• Asbestos-free
• Made from a innovative blend of Kevlar fibers and enhanced ceramic particles
• Produces 60-90 percent less dust than OE pads
• Brake bite from cold is as good as OE or better
• Brake performance only increases as the pads heat up
• Built with shims, slots, and chamfers for silent braking
• Coated with Brake-In compound for faster break-in and greater initial braking effect

Part Number	Brand	Price
E35DP31210C	EBC	$152.00

• Intense resistance to fade under load
• Utterly resists brake disc vibration
• Exhibits a dust rating similar to OEM parts
• Shimmed to reduce noise
• Slotted to avoid heat cracks
• Chamfered to minimize low speed noise
• Coated with Brake-In compound for faster break-in and greater initial braking effect

Part Number	Brand	Price
E35DP41210R	EBC	$161.50

• Asbestos-free
• Optimized for both race track and street use
• Excellent brake bite from cold
• Progressive feel
• Bonded to the steel backing plates with multiple high-strength interlock holes and unique chemical interlayer to increase bond strength factor by five
• Chemical interlayer process triples shear resistance versus common organic pads
• Easy on rotors, leaves rotors smooth not scored
• Minimal heat transfer
• Pre-bedded by heat scorching for faster bed-in, beds within 3-4 stops on the race track
• Outfitted with deep V-groves that catches unwanted dirt and dust while improving ventilation
• Impressive lifespan, capable of performing in 4 to 5 race events with total of 30 laps duration or 20,000 miles of street use

Part Number	Brand	Price
E35DP51210NDX	EBC	$170.96

• Manufactured from a semi-metallic compound with aramid soft fibers
• With center slots and edge chamfers plus noise reduction shims on the reverse
• EBC red Brake-In surface coating conditions rotors after installation allowing pads to quickly deliver their stopping power
• Hardware and wear leads included where fitted as standard by factory
• Long lasting high friction pad designed for non-sport urban driving on all sedans, SUVs, and light trucks

Part Number	Brand	Price
E35UD1001	EBC	$67.44

Be protected against car accidents with this retractable, wall-mount type seat belt! It is 1-3/4" wide and 131" when fully extended and can be installed with 10mm mounting bolt.

• 1-3/4 in. width x 131 in. full extended length
• 3.5 x 3.5 x 2.7 in. retractable spool box size
• 13in. center push buckles are included
• With 10mm mounting bolt
• Without air bag sensor
• Wall mount type

Notes:

• It may require modification or other adjustments to your vehicle.

Replacement brand parts are the most affordable solution for your replacement needs! Replacement specializes in body parts and lighting products; it also stocks OE comparable electrical, brakes, suspension, intake, exhaust, cooling and heating parts. All Replacement brand items are backed by 1-year, unlimited-mileage warranty.

Part Number	Brand	Price
US-SBELT	Replacement	$94.42

Be protected against car accidents with this 2-point seat belt! It is 1-3/4" wide and 54" when fully extended and can be installed with 10mm mounting bolt.

• 1-3/4 in. width x 54 in. full extended length
• Without electronic sensor attachments
• Center push buckles included
• With 10mm mounting bolt

Notes:

• It may require modification or other adjustments to your vehicle.

Replacement brand parts are the most affordable solution for your replacement needs! Replacement specializes in body parts and lighting products; it also stocks OE comparable electrical, brakes, suspension, intake, exhaust, cooling and heating parts. All Replacement brand items are backed by 1-year, unlimited-mileage warranty.

Part Number	Brand	Price
US-SBELT-2	Replacement	$23.64

Be protected against car accidents with this 2-point seat belt! It is 1-3/4" wide and 54" when fully extended and can be installed with 10mm mounting bolt.

• Includes center push buckles
• Without electronic sensor attachments
• It may require modification or other adjustments to your vehicle

Location/Orientation:

• Driver and passenger side

Replacement brand parts are the most affordable solution for your replacement needs! Replacement specializes in body parts and lighting products; it also stocks OE comparable electrical, brakes, suspension, intake, exhaust, cooling and heating parts. All Replacement brand items are backed by 1-year, unlimited-mileage warranty.

Part Number	Brand	Price
US-SBELT-2-PLK	Replacement	$47.28

• Conical design
• 5.91 in. wire length
• Includes butt type connectors, without plug
• Designed to fit screw-in type bungs

• Tested to ensure highest level of quality and reliability
• Helps reduce harmful emissions and extends catalyst life

Part Number	Brand	Price
USOS-4000	Replacement	$27.56

• Conical design
• 5.91 in. wire length
• Includes butt type connectors, without plug
• Designed to fit screw-in type bungs

• Tested to ensure highest level of quality and reliability
• Helps reduce harmful emissions and extends catalyst life

Part Number	Brand	Price
USOS-4000	Replacement	$27.56

• 6.69 in. wire length
• Includes butt type connectors, without plug
• Designed to fit screw-in type bungs

• Tested to ensure highest level of quality and reliability
• Helps reduce harmful emissions and extends catalyst life

Part Number	Brand	Price
USOS-3000	Replacement	$36.43

• 15.75 in. wire length
• Threaded-in type, male connector

• Tested to ensure highest level of quality and reliability
• Helps reduce harmful emissions and extends catalyst life

Part Number	Brand	Price
ARBM960917	Replacement	$46.69

• 0-1 V, 15.4 in. wire length
• Threaded-in type, includes connector

• Tested to ensure highest level of quality and reliability
• Helps reduce harmful emissions and extends catalyst life

Part Number	Brand	Price
REPF960904	Replacement	$31.14

• 4-wire
• 15.4 in. wire length
• 0-1 V
• Heated
• Thread-in mounting style
• Includes wiring harness

• Constructed of premium ceramic technology that incorporates Zirconium or Titania and Yttrium for superior protection against mechanical and thermal shock
• Patented catalytically activated fine particle filter prevents contamination for extended life and ensures precise voltage to the engine's emission control computer, while a second filter doubles protection against exhaust gas contamination, thereby increasing sensor life
• Prevents premature failure of the catalytic converter
• Snug fitting OE-style silicone boots ensure proper fit, function, and appearance
• Rigorously tested for perfect performance while saving money in fuel costs

Part Number	Brand	Price
BS15717	Bosch	$40.57

• 4-wire
• 18.9 in. wire length
• 0-1 V
• Heated
• Thread-in mounting style
• Includes wiring harness

• Constructed of premium ceramic technology that incorporates Zirconium or Titania and Yttrium for superior protection against mechanical and thermal shock
• Patented catalytically activated fine particle filter prevents contamination for extended life and ensures precise voltage to the engine's emission control computer, while a second filter doubles protection against exhaust gas contamination, thereby increasing sensor life
• Prevents premature failure of the catalytic converter
• Snug fitting OE-style silicone boots ensure proper fit, function, and appearance
• Rigorously tested for perfect performance while saving money in fuel costs

Part Number	Brand	Price
BS15718	Bosch	$45.45

• OE-Equivalent.
• Direct fit for easy installation.
• OE Style connectors and wire lengths.
• Base ceramic probe of Zirconium and Yttrium.
• Patented Platinum Power Grid.
• Fine particle filter.

Part Number	Brand	Price
W0133-1617862	Bosch	$44.35

• OE-Equivalent.
• Direct fit for easy installation.
• OE Style connectors and wire lengths.
• Base ceramic probe of Zirconium and Yttrium.
• Patented Platinum Power Grid.
• Fine particle filter.

Part Number	Brand	Price
W0133-1617602	Bosch	$45.34

• 4-wire
• 25.6 in. wire length
• 0-1 V
• Heated
• Thread-in mounting style
• Includes wiring harness

• Manufactured with a two-foot length sensor wire
• Uses a submersible patented connection system that protects against contamination and withstands the effects of extreme temperatures and engine vibration
• Posi-lock connectors that can be unscrewed and reconnected in case of a wiring mistake

Part Number	Brand	Price
BS15729	Bosch	$42.78

• OE-Equivalent.
• Direct fit for easy installation.
• OE Style connectors and wire lengths.
• Base ceramic probe of Zirconium and Yttrium.
• Patented Platinum Power Grid.
• Fine particle filter.

Part Number	Brand	Price
W0133-1615467	Bosch	$40.95

• Constructed of premium ceramic technology that incorporates Zirconium or Titania and Yttrium for superior protection against mechanical and thermal shock
• Patented catalytically activated fine particle filter prevents contamination for extended life and ensures precise voltage to the engine's emission control computer, while a second filter doubles protection against exhaust gas contamination, thereby increasing sensor life
• Prevents premature failure of the catalytic converter
• Snug fitting OE-style silicone boots ensure proper fit, function, and appearance
• Rigorously tested for perfect performance while saving money in fuel costs

Part Number	Brand	Price
BS13124	Bosch	$47.34

• Asbestos-free
• Ceramic friction formulation
• precision cut or shaved backing plates with mechanically attached and application specific shims that provide superior noise abatement
• Positively molded and scorched to enhance consistent friction performance across a wide temperature range
• Offers OE performance at an affordable cost

Part Number	Brand	Price
CE105.10010	Centric	$44.71

• Asbestos-free
• Incredible wear and fade resistance
• Scorched for faster break-in
• Produces minimal brake dust for cleaner wheels
• Mechanically-attached shims reduce brake noise
• Secure application-specific fit
• Shorter stopping distance as compared to other standard brake pads
• Stable friction performance across a broad temperature range
• Superior heat recovery under sustained and aggressive braking

Part Number	Brand	Price
CE104.10010	Centric	$33.51

• Asbestos-free
• Special semi-metallic friction formulation
• Offers OE performance at an affordable cost

Part Number	Brand	Price
CE102.10010	Centric	$17.70

• Asbestos-free
• Incredible wear and fade resistance
• Scorched for faster break-in
• Produces minimal brake dust for cleaner wheels
• Mechanically-attached shims reduce brake noise
• Secure application-specific fit
• Shorter stopping distance as compared to other standard brake pads
• Stable friction performance, even at high temperatures
• Low rotor wear
• Superior heat recovery under sustained and aggressive braking

Part Number	Brand	Price
CE106.10010	Centric	$36.12

• Provides superior stopping power with minimal dusting
• Shimmed to reduce brake noise and prevent vibration
• Linear response in either hot or cold operations ensure against jerky sensations when braking

Part Number	Brand	Price
CE300.10010	Centric	$23.88

• Uses fine blank backing plates for correct caliper fitment, even pad wear, and consistent stopping power
• Notched for shims
• 100 percent positive molded for constant material density all throughout the pads
• Manufactured in actual OEM supplier plants using OEM processes, materials and procedures

Part Number	Brand	Price
CE100.10010	Centric	$91.65

• Uses fine blank backing plates for correct caliper fitment, even pad wear, and consistent stopping power
• Notched for shims
• 100 percent positive molded for constant material density all throughout the pads
• Manufactured in actual OEM supplier plants using OEM processes, materials and procedures

Part Number	Brand	Price
CE100.09710	Centric	$35.37

• FMVSS302 and ISO 9001 certified
• Made of 16 lbs. of natural, pliable heavy duty rubber
• Deeply sculpted channels trap water, road salt, mud, and sand
• Designed with anti-skid ridges to prevent shifting in your vehicle
• Will not curl, crack or harden in sub-zero weather
• Can hold up to 1-1/2 quarts of water without spilling
• Intended to give the best possible protection for your vehicle floor

Part Number	Brand	Price
W24W3TN	Weathertech	$69.95

• FMVSS302 and ISO 9001 certified
• Made of 16 lbs. of natural, pliable heavy duty rubber
• Deeply sculpted channels trap water, road salt, mud, and sand
• Designed with anti-skid ridges to prevent shifting in your vehicle
• Will not curl, crack or harden in sub-zero weather
• Can hold up to 1-1/2 quarts of water without spilling
• Intended to give the best possible protection for your vehicle floor

Part Number	Brand	Price
W24W3	Weathertech	$69.95

• FMVSS302 and ISO 9001 certified
• Made of 16 lbs. of natural, pliable heavy duty rubber
• Deeply sculpted channels trap water, road salt, mud, and sand
• Designed with anti-skid ridges to prevent shifting in your vehicle
• Will not curl, crack or harden in sub-zero weather
• Can hold up to 1-1/2 quarts of water without spilling
• Intended to give the best possible protection for your vehicle floor

Part Number	Brand	Price
W24W3GR	Weathertech	$69.95

• FMVSS302 and ISO 9001 certified
• Made of 16 lbs. of natural, pliable heavy duty rubber
• Deeply sculpted channels trap water, road salt, mud, and sand
• Designed with anti-skid ridges to prevent shifting in your vehicle
• Will not curl, crack or harden in sub-zero weather
• Can hold up to 1-1/2 quarts of water without spilling
• Intended to give the best possible protection for your vehicle floor

Part Number	Brand	Price
W24W50GR	Weathertech	$60.00

• FMVSS302 and ISO 9001 certified
• Made of 16 lbs. of natural, pliable heavy duty rubber
• Deeply sculpted channels trap water, road salt, mud, and sand
• Designed with anti-skid ridges to prevent shifting in your vehicle
• Will not curl, crack or harden in sub-zero weather
• Can hold up to 1-1/2 quarts of water without spilling
• Intended to give the best possible protection for your vehicle floor

Part Number	Brand	Price
W24W50BL	Weathertech	$60.00

• FMVSS302 and ISO 9001 certified
• Made of 16 lbs. of natural, pliable heavy duty rubber
• Deeply sculpted channels trap water, road salt, mud, and sand
• Designed with anti-skid ridges to prevent shifting in your vehicle
• Will not curl, crack or harden in sub-zero weather
• Can hold up to 1-1/2 quarts of water without spilling
• Intended to give the best possible protection for your vehicle floor

Part Number	Brand	Price
W24W3BL	Weathertech	$69.95

• 0.59 in. thickness

• Asbestos-free
• Low-dust and long-wearing ceramic compound
• Increased stopping power
• Stable friction output
• Prolongs rotor life

Part Number	Brand	Price
HFHB453Z585	Hawk	$133.39

• 0.59 in. thickness

• Asbestos-free
• Low-dust and long-wear ferro-carbon compound
• Higher coefficient of friction over stock brake pads
• Higher resistance to brake fade than standard replacements
• High friction/torque hot or cold
• Virtually noise free
• Prolonged rotor life

Part Number	Brand	Price
HFHB453F585	Hawk	$129.58

• 100-800F (38-427C) operating temperature range
• 0.59 in. thickness

• Asbestos-free
• Provides exceptional stopping performance across a wide temperature range
• No brake change required

Part Number	Brand	Price
HFHB453N585	Hawk	$151.10

• Asbestos-free
• Ceramic material increases stopping power and dissipates heat
• Offers more strength and durability
• Performs better even under heavy stress while keeping minimal brake noise
• Designed for optimum performance across a wide variety of operating conditions

Part Number	Brand	Price
BFRD1050	Bendix	$31.19

• Asbestos-free
• Low dust formulation
• Integrally molded
• Chamfered

Part Number	Brand	Price
BFD1050	Bendix	$47.07

• Center line slots to prevent cracking
• Minimizes brake dust up to 50 percent compared to standard pads
• Offers more quiet and better braking than pre-ceramic compound pads

Part Number	Brand	Price
KV250101F	Kool Vue	$29.02

• Center line slots to prevent cracking
• Premium grade OEM plus replacement pads
• Minimizes brake dust up to 30 percent compared to standard pads
• Reduces rotor wear up to 50 percent unlike other friction compounds
• Offers noise and brake vibration reduction for an improved braking performance

Part Number	Brand	Price
KV300115F	Kool Vue	$15.88

• With two mirror pockets
• Made from durable polycotton blend
• Designed with flannel underside with soft, napped finish
• Long wearing and 50 percent heavier than gray polycotton fabric
• Allows moisture to evaporate and heat to escape under the cover
• Water, rot, and mildew resistant

Part Number	Brand	Price
C59C16717TF	Covercraft	$226.71

• With two mirror pockets
• Made of solution dyed UV resistant polyester fibers
• 40 percent heavier than regular WeatherShield and has heavier denier thread to provide double the tear and tensile strength
• Provides UV opacity and is breathable to allow moisture and heat to escape under the cover
• Repels water and blocks dust, tree sap, and bird droppings

Part Number	Brand	Price
C59C16717HG	Covercraft	$422.07

• With two mirror pockets
• Made of 4-layer non-woven polypropylene fabric that provides maximum protection in all weather conditions
• Designed with two middle layers of melt-blown fabric that acts as filtration barrier against most airborne pollutants
• Has better impact absorption to help protect your vehicle's finish from nicks, dings, dents, and scratches
• Naturally moisture resistant and is breathable to allow air to circulate through the fabric and to dry easily

Part Number	Brand	Price
C59C16717TK	Covercraft	$194.59

• With two mirror pockets
• Made from fade-resistant, solution-dyed WeatherMax SL fabric
• Designed with a highly water-repellent HydroMax finish on both sides of the fabric to help protect your vehicle against rain while maintaining breathability
• Has superior shape retention and is resistant to sagging because the fibers are designed to have minimal stretch
• Offers more durability and dimensional stability with a luxurious feel
• Provides excellent UV protection and is perfect for everyday use
• Can be easily cleaned in a home washer and dryer

Part Number	Brand	Price
C59C16717UT	Covercraft	$256.95

• With two mirror pockets
• Made of bi-component spunbond protective outer layer, micro-porous middle layer, and paint-protecting inner layer of polyethylene and nylon
• Highly resistant to water, dust, and UV rays
• Breathable to allow moisture and heat to escape under the cover
• Easy to handle and fold
• Made in the USA

Part Number	Brand	Price
C59C16717NH	Covercraft	$225.79

• With two mirror pockets
• Made from fade-resistant, solution-dyed WeatherMax SL fabric
• Designed with a highly water-repellent HydroMax finish on both sides of the fabric to help protect your vehicle against rain while maintaining breathability
• Has superior shape retention and is resistant to sagging because the fibers are designed to have minimal stretch
• Offers more durability and dimensional stability with a luxurious feel
• Provides excellent UV protection and is perfect for everyday use
• Can be easily cleaned in a home washer and dryer

Part Number	Brand	Price
C59C16717UB	Covercraft	$256.95