|
|
1966-1973 Jeep Jeepster Replacement Oxygen Sensor
UNIVERSAL OXYGEN SENSOR, UNHEATED, 1-WIRE, SOLD INDIVIDUALLY
This REPLACEMENT oxygen sensor features stainless steel shell, hex nut, shield, Teflon-covered insulated wire, and high-temperature rubber internal and external seals. Includes easy-to-follow instructions.
Specifications:- 6.3 in. wire length
- Includes butt type connector, without plug
- Designed to fit screw-in type bungs
Benefits:- Tested to ensure highest level of quality and reliability
- Helps reduce harmful emissions and extends catalyst life
Notes: May not be compatible with flanges. May require minor modifications.
| Part Number |
Brand |
Price |
 |
| USOS-1000 |
Replacement |
$19.91 |
|
|
|
|
1966-1973 Jeep Jeepster Replacement Antenna
UNIVERSAL FENDER MOUNT ANTENNA, POWER, POLISHED STAINLESS STEEL -- 5-section mast; 12-volt; 3 wires; 1200 mm cable; 800 mm extension; A high quality universal fender mount antenna; May require modification or other adjustment to your vehicle upon installation; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| RB501608 |
Replacement |
$53.87 |
|
|
|
|
1966-1973 Jeep Jeepster Replacement Antenna
UNIVERSAL FENDER MOUNT ANTENNA, MANUAL, STAINLESS STEEL, POLISHED -- 1-section mast; 1200 mm cable; 780 mm extension; A high quality universal fender mount antenna; May require modification or other adjustment to your vehicle upon installation; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| RB501605 |
Replacement |
$9.08 |
|
|
|
|
1966-1973 Jeep Jeepster Replacement Antenna
UNIVERSAL PILLAR SIDE MOUNT ANTENNA, MANUAL, STAINLESS STEEL, POLISHED -- 3-section mast; 1200 mm cable; A high quality universal pillar side mount antenna; May require modification or other adjustment to your vehicle upon installation; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| RB501402 |
Replacement |
$6.14 |
|
|
|
|
1966-1973 Jeep Jeepster Replacement Antenna
UNIVERSAL FENDER MOUNT ANTENNA, MANUAL, BLACK -- 1-section mast; 1200 mm cable; 400 mm extension; Male connector; A high quality universal fender mount antenna; May require modification or other adjustment to your vehicle upon installation; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| RB501603 |
Replacement |
$10.02 |
|
|
|
|
1966-1973 Jeep Jeepster Replacement Antenna
UNIVERSAL FENDER MOUNT ANTENNA, MANUAL, BLACK -- 1-section mast; 1200 mm cable; 400 mm extension; Plug-in type; A high quality universal fender mount antenna; May require modification or other adjustment to your vehicle upon installation; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| RB501604 |
Replacement |
$9.00 |
|
|
|
|
1966-1973 Jeep Jeepster Replacement Antenna
UNIVERSAL FENDER MOUNT ANTENNA, MANUAL, STAINLESS STEEL, POLISHED -- A high quality universal fender mount antenna; May require modification or other adjustment to your vehicle upon installation; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| RB501602 |
Replacement |
$9.01 |
|
|
|
|
1966-1973 Jeep Jeepster Replacement Antenna
UNIVERSAL PILLAR SIDE MOUNT ANTENNA, MANUAL, STAINLESS STEEL, POLISHED -- 4-section mast; 2600 mm cable; A high quality pillar side mount antenna; May require modification or other adjustment to your vehicle upon installation; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| RB501404 |
Replacement |
$12.92 |
|
|
|
|
1966-1973 Jeep Jeepster Replacement Antenna
UNIVERSAL WINDSCREEN MOUNT ANTENNA, MANUAL, BLACK -- 1-section mast; 2100 mm cable; 370 mm extension; Electronically amplified; A high quality universal windscreen mount antenna; May require modification or other adjustment to your vehicle upon installation; Backed by 1-year, unlimited-mileage warranty.
| Part Number |
Brand |
Price |
|
| RB502101 |
Replacement |
$13.46 |
|
|
|
|
|
1972-1973 Jeep Jeepster MSD Spark Plug Wire
MSD SUPER CONDUCTOR SPARK PLUG WIRES, RED, SET OF 6
MSD Super Conductor Spark Plug Wires ultimate performance provides extreme low resistance combined with the ability to suppress high EMI. Made of DuPont Kevlar conductor for increased tensile strength and durable outer sleeve for resistance to high heat or abrasion.
Specifications:- 8.5 mm diameter
- Two-in-one
- Non-assembled
- RFI suppression
- Male/HEI and female/socket distributor terminal ends
- Eight multi-angle spark plug boot ends
- Gray distributor boot and spark plug boot
- Silicone distributor boot and spark plug boot material
- Spiral core conductor style
Features:- Ferro-magnetic impregnated core that creates an effective EMI choke
- DuPont Kevlar material conductor for increased tensile strength and durable outer sleeve for resistance to high heat or abrasion
- Tough and high heat sleeve design that provides excellent abrasion protection
- Dual crimp terminals provide the strongest connections to the wire and lock to the spark plug terminal
Terminals for engines with early type socket and late type HEI spark plug top distributor caps.
| Part Number |
Brand |
Price |
|
| M4631179 |
MSD |
$86.11 |
|
|
|
|
1966-1973 Jeep Jeepster Bolton Premiere Antenna
BOLTON PREMIERE UNIVERSAL IMITATION ANTENNA, MANUAL, BLACK -- 1-section mast; 470 mm extension; Stick-on; A high quality universal imitation antenna; May require modification or other adjustment to your vehicle upon installation; Backed by 1-year, unlimited-mileage Bolton Premiere warranty.
| Part Number |
Brand |
Price |
|
| RB502201 |
Bolton Premiere |
$4.97 |
|
|
|
|
1972-1973 Jeep Jeepster Mallory Ignition Module
MALLORY HYFIRE HEI MODULE -- A New High Output HEI Module That Offers More Performance And Features Than Any Module Available, Has A Built In Rev-Limiter-4,000 To 8,500 RPM, Has A Higher RPM Capability And More Accurate Timing, Reduces High RPM Retard Inherent With Other HEI Modules, Produces More Current Translating To More Spark Energy To Fire The Plugs, Includes A Specially Extended Dwell Circuitry That Ensures A Hotter Spark Over A Broad RPM Range, Comes With A 4 Pin Module, Works On 4, 6, And 8 Cylinder Coil In Cap HEI Distributors, With Mallory's 1-Year Limited Warranty
| Part Number |
Brand |
Price |
|
| M11699 |
Mallory |
$163.80 |
|
|
|
|
|
1966-1973 Jeep Jeepster Omix Seat Belt
OMIX SEAT BELT HARNESS FLOOR MOUNT -- With oval washer and welded nut; A high quality, OE replacement seat belt harness floor mount.
| Part Number |
Brand |
Price |
|
| O321320206 |
Omix |
$7.78 |
|
|
|
|
|
1966-1973 Jeep Jeepster Omix Seat Belt
OMIX SEAT BELT HARNESS FLOOR MOUNT -- With round washer and welded nut; A high quality, OE replacement seat belt harness floor mount.
| Part Number |
Brand |
Price |
|
| O321320205 |
Omix |
$8.09 |
|
|
|
|
|
1972-1973 Jeep Jeepster Mallory Ignition Coil
MALLORY STREET PERFORMANCE IGNITION COIL, CHROME -- 1.4 ohms primary resistance, 10K ohms secondary resistance, 58,000 V maximum voltage, 6.6 mH inductance, 180 mA peak current, 300 uS spark duration, 112:1 turns ratio; 12 V coil improves performance of breaker point ignition systems; Features oil-filled design and arc-resistant alkyd top that deliver superior performance, insulation and cooling; Internal design eliminates the need for a separate ballast resistor; Specifically designed to deliver optimum performance when use with Mallory Points Type Distributors; Fits most original equipment coil brackets, or use Mallory super duty coil bracket 29221 or 29244; Not for use with Mallory HYFIRE Electronic Ignition Control or any other high energy, inductive storage or CD ignition system; With 1-year Mallory limited warranty.
| Part Number |
Brand |
Price |
|
| M1129217 |
Mallory |
$54.65 |
|
|
|
|
|
1972-1973 Jeep Jeepster Mallory Ignition Coil
MALLORY STREET PERFORMANCE IGNITION COIL, CHROME -- 0.7 ohms primary resistance, 8.9K ohms secondary resistance, 51,000 V maximum voltage, 6.6 mH inductance, 180 mA peak current, 400 uS spark duration, 99:1 turns ratio; 12 V coil improves performance of breaker point ignition systems; Features oil-filled design and arc-resistant alkyd top that deliver superior performance, insulation and cooling; Internal design eliminates the need for a separate ballast resistor; Specifically designed to deliver optimum performance when use with Mallory UNILITE or Magnetic Breakerless Distributors equipped with CD ignition, Mallory HYFIRE IV and VI Series Electronic Ignition Controls and OE breakerless electronic ignition systems; Fits most original equipment coil brackets, or use Mallory super duty coil bracket 29221 or 29244; Not For Use With Mallory HYFIRE Electronic Ignition Control Part Numbers 629, 630, 693, 29026, 29062A, 29028, 29029, 29037 or any other high energy, inductive storage ignition system; With 1-year Mallory limited warranty.
| Part Number |
Brand |
Price |
|
| M1129216 |
Mallory |
$56.14 |
|
|
|
|
|
1972-1973 Jeep Jeepster Mallory Ignition Coil
MALLORY PROMASTER CLASSIC SERIES COIL, BLACK -- Canister style coil, Male/HEI coil wire attachment, universal street and strip for points type distributors and for street-driven vehicles with breaker point ignition; Mounting bracket included; Features faster rise time and increased spark duration increases performance compared to stock, glass-filled polyester case and oil-filled construction assure long life and no energy loss from arcing; Effective to approximately 6500 rpm depending on the engine combination; Offers a better wire retention with spark plug type secondary post and brass contact terminals; Not for use with Mallory HYFIRE Series electronic ignition controls; 50-state legal; With 1-year Mallory limited warranty.
| Part Number |
Brand |
Price |
|
| M1128720 |
Mallory |
$125.99 |
|
|
|
|
|
1972-1973 Jeep Jeepster Mallory Ignition Conversion Kit
MALLORY E-SPARK CONVERSION KIT -- Uses Specialized Electronic Circuitry And Infrared Signal Translating To Stable Ignition Timing From 1 RPM To 10,000 RPM, Improves Performance And Fuel Efficiency, Features The Latest Thermal Clad Based Surface Mount Construction For Maximum Dependability And Durability, Reduces Maintenance, Easy Installation, For Use With Mallory Automotive, Industrial, And Marine Distributors With Mechanical Advance Only, With Mallory's 1-Year Limited Warranty
| Part Number |
Brand |
Price |
|
| M1161004M |
Mallory |
$71.39 |
|
|
|
|
|
1972-1973 Jeep Jeepster Mallory Ignition Conversion Kit
MALLORY E-SPARK CONVERSION KIT -- Uses Specialized Electronic Circuitry And Infrared Signal Translating To Stable Ignition Timing From 1 RPM To 10,000 RPM, Improves Performance And Fuel Efficiency, Features The Latest Thermal Clad Based Surface Mount Construction For Maximum Dependability And Durability, Reduces Maintenance, Easy Installation, For Use With Mallory Automotive, Industrial, And Marine Distributors With Mechanical Advance Only, With Mallory's 1-Year Limited Warranty
| Part Number |
Brand |
Price |
|
| M1161005M |
Mallory |
$71.39 |
|
|
|
|
|
1972-1973 Jeep Jeepster Mallory Ignition Conversion Kit
MALLORY E-SPARK KIT -- Left Hand Rotation, Eliminates Constant Point And Condenser Maintenance, Improves Performance And Fuel Efficiency, With Mallory's 1-Year Limited Warranty
| Part Number |
Brand |
Price |
|
| M1161010M |
Mallory |
$75.59 |
|
|
|
|
|
1972-1973 Jeep Jeepster Mallory Spark Plug Wire
MALLORY PRO SIDEWINDER SPARK PLUG WIRES, RED, SET OF 8
Mallory Pro Sidewinder Spark Plug Wires are the latest and most advanced wires produced by Mallory. Special construction provides the RFI suppression needed for electronic ignition, radio, and computer operation without interference. High temperature silicone jacket withstands more than 500 degrees Fahrenheit.
Specifications:- 8 mm diameter
- Non-assembled
- Male/HEI and female/socket distributor terminal ends
- Eight 90 degrees spark plug boot ends
- Black distributor boot and spark plug boot
- Silicone distributor boot and spark plug boot material
- Spiral core conductor style
- Includes coil wire
Features:- Ozone-resistant red silicone jacket repels water, oil, grease, and fuel
- Withstands temperatures up to 500 degrees
- Low 300 ohms per foot resistance spiral core that delivers high energy output for maximum spark at the plug
- Great RFI suppression meets the demand of today's on-board electronics such as electronic ignition, sound systems, and computer controls
| Part Number |
Brand |
Price |
|
| M11937 |
Mallory |
$81.89 |
|
|
|
|
|
1972-1973 Jeep Jeepster Mallory Spark Plug Wire
MALLORY PRO SIDEWINDER SPARK PLUG WIRES, RED, SET OF 8
Mallory Pro Sidewinder Spark Plug Wires are the latest and most advanced wires produced by Mallory. Special construction provides the RFI suppression needed for electronic ignition, radio, and computer operation without interference. High temperature silicone jacket withstands more than 500 degrees Fahrenheit.
Specifications:- 8 mm diameter
- Non-assembled
- Male/HEI and female/socket distributor terminal ends
- Eight straight spark plug boot ends
- Black distributor boot and spark plug boot
- Silicone distributor boot and spark plug boot material
- Spiral core conductor style
- Includes coil wire
Features:- Ozone-resistant red silicone jacket repels water, oil, grease, and fuel
- Withstands temperatures up to 500 degrees
- Low 300 ohms per foot resistance spiral core that delivers high energy output for maximum spark at the plug
- Great RFI suppression meets the demand of today's on-board electronics such as electronic ignition, sound systems, and computer controls
| Part Number |
Brand |
Price |
|
| M11938 |
Mallory |
$84.23 |
|
|
|
|
|
1972-1973 Jeep Jeepster Mallory Spark Plug Wire
MALLORY PRO SIDEWINDER SPARK PLUG WIRES, RED, SET OF 8
Mallory Pro Sidewinder Spark Plug Wires are the latest and most advanced wires produced by Mallory. Special construction provides the RFI suppression needed for electronic ignition, radio, and computer operation without interference. High temperature silicone jacket withstands more than 500 degrees Fahrenheit.
Specifications:- 8 mm diameter
- Non-assembled
- Male/HEI and female/socket distributor terminal ends
- Eight 45 degree spark plug boot ends
- Black distributor boot and spark plug boot
- Silicone distributor boot and spark plug boot material
- Spiral core conductor style
- Includes coil wire
Features:- Ozone-resistant red silicone jacket repels water, oil, grease, and fuel
- Withstands temperatures up to 500 degrees
- Low 300 ohms per foot resistance spiral core that delivers high energy output for maximum spark at the plug
- Great RFI suppression meets the demand of today's on-board electronics such as electronic ignition, sound systems, and computer controls
| Part Number |
Brand |
Price |
|
| M11947 |
Mallory |
$81.89 |
|
|
|
|
|
1972-1973 Jeep Jeepster Mallory Spark Plug Wire
MALLORY PRO WIRE SILICONE JACKETED WIRES, BLACK, SET OF 8
Mallory Pro Wire Series Spark Plug Wire offers high tech CIF core for great energy delivery at an affordable price providing RFI suppression for even the most sensitive on-board electronics such as electronic ignition, sound systems, and computer controls.
Specifications:- 8 mm diameter
- Non-assembled
- Male/HEI and female/socket distributor terminal ends
- Eight 90 degrees spark plug boot ends
- Black distributor boot
- Red spark plug boot
- Silicone distributor boot and spark plug boot material
- Spiral core conductor style
- Includes coil wire
Features:- 9-strand stainless steel inner core for maximum strength and fatigue resistance
- 7-strand silver-plated copper wire outer core layer for the ultimate in conductivity and spark
- Ozone-resistant black silicone jacket repels water, oil, grease, and fuel
- Withstands temperatures up to 500 degrees
- Low 300 ohms per foot resistance spiral core that delivers high energy output for maximum spark at the plug
| Part Number |
Brand |
Price |
|
| M11775 |
Mallory |
$45.89 |
|
|
|
|
1972-1973 Jeep Jeepster Mallory Spark Plug Wire
MALLORY PRO WIRE SILICONE JACKETED WIRES, BLACK, SET OF 8
Mallory Pro Wire Series Spark Plug Wire offers high tech CIF core for great energy delivery at an affordable price providing RFI suppression for even the most sensitive on-board electronics such as electronic ignition, sound systems, and computer controls.
Specifications:- 8 mm diameter
- Non-assembled
- Male/HEI and female/socket distributor terminal ends
- Eight 45 degree spark plug boot ends
- Black distributor boot
- Red spark plug boot
- Silicone distributor boot and spark plug boot material
- Spiral core conductor style
- Includes coil wire
Features:- 9-strand stainless steel inner core for maximum strength and fatigue resistance
- 7-strand silver-plated copper wire outer core layer for the ultimate in conductivity and spark
- Ozone-resistant black silicone jacket repels water, oil, grease, and fuel
- Withstands temperatures up to 500 degrees
- Low 300 ohms per foot resistance spiral core that delivers high energy output for maximum spark at the plug
| Part Number |
Brand |
Price |
|
| M11703 |
Mallory |
$57.84 |
|
|
|
|
|
1972-1973 Jeep Jeepster Mallory Spark Plug Wire
MALLORY PRO WIRE SILICONE JACKETED WIRES, BLACK, SET OF 8
Mallory Pro Wire Series Spark Plug Wire offers high tech CIF core for great energy delivery at an affordable price providing RFI suppression for even the most sensitive on-board electronics such as electronic ignition, sound systems, and computer controls.
Specifications:- 8 mm diameter
- 90 degree spark plug boot ends
- Silicone distributor boot and spark plug boot material
Features:- 9-strand stainless steel inner core for maximum strength and fatigue resistance
- 7-strand silver-plated copper wire outer core layer for the ultimate in conductivity and spark
- Ozone-resistant black silicone jacket repels water, oil, grease, and fuel
- Withstands temperatures up to 500 degrees
- Low 300 ohms per foot resistance spiral core that delivers high energy output for maximum spark at the plug
For use in racing. Requires solid core wire.
| Part Number |
Brand |
Price |
|
| M11783M |
Mallory |
$67.01 |
|
|
|
|
|
1966-1973 Jeep Jeepster Omix Thermostat
OMIX THERMOSTAT, 180 DEGREE -- A high quality, direct fit OE replacement thermostat; Replaces part number 905594; With Omix limited warranty.
| Part Number |
Brand |
Price |
|
| O321710602 |
Omix |
$5.06 |
|
|
|
|
|
1966-1973 Jeep Jeepster Omix Thermostat
OMIX THERMOSTAT -- 160 degrees; A high quality thermostat.
| Part Number |
Brand |
Price |
|
| O321710601 |
Omix |
$6.13 |
|
|
|
|
1966-1973 Jeep Jeepster Bolton Premiere Seat Belt
BOLTON PREMIERE UNIVERSAL RACING SEAT BELT, 6-POINT, RED, SOLD INDIVIDUALLY -- Includes harness with latch link release mechanism; Manufactured from high quality and durable material to enhance the appearance and performance of your racing seat belt; This seat belt may require modification or other adjustments to your vehicle upon installation; With 1-year, unlimited-mileage Bolton Premiere warranty.
| Part Number |
Brand |
Price |
|
| US-RSBELT-2 |
Bolton Premiere |
$59.42 |
|
|
|
|
|
1972-1973 Jeep Jeepster Mr Gasket Radiator Cap
MR GASKET THERMOCAP RADIATOR CAP, BLUE -- Domestic, 16 psi; OEM replacement with built-in thermostat; Fits most domestic and import vehicles; Constructed with built-in calibrated thermometer that indicates coolant temperature in Fahrenheit and Centigrade readings; Features an integrated coolant reclamation valve that works with all OEM coolant recovery systems; Helps prevent coolant injuries and improves underhood appearance; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G122471B |
Mr Gasket |
$26.95 |
|
|
|
|
|
1972-1973 Jeep Jeepster Mr Gasket Radiator Cap
MR GASKET THERMOCAP RADIATOR CAP, RED -- Domestic, 16 psi; OEM replacement with built-in thermostat; Fits most domestic and import vehicles; Constructed with built-in calibrated thermometer that indicates coolant temperature in Fahrenheit and Centigrade readings; Features an integrated coolant reclamation valve that works with all OEM coolant recovery systems; Helps prevent coolant injuries and improves underhood appearance; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G122471R |
Mr Gasket |
$29.23 |
|
|
|
|
|
1966-1971 Jeep Jeepster Mr Gasket Radiator Cap
MR GASKET DOMESTIC THERMOCAP RADIATOR CAP, BLUE -- 13 psi; Integrated reclamation valve; A replacement radiator cap with a built-in calibrated thermometer that indicates the coolant temperature; Helps to prevent coolant injuries and improves under hood appearance; With 90-day Mr Gasket limited warranty.
| Part Number |
Brand |
Price |
|
| G122470B |
Mr Gasket |
$30.80 |
|
|
|
|
|
1966-1971 Jeep Jeepster Mr Gasket Radiator Cap
MR GASKET DOMESTIC THERMOCAP RADIATOR CAP, SILVER -- 13 psi; Integrated coolant reclamation valve; A replacement radiator cap with a built-in calibrated thermometer that indicates the coolant temperature; Helps to prevent coolant injuries and improves under hood appearance.
| Part Number |
Brand |
Price |
|
| G122470S |
Mr Gasket |
$30.52 |
|
|
|
|
|
1972-1973 Jeep Jeepster Mr Gasket Radiator Cap
MR GASKET THERMOCAP RADIATOR CAP, SILVER -- Domestic, 16 psi; OEM replacement with built-in thermostat; Fits most domestic and import vehicles; Constructed with built-in calibrated thermometer that indicates coolant temperature in Fahrenheit and Centigrade readings; Features an integrated coolant reclamation valve that works with all OEM coolant recovery systems; Helps prevent coolant injuries and improves underhood appearance; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G122471S |
Mr Gasket |
$29.60 |
|
|
|
|
|
1972-1973 Jeep Jeepster Mr Gasket Radiator Cap
MR GASKET THERMOCAP RADIATOR CAP, BLACK -- Domestic, 16 psi; OEM replacement with built-in thermostat; Fits most domestic and import vehicles; Constructed with built-in calibrated thermometer that indicates coolant temperature in Fahrenheit and Centigrade readings; Features an integrated coolant reclamation valve that works with all OEM coolant recovery systems; Helps prevent coolant injuries and improves underhood appearance; With Mr. Gasket's limited 90-day warranty.
| Part Number |
Brand |
Price |
|
| G122476BK |
Mr Gasket |
$28.78 |
|
|
|
|
|
1966-1971 Jeep Jeepster Mr Gasket Radiator Cap
MR GASKET DOMESTIC THERMOCAP RADIATOR CAP, RED -- 13 psi; Integrated reclamation valve; A replacement radiator cap with a built-in calibrated thermometer that indicates the coolant temperature; Helps to prevent coolant injuries and improves under hood appearance; With 90-day Mr Gasket limited warranty.
| Part Number |
Brand |
Price |
|
| G122470R |
Mr Gasket |
$30.80 |
|
|
|
|
|
1966-1973 Jeep Jeepster MBRP - Mbrp Performance Muffler
MBRP DIESEL PERFORMANCE MUFFLER
MBRP's Diesel Performance muffler is a high flow performing and great sounding muffler. It features spiral louver design for accelerated gas flow, durable long lasting core and high density packing. Guaranteed to withstand the most extreme conditions and use.
Specifications- 24 in. length, 31 in. overall length
- 5 in. inlet diameter
- Single center inlet
- 5 in. outlet diameter
- Single center outlet
- Round body
- Aluminized steel muffler material
Features
| Part Number |
Brand |
Price |
|
| M79M2050 |
MBRP |
$134.99 |
|
|
|
|
|
1971-1973 Jeep Jeepster Hayden Oil Cooler
HAYDEN ULTRA-COOL TRANSMISSION OIL COOLER, ALUMINUM -- 5 in. H, 12.5 in. L, 0.75 in. thick, 15.88 in. L, 12.12 in. core L, 0.38 in. push-on fitting, 0.38 in. inlet and outlet size, nipple inlet and outlet attachment, tube and fin style, light duty; An effective and economical way to keep the transmission at its optimal operating temperature; Features internal turbulation for efficient heat transfer and push-on fittings for quick and easy installation; Ultrasonically soldered for reliability; 100 percent pressure tested at 150 psi for quality assurance; Ideal for vehicles up to full size; Available in six sizes to fit a wide range of applications; Designed to fit up to full size vehicles and towing up to 2,500 lbs; With 1-year or 12,000-mile Hayden limited warranty.
| Part Number |
Brand |
Price |
|
| HY402 |
Hayden |
$32.87 |
|
|
|
|
|
1971-1973 Jeep Jeepster Hayden Oil Cooler
HAYDEN ULTRA-COOL TRANSMISSION OIL COOLER, ALUMINUM -- 5 in. H, 12.5 in. L, 0.75 in. thick, 15.88 in. L, 12.12 in. core L, 0.38 in. push-on fitting, 0.38 in. inlet and outlet size, nipple inlet and outlet attachment, tube and fin style, light duty; An effective and economical way to keep the transmission at its optimal operating temperature; Features internal turbulation for efficient heat transfer and push-on fittings for quick and easy installation; Ultrasonically soldered for reliability; 100 percent pressure tested at 150 psi for quality assurance; Ideal for vehicles up to full size; Available in six sizes to fit a wide range of applications; Designed to fit up to full size vehicles and towing up to 2,500 lbs; With 1-year or 12,000-mile Hayden limited warranty.
| Part Number |
Brand |
Price |
|
| HY402 |
Hayden |
$32.87 |
|
|
|
|
|
1966-1973 Jeep Jeepster Hayden Oil Cooler
HAYDEN ULTRA-COOL TRANSMISSION OIL COOLER, ALUMINUM -- 5 in. H, 12.5 in. L, 0.75 in. thick, 15.88 in. L, 12.12 in. core L, 0.38 in. push-on fitting, 0.38 in. inlet and outlet size, nipple inlet and outlet attachment, tube and fin style, light duty; An effective and economical way to keep the transmission at its optimal operating temperature; Features internal turbulation for efficient heat transfer and push-on fittings for quick and easy installation; Ultrasonically soldered for reliability; 100 percent pressure tested at 150 psi for quality assurance; Ideal for vehicles up to full size; Available in six sizes to fit a wide range of applications; Designed to fit up to full size vehicles and towing up to 2,500 lbs; With 1-year or 12,000-mile Hayden limited warranty.
| Part Number |
Brand |
Price |
|
| HY402 |
Hayden |
$32.87 |
|
|
|
|
|
1972-1973 Jeep Jeepster Hayden Oil Cooler
ULTRA COOL TRANSMISSION OIL COOLER, UNIVERSAL -- 3/4 Thick, 10" Height, 15 7/8" Length, 3/8" Push-on Fitting Size, Ideal For Vehicles Up To "A" Class Motor Homes, Towing Up To 5000 Lbs., Effective And Economical Way To Keep The Transmission At Its Optimal Operating Temperature, High Efficiency Turbulators In Each Tube Direct The Fluid For Superior Heat Transfer
| Part Number |
Brand |
Price |
|
| HY405 |
Hayden |
$52.55 |
|
|
|
|
|
1972-1973 Jeep Jeepster Hayden Oil Cooler
HAYDEN ULTRA-COOL SERIES UNIVERSAL ENGINE OIL COOLER -- 3/4 in. Thickness, 7 1/2 in. Height, 15 7/8 in. Length, 12 1/8 in. Core, 3/8 in. Push-On Fitting Size, Ideal For Vehicles Up To Full Size, Towing Up To 2500 lbs., Effective And Economical Way To Keep The Transmission At Its Optimal Operating Temperature, High Efficiency Turbulators In Each Tube Direct The Fluid For Superior Heat Transfer, Ultrasonically Soldered For Reliability, 100% Pressure Tested At 150 PSI For Quality Assurance
| Part Number |
Brand |
Price |
|
| HY404 |
Hayden |
$41.79 |
|
|
|
|
|
1972-1973 Jeep Jeepster Hayden Oil Cooler
HAYDEN ULTRA-COOL SERIES UNIVERSAL ENGINE OIL COOLER -- 3/4 in. Thickness, 7 1/2 in. Height, 15 7/8 in. Length, 12 1/8 in. Core, 3/8 in. Push-On Fitting Size, Ideal For Vehicles Up To Full Size, Towing Up To 2500 lbs., Effective And Economical Way To Keep The Transmission At Its Optimal Operating Temperature, High Efficiency Turbulators In Each Tube Direct The Fluid For Superior Heat Transfer, Ultrasonically Soldered For Reliability, 100% Pressure Tested At 150 PSI For Quality Assurance
| Part Number |
Brand |
Price |
|
| HY404 |
Hayden |
$41.79 |
|
|
|
|
|
1972-1973 Jeep Jeepster Hayden Oil Cooler
ULTRA COOL TRANSMISSION OIL COOLER, UNIVERSAL -- 3/4 Thick, 10" Height, 15 7/8" Length, 3/8" Push-on Fitting Size, Ideal For Vehicles Up To "A" Class Motor Homes, Towing Up To 5000 Lbs., Effective And Economical Way To Keep The Transmission At Its Optimal Operating Temperature, High Efficiency Turbulators In Each Tube Direct The Fluid For Superior Heat Transfer
| Part Number |
Brand |
Price |
|
| HY405 |
Hayden |
$52.55 |
|
|
|
|
|
1971-1973 Jeep Jeepster Hayden Oil Cooler
HAYDEN ULTRA-COOL TRANSMISSION OIL COOLER, ALUMINUM -- 7.5 in. H, 12.5 in. L, 0.75 in. thick, 12.5 in. L, 8.75 in. core L, 0.38 in. push-on fitting, 0.38 in. inlet and outlet size, nipple inlet and outlet attachment, tube and fin style, light duty; An effective and economical way to keep the transmission at its optimal operating temperature; Features internal turbulation for efficient heat transfer and push-on fittings for quick and easy installation; Ultrasonically soldered for reliability; 100 percent pressure tested at 150 psi for quality assurance; Ideal for vehicles up to full size; Available in six sizes to fit a wide range of applications; Designed to fit up to full size vehicles and towing up to 2,500 lbs; With 1-year or 12,000-mile Hayden limited warranty.
| Part Number |
Brand |
Price |
|
| HY403 |
Hayden |
$37.19 |
|
|
|
|
|
1972-1973 Jeep Jeepster Hayden Oil Cooler
ULTRA COOL TRANSMISSION OIL COOLER, UNIVERSAL -- 3/4 Thick, 10" Height, 15 7/8" Length, 3/8" Push-on Fitting Size, Ideal For Vehicles Up To "A" Class Motor Homes, Towing Up To 5000 Lbs., Effective And Economical Way To Keep The Transmission At Its Optimal Operating Temperature, High Efficiency Turbulators In Each Tube Direct The Fluid For Superior Heat Transfer
| Part Number |
Brand |
Price |
|
| HY405 |
Hayden |
$52.55 |
|
|
|
|
|
1971-1973 Jeep Jeepster Hayden Oil Cooler
HAYDEN ULTRA-COOL TRANSMISSION OIL COOLER, ALUMINUM -- 7.5 in. H, 12.5 in. L, 0.75 in. thick, 12.5 in. L, 8.75 in. core L, 0.38 in. push-on fitting, 0.38 in. inlet and outlet size, nipple inlet and outlet attachment, tube and fin style, light duty; An effective and economical way to keep the transmission at its optimal operating temperature; Features internal turbulation for efficient heat transfer and push-on fittings for quick and easy installation; Ultrasonically soldered for reliability; 100 percent pressure tested at 150 psi for quality assurance; Ideal for vehicles up to full size; Available in six sizes to fit a wide range of applications; Designed to fit up to full size vehicles and towing up to 2,500 lbs; With 1-year or 12,000-mile Hayden limited warranty.
| Part Number |
Brand |
Price |
|
| HY403 |
Hayden |
$37.19 |
|
|
|
|
|
1972-1973 Jeep Jeepster Hayden Oil Cooler
HAYDEN ULTRA-COOL SERIES UNIVERSAL ENGINE OIL COOLER -- 3/4 in. Thickness, 7 1/2 in. Height, 15 7/8 in. Length, 12 1/8 in. Core, 3/8 in. Push-On Fitting Size, Ideal For Vehicles Up To Full Size, Towing Up To 2500 lbs., Effective And Economical Way To Keep The Transmission At Its Optimal Operating Temperature, High Efficiency Turbulators In Each Tube Direct The Fluid For Superior Heat Transfer, Ultrasonically Soldered For Reliability, 100% Pressure Tested At 150 PSI For Quality Assurance
| Part Number |
Brand |
Price |
|
| HY404 |
Hayden |
$41.79 |
|
|
|
|
|
1966-1973 Jeep Jeepster Hayden Oil Cooler
HAYDEN ULTRA-COOL TRANSMISSION OIL COOLER, ALUMINUM -- 7.5 in. H, 12.5 in. L, 0.75 in. thick, 12.5 in. L, 8.75 in. core L, 0.38 in. push-on fitting, 0.38 in. inlet and outlet size, nipple inlet and outlet attachment, tube and fin style, light duty; An effective and economical way to keep the transmission at its optimal operating temperature; Features internal turbulation for efficient heat transfer and push-on fittings for quick and easy installation; Ultrasonically soldered for reliability; 100 percent pressure tested at 150 psi for quality assurance; Ideal for vehicles up to full size; Available in six sizes to fit a wide range of applications; Designed to fit up to full size vehicles and towing up to 2,500 lbs; With 1-year or 12,000-mile Hayden limited warranty.
| Part Number |
Brand |
Price |
|
| HY403 |
Hayden |
$37.19 |
|
|
|
|
|
1966-1973 Jeep Jeepster Hayden Oil Cooler
HAYDEN ULTRA-COOL SERIES UNIVERSAL ENGINE OIL COOLER -- 3/4 in. Thickness, 7 1/2 in. Height, 12 1/2 in. Length, 8 3/4 in. Core, 1/2 in. Push-On Fitting Size, Lightweight Aluminum Construction, Ideal For Vehicles Up To Full Size, Towing Up To 2500 lbs., Effective And Economical Way To Keep The Transmission At Its Optimal Operating Temperature, High Efficiency Turbulators In Each Tube Direct The Fluid For Superior Heat Transfer, Ultrasonically Soldered For Reliability, 100% Pressure Tested At 150 PSI For Quality Assurance
| Part Number |
Brand |
Price |
|
| HY459 |
Hayden |
$110.36 |
|
|
|
