 Quattro Eastern Catalytic Converter
EASTERN CATALYTIC CONVERTER
Eastern catalytic converters feature proprietary catalytic chemistry and high flow design that maximizes engine output and catalytic efficiency. Built to exact OE dimensions with OE quality flanges and flex assemblies.
Specifications- 3-way catalyst style
- 3-bolt welded type inlet
- With one 18 mm style oxygen sensor port
- Round body
- 23 in. overall length
- 2 in. outlet diameter
- Single inlet and outlet configuration
Notes- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses
- Easy installation
- No welding and cutting required
| Part Number |
Brand |
Price |
|
| EAST40171 |
Eastern |
$114.87 |
|
|
|
|
1988-1992 Audi 80 Quattro Magnaflow - Magnaflow 53100 Catalytic Converter
MAGNAFLOW 53100 SERIES CATALYTIC CONVERTER
This series of Magnaflow catalytic converter contains the same internal components as the 53000 series in a shorter body length for use where space is limited. Made from heavy gauge stainless steel, tip to tip, this catalytic converter has a ribbed body that minimizes expansion and distortion when it heats up. It has the strongest and smoothest flowing inlet and outlet joint and uses a monolithic honeycomb catalyst. It is also seam welded close to the converter body for a strong, tight bond.
Specifications- 3-way catalyst style
- 4,250 lbs. GVW
- With one oxygen sensor port
- Round body
- One unit may cover a wide variety of vehicle makes and models
- 8 in. L x 5.13 in. W, 12.63 in. overall length
- 2 in. inlet diameter
- 2 in. outlet diameter
- Single inlet and outlet configuration
Notes- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses
- May require additional welding for optimal installation
| Part Number |
Brand |
Price |
|
| M6653134 |
Magnaflow |
$77.27 |
|
|
|
|
1988-1992 Audi 80 Quattro Magnaflow - Magnaflow 53000 Catalytic Converter
MAGNAFLOW 53000 SERIES CATALYTIC CONVERTER
This series of Magnaflow catalytic converter contains a metallic substrate for optimum CFM flow and maximum durability. It is designed for small displacement engines or as a front converter in dual converter systems. Made from heavy gauge stainless steel, tip to tip, this catalytic converter has a ribbed body that minimizes expansion and distortion when it heats up. It has the strongest and smoothest flowing inlet and outlet joint and uses a monolithic honeycomb catalyst. It is also seam welded close to the converter body for a strong, tight bond.
Specifications- 3-way catalyst style
- 4,250 lbs. GVW
- With one oxygen sensor port
- Round body
- One unit may cover a wide variety of vehicle makes and models
- 9 in. L x 5.13 in. W x 4 in. H, 13 in. overall length
- 2 in. inlet diameter
- 2 in. outlet diameter
- Single inlet and outlet configuration
Notes- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses
- May require additional welding for optimal installation
| Part Number |
Brand |
Price |
|
| M6653034 |
Magnaflow |
$77.27 |
|
|
|
|
1988-1992 Audi 80 Quattro Magnaflow - Magnaflow 36000 Pc-1 Catalytic Converter
MAGNAFLOW 36000 PC-1 SERIES CATALYTIC CONVERTER
This OEM grade CatSMART catalytic converter is ideal for use on passenger cars with only one catalytic converter per exhaust bank. Magnaflow's CatSMART engineering eliminates false fail catalyst-related diagnostic codes by addressing specific oxygen storage capacity needs. Developed to meet even the most stringent tail pipe emissions and made from heavy gauge stainless steel, tip to tip, this catalytic converter has a ribbed body that minimizes expansion and distortion when it heats up. It has the strongest and smoothest flowing inlet and outlet joint and uses a monolithic honeycomb catalyst. It is also seam welded close to the converter body for a strong, tight bond. Above all, it has an optimized PGM loading and wash coat formulation that addresses the needs of today's computer controlled On-Board Diagnostic-equipped vehicles.
Specifications- 3-way catalyst style
- Round body
- 2 in. inlet diameter
- 2 in. outlet diameter
- 11 in. L x 5.13 in. W x 5.13 in. H, 15 in. overall length
- With one oxygen sensor port
Notes- Direct fit catalytic converter legal for sale in California under Executive Order (EO) number D-193-86. Before purchasing this product, please check the Executive Order at www.arb.ca.gov to verify whether this product is allowed for installation on your specific vehicle application.
- May require additional welding for optimal installation
- One unit may cover a wide variety of vehicle makes and models
| Part Number |
Brand |
Price |
|
| M6636034 |
Magnaflow |
$219.13 |
|
|
|
|
|
1988-1992 Audi 80 Quattro Benchmark Catalytic Converter
BENCHMARK CATALYTIC CONVERTER ASSEMBLY
Benchmark catalytic converters are considered to be the industry's standard replacement catalytic converter. It is the recognized leader in fitment and durability. It features perfect fit and repeatability and its performance results are continually monitored by Benchmark's internal emissions laboratory to insure quality loadings which eliminate OBDII issues caused by many universal catalysts.
Specifications- With one oxygen sensor port
- Standard assembly with one catalytic converter
Notes- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses
| Part Number |
Brand |
Price |
|
| BEN81307 |
Benchmark |
$294.71 |
|
|
|
|
|
1988-1992 Audi 80 Quattro Benchmark Catalytic Converter
BENCHMARK CATALYTIC CONVERTER ASSEMBLY
Benchmark catalytic converters are considered to be the industry's standard replacement catalytic converter. It is the recognized leader in fitment and durability. It features perfect fit and repeatability and its performance results are continually monitored by Benchmark's internal emissions laboratory to insure quality loadings which eliminate OBDII issues caused by many universal catalysts.
Specifications- Flange inlet
- With one oxygen sensor port
- Standard assembly with one catalytic converter
- Round body
- Single inlet and outlet configuration
Notes- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses
| Part Number |
Brand |
Price |
|
| BEN1307 |
Benchmark |
$210.94 |
|
|
|
|
1989-1992 Audi 80 Quattro Bosal Catalytic Converter
BOSAL CATALYTIC CONVERTER ASSEMBLY
Bosal catalytic converters are made to fit vehicle-specific requirements for backpressure, emissions, sound levels, and sensors. Designed and built for long life reliability.
Specifications- Flange inlet
- Standard assembly with one catalytic converter
- Oval body
Notes- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses
| Part Number |
Brand |
Price |
|
| BO0992441 |
Bosal |
$232.70 |
|
|
|
|
|
1988 Audi 80 Quattro Bosal Catalytic Converter
BOSAL CATALYTIC CONVERTER ASSEMBLY
Bosal catalytic converters are made to fit vehicle-specific requirements for backpressure, emissions, sound levels, and sensors. Designed and built for long life reliability.
Specifications- Flange inlet
- Standard assembly with one catalytic converter
- Oval body
Notes- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses
| Part Number |
Brand |
Price |
|
| BO0992441 |
Bosal |
$232.70 |
|
|
|
|
1988-1992 Audi 80 Quattro Replacement Oxygen Sensor
UNIVERSAL OXYGEN SENSOR, HEATED, 3-WIRE, SOLD INDIVIDUALLY
This REPLACEMENT oxygen sensor features stainless steel shell, hex nut, shield, Teflon-covered insulated wires, high-temperature rubber internal and external seals, and threaded tube coated with anti-seize compound. Includes easy-to-follow instructions.
Specifications:- 6.69 in. wire length
- Includes butt type connectors, without plug
- Designed to fit screw-in type bungs
Benefits:- Tested to ensure highest level of quality and reliability
- Helps reduce harmful emissions and extends catalyst life
Notes: May not be compatible with flanges. May require minor modifications.
| Part Number |
Brand |
Price |
|
| USOS-3000 |
Replacement |
$36.43 |
|
|
|
|
1988-1992 Audi 80 Quattro Replacement Oxygen Sensor
OXYGEN SENSOR, HEATED, 3-WIRE, SOLD INDIVIDUALLY
This REPLACEMENT oxygen sensor features stainless steel shell, hex nut, shield, Teflon-covered insulated wires, high-temperature rubber internal and external seals, and threaded tube coated with anti-seize compound. Includes easy-to-follow instructions.
Specifications:- 48 in. wire length
- Threaded-in type, male connector
Benefits:- Tested to ensure highest level of quality and reliability
- Helps reduce harmful emissions and extends catalyst life
| Part Number |
Brand |
Price |
|
| ARBV960902 |
Replacement |
$70.00 |
|
|
|
|
1988-1992 Audi 80 Quattro Replacement Oxygen Sensor
OXYGEN SENSOR, HEATED, 3-WIRE, SOLD INDIVIDUALLY
This REPLACEMENT oxygen sensor features stainless steel shell, hex nut, shield, Teflon-covered insulated wires, high-temperature rubber internal and external seals, and threaded tube coated with anti-seize compound. Includes easy-to-follow instructions.
Specifications:- 0-1 V, 47.6 in. wire length
- Threaded-in type, male connector
Benefits:- Tested to ensure highest level of quality and reliability
- Helps reduce harmful emissions and extends catalyst life
Notes: Without oxygen sensor bug.
| Part Number |
Brand |
Price |
|
| REPV960907 |
Replacement |
$41.37 |
|
|
|
|
1988-1992 Audi 80 Quattro Bosch Oxygen Sensor
BOSCH REGULAR CLASS OXYGEN SENSOR
Bosch Regular Class Oxygen Sensor provides submersible patented connection system that protects against contamination, withstands the effects of extreme temperatures, and engine vibration. Made to improve engine performance, prevents premature failure for catalytic converter, and reduces harmful emissions.
Specifications:- 3-wire
- 25.6 in. wire length
- 0-1 V
- Heated
- Thread-in mounting style
- Includes wiring harness
Features:
- Manufactured with a two-foot length sensor wire
- Uses a submersible patented connection system that protects against contamination and withstands the effects of extreme temperatures and engine vibration
- Posi-lock connectors that can be unscrewed and reconnected in case of a wiring mistake
Does not include oxygen sensor bung. Wire splicing required.
| Part Number |
Brand |
Price |
|
| BS15735 |
Bosch |
$48.66 |
|
|
|
|
1988-1992 Audi 80 Quattro Bosch Oxygen Sensor
BOSCH SUPER CLASS OXYGEN SENSOR
Bosch Super Class Oxygen Sensor provides patented catalytically activated fine particle filter that prevents contamination for extended life and ensures precise voltage to the engine's emission control computer, while a second filter doubles protection against exhaust gas contamination that increase sensors life.
Specifications:- 3-wire
- 47.6 in. wire length
- 0-1 V
- Heated
- Male connector
- Thread-in mounting style
- Includes wiring harness
Features:
- Constructed of premium ceramic technology that incorporates Zirconium or Titania and Yttrium for superior protection against mechanical and thermal shock
- Patented catalytically activated fine particle filter prevents contamination for extended life and ensures precise voltage to the engine's emission control computer, while a second filter doubles protection against exhaust gas contamination, thereby increasing sensor life
- Prevents premature failure of the catalytic converter
- Snug fitting OE-style silicone boots ensure proper fit, function, and appearance
- Rigorously tested for perfect performance while saving money in fuel costs
Direct plug-in, no cutting or splicing required. Does not include oxygen sensor bung.
| Part Number |
Brand |
Price |
|
| BS13957 |
Bosch |
$70.47 |
|
|
|
|
|
1988-1992 Audi 80 Quattro Walker Catalytic Converter
WALKER CATALYTIC CONVERTER
Walker catalytic converter features stainless steel body, aluminized expandable bushings and heat shield for enhanced strength and durability.
Features- Has broad application coverage
- Higher loaded substrate
- Round body
- Modification of the exhaust is required
Notes- 49-state legal; Not for sale or use in California; Cannot be shipped to California addresses
| Part Number |
Brand |
Price |
|
| WK15196 |
Walker |
$94.69 |
|
|
|
|
1988-1992 Audi 80 Quattro Denso Oxygen Sensor
DENSO REGULAR CLASS OXYGEN SENSOR
Denso Regular Class Oxygen Sensors are specifically designed to meet the challenging demands of today's engines. Each of Denso's Oxygen Sensor is constructed from the highest quality materials available. Manufactured to the OE standards and subjected to rigorous safety and performance tests.
Specifications:- 3-wire
- 11.77 in. lead wire
- Non-flanged
Features:- Constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum, and ceramics
- Double protection layer
- Aluminum oxide trap layer
- Porous PTFE filter
- Stainless steel housing
1 required per vehicle. Requires wire splicing and electrical installation. Reuse your old connector.
| Part Number |
Brand |
Price |
|
| NP2343000 |
Denso |
$42.47 |
|
|
|
|
1988-1992 Audi 80 Quattro Denso Oxygen Sensor
DENSO SUPER CLASS FIRST TIME FIT OXYGEN SENSOR
Denso Super Class First Time Fit Oxygen Sensors are specifically designed to meet the challenging demands of today's engines. Each of Denso's Oxygen Sensor is constructed from the highest quality materials available. Manufactured to the OE standards and subjected to rigorous safety and performance tests.
Specifications:- 3-wire
- 49.49 in. lead wire
Features:- Constructed from high quality stainless steel, porous polytetrafluoroethylene, fluorine rubber, aluminum oxide, high-grade platinum, and ceramics
- Double protection layer
- Aluminum oxide trap layer
- Porous PTFE filter
- Stainless steel housing
1 required per vehicle. This part does not require wire cutting.
| Part Number |
Brand |
Price |
|
| NP2343048 |
Denso |
$125.29 |
|
|
|
|
|
1988-1992 Audi 80 Quattro Walker Products Oxygen Sensor
WALKER PRODUCTS OXYGEN SENSOR, 3-WIRE -- A high quality, direct fit OE replacement oxygen sensor; Improves car's engine response and gas mileage; Effectively lowers emissions upon replacing its tired old oxygen sensor; Exceeds OE specifications and test requirements; OE part number 034906265F.
| Part Number |
Brand |
Price |
|
| 25023048 |
Walker Products |
$87.50 |
|
|
|
|
|
1988-1992 Audi 80 Quattro NTK Oxygen Sensor
NTK SUPER CLASS OE IDENTICAL OXYGEN SENSOR
NTK Oxygen Sensor combines expertise with innovation in order to control the fuel and ignition systems to optimize a car's performance in the areas of emissions and fuel economy.
Specifications:- 3-wire
- 47.83 in. wire length
- Non-flanged
- Heated
Features:- Precision manufactured with a sensing element incorporating NTK's premier technical ceramics
- Delivers superior fit, form, and function
- Extensively tested to guarantee quality and reliability
Does not include oxygen sensor bung. Supplied with a factory-fitted OEM connector for easy installation. Direct plug-in, no cutting or splicing required.
| Part Number |
Brand |
Price |
|
| NG25040 |
NTK |
$66.28 |
|
|
|
|
|
1991-1992 Audi 80 Quattro Standard Oxygen Sensor
STANDARD OXYGEN SENSOR
3-wire, 21.4 in. length, 1 male and 1 female electrical connectors, 2 male blade and 1 female blade socket terminal, Zirconia design; A high quality, OE replacement oxygen sensor.
| Part Number |
Brand |
Price |
|
| SISG90 |
Standard |
$80.50 |
|
|
|
|
|
1988-1992 Audi 80 Quattro Standard Oxygen Sensor
Standard Oxygen Sensor Standard have been renowned in engineering and distributing an across-the-board line of quality replacement parts. Standard continue their dedication in keeping incomparable service and manufacturing innovative merchandises for numerous vehicle applications. Standard Oxygen Sensors are constructed from strict manufacturing courses and test equipments that guarantee proper function and durability. These Oxygen Sensors are built to operate along with the other components in the vehicle system for your utmost road experience. Specifications: - 3 Terminal wire
- Female Teriminal
- Butt Connector Terminal Type
| Part Number |
Brand |
Price |
|
| SISG36 |
Standard |
$44.61 |
|
|
|
|
|
1988-1989 Audi 80 Quattro Standard Oxygen Sensor
STANDARD OXYGEN SENSOR, SOLD INDIVIDUALLY -- 3 terminals; A high quality, direct fit OE replacement oxygen sensor; With 90-day or 3,000-mile Standard limited warranty.
| Part Number |
Brand |
Price |
|
| SISG47 |
Standard |
$87.99 |
|
|
|
|
|
1988-1992 Audi 80 Quattro Emico Catalytic Converter
Emico Catalytic Converters
This Converter is NOT approved for Sale or Use in California - See EPA/CARB Regulation:
Emico catalytic converters are quality direct fit that are manufactured to high quality standards using O.E. production processes. Emico Converters are made from high quality stainless steel, and use the factory mounting points which do not require "fitting" and "sealing". The exterior tubes are bent using the mandrel bender, which prevents tube cross sections from deforming and wrinkling.- Duracat technology for outstanding longevity
- 100% OE manufacturing process
- OE Style Mounting for Easy Installation
- OE Designed Flanges
- Heavy Duty Stainless Steel Construction
Installation Note: The manufacturer recommends the replacement of the oxygen sensor(s) when replacing the catalyst.
EPA/CARB Regulation: This Catalytic Converter is NOT CARB Approved and is not approved for sale or use in vehicles manufactured for or registered in the State of California. Do not install this Catalytic Converter in California emission vehicles within or outside the State of California.
Warranty Information: Emico Technologies Inc. warrants that its catalytic converter is free from defects in materials and workmanship. Emico Converters have been designed and manufactured to meet US EPA and California CARB requirements, and when the vehicle is properly maintained, the catalytic converter is warranted to meet such requirements for 25,000 miles from the time of installation. The stainless steel body and the end pipes are separately warranted for 5 years or 50,000 miles from the time of installation.
NOT Legal in California
| Part Number |
Brand |
Price |
|
| W0133-1902801 |
Emico |
$202.95 |
|
|
